Manuale d’uso / di manutenzione del prodotto V300-PRO del fabbricante Lincoln Electric
Vai alla pagina of 40
INVER TEC V300-PRO OPERA TOR’S MANUAL For use with machines Code 10256 and 10257. IM526-B December,1999 Safety Depends on You Lincoln arc welding and cutting equipment is designed and built with safety in mind. However, your overall safety can be increased by proper installation .
– 2 – PROTECT YOURSELF AND OTHERS FROM POSSIBLE SERIOUS INJURY OR DEATH. KEEP CHILDREN AWAY. PACEMAKER WEARERS SHOULD CONSULT WITH THEIR DOCTOR BEFORE OPERATING.
– 3 – FOR ENGINE powered equipment. 7.a. Turn the engine off before troubleshooting and maintenance work unless the maintenance work requires it to be running. --------------------------------------------------------------------------------------- 7.
– 4 – PRÉCA UTIONS DE SÛRETÉ Pour votre propre protection lire et observer toutes les instructions et les précautions de sûreté specifiques qui parraissent dans ce manuel aussi bien que les précautions de sûreté générales suiv- antes: Sûreté Pour Soudage A L’Arc 1.
– 5 – T ABLE OF CONTENTS P age Safety Precautions .............................................................................................................2-4 Introductory Information ...........................................................
– 6 – Thank You for selecting a QUALITY product by Lincoln Electric. We want you to take pride in operating this Lincoln Electric Company product ••• as much pride as we have in bringing this product to you! Read this Operators Manual completely before attempting to use this equipment.
PRODUCT DESCRIPTION The Invertec V300-PRO is a 300 amp arc welding power source that utilizes single or three phase input power to produce either constant voltage or constant current outputs. The V300-PRO is designed for 60 Hz supply systems. The welding response of the Invertec has been optimized for GMAW, SMAW, TIG and FCAW processes.
– – 8 – INPUT VOLTAGE SETUP POWER CORD CONNECTION A 10 ft. (3.0m) power cord is provided and wired into the machine. Follow the power cord connection instructions. Incorrect connection may result in equip- ment damage. Single Phase Input 1. Connect green lead to ground per U.
– 9 – – 9 – remote control adapter and K857 remote control are required for remote output control). 5. Set the meter polarity switch on the rear of the Invertec to coincide with wire feeder polarity used. The wire feeder will now display the welding volt- age.
LN-9 GMA Connection Instructions 1. Turn the Invertec power switch “off”. 2. Connect the K596 control cable assembly from the LN-9 GMA to the Invertec control cable connector. The control cable connector is located at the rear of the Invertec. 3. Connect the electrode cable to the output terminal of polarity required by electrode.
– 11 – OPERA TING INSTR UCTIONS DUTY CYCLE The Invertec is rated at 300 amps, 60% duty cycle for 3 phase inputs (based on a 10 minute cycle). It is also rated at 250 amps, 100% duty cycle. CONTROL FUNCTION / OPERATION Power Switch - Place the lever in the “ON” position to energize the machine.
– CV FCAW This setting has been optimized for Innershield ® and Outershield ® flux-cored electrodes. CV GMAW Short circuit, glob and spray transfer solid wire and gas welding are done in this mode. Low end procedures, less than 17V, may operate better in the FCAW mode.
– 13 – Meter Polarity Switch The wire feeder polarity switch is located at the rear of the machine. The switch provides a work connection for wire feeder voltmeters. Place the switch in the position of the electrode polarity indicated by the decal.
– 14 – PERIODIC MAINTENANCE Overload Protection The machine is electrically protected from producing high output currents. Should the output current exceed 340-360A, an electronic protection circuit will reduce the current to approximately 150A. The machine will continue to produce this low current until the protection circuit is reset.
– 15 – TROUBLESHOO TING GUIDE Trouble What To Do Not output but fan operates and meter is on. Poor welding, weld settings drift, or output power is low. Main fuses open or Switch PC boards overheated. Output turns on momentarily then switches off and repeats.
– – 16 – TEST PROCEDURES Step 1A 1B 2 3A 3B Next Test Step 1B 2 3A 3B 4 and 5 Test Output pilot circuit (set S4 on) Protection PC board output (set S4 on) Static capacitor balance (set S4 off) 3.
– 17 – Step 4 Next Test Step cont 5 cont 5 cont 5 cont 5 cont 5 cont 5 cont 5 cont 5 cont 5 cont 5 cont 5 cont 5 Test Switch PC Board resistance test.
– 18 – Step 5 6 Next Test Step cont cont cont cont Test Snubber Resistors Disconnect leads 401, 402, 403 and 404 from Switch PC Board Output diodes Remove output load Repair Action Replace R4 Repl.
Repair Action Replace D13, inspect S1, test C1 and C2 Replace D13, inspect S1, test C1 and C2 Replace D13, inspect S1, test C1 and C2 Replace D13, inspect S1, test C1 and C2 Replace D13, inspect S1, t.
– Matched Parts Certain parts must be replaced in matched sets. Matched sets are required in the following areas: Output diodes: D1, D2, D3, D4 and D5 Output diodes: D7, D8, D9, D10 and D11 Capacito.
– 21 – Replacement of Power Modules and Output Diodes Input rectifier, D13, is a power module. When mount- ing power modules, the heat sink and module mount- ing surface should be clean and free of burrs and for- eign material. Apply heatsink compound (Dow 340) as a uniform layer ideally .
– 22 – TURN THE POWER SWITCH OF THE WELDING POWER SOURCE "OFF" BEFORE INSTALLING PLUGS ON CABLES OR WHEN CONNECTING OR DISCONNECTING PLUGS TO WELDING POWER SOURCE.
– 23 – INSTALLATION INSTRUCTIONS THIS CONNECTOR IS MEANT TO BE USED WITH LINCOLN POWER SOURCES WHICH HAVE A 14-PIN TO ANY OF THE 14 CIRCUITS PRESENT IN THE WIRE FEEDER RECEPTACLE.
– 24 – N.A. WELDING CABLE MUST BE SIZED FOR CURRENT AND DUTY CYCLE OF APPLICATION. N.B. DIAGRAM SHOWS ELECTRODE POSITIVE. TO CHANGE POLARITY, TURN POWER "OFF", REVERSE ELECTRODE AND WORK CABLE AT POWER SOURCE. N.C. INSULATE EACH UNUSED LEAD INDIVIDUALLY.
– 25 – N.A. WELDING CABLE MUST BE SIZED FOR CURRENT AND DUTY CYCLE OF APPLICATION. N.B. DIAGRAM SHOWS ELECTRODE POSITIVE. TO CHANGE POLARITY, TURN POWER "OFF", REVERSE ELECTRODE AND WORK CABLE AT POWER SOURCE. N.C. INSULATE EACH UNUSED LEAD INDIVIDUALLY.
– 26 – N.A. WELDING CABLE MUST BE SIZED FOR CURRENT AND DUTY CYCLE OF APPLICATION. N.B. DIAGRAM SHOWS ELECTRODE POSITIVE. TO CHANGE POLARITY, TURN POWER "OFF", REVERSE ELECTRODE AND WORK CABLE AT POWER SOURCE. N.C. INSULATE EACH UNUSED LEAD INDIVIDUALLY.
– 27 – Only qualified persons should install, use or service this machine. using the disconnect switch at the fuse box WARNING Turn off input power to the Welding Power Source Before connecting the wire feeder. ELECTRIC SHOCK CAN KILL N.A. WELDING CABLE MUST BE SIZED FOR CURRENT AND DUTY CYCLE OF APPLICATION.
– 28 – Only qualified persons should install, use or service this machine. using the disconnect switch at the fuse box WARNING Turn off input power to the Welding Power Source Before connecting the wire feeder. ELECTRIC SHOCK CAN KILL N.A. WELDING CABLE MUST BE SIZED FOR CURRENT AND DUTY CYCLE OF APPLICATION.
– 29 – TO WORK + POWER SOURCE INVERTEC DC TIG STARTER - WARNING ELECTRIC SHOCK CAN KILL Only qualified persons should install, use or service this machine.
– 30 – Only qualified persons should install, use or service this machine. using the disconnect switch at the fuse box WARNING Turn off input power to the Welding Power Source Before connecting the wire feeder. ELECTRIC SHOCK CAN KILL N.A. WELDING CABLE MUST BE SIZED FOR CURRENT AND DUTY CYCLE OF APPLICATION.
– 31 – N.C. INSULATE EACH UNUSED LEAD INDIVIDUALLY. TO WORK - + 14 PIN AMPHENOL SPARE 82 81 42 41 31 32 2 4 21 GND 75 76 77 31 32 2 4 21 GND N.C. K867 UNIVERSAL ADAPTER PLUG N.D. N.D. SPLICE LEADS AND INSULATE. Only qualified persons should install, use or service this machine.
– 32 – CONTROL CONTROL PANEL ARC FORCE/INDUCTANCE 2 2W R11 227 /INDUCTANCE CONTROL TERMINAL CHOKE 10K 215 227 4 303 301 CW (MAX) METER TOP S2 C5 L3 R8 D2 SHUNT 1 211A 3 8 1 BOARD 9 CONNECTOR CAVITY NUMBERING SEQUENCE OUTPUT TERMINAL S4 R = RED 2 4 3 J2 J1 1 301 4 TP4 4 5 W L4 9D 12B 12D 9C 1 5 R5 R12 275C 204B 6 5 206 3 215 A V LAYOUT N.
– 33 – 2 1 2 RECTIFIER 9D C2 R7 9A 9A N.F. CONTROL PANEL J11, J14 S F 9 H5 402, 404 ON OFF H1 R V C H6 12B BOTTOM 51 WIRING DIAGRAM V300-PRO CODE 10257 (575V) SHUNT R8 250 L3 L1 C1 TP2 9D S1 1, 8 .
INVERTEC V300-PRO & V300-I NO TES.
INVERTEC V300-PRO & V300-I NO TES.
INVERTEC V300-PRO & V300-I NO TES.
Now A vailab le...12th Edition The Procedure Handbook of Ar c W elding With over 500,000 copies of previous editions published since 1933, the Procedure Handbook is considered by many to be the “Bible” of the arc welding industry. This printing will go fast so don’t delay.
– 38 – W ARNING A VISO DE PRECA UCION A TTENTION W ARNUNG A TENÇÃO Spanish French German Portuguese Japanese Chinese Korean Arabic READ AND UNDERST AND THE MANUF ACTURER’S INSTRUCTION FOR THIS EQUIPMENT AND THE CONSUMABLES TO BE USED AND FOLLOW YOUR EMPLOYER’S SAFETY PRACTICES.
– 39 – W ARNING A VISO DE PRECA UCION A TTENTION W ARNUNG A TENÇÃO Spanish French German Portuguese Japanese Chinese Korean Arabic LEIA E COMPREENDA AS INSTRUÇÕES DO F ABRICANTE PARA ESTE EQUIP AMENTO E AS P AR TES DE USO, E SIGA AS PRÁTICAS DE SEGURANÇA DO EMPREGADOR.
– • Sales and Service through Subsidiaries and Distributors Worldwide • Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Lincoln Electric V300-PRO è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Lincoln Electric V300-PRO - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Lincoln Electric V300-PRO imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Lincoln Electric V300-PRO ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Lincoln Electric V300-PRO, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Lincoln Electric V300-PRO.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Lincoln Electric V300-PRO. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Lincoln Electric V300-PRO insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
