Manuale d’uso / di manutenzione del prodotto J del fabbricante Varimixer
Vai alla pagina of 36
SPARE PART AND OPERATION MANUAL FOOD MIXER Model W20 A, J, F 1993 to Present January 2008 Form 103.
Caution -READ BEFORE OPERATING- Caution Varimixer recommends that mixer operators be at least 18 years of age and be thoroughly trained on the use of the mixer. Varimixer recommends that the following precautions be adopted to help make the mixer operation safer and more efficient.
Varimixer warrants its commercial mixers to the original purchaser against defects in material or manufacture for a period of one year from the date of original purchase, subject to the following exclusions and limitations. The warranties provided by Varimixer do not apply in the following instances: 1.
TABLE OF CONTENTS Installation Instructions...................................................................................................2 Cleaning Instructions .....................................................................................
INSTALLATION - CLEANING - MAINTENANCE INSTALLATION : The mixer can be placed directly on the floor. Foundation bolts in the floor are necessary only under special conditions, e.g. in ships. If the 20-quart mixer is placed on a bench stand, it must be fastened with the bolts that fasten the unit to the shipping pallet.
3 Varimixer Operating Instructions W20 OVERLOADING: Do not overload the mixer. Tough and heavy doughs might reduce the working capacity of the mixer by 75%. The capacity will be further reduced if the speed of the tool is increased beyond what is recommended, or if a wrong tool is used.
4 Dimesion Data Level Capacity of large bowl Qt. 21 Level Capacity of small bowl Qt. 13 Width Overall In. 17 7/8 Depth Overall In. 26 1/2 Height Overall In 34 7/8 Electrical Data for Motor** 60HZ / 1 Phase Voltage* V 115 Feed Wires incl. Ground No. 3 Motor Power HP 1 Amperes,full load A 12 Mixing Speed Agitator Speed Min.
5 SERVICE INSTRUCTIONS 5 55 3 21 4 40 41 9 7 22 1 10 6 8 42 43 2 16 17 18 20 19 44.
(1) Remove the top cover of the mixer (1) and the plastic cover (43) by removing the 2 screws (3) The attachment engagement hub is taken out by removing the plastic cover (4) and the 4 bolts (5). (6) The control box is taken off by removing the 2 screws (55).
The planetary head is removed in the following way: a) The top cover of the mixer (1), the attachment engagement hub (3), the special V-belt (7), and the control box (6) are removed.
Mounting of the planetary head should be done in reverse order. When the lower fork (15) and the spring (34) are mounted, the speed selector lever (8) is turned counter clockwise, so that it points hori - zontally backward, at the same time as the lower fork is pressed down gently.
9 (45) The bowl arms are to be replaced in the following way: a) Disconnect the mixer on the main switch or disconnect the connecting cable. b) Lower the bowl arms. c) Place the mixer on its back and remove the legs of the mixer (17) by removing the screws (18).
10.
11 Body 2 1 3 5 6 4 7 8 9 10 11 12 13 14 15 16 19 17 21 20 18.
Body 12 Figure Number Description Part Number 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. Screw Top Lid (Painted) Rear Access Plate Bushing (Lift Handle) Upper Column Pl.
Bowl Arms 1 3 4 5 8 9 6 7 12 11 10 14 16 15 2 13 20N-65.1M 20N-62Z 20N-65.1Z 17 18 19 56RN20-15 20 22 21.
14 Bowl Arms Figure Number Description Part Number Ball (Black) Bowl Lift Lever Washer Disc Retaining Disc Crank Arm Cotter Pin Key Snap Ring Lift Nut Jam Nut Lift Bolt Bowl Arm Shaft Snap Ring 25U Bo.
15 Pulley System 8 9 16 13 14 12 7 10 3 4 35 2 6 18 12 20 21 1 28 26 23 32 30 27 25 27 31 24 29 27 37 36 38 34 40 33 32 5.
16 Pulley System Figure Number Description Part Number Belt Grease Nipple Bolt M6x16 Motor Mount Plate Bolt 3/8-16 X 3/4 Washer Motor Pulley Pin Grease Nipple Snap Ring Set Screw ------------ Bushing .
Pulley System Model W20P Single Speed Pizza Mixer 3 4 1 2 5 6 7 8.
Pulley System Model W20P Single Speed Pizza Mixer Figure Number Description Part Number Belt Motor Pulley Planetary Pulley Bolt 3/8-16X3/4 Washer Bolt M6X16 Washer Motor 20P-91 6J19 6J60 STA 5442 STA 6009 STA 5432 STA 6008 20D-85.64 1. 2. 3. 4. 5. 6. 7.
17 Planetary Head 31 33 34 35 27 28 29 30 25 26 14 15 16 17 18 19 12 20 21 22 23 10 9 4 6 7 8 1 2 3 20N-2.1Z 20N-3 20N-2 20N-2.1Z 20N-30 20-33 20-36 20N-101 5 11 24 32 13.
Planetary Head 18 Figure Number Description Part Number Snap Ring Bearing 6206 Snap Ring Bolt M6X16 Main Bearing Head Snap Ring Bearing 6206 Distance Piece Gear Wheel Rim Bolt M8X30 Main Shaft Snap Ri.
19 Attachment Drive 11 3 12 14 13 7 6 4 5 9 10 8 20N-10.6M 1 2 20N-10.6M #12 Hub 20N-10.5M #17 Hub 2” I.D. 1 1/2” I.D. 15.
20 Attachment Drive Figure Number Description Part Number Snap Ring Wormwheel Snap Ring Bearing Distance Piece Bearing Key Shaft F/ #17 Hub Shaft F/ #12 Hub O-ring Hub F/ #17 ( 2” I.
21 Electrical Components 1993-mid 1997 3 3A 2 1 4 5 6 10 8 7 12 11 17 15 14 16 9.
22 Electrical Components 1993-mid 1997 Figure Number Description Part Number Front Panel No Hub Front Panel w/Hub Front Foil No Hub Front Foil w/ Hub Stop Button Complete Start Button Complete Timer A.
14 13 1 11 15 10 3 4 6 7 8 9 2 5 16 18 19 17 12 6A 23 Electrical Components 1998-Present.
24 Electrical Components 1998-Present Figure Number Description Part Number Start Switch Assembly Stop Switch Assembly Timer Assembly 115V Timer Knob Timer Scale Front Panel Assembly No Hub Front Pane.
25 Bowl Screen 1 13 5 6 12 2 3 4 7 8 9 10 11 17 16 18 14 15.
Bowl Screen 26 Figure Number Description Part Number Bowl Screen Kit Bushing Cam Set Screw Screw Microswitch Set Screw Cam Spacer Bolt Nut Bushing Bracket Assembly Nut Bolt Rear Screen Front Screen Chute 225/20N 56SN20-21.1 56SN20-21 STA 5664 STA 5251 56SN20-30 STA 5664 56SN20-22.
27 Tools and Attachments 1, 2 19 19 19 4, 5 6, 7 8 12, 13 21, 21A 22, 22A 27 23, 23A 19 25 26 24 ,3 19 19 16 20.
28 Tools and Attachments Figure Number Description Part Number S/S Bowl 20Qt S/S Bowl 12Qt. S/S Bowl 25Qt. S/S Hook 20Qt. S/S Hook 12Qt. Flat Beater 20Qt. Flat Beater 12Qt. S/S Flat Beater 20 Qt. Wire Whip 20 Qt. Wire Whip 12 Qt. S/S Wing Whip 20 Qt. Pin Rack Bowl Scraper 20 Qt.
29.
30.
5489 Campus Drive Shreveport LA 71129 (800) 222-1138 (318) 635-3131 Fax www.varimixer.com.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Varimixer J è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Varimixer J - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Varimixer J imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Varimixer J ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Varimixer J, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Varimixer J.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Varimixer J. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Varimixer J insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
