Manuale d’uso / di manutenzione del prodotto CWL-6200 del fabbricante LG Electronics
Vai alla pagina of 15
CopyWriter Live CWL-6200 Audio Disc Recorder Instruction Manual Microboards Technology LLC 8150 Mallory Court Chanhassen, MN 55317 Version 2.3 www.microboards.
Microboards CopyWriter Live 2.
Microboards CopyWriter Live 3 Table of Contents Introduction ....................................................................................................................... 5 What’s Included: .................................................
Microboards CopyWriter Live 4 Important Safety Instructions • Read the User’s Manual completely • Observe all warnings • Do not connect or disconnect the power cord when your hands are wet • Keep unit and power cord aware from a ny heat source, such as radiators, stoves, or heat registers.
Microboards CopyWriter Live 5 Introduction The CopyWriter Live combines the flexibility of cassette tapes with the quality and longevity of CDs, in one low-cost, easy to use unit. You can record from practically any au dio source, including live feed fro m a microphone, a cassette deck, a mixer and many ot hers.
Microboards CopyWriter Live 6 Controls 1) Left CD Recorder Drive 2) Eject for Left CD Recorder Drive 3) Right CD Recorder Drive 4) Eject for Right CD Recorder drive 5) Power Button 6) Disc Change Butt.
Microboards CopyWriter Live 7 Connections Important Note : Make sure the power is turned off to the CopyWriter Live system when connecting or disconnecting any cables. Back Panel: XLR, RCA Out put, RCA Input 1, and Power Input connections can be made to the XLR c onnection on the back, or to the RCA Input 1 connection.
Microboards CopyWriter Live 8 Rack Mount Installation To mount the rack mount brackets on your CopyW riter Live system, please follow these steps: 1) If you system is turned on, turn off power a nd unplug the power cord from the back of the system. 2) Turn the system over and remove the four f eet from the bottom of the CopyWriter Live.
Microboards CopyWriter Live 9 If your audio source volume is too low, the m eter may show little or no activity. In that case, you should increase your input volume by pressing the Vol Up button.
Microboards CopyWriter Live 10 Copying a Disc To copy a disc, all you need to do is place a blank disc in one drive and the master disc in the other drive. It does not matter which drive contains the master and whic h drive contains the blank. Press the Disc Copy button on the CopyWriter Live front panel and the copy pro cess will begin.
Microboards CopyWriter Live 11 In order for a recorded disc to play back correctly in other players, the disc must be closed. If you press Stop to stop your recoding, then the disc is cl osed and can be played on other playback devices. If you press Pause while recording a disc, r ecording will stop , but the disc is not closed.
Microboards CopyWriter Live 12 Track Extraction This menu option allows you to extract tracks from one master and burn them to a blank disc. To use this feature, follow the direction s below: 1. Press Yes/Setup at the Track Extraction menu selection in the Setup m enu to begin.
Microboards CopyWriter Live 13 In the Setup menu, press the No button until System Update is sele cted. Press the Yes/Setup button and the left drive will eject, prompting you to place the firmware disc in the drive with the m essage Insert Program Disc .
Microboards CopyWriter Live 14 Troubleshooting Playback is not appearing on the screen. Confirm the RCA connections are correct. No Audio playback Confirm the RCA connections are correct. Check the playback volume and make sure it is not too low. Disc will not play back on other player Confirm the recorded disc is Closed.
Microboards CopyWriter Live 15 Contact Information For technical questions or support issues, c ontact Microboards Technol ogy technical support: United St ates PH: 952-556-1639 FAX: 952-556-1628 support@microbo ards.com www.microboard s.com Europe PH: +44 (0) 845 230 7800 www.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il LG Electronics CWL-6200 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del LG Electronics CWL-6200 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso LG Electronics CWL-6200 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul LG Electronics CWL-6200 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il LG Electronics CWL-6200, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del LG Electronics CWL-6200.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il LG Electronics CWL-6200. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo LG Electronics CWL-6200 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
