Manuale d’uso / di manutenzione del prodotto CDR400At del fabbricante Yamaha
Vai alla pagina of 26
CDR400At SERIES User Guide Guide de I’utilisateur Bedienungsanleitung.
FCC INFORMA TION (U .S.A.) 1. IMPOR T ANT NO TICE: DO NO T MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approv ed by Y amaha may void your authority , granted by the FCC, to use the product.
T his output is value measured at a distance 200mm from the objective lens surface on the optical pick-up block. ANSI Class : Class 1 Material : GaAlAs Wavelength : 782-789 nm Emission Duration : Continuous Laser Output Power : Less than 44.
WARNING i W ARNING ❢ W ARNING ❢ • The temperature where CDR400At is located should be between 5ºC and 40ºC (41ºF – 104ºF), when used in a fan-cooled system. • Do not disassemble the CDR400At cov er to reduce the risk of electric shock. • Alw ays remov e the disc before transporting CDR400At.
Important Precautions ii Impor tant Precautions • Please read the follo wing precautions before attempting to operate the CDR400At. • Before recording a disc, be sure to clean the disc and tray using an air aerosol-type dust remov er . A dust particle on the disc may cause recording to fail, producing an unusable disc.
Table of Contents iii Table of Contents Introduction ............................................................................ 1 CDR400At Features ..................................................... 1 Orange Book Compatible Recording ............
Introduction 1 Intr oduction Thank you for purchasing a Y amaha CDR400At driv e. Please read this manual before using the driv e in order to mak e the best use of the superior CDR400At functions. After reading, please retain this manual for future reference.
Introduction 2 Orange Book Compatible Recording T rack at Once In this mode, data can be recorded to disc one track at a time. Discs recorded in this mode cannot be played in CD players or CD-R OM driv es other than a CD-R drive until the session is closed.
Chapter 1 - System Configuration 3 Chapter 1 - System Configuration Before using the CDR400At, make sure that you ha ve all of the items on the list of included items.
Chapter 1 - System Configuration 4 T ools Discs CD-R Discs On the CDR400At, you can use con v entional CD-R discs that conform to the Recordable Compact Disc Systems Part 2 (Orange Book).
Chapter 2 - Installing the Yamaha CDR400At Drive 5 Chapter 2 - Installing the Y amaha CDR400At Drive CDR400At drive settings Before installing the CDR400At in your computer , you will need to set the following jumpers. Y ou set these jumpers by inserting jumper connectors into the jumper switch located on the rear panel of the CDR driv e.
Chapter 2 - Installing the Yamaha CDR400At Drive 6 Note: When you ar e using W indows 95, and if the SCSI ID setting on the rear panel is the same as the number assigned to another SCSI device, the Plug and Play component of W indows 95 will automatically assign an unused number to the CDR400At (SCAM pr otocol level 1).
Chapter 2 - Installing the Yamaha CDR400At Drive 7 ♦ T erminator setting The terminator setting indicates whether or not this device is the last connected SCSI device. T erminator ON (with a jumper) — Use this setting if the CDR400At is the last device in the internal SCSI daisy-chain.
Chapter 2 - Installing the Yamaha CDR400At Drive 8 Installing the CDR400At drive The following steps will dif fer slightly depending on the type of computer you are using. For details on remo ving the co v er from your computer, and installing or removing internal de vices, refer to the manual for your computer .
Chapter 2 - Installing the Yamaha CDR400At Drive 9 4. Remo ve the front cover of a v acant half-height drive bay . For details refer to the manual of your computer . 5. Remove the SCSI car d, and set the terminator setting of the SCSI internal circuit to the position f or internal connected devices.
Chapter 2 - Installing the Yamaha CDR400At Drive 10 8. Connect the A UDIO cable . Connect the single 4-pin connector (Sound Blaster compatible) to the sound card. Connect the 4-pin connector at the other end of the cable (the larger connector) to the A UDIO OUT connector on the CDR400At drive.
Chapter 2 - Installing the Yamaha CDR400At Drive 11 9. Connect the po wer supply cable. Connect the +12V and +5V 4-pin power cable to the po wer supply interface located on the rear panel of the CDR400At dri ve. The shape of the connector makes it impossible to re verse the connections.
Chapter 2 - Installing the Yamaha CDR400At Drive 12 11. Attach the co ver of your computer . 12 . Connect the power cab le to an A C outlet, and s witc h on y our computer . Make sure that the LED located on the panel of the CDR400At dri ve is lit. 13.
Chapter 3 - Operation 13 Chapter 3 - Operation Front P anel 1 Disc tray The disc is inserted and ejected here. Pressing the eject button will open the tray . 2 Headphone jack This stereo mini jack allows you to connect headphones and listen to audio. 3 Headphone v olume control This control adjusts the volume le vel of the headphone output.
Chapter 3 - Operation 14 Loading a Disc 1. Press the eject b utton to open the tray . 2. Carefull y place the disc, label-side up, on the disc tray . 3.
Chapter 3 - Operation 15 Ejecting the Disc If the CDR400At is powered on: Press the eject button to eject the disc. Note: Y ou cannot eject the disc if the SCSI command pr ohibits the eject opera- tion while the CDR400At is reading data. Caution: Be sur e to r emove the disc after it is completely ejected.
Chapter 3 - Operation 16 Manual Eject (emer gency use) Here we explain ho w to eject the disc when it cannot be ejected in the normal way; for example, the po wer is shut off inadvertently or the loading mechanism fails. This technique should be used only as a last resort.
Troubleshooting 17 T roubleshooting If CDR400At is not performing as expected, look up the symptoms in the follo wing table, and take the appropriate correcti ve action. Symptoms Corrective action The power to the CDR400At is of f • Check the DC power cable connection.
Appendix 18 Specifications Specifications are subject to change without prior notice. Interface SCSI 2 Data Capacity 650MB (74 minutes) 550MB (63 minutes) Record/Read Speed Writing: Normal speed, 2X.
Appendix 19 Fr ont P anel Indicator Key ● on: green ✦ f lashing: green — off ❍ on: orange ✧ f lashing: orange Status ON/DISC Read/Write Reset ❍ ➠ — ❍ ➠ — Ready (no disc) ❍ — .
English: If you hav e any questions, please contact your dealer or one of the following companies. French: Pour plus de détails sur les produits, veuillez v ous adresser à Y amaha ou au distributeur.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Yamaha CDR400At è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Yamaha CDR400At - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Yamaha CDR400At imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Yamaha CDR400At ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Yamaha CDR400At, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Yamaha CDR400At.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Yamaha CDR400At. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Yamaha CDR400At insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
