Manuale d’uso / di manutenzione del prodotto CDC-98 del fabbricante Yamaha
Vai alla pagina of 16
IMPORTANT! Please record the serial number of this unit in the space below. Model: Serial No.: The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
2 SAFETY INSTR UCTIONS 1 Read Instructions – All the safety and operating instructions should be read before the unit is operated. 2 Retain Instructions – The safety and operating instructions should be retained for future reference. 3 Heed Warnings – All warnings on the unit and in the operating instructions should be adhered to.
3 As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personel only. To avoid electrical shock, do not open the unit. Refer servicing to qualified personnel only.
4 CONNECTIONS ● Before making any connections, switch OFF the power to the unit and the amplifier or other component. ● Connect the “LINE OUT” terminals to the “CD” (or “AUX”) terminals of the amplifier. If the amplifier does not have such terminals, use the “TAPE PB” terminals.
5 IDENTIFICA TION OF COMPONENTS FRONT P ANEL REMO TE CONTROL TRANSMITTER The control functions on the main unit and on the remote control transmitter are virtually identical, with the exceptions described below. POWER Display panel Remote control sensor POWER switch (p.
6 LO ADING DISCS/DISC PLA Y 1 2 3 4 5 Select the disc play mode (DISC MODE: SINGLE or ALL) while watching the display. “SINGLE” mode: The unit will play a designated disc only. “ALL” mode: The unit will play all discs in the tray in sequence. 6 * If necessary, select a desired disc by using a DISC -select button or the DISC SKIP buttons.
7 DIRECT PLA Y Select a desired track by using the numeric buttons on the remote control transmitter. Example: To select track 25 Press ➀ twice, then immediately press ➁ once. * If a track number higher than the highest track number on the disc is selected, the last track on the disc will be played.
8 T o ad vance or re verse pla y rapidly (MANU AL SEARCH) T o advance rapidl y T o reverse rapidl y ● The sound can be heard (although slightly garbled) during manual search in either direction. This is convenient for locating a precise position within a track, or for reviewing the contents quickly.
9 Note The remaining time ➁ will not be displayed for track number 21 or higher. Selecting time displays You can select any of the four time displays by pressing the TIME display mode-select button.
10 1 2 3 Select whether to mix up tracks from one disc or all discs in the tray. * If the “SINGLE” disc play mode is selected, next select a desired disc by using the DISC SKIP buttons or a DISC - select button.
11 3 ➀ Shows the program number for the track to be set next. ➁ Shows the selected disc and track number. ➂ Shows the total time of the tracks currently programmed, if tracks are selected from one disc only. ➃ Shows only the numbers of programmed tracks.
12 Notes ● You can set as many as 20 programs at one time. ● If you choose to perform programming with the DISC 1 tray empty, be sure to press a DISC SKIP button before starting programming. ● The total time of the programed tracks will not be displayed, if tracks are selected from more than one disc.
13 1 Select a track which has index numbers. 2 3 Select the desired index number. T o cancel the index searc h function Press the INDEX button. Notes ● Not all discs have index numbers.
14 1 Select the disc. 2 Load a tape on the tape deck. * To record from the beginning of the tape, rewind the tape to the full end of the supply reel. 3 This unit enters into the pause mode, and the tape deck enters into the REC/PAUSE mode. * In this mode, the time display on this unit flashes on and off.
NO TES ABOUT HANDLING COMP A CT DISCS 15 NO TES ABOUT THE REMO TE CONTROL TRANSMITTER ● This compact-disc player is designed only for playing of compact discs bearing the mark. Never attempt to load any other type of disc into the unit. The unit will also play 3-inch (8-cm) compact discs.
AUDIO SECTION Frequency response ........................ 2 Hz – 20 kHz, ±0.5 dB De-emphasis equalization ........................................ ±0.5 dB Harmonic distortion+noise ........................... 0.003% (1 kHz) S/N ratio .............
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Yamaha CDC-98 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Yamaha CDC-98 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Yamaha CDC-98 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Yamaha CDC-98 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Yamaha CDC-98, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Yamaha CDC-98.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Yamaha CDC-98. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Yamaha CDC-98 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
