Manuale d’uso / di manutenzione del prodotto VSP-3000 del fabbricante Sanyo
Vai alla pagina of 34
INSTR UCTION MANU AL System Controller VSP-3000 About this manual • Before installing and using this unit, please read this man ual carefully . Be sure to keep it handy f or later reference .
Introduction 1 Introduction Precautions ........................................................ 2 Safety Cautions ................................................. 3 Main features ..................................................... 7 Accessories ..
Introduction 2 Precautions For UL Users CA UTION RISK OF ELECTRIC SHOCK DO NO T OPEN CA UTION: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NO T REMO VE CO VER (OR BACK). NO USER-SER VICEABLE P ARTS INSIDE. REFER SER VICING TO QU ALIFIED SERVICE PERSONNEL.
Introduction 3 W ARNING Never use when unit emits smoke, unusual noises, or un usual smells. Using under these abnormal conditions can cause fires and electric shock. Immediately unplug the AC adapter po wer plug from the outlet, confirm that the smoke stops, and then request repairs from the installer or the purchasing source.
Introduction 4 CA UTION T ranspor t with care Unplug the AC adapter po wer plug from the outlet, confirm that connection cables are disconnected, and transport carefully to avoid dropping the unit or subjecting it to sev ere shoc k. Cautions for care or long-term disuse Unplug the AC adapter po wer plug from the outlet.
Introduction 5 Pro vided A C Adapter W ARNING Use only the pr ovided A C adapter Use the provided A C adapter . Using a different AC adapter can cause fires or electric shoc k, due to differences in po wer cord current capacity . Never touch the A C adapter with wet hands This can cause electric shock.
Introduction 6 Safety Cautions CA UTION Do not connect to other equipment The provided A C adapter and pow er cable are exclusiv ely f or use with this unit. Connecting to other equipment can cause fires or electric shock. P ower cor d Damaging the power cord in the f ollo wing manner can cause fires or electric shock.
Introduction 7 Main features Accessories Y ou can use the joystic k to carry out pan, tilt and zoom operations f or the camera. RS-485 communication cab le can be connected. P assw ord setting is a vailab le. T rademark Brands and product names described in this document are trademarks or registered trademarks of their respective companies .
Preparations 8 ① ④ ⑥ ⑤ ⑧⑨ ② ③ PWR Tx Rx ⑩ ⑦ D VR: Digital video recorder ① Escape/P ower button (ESC/PWR) ESC: This is used to exit from the current oper ating menu and return to the initial screen.
Preparations 9 ① ② ③ ④ ⑤ ① P ower terminal (DC 12 V) Connect the accessory AC adapter to the DC terminal. ② USB mouse port (USB) Connect the accessory USB cable to this por t if using a D VR with a mouse function.
Preparations 10 Connecting to a Sany o camera (Operation: P20) Monitor (sold separately) AC adapter (accessory) 485A 485B SIDE-A Dome camera (sold separately) TRx (+) : A TRx (–) : B A B T x 1 T x 2 T x 3 T R x System controller ■ Connection method 01GB_L8CSE_WA_VSP3000.
Preparations 11 Connecting to a Sany o D VR (Operation: P28) Set the protocol to “SSP” f or all of the cameras being connected. (Protocol setting: P21) A RS-485 B DO NOT CONNECT TO PHONE LINE 1 IN.
Preparations 12 Connection method Connecting to a Sany o D VR with a mouse function (Operation: P29) T Camera (sold separately) Camera (sold separately) Video input terminal D VR with mouse function (.
Preparations 13 Main menu steps Press the SUB MENU/MAIN MENU button. The MAIN MENU screen appears in the menu displa y and y ou are prompted to enter the pass word. No passw ord is set initially , so simply press the ENT button. “1.VER: X.XX” will then be displa yed.
Preparations 14 Menu settings 1 Language setting The only av ailable language f or menus is English. No setting is neccessary . When “ENGLISH” is displayed, press the ENT button or the ESC/PWR b utton to return to the MAIN MENU screen. [ ó ñ MAIN MENU ] 3.
Preparations 15 3 Control ID setting If using more than one system controller , change the addresses for each of them. The addresses can be assigned to a number within the range of 0 to 4. (Default setting: 0) 1 Move the jo ystic k up or down to select “5.
Preparations 16 Menu settings 5 Sleep setting Y ou can set the system controller to tur n off automatically if it is not operated f or a cer tain period of time. When this is done, a mo ving “SLEEP MODE” display will appear in the men u display . (Default setting: OFF) 1 Move the jo ystic k up or down to select “7.
Preparations 17 7 Backlight setting This sets the brightness of the system controller’ s menu displa y screen. (Default setting: OFF) 1 Move the jo ystic k up or down to select “9. BA CKLIGHT”. [ ó ñ MAIN MENU †] 9.BACKLIGHT:OFF 2 Move the jo ystic k to the left or right to set the backlight (Example: A UT O).
Preparations 18 Menu settings 9 D VR link setting The camera images from the D VR which is connected to the system controller switch in line with the camera selection. (Default setting: ON) 1 Move the jo ystic k up or down to select “11. D VR LINK”.
Preparations 19 11 Default setting This returns all settings to the default settings that were in place at the time of shipment from the factory . 1 Move the jo ystic k up or down to select “13. F ACT OR Y SET”, and then move the jo ystic k to the right.
Preparations 20 Camera setup steps While pressing the SHIFT/FUNC. b utton, press the SUB MENU/MAIN MENU button. “CAM SETUP001” will be displa yed in the men u display and y ou will be prompted to enter the pass word. [ CAM SETUP001 ] PASSWORD[ ---- ] [ CAM SETUP001 ] OK [ ñ CAM SETUP001†] 1.
Preparations 21 1 Address setting This selects the camera address. All settings other than this one will be applied to the selected address. (Default setting: 001) 1 Move the jo ystic k up or down to select “1.
Preparations 22 Camera settings 3 Baud rate setting This sets the communication speed. (Default setting: 19.2 Kbps) 1 Move the jo ystic k up or down to select “3. BA UDRA TE”. [ ó ñ CAM SETUP001 ◆ ] 3.BAUDRATE:19.2k 2 Move the jo ystic k to the left or right to select the communication speed.
Preparations 23 5 D VR address and c hannel setting This assigns the D VR address and channel number to the selected camera. For details , ref er to “Camera address number s (default value)” . See page 31. 1 Move the jo ystic k up or down to select “6.
Operation 24 Camera operation buttons Joystic k: When in camera mode and a camera menu is not being displa yed, this can be used to carry out pan, tilt and zoom operations. A UT O P AN ST ART : (P27) When this button is pressed, automatic panning is carried out between the preset panning positions.
Operation 25 FOCUS NEAR: Adjusts the focus to the nearest object. FOCUS F AR: Adjusts the focus to the furthest object. GO PRESET P: The camera will mov e to the preset position which has been recorded. For details , ref er to “Preset position retriev al operation” .
Operation 26 Camera operations A uxiliary function operation T ransmits A UX ON/OFF commands to the selected cameras. F or details, ref er to “List of auxiliary commands for San y o cameras” . (P30) 1 Press the A UX b utton. “A UX ON” will be displa yed.
Operation 27 Retrieving pan, sequence and tour operations recorded in a PTZ camera Y ou can select preset pan, sequence and tour operations so that these operations can be carried out. This operation is limited to the f ollowing camera models which already contain preset operations.
Operation 28 Switching the D VR screen display The only D VR function that can be operated from the system controller is the screen displa y s witching function. The monitor screen can be s witched between multi-screen, quad-screen or single-screen displa y by pressing the f ollo wing buttons .
Operation 29 1 Press the mouse ( ) button. “MOUSE MODE” will be display ed, and y ou can then use the joystic k to mov e the cursor . Camera operations cannot be carried out at this time. SANYO SSP 19.2k MOUSE MODE L button: Left clic k R button: Right clic k 2 Press the mouse button once more.
Others 30 List of auxiliary commands for San y o cameras The commands are e xamples of commands f or the VCC-9500/9600/9700/9800 series. Auxiliary command ON OFF Operation 1 Switch to Color Mode P an/Tilt control 1 Switches a day/night camer a to color mode.
Others 31 Camera address number s (default v alue) Camera address Connected D VR Connected channel No . CAM No . D VR CH CAM No . D VR CH CAM No . D VR CH CAM No .
Others 32 Communication f ormat RS485, RS-422 Keyboar d 29 k eys Joystic k 3-axis jo ystick (pan / tilt / z oom) Control comm unication terminal Tx1, Tx2, Tx3, TRx Protocol SSP , H-SSP , P elco-D USB mouse port Compatible with D VRs with mouse function Communication speed 2400, 4800, 9600, 19200, 38400, 57600 bps Max.
SANY O Electric Co., Ltd. 01GB_L8CSE_WA_VSP3000.indd 33 01GB_L8CSE_WA_VSP3000.indd 33 2008/02/29 13:17:10 2008/02/29 13:17:10.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Sanyo VSP-3000 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Sanyo VSP-3000 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Sanyo VSP-3000 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Sanyo VSP-3000 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Sanyo VSP-3000, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Sanyo VSP-3000.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Sanyo VSP-3000. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Sanyo VSP-3000 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
