Manuale d’uso / di manutenzione del prodotto MA372IEN del fabbricante JVC
Vai alla pagina of 156
1– EN ENGLISH ESPAÑOL INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
2 – EN INSTRUCTIONS Sound adjustments Indication (For) BAS (bass) MID (mid-range) TRE (treble) LOUD (loudness) USER (Flat sound) 00 00 00 OFF ROCK (Rock or disco music) +03 00 +02 OFF CLASSIC (Class.
3 – EN WARNINGS To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and make all electrical connections before installing the unit. • Be sure to ground this unit to the car’s chassis again after installation.
4 – EN INSTALLATION / CONNECTION When using the optional stay Install the unit at an angle of less than 30˚. Screw (option) Stay (option) Fire wall Dashboard * Not supplied for this unit.
1 ENGLISH ESPAÑOL IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and/or invisible class 1M laser radiation when open.
2 INSTRUCTIONS Sound adjustments Indication (For) BAS (bass) MID (mid-range) TRE (treble) LOUD (loudness) USER (Flat sound) 00 00 00 OFF ROCK (Rock or disco music) +03 00 +02 OFF CLASSIC (Classical mu.
3 WARNINGS To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and make all electrical connections before installing the unit. • Be sure to ground this unit to the car’s chassis again after installation. Notes: • Replace the fuse with one of the specified rating.
4 INSTALLATION / CONNECTION When using the optional stay Install the unit at an angle of less than 30˚. Screw (option) Stay (option) Fire wall Dashboard * Not supplied for this unit.
ENGLISH For canceling the display demonstration, see page 6. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0486-001A [U/UH] KD-G396/KD-G395/KD-G245 CD RECEIVER KD-G396/KD-G395/KD-G245 Cover_KD-G396[U_UH]f.indd 1 Cover_KD-G396[U_UH]f.
2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
ENGLISH 3 How to use the M MODE button If you press M MODE, the unit goes into functions mode, then the number buttons and 5 / ∞ buttons will work as different function buttons.
4 ENGLISH ; RND (random) button a AUX (auxiliary) input jack s KD-G396/KD-G395: Disc information indicators— TAG (Tag information), (track/file), (folder) d DISC indicator f Playback mode / item ind.
ENGLISH 5 Remote controller — RM-RK50 RM-RK50 is supplied only for KD-G396/KD-G395. Installing the lithium coin battery (CR2025) Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle in between. Warning: • Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode.
6 ENGLISH Basic settings • See also “General settings — PSM” on pages 11 and 12. 1 2 1 Canceling the display demonstrations Select “DEMO,” then “DEMO OFF.” 2 Setting the clock Select “CLOCK H” (hour), then adjust the hour. Select “CLOCK M” (minute), then adjust the minute.
ENGLISH 7 Storing stations in memory You can preset six stations for each band. FM station automatic presetting — SSM (Strong-station Sequential Memory) 1 Select the FM band (FM1 – FM3) you want to store into. 2 3 “SSM” flashes, then disappears when automatic presetting is over.
8 ENGLISH To fast-forward or reverse the track To go to the next or previous track To go to the next or previous folder (for MP3/ WMA discs in KD-G396/KD-G395) To locate a particular track (for CD) or.
9 ENGLISH Other main functions Skipping tracks quickly during play • KD-G396/KD-G395: For MP3 or WMA discs, you can skip tracks within the same folder Ex.: To select track 32 while playing tracks whose number is a single digit (1 to 9) 1 2 Each time you press the button, you can skip 10 tracks.
10 ENGLISH 7 Random play Mode Plays at random FLDR RND * : All tracks of the current folder, then the tracks of the next folder and so on. [ ] ALL RND : All tracks of the current disc. [ ] RND OFF : Cancels. * KD-G396/KD-G395: Only while playing an MP3 or a WMA disc.
11 ENGLISH General settings — PSM You can change PSM (Preferred Setting Mode) items listed in the table on page 12. 1 2 Select a PSM item. 3 Adjust the PSM item selected. 4 Repeat steps 2 and 3 to adjust other PSM items if necessary. 5 Finish the procedure.
12 ENGLISH Indications Item ( : Initial) Selectable settings, [reference page] DEMO Display demonstration • DEMO ON • DEMO OFF : The display demonstration will be activated automatically if no operation is done for about 20 seconds, [6]. : Cancels.
13 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
14 ENGLISH • KD-G396/KD-G395: MP3 and WMA “tracks” (words “file” and “track” are used interchangeably) are recorded in “folders.” • KD-G396/KD-G395: While fast-forwarding or reversing on an MP3 or WMA disc, you can only hear intermittent sounds.
ENGLISH 15 • The search function works but search speed is not constant. Changing the source • If you change the source, playback also stops (without ejecting the disc). Next time you select “CD” for the playback source, disc play starts from where it has been stopped previously.
16 ENGLISH Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). FM/AM • SSM automatic presetting does not work.
ENGLISH 17 Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
© 2007 Victor Company of Japan, Limited EN, TH 0807DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Rear_KD-G396[U_UH]f.
1 KD-G396/KD-G395/KD-G245 Installation/Connection Manual °“√µ‘¥µ—Èß/§ŸË¡◊Õ°“√µ‘¥µ—Èß GET0486-006A [ U/UH ] 0807DTSMDTJEIN EN, TH ENGLISH This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems .
2 When installing the unit without using the sleeve / ‡¡◊ËÕµ‘¥µ—Èß™ÿ¥ª√–°Õ∫‚¥¬‰¡Ë„™Èª≈Õ°ÀÿÈ¡ In a Toyota car for example, first remove the car radio and install the unit in its place.
3 Typical connections / °“√‡™◊ËÕ¡µËÕ·∫∫ª°µ Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color.
4 Connecting the external amplifier (only for KD-G396/KD-G395) / °“√‡™◊ËÕ¡µËÕ‡§√◊ËÕߢ¬“¬‡’¬ß¿“¬πÕ° ( ”À√—∫ KD-G396 À√◊ Õ KD-G395 ‡∑Ë “π —Èπ ) You can connect an amplifier to upgrade your car stereo system.
ENGLISH INDONESIA CD RECEIVER KD-G396/KD-G395/KD-G245 ALA T PENERIMA CD KD-G396/KD-G395/KD-G245 For canceling the display demonstration, see page 6. Untuk membatalkan tampilan demonstr asi, lihat halaman 6. For installation and connections, refer to the separate manual.
2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
ENGLISH 3 How to use the M MODE button If you press M MODE, the unit goes into functions mode, then the number buttons and 5 / ∞ buttons will work as different function buttons.
4 ENGLISH ; RND (random) button a AUX (auxiliary) input jack s KD-G396/KD-G395: Disc information indicators— TAG (Tag information), (track/file), (folder) d DISC indicator f Playback mode / item ind.
ENGLISH 5 Remote controller — RM-RK50 RM-RK50 is supplied only for KD-G396/KD-G395. Installing the lithium coin battery (CR2025) Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle in between. Warning: • Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode.
6 ENGLISH Basic settings • See also “General settings — PSM” on pages 11 and 12. 1 2 1 Canceling the display demonstrations Select “DEMO,” then “DEMO OFF.” 2 Setting the clock Select “CLOCK H” (hour), then adjust the hour. Select “CLOCK M” (minute), then adjust the minute.
ENGLISH 7 Storing stations in memory You can preset six stations for each band. FM station automatic presetting — SSM (Strong-station Sequential Memory) 1 Select the FM band (FM1 – FM3) you want to store into. 2 3 “SSM” flashes, then disappears when automatic presetting is over.
8 ENGLISH To fast-forward or reverse the track To go to the next or previous track To go to the next or previous folder (for MP3/ WMA discs in KD-G396/KD-G395) To locate a particular track (for CD) or.
9 ENGLISH Other main functions Skipping tracks quickly during play • KD-G396/KD-G395: For MP3 or WMA discs, you can skip tracks within the same folder Ex.: To select track 32 while playing tracks whose number is a single digit (1 to 9) 1 2 Each time you press the button, you can skip 10 tracks.
10 ENGLISH 7 Random play Mode Plays at random FLDR RND * : All tracks of the current folder, then the tracks of the next folder and so on. [ ] ALL RND : All tracks of the current disc. [ ] RND OFF : Cancels. * KD-G396/KD-G395: Only while playing an MP3 or a WMA disc.
11 ENGLISH General settings — PSM You can change PSM (Preferred Setting Mode) items listed in the table on page 12. 1 2 Select a PSM item. 3 Adjust the PSM item selected. 4 Repeat steps 2 and 3 to adjust other PSM items if necessary. 5 Finish the procedure.
12 ENGLISH Indications Item ( : Initial) Selectable settings, [reference page] DEMO Display demonstration • DEMO ON • DEMO OFF : The display demonstration will be activated automatically if no operation is done for about 20 seconds, [6]. : Cancels.
13 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
14 ENGLISH • KD-G396/KD-G395: MP3 and WMA “tracks” (words “file” and “track” are used interchangeably) are recorded in “folders.” • KD-G396/KD-G395: While fast-forwarding or reversing on an MP3 or WMA disc, you can only hear intermittent sounds.
ENGLISH 15 • The search function works but search speed is not constant. Changing the source • If you change the source, playback also stops (without ejecting the disc). Next time you select “CD” for the playback source, disc play starts from where it has been stopped previously.
16 ENGLISH Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). FM/AM • SSM automatic presetting does not work.
ENGLISH 17 Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
© 2007 Victor Company of Japan, Limited EN, IN 0807DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Ada MASALAH dengan cara pengoperasian? Setel kembali unit Anda Lihat halaman mengenai Bagaimana mereset unit anda Rear_KD-G396_004A_f.
1 KD-G396/KD-G395/KD-G245 Installation/Connection Manual Manual Pemasangan/Penyambungan GET0486-009A [ UN ] 0807DTSMDTJEIN EN, IN ENGLISH This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers.
2 When installing the unit without using the sleeve / Ketika memasang alat penerima tanpa menggunakan selongsong In a Toyota car for example, first remove the car radio and install the unit in its place. Dalam sebuah kereta Toyota misalnya, pertama pindahkan radio mobil dan pasang alat penerima tersebut ke dalam tempatnya.
3 Typical connections / Ciri khas sambungan-sambungan Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color.
4 Connecting the external amplifier (only for KD-G396/KD-G395) / Penyambungan penguat eksternal (hanya untuk KD-G396/KD-G395) You can connect an amplifier to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit.
ENGLISH CD RECEIVER KD-G396/KD-G395/KD-G245 KD-G396/KD-G395/KD-G245 For canceling the display demonstration, see page 6. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0486-005A [UT] Cover_KD-G396_005A_f.indd 1 Cover_KD-G396_005A_f.
2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
ENGLISH 3 How to use the M MODE button If you press M MODE, the unit goes into functions mode, then the number buttons and 5 / ∞ buttons will work as different function buttons.
4 ENGLISH ; RND (random) button a AUX (auxiliary) input jack s KD-G396/KD-G395: Disc information indicators— TAG (Tag information), (track/file), (folder) d DISC indicator f Playback mode / item ind.
ENGLISH 5 Remote controller — RM-RK50 RM-RK50 is supplied only for KD-G396/KD-G395. Installing the lithium coin battery (CR2025) Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle in between. Warning: • Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode.
6 ENGLISH Basic settings • See also “General settings — PSM” on pages 11 and 12. 1 2 1 Canceling the display demonstrations Select “DEMO,” then “DEMO OFF.” 2 Setting the clock Select “CLOCK H” (hour), then adjust the hour. Select “CLOCK M” (minute), then adjust the minute.
ENGLISH 7 Storing stations in memory You can preset six stations for each band. FM station automatic presetting — SSM (Strong-station Sequential Memory) 1 Select the FM band (FM1 – FM3) you want to store into. 2 3 “SSM” flashes, then disappears when automatic presetting is over.
8 ENGLISH To fast-forward or reverse the track To go to the next or previous track To go to the next or previous folder (for MP3/ WMA discs in KD-G396/KD-G395) To locate a particular track (for CD) or.
9 ENGLISH Other main functions Skipping tracks quickly during play • KD-G396/KD-G395: For MP3 or WMA discs, you can skip tracks within the same folder Ex.: To select track 32 while playing tracks whose number is a single digit (1 to 9) 1 2 Each time you press the button, you can skip 10 tracks.
10 ENGLISH 7 Random play Mode Plays at random FLDR RND * : All tracks of the current folder, then the tracks of the next folder and so on. [ ] ALL RND : All tracks of the current disc. [ ] RND OFF : Cancels. * KD-G396/KD-G395: Only while playing an MP3 or a WMA disc.
11 ENGLISH General settings — PSM You can change PSM (Preferred Setting Mode) items listed in the table on page 12. 1 2 Select a PSM item. 3 Adjust the PSM item selected. 4 Repeat steps 2 and 3 to adjust other PSM items if necessary. 5 Finish the procedure.
12 ENGLISH Indications Item ( : Initial) Selectable settings, [reference page] DEMO Display demonstration • DEMO ON • DEMO OFF : The display demonstration will be activated automatically if no operation is done for about 20 seconds, [6]. : Cancels.
13 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
14 ENGLISH • KD-G396/KD-G395: MP3 and WMA “tracks” (words “file” and “track” are used interchangeably) are recorded in “folders.” • KD-G396/KD-G395: While fast-forwarding or reversing on an MP3 or WMA disc, you can only hear intermittent sounds.
ENGLISH 15 • The search function works but search speed is not constant. Changing the source • If you change the source, playback also stops (without ejecting the disc). Next time you select “CD” for the playback source, disc play starts from where it has been stopped previously.
16 ENGLISH Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). FM/AM • SSM automatic presetting does not work.
ENGLISH 17 Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
© 2007 Victor Company of Japan, Limited EN, CT 0807DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Rear_KD-G396_005A_f.
1 J Handles 板條型把手 F Washer (ø5) 墊圈（ ø5 ） G Lock nut (M5) 鎖定螺母（ M5 ） H Mounting bolt (M4 × 5 mm; M5 × 15 mm) 緊固螺栓 （ M4 × 5 mm; M5 × 15 mm ） I Rubber cush.
2 When using the optional stay / 若選用支撐架 Note ： When installing the unit on the mounting bracket, make sure to use the 8 mm -long screws. If longer screws are used, they could damage the unit.
3 A Typical connections / 典型的接線方法 Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color.
4 * 3 Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place uncoated with paint (if coated with paint, remove the paint before attaching the wire).
ENGLISH FRANÇAIS CD RECEIVER RÉCEPTEUR CD KD-G343/KD-G342/KD-G341 For installation and connections, refer to the separate manual. Pour l’installation et les raccordements, se référer au manuel séparé. INSTRUCTIONS MANUEL D’INSTRUCTIONS GET0484-003A [EX/EU] For canceling the display demonstration, see page 5.
2 ENGLISH Warning: If you need to operate the unit while driving, be sure to look around carefully or you may be involved in a traffic accident. Information for Users on Disposal of Old Equipment This symbol indicates that the product with this symbol should not be disposed as general household waste at its end-of-life.
ENGLISH 3 How to use the M MODE button If you press M MODE, the unit goes into functions mode, then the number buttons and 5 / ∞ buttons will work as different function buttons.
4 ENGLISH ; RND (random) button a AUX (auxiliary) input jack s Disc information indicators— TAG (Tag information), (track/file), (folder) d DISC indicator f Playback mode / item indicators—RND (ra.
ENGLISH 5 Basic settings • See also “General settings — PSM” on pages 13 – 15. 1 2 1 Canceling the display demonstrations Select “DEMO,” then “DEMO OFF.” 2 Setting the clock Select “CLOCK H” (hour), then adjust the hour. Select “CLOCK M” (minute), then adjust the minute.
6 ENGLISH When an FM stereo broadcast is hard to receive Reception improves, but the stereo effect will be lost. To restore the stereo effect, repeat the same procedure. “MONO OFF” appears and the MO indicator goes off. Storing stations in memory You can preset six stations for each band.
7 ENGLISH Manual presetting Ex.: Storing the FM station of 92.5 MHz into preset number 4 of the FM1 band. 1 2 3 Listening to a preset station 1 2 Select the preset station (1 – 6) you want. To check the current clock time while listening to an FM (non-RDS) or AM station • For FM RDS stations, see page 9.
8 ENGLISH Using the standby receptions TA Standby Reception TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from any source other than AM. The volume changes to the preset TA volume level if the current level is lower than the preset level (see page 14).
9 ENGLISH To check the current clock time while listening to an FM RDS station PTY codes NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, POP M (music), ROCK M (music), EASY M (mu.
10 ENGLISH Other main functions Skipping tracks quickly during play • For MP3 or WMA discs, you can skip tracks within the same folder. Ex.: To select track 32 while playing a track whose number is a single digit (1 to 9) 1 2 Each time you press the button, you can skip 10 tracks.
11 ENGLISH Changing the display information While playing an audio CD or CD Text A = B = Disc title/performer * 1 = Track title * 1 [ ] = (back to the beginning) While playing an MP3 or a WMA track .
12 ENGLISH Sound adjustments You can select a preset sound mode suitable to the music genre (c-EQ: custom equalizer). 1 2 Indication (For) BAS (bass) TRE (treble) LOUD (loudness) USER (Flat sound) 00 .
13 ENGLISH You can change PSM (Preferred Setting Mode) items listed in the table below, on page 14 and 15. 1 2 Select a PSM item. General settings — PSM 3 Adjust the PSM item selected. 4 Repeat steps 2 and 3 to adjust other PSM items if necessary. 5 Finish the procedure.
14 ENGLISH Indications Item ( : Initial) Selectable settings, [reference page] CLK ADJ * 2 Clock adjustment • AUTO • OFF : The built-in clock is automatically adjusted using the CT (clock time) data in the RDS signal.
ENGLISH 15 Indications Item ( : Initial) Selectable settings, [reference page] AUX ADJ Auxiliary input level adjustment A.ADJ 00 — A.ADJ 05 : Adjust the auxiliary input level to avoid the sudden increase of the output level when changing the source from external component connected to the AUX input jack on the control panel.
16 ENGLISH To keep discs clean A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvents (for example, conventional record cleaner, spray, thinner, benzine, etc.
ENGLISH 17 More about this unit Basic operations Turning on the power • By pressing SRC on the unit, you can also turn on the power. If the source is ready, playback also starts.
18 ENGLISH • CD-RWs may require a longer readout time since the reflectance of CD-RWs is lower than that of regular CDs. • Do not use the following CD-Rs or CD-RWs: – Discs with stickers, labels, or protective seal stuck to the surface. – Discs on which labels can be directly printed by an ink jet printer.
ENGLISH 19 Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). FM/AM • SSM automatic presetting does not work.
20 ENGLISH Symptoms Remedies/Causes MP3/WMA playback • Disc cannot be played back. • Use a disc with MP3/WMA tracks recorded in a format compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet. • Add the extension code <.mp3> or <.wma> to the file names.
ENGLISH 21 Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
EN, FR 0807DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Vous avez des PROBLÈMES de fonctionnement? Réinitialisez votre appareil Référez-.
1 KD-G343/KD-G342/KD-G341 Installation/Connection Manual Manuel d’installation/raccordement 0807DTSMDTJEIN EN, FR ENGLISH This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC IN-CAR ENTERTAINMENT dealers.
2 Do the required electrical connections. Réalisez les connexions électriques. * 1 Lorsque vous mettez l’appareil à la verticale, faire attention de ne pas endommager le fusible situé sur l’arrière. * 2 Non fourni avec cet autoradio. Bend the appropriate tabs to hold the sleeve firmly in place.
3 Line out (see diagram ) Sortie de ligne (voir le diagramme ) Rear ground terminal Borne arrière de masse 15 A fuse Fusible 15 A Black Noir Blue with white stripe Bleu avec bande blanche Red Rouge Y.
4 Connecting the external amplifier / Connexion d’un amplificateur extérieur You can connect an amplifier to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit.
ENGLISH DEUTSCH РУCCKИЙ CD RECEIVER CD-RECEIVER РЕСИВЕР С ПРОИГРЫВАТЕЛЕМ КОМПАКТ-ДИСКОВ KD-G343/KD-G342/KD-G341 For installation and connections, refer to the separate manual. Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.
2 ENGLISH Warning: If you need to operate the unit while driving, be sure to look around carefully or you may be involved in a traffic accident. Information for Users on Disposal of Old Equipment This symbol indicates that the product with this symbol should not be disposed as general household waste at its end-of-life.
ENGLISH 3 How to use the M MODE button If you press M MODE, the unit goes into functions mode, then the number buttons and 5 / ∞ buttons will work as different function buttons.
4 ENGLISH ; RND (random) button a AUX (auxiliary) input jack s Disc information indicators— TAG (Tag information), (track/file), (folder) d DISC indicator f Playback mode / item indicators—RND (ra.
ENGLISH 5 Basic settings • See also “General settings — PSM” on pages 13 – 15. 1 2 1 Canceling the display demonstrations Select “DEMO,” then “DEMO OFF.” 2 Setting the clock Select “CLOCK H” (hour), then adjust the hour. Select “CLOCK M” (minute), then adjust the minute.
6 ENGLISH When an FM stereo broadcast is hard to receive Reception improves, but the stereo effect will be lost. To restore the stereo effect, repeat the same procedure. “MONO OFF” appears and the MO indicator goes off. Storing stations in memory You can preset six stations for each band.
7 ENGLISH Manual presetting Ex.: Storing the FM station of 92.5 MHz into preset number 4 of the FM1 band. 1 2 3 Listening to a preset station 1 2 Select the preset station (1 – 6) you want. To check the current clock time while listening to an FM (non-RDS) or AM station • For FM RDS stations, see page 9.
8 ENGLISH Using the standby receptions TA Standby Reception TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from any source other than AM. The volume changes to the preset TA volume level if the current level is lower than the preset level (see page 14).
9 ENGLISH To check the current clock time while listening to an FM RDS station PTY codes NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, POP M (music), ROCK M (music), EASY M (mu.
10 ENGLISH Other main functions Skipping tracks quickly during play • For MP3 or WMA discs, you can skip tracks within the same folder. Ex.: To select track 32 while playing a track whose number is a single digit (1 to 9) 1 2 Each time you press the button, you can skip 10 tracks.
11 ENGLISH Changing the display information While playing an audio CD or CD Text A = B = Disc title/performer * 1 = Track title * 1 [ ] = (back to the beginning) While playing an MP3 or a WMA track .
12 ENGLISH Sound adjustments You can select a preset sound mode suitable to the music genre (c-EQ: custom equalizer). 1 2 Indication (For) BAS (bass) TRE (treble) LOUD (loudness) USER (Flat sound) 00 .
13 ENGLISH You can change PSM (Preferred Setting Mode) items listed in the table below, on page 14 and 15. 1 2 Select a PSM item. General settings — PSM 3 Adjust the PSM item selected. 4 Repeat steps 2 and 3 to adjust other PSM items if necessary. 5 Finish the procedure.
14 ENGLISH Indications Item ( : Initial) Selectable settings, [reference page] CLK ADJ * 2 Clock adjustment • AUTO • OFF : The built-in clock is automatically adjusted using the CT (clock time) data in the RDS signal.
ENGLISH 15 Indications Item ( : Initial) Selectable settings, [reference page] AUX ADJ Auxiliary input level adjustment A.ADJ 00 — A.ADJ 05 : Adjust the auxiliary input level to avoid the sudden increase of the output level when changing the source from external component connected to the AUX input jack on the control panel.
16 ENGLISH To keep discs clean A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvents (for example, conventional record cleaner, spray, thinner, benzine, etc.
ENGLISH 17 More about this unit Basic operations Turning on the power • By pressing SRC on the unit, you can also turn on the power. If the source is ready, playback also starts.
18 ENGLISH • CD-RWs may require a longer readout time since the reflectance of CD-RWs is lower than that of regular CDs. • Do not use the following CD-Rs or CD-RWs: – Discs with stickers, labels, or protective seal stuck to the surface. – Discs on which labels can be directly printed by an ink jet printer.
ENGLISH 19 Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). FM/AM • SSM automatic presetting does not work.
20 ENGLISH Symptoms Remedies/Causes MP3/WMA playback • Disc cannot be played back. • Use a disc with MP3/WMA tracks recorded in a format compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet. • Add the extension code <.mp3> or <.wma> to the file names.
ENGLISH 21 Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
EN, GE, RU 0807DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Haben Sie PROBLEME mit dem Betrieb? Bitte setzen Sie Ihr Gerät zurück Siehe Se.
1 KD-G343/KD-G342/KD-G341 Installation/Connection Manual Einbau/Anschlußanleitung Руководство по установке/подключению 0807DTSMDTJEIN EN, GE, RU ENGLISH This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems .
2 INSTALLATION (IN-DASH MOUNTING) The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC IN-CAR ENTERTAINMENT dealer or a company supplying kits. • If you are not sure how to install this unit correctly, have it installed by a qualified technician.
3 ENGLISH DEUTSCH A Line out (see diagram ) Schutz kappen Signalausgang (siehe Schaltplan ) К выходу (см. схему ) Rear ground terminal Hintere Erdungsc-anschlußklemme Задний ра.
4 B Connecting the external amplifier / Anschließen des externen Verstärkers / Подключение внешнего усилителя You can connect an amplifier to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit.
1– EN ENGLISH [European Union only] IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and/or invisible class 1M laser radiation when open.
2 – EN INSTRUCTIONS Standby receptions TA Standby Reception TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from any source other than AM. To activate/deactivate • If the TP indicator flashes, TA Standby Reception is not yet activated.
3 – EN Audio amplifier section Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
4 – EN INSTALLATION / CONNECTION PREPARATION This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC IN-CAR ENTERTAINMENT dealers.
For canceling the display demonstration, see page 6. INSTRUCTIONS GET0554-001A [UI] CD RECEIVER KD-G396S Cover_KD-G396[UI]f.indd 1 Cover_KD-G396[UI]f.indd 1 1/15/08 11:25:39 AM 1/15/08 11:25:39 AM.
2 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
3 How to use the M MODE button If you press M MODE, the unit goes into functions mode, then the number buttons and 5 / ∞ buttons will work as different function buttons.
4 ; RND (random) button a AUX (auxiliary) input jack s Disc information indicators— TAG (Tag information), (track/file), (folder) d DISC indicator f Playback mode / item indicators—RND (random), (.
5 Remote controller — RM-RK50 Installing the lithium coin battery (CR2025) Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle in between. Warning: • Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode.
6 Basic settings • See also “General settings — PSM” on pages 11 and 12. 1 2 1 Canceling the display demonstrations Select “DEMO,” then “DEMO OFF.” 2 Setting the clock Select “CLOCK H” (hour), then adjust the hour. Select “CLOCK M” (minute), then adjust the minute.
7 Storing stations in memory You can preset six stations for each band. FM station automatic presetting — SSM (Strong-station Sequential Memory) 1 Select the FM band (FM1 – FM3) you want to store into. 2 3 “SSM” flashes, then disappears when automatic presetting is over.
8 To fast-forward or reverse the track To go to the next or previous track To go to the next or previous folder (for MP3/ WMA discs) To locate a particular track (for CD) or folder (for MP3/WMA discs).
9 Other main functions Skipping tracks quickly during play • For MP3 or WMA discs, you can skip tracks within the same folder Ex.: To select track 32 while playing tracks whose number is a single digit (1 to 9) 1 2 Each time you press the button, you can skip 10 tracks.
10 7 Random play Mode Plays at random FLDR RND * : All tracks of the current folder, then the tracks of the next folder and so on. [ ] ALL RND : All tracks of the current disc.
11 General settings — PSM You can change PSM (Preferred Setting Mode) items listed in the table on page 12. 1 2 Select a PSM item. 3 Adjust the PSM item selected. 4 Repeat steps 2 and 3 to adjust other PSM items if necessary. 5 Finish the procedure.
12 Indications Item ( : Initial) Selectable settings, [reference page] DEMO Display demonstration • DEMO ON • DEMO OFF : The display demonstration will be activated automatically if no operation is done for about 20 seconds, [6].
13 Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
14 • MP3 and WMA “tracks” (words “file” and “track” are used interchangeably) are recorded in “folders.” • While fast-forwarding or reversing on an MP3 or WMA disc, you can only hear intermittent sounds. Playing a CD-R or CD-RW • Use only “finalized” CD-Rs or CD-RWs.
15 Changing the source • If you change the source, playback also stops (without ejecting the disc). Next time you select “CD” for the playback source, disc play starts from where it has been stopped previously.
16 Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). FM/AM • SSM automatic presetting does not work.
17 Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
© 2008 Victor Company of Japan, Limited EN 0308DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Rear_KD-G396[UI]f.
1– EN ENGLISH ESPAÑOL INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
2 – EN INSTRUCTIONS Sound adjustments Indication (For) BAS (bass) MID (mid-range) TRE (treble) LOUD (loudness) USER (Flat sound) 00 00 00 OFF ROCK (Rock or disco music) +03 00 +02 OFF CLASSIC (Class.
3 – EN You need the installation kits which corresponds to your car. • Mark all the check boxes ( ) to make sure you have follow the instructions and the listed parts.
4 – EN INSTALLATION / CONNECTION When using the optional stay Install the unit at an angle of less than 30˚. Screw (option) Stay (option) Fire wall Dashboard * Not supplied for this unit.
1– EN ENGLISH [European Union only] IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and/or invisible class 1M laser radiation when open.
2 – EN INSTRUCTIONS Standby receptions TA Standby Reception TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from any source other than AM. To activate/deactivate • If the TP indicator flashes, TA Standby Reception is not yet activated.
3 – EN Audio amplifier section Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
4 – EN INSTALLATION / CONNECTION PREPARATION This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC IN-CAR ENTERTAINMENT dealers.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il JVC MA372IEN è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del JVC MA372IEN - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso JVC MA372IEN imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul JVC MA372IEN ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il JVC MA372IEN, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del JVC MA372IEN.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il JVC MA372IEN. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo JVC MA372IEN insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
