Manuale d’uso / di manutenzione del prodotto YHT-470 del fabbricante Yamaha
Vai alla pagina of 18
IMPORTANT! Please record the serial number of this unit in the space below. Model: Serial No.: The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
2 SAFETY INSTR UCTIONS 1 Read Instructions – All the safety and operating instructions should be read before the unit is operated. 2 Retain Instructions – The safety and operating instructions should be retained for future reference. 3 Heed Warnings – All warnings on the unit and in the operating instructions should be adhered to.
3 As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personel only. To avoid electrical shock, do not open the unit. Refer servicing to qualified personnel only.
• Before making any connections, switch OFF the power to the unit and the amplifier or other component. • Connect the “LINE OUT” terminals to the “CD” (or “AUX”) terminals of the amplifier. If the amplifier does not have such terminals, use the “TAPE PB” terminals.
FRONT P ANEL 5 IDENTIFICA TION OF COMPONENTS REMO TE CONTROL TRANSMITTER * The control functions on the main unit and on the remote control transmitter are virtually identical, with the exceptions below.
1 2 3 4 Display information at disc play ➀ Shows the track number to be played. ➁ Shows the time displays. (Refer to “Selecting time displays” on page 8.) ➂ Displays the numbers that correspond to the numbers of tracks (as high as number 20) on the disc.
* To resume play, press the PAUSE button again or press the PLAY button. 7 T o stop play temporarily T o stop play completely T o play a desired trac k on the disc DIRECT PLAY Select a desired track using the numeric button. Example: To select track 25 Press ➀ twice, then immediately press ➁ once.
8 Selecting time displays You can select any of the four time displays by pressing the TIME display modeselect button. Note The remaining time ➁ will not be displayed for track number 25 or higher. Changing brightness of the display If desired, you can change brightness of the display in three degrees by pressing the MODE button.
9 RANDOM-SEQUENCE PLA Y You can have the unit play the tracks on a disc in a random sequence selected by the unit’s microcomputer. To perform random-sequence play To cancel random-sequence play Notes • This feature will not function during programming, or during programmed play.
1 Stop the unit. 2 3 Select the desired track. * Repeat step 3 to set more programs. You can select the same track again. 4 10 PR OGRAM PLA Y You can enjoy listening to your favorite tracks in any desired order using programmed play. As many as 25 tracks can be programmed for a disc.
11 1 Select a track which has index numbers. 2 3 Select the desired index number. Notes • Not all discs have index numbers. The index system is a method for sub-dividing tracks into smaller divisions (such as, for example, the movements within classical symphonies) for easier location of those parts.
1 Stop the unit. * The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 15.) 2 Enter the tape’s total possible recording time. You can select any of four tape lengths by pressing the TAPE button.
13 1 Follow steps 1 – 3 on page 12. 2 3 Select the track numbers (to be recorded on side A) in the desired order. * Programmed track numbers are illuminated on the display.
1 Follow steps 1 – 3 on page 12. 2 * The unit will automatically program tracks for side A and side B separately considering the tape’s total time. 3 Begin recording on the tape deck and press the PLAY button on this unit at the same time. 4 The unit will pause at the end of side A of the tape.
15 A utomatic searc hing of the peak level on a disc This convenient feature automatically searches the part on a disc where the source level peaks, and next plays the part repeatedly. For recording to tape, this feature is very helpful to adjust the recording level on the tape deck.
Battery installation Battery replacement If you find that the remote control transmitter must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones. Notes • Use only AA, R6, UM-3 batteries for replacement. • Be sure the polarities are correct.
SYMPTOM The player does not switch ON when the POWER switch is pressed. The disc tray does not close completely. The DISC indicator does not illuminate. Play does not begin. Play is delayed, or begins at the wrong place. No sound. Sound “skips”. Sound “hums”.
VQ02270-0 Printed in Japan BWWR, BB Y AMAHA ELECTRONICS CORPORA TION, USA 6660 ORANGETHORPE A VE., BUENA P ARK, CALIF . 90620, U.S.A. Y AMAHA CANADA MUSIC L TD. 135 MILNER AVE., SCARBOR OUGH, ONT ARIO M1S 3R1, CANADA Y AMAHA ELECTRONIK EUROP A G.m.b.H.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Yamaha YHT-470 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Yamaha YHT-470 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Yamaha YHT-470 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Yamaha YHT-470 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Yamaha YHT-470, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Yamaha YHT-470.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Yamaha YHT-470. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Yamaha YHT-470 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
