Manuale d’uso / di manutenzione del prodotto generator del fabbricante Yamaha
Vai alla pagina of 48
Generator LIT -19626-01-53 7DK-28199-10 PRINTED ON RECYCLED P APER PRINTED IN JAP AN 2009.01-1.0 × 1 ! (E) EF2000iS O WNER’S MANU AL Read this manual carefully bef ore operating this machine.
Read this manual carefully bef or operating this machine.This manual should stay with this mac hine if it is sold. 7DK-9-10_hyoshi 09.1.20 4:43 PM Page 3.
AE00002 INTRODUCTION Congratulations on y our purchase of your ne w Y amaha. This manual will provide y ou with a good basic understanding of the operation and main- tenance of this machine. If you ha ve an y questions regarding the operation or maintenance of your machine, please consult a Y amaha dealer .
P ar ticularly impor tant information is distin- guished in this manual b y the following notations. This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety mes- sages that follo w this symbol to av oid possible injury or death.
AE00041 CONTENTS SAFETY INFORMA TION .........................1 EXHA UST FUMES ARE POISONOUS ........................................1 FUEL IS HIGHL Y FLAMMABLE AND POISONOUS ........................................1 ENGINE AND MUFFLER MA Y BE HO T ..
– 1 – 7DK-001 7DK-002 7DK-003 7DK-004 7DK-005 7DK-006 AE00071 SAFETY INFORMA TION AE00072 EXHA UST FUMES ARE POISONOUS 9 Ne ver operate the engine in a closed area or it ma y cause unconsciousness and death within a shor t time. Operate the engine in a w ell ventilated area.
– 2 – 7DK-007 a 7DK-008a 1 7DK-036 7DK-009 7DK-010 9 K eep the machine at least 1 m (3 ft) from buildings or other equipment, or the engine ma y overheat.
– 3 – 7DK-012 1 2 1 2 AE00088 CONNECTION NO TES 9 A void connecting the generator to commercial power outlet. 9 A void connecting the generator in par allel with any other generator .
– 4 – AE00062 LOCA TION OF IMPORT ANT LABELS Please read the f ollowing labels carefully before oper- ating this machine. TIP Maintain or replace saf ety and instr uction labels , as necessar y . 1 DANGER Using a generator indoors CAN KILL YOU IN MINUTES.
– 5 – 4 6 2 5 WARNING q 8 Read the owner ’ s manual and all labels before operating. 8 Only operate in well-ventilated areas. Exhaust gas contains poisonous carbon monoxide. 8 Check for spilled fuel or fuel leaks. 8 Stop engine before refueling.
1 2 3 4 7DK-015 – 6 – DESCRIPTION 1 Carrying handle 2 Fuel tank cap air vent knob 3 Fuel tank cap 4 Recoil star ter 5 Fuel gauge 6 Muffler 7 Oil filler cap AE00103 Control panel 1 Oil warning ligh.
– 7 – 1 2 7DK-018 700-115 AE00111 Oil warning light (Red) When the oil le vel f alls below the low er lev el, the oil warning light comes on and then the engine stops auto- matically .
– 8 – AE00142 Econom y control switc h 1 I “ ON ” When the economy control s witch is tur ned to “ ON ” 1 , the economy control unit controls the engine speed according to the connected load. The results are better fuel consumption and less noise.
– 9 – AE01087 Overload indicator light (Red) The ov erload indicator light 1 comes on when an over- load of a connected electrical device is detected, the inv er ter control unit ov erheats, or the A C output voltage rises.
– 10 – 1 2 7DK-023 1 2 7DK-024 1 7DK-011 Fuel cock knob The fuel cock supplies fuel from the fuel tank to the car- buretor . The fuel cock has tw o positions. 1 “ ON ” With the knob in this position, fuel flows to the carb ure- tor . Nor mal using is done with the knob in this position.
Remov e the fuel tank cap and fill the fuel into the tank up to the red le vel 2 . The fuel le vel in the fuel tank can be check ed through the fuel le vel gauge 1 .
1 Upper lev el 5. Install the cov er and tighten the screws. – 12 – 7DK-031 1 7DK-033 700-119 1 AE00222 Engine oil The generator has been shipped without engine oil. Do not start the engine till fill with the sufficient engine oil. 1. Place the generator on a le vel surf ace.
– 13 – AE00845 PRE-OPERA TION CHECK If any item in the Pre-operation c heck is not work- ing properl y , have it inspected and repaired before operating the generator . The condition of a generator is the owner's responsibil- ity . Vital components can star t to deteriorate quickly and une xpectedly , ev en if the generator unused.
– 14 – 7DK-047 1 7DK-038 1 7DK-039 AE00846 OPERA TION 9 Never operate the engine in a c losed area or it may cause unconsciousness and death within a short time . Operate the engine in a well venti- lated area. 9 Before starting the engine, do not connect an y electric devices.
– 15 – 7. After the engine star ts , warm up the engine until the engine does not stop when the choke knob is returned to the or iginal position. TIP When star ting the engine, with the econom y c.
– 16 – 1 7DK-034 7DK-047 1 7DK-044 1 7DK-045 1 7DK-092 AE01025 Stopping the engine TIP T ur n off any electric de vices. 1. T ur n the econom y control switch (Blac k) to “ OFF ” 1 . 1 3 “ OFF ” 3. T ur n the engine s witch (Red) to “ STOP ” 1 .
– 17 – AE00839 Connection Alternating Current (A C) Be sure any electric de vices are turned off before plugging them in. 9 Be sure all electric devices inc luding the lines and plug connections are in good condition before connection to the generator .
– 18 – Battery Charging TIP 9 The generator DC rated v oltage is 12V . 9 Star t the engine first, and then connect the gener- ator to the batter y f or charging. 9 Bef ore star ting to charge the batter y , make sure that the DC protector is turned on.
– 19 – 762-012 TIP 9 F ollow instructions in the owner ’ s manual f or the batter y to determine the end of batter y charging. 9 Measure the specific gra vity of electrolyte to deter- mine if the batter y is fully charged. At full charge, the electrolyte specific gra vity is between 1.
– 20 – AE00812 Application range When using the generator , make sure the total load is within rated output of a generator . Otherwise, generator damage ma y occur. 9 Do not overload. The total load of all electrical appliances m ust not exceed the supply range of the generator .
– 21 – AE00401 PERIODIC MAINTENANCE Saf ety is an obligation of the owner . P eriodic inspection, adjustment and lubr ication will keep y our generator in the saf est and most efficient condition possible. The most impor- tant points of generator inspection, adjustment, and lubrication are explained on the f ol- lowing pages .
– 22 – *1 ····· Initial replacement of the engine oil is after one month or 20 hours of operation. *2 ····· The air filter element needs to be cleaned more frequently when using in unusually wet or dusty areas.
– 23 – 4. Chec k for discoloration and remo ve the carbon. The porcelain insulator around the center elec- trode of spark plug should be a medium-to-light tan color . 5. Chec k the spar k plug type and gap a . TIP The spark plug gap should be measured with a wire thickness gauge and, if necessary , adjusted to specifi- cation.
– 24 – Spark Plug T orque: 20.0 N • m (2.0 kgf • m, 14.8 lbf • ft) 6. Install the spark plug. TIP If a torque wrench is not av ailable when installing a spark plug, a good estimate of the correct torque is 1/4- 1/2 turn past finger tight. Howe ver , the spark plug should be tightened to the specified torque as soon as possible .
– 25 – 4. Place an oil pan under the engine. Tilt the genera- tor to drain the oil completely . 5. Replace the generator on a le vel surf ace. Do not tilt the generator when adding engine oil. This could result in overfilling and dama g e to the engine.
– 26 – AE01084 Air filter 1. Remov e the screws 1 , and then remov e the cover 2 . 2. Remov e the screw 1 and then remov e the air filter case cov er 2 . 1 2 7DK-030 1 2 7DK-061 3. Remov e the foam element 1 . 4. W ash the foam element in solvent and dry it.
– 27 – 7DK-026 1 2 1 7DK-066 1 2 3 7DK-063 7DK-064 4 7DK-065 AE01075 Muffler screen and spark arrester The engine and muffler will be very hot after the engine has been run. A void touc hing the engine and muffler while they are still hot with any part of your bod y or clothing during inspection or repair .
– 28 – 2 1 7DK-065a 7DK-068 6. Install the muffler screen and the m uffler cap. 7. Install the cov er and tighten the screws. 3. Remov e the carbon deposits on the muffler screen and spark arrester using a wire br ush. When cleaning, use the wire brush lightly to a void damaging or scratching of the m uffler screen and spark arrester .
– 29 – 7DK-069 1 AE00471 Fuel tank filter Never use the gasoline while smoking or in the vicinity of an open flame. 1. Remov e the fuel tank cap and filter 1 . 2. Clean the filter with gasoline. If damaged, replace it. 3. Wipe the filter and install it.
– 30 – AE00601 ST ORA GE Long term storage of your machine will require some pre ventiv e procedures to guard against deter ioration. 1 7DK-044 7DK-025 1 7DK-039 1 7DK-035 AE01056 Drain the fuel 1. T ur n the engine s witch to “ STOP ” 1 . 2. Remov e the fuel tank cap.
– 31 – 6. Remov e the screws 1 , and then remov e the cover 2 . 7. Drain the fuel from the carb uretor by loosening the drain scre w 3 on the carburetor float chamber . 8. T ur n the engine s witch to “ OFF ” . 9. T ur n the fuel coc k knob to “ OFF ” .
– 32 – Engine P erform the following steps to protect the cylinder , pis- ton ring, etc. from corrosion. 1. Remov e the spar k plug, pour about one table- spoon of SAE 10W -30 or 20W -40 motor oil into the spark plug hole and reinstall the spar k plug.
– 33 – 7DK-091 1 7DK-035 1 7DK-038 700-006 AE00512 TROUBLESHOO TING Engine won ’ t start 1. Fuel systems No fuel supplied to combustion chamber . 2 No fuel in tank .... Supply fuel. 2 Fuel in tank .... Fuel tank cap air vent knob and fuel cock knob to “ ON ” 1 .
– 34 – AE00515 Generator won ’ t pr oduce power 2 Saf ety device (DC protector) to “ OFF ” 2 ···· Press the DC protector to “ ON ” 1 . 2 Saf ety device (A C) to “ OFF ” .... Stop the engine,then restart. 1 2 7DK-052 7DK-041 791-001d 3.
B – 35 – PO K O Clogged C Does not flick er D Flick ers. AE00515 A ENGINE DOES NO T ST ART T urn the engine switch to “ ON ” , then pull the recoil star ter and chec k if the oil warining light flick ers. H Pull the recoil star ter and chec k the spark plug for spark strength.
– 36 – Unit EF2000iS T ype Air cooled 4-stroke gasoline OHV Cylinder Arrangement Inclined, 1 cylinder Displacement cm 3 79 Bore × Stroke mm (in) 48.6 × 43.0 (1.91 × 1.69) Operation Hours Hr 4.2 – 10.5 (rated load – 1/4 load) Fuel Unleaded gasoline Fuel T ank Capacity L (US gal, Imp gal) 4.
– 37 – AE00012 Identification number recor ds Record your Primary I.D ., and serial num- bers in the spaces provided, to assist y ou in ordering spare par ts from a Y amaha dealer . Also record and keep these I.D . numbers in a separate place in case y our machine is stolen.
– 38 – Y amaha Motor Cor poration, U .S.A. hereby w arrants that new Y amaha consumer generators purchased from an authorized Y amaha consumer generator dealer in the continental United States will be free from defects in material and workmanship f or the period of time stated herein, subject to cer tain stat- ed limitations.
– 39 – W ARRANTY QUESTIONS AND ANSWERS Q. What costs are m y responsibility during the warranty period? A. The customer ’ s responsibility includes all costs of normal maintenance ser vice, non-warr anty repairs, accident damages, as w ell as oil and spark plugs.
– 40 – AE00789 EXHA UST EMISSION CONTROL SYSTEM AND COMPONENTS Item Acron ym 9 CARB. ASSY ., LH. & JT ., .......................CARB (Carburetor) CARBURET OR2 9 T .C.I. MA GNETO ASSY . & .....................EI (Electronic Ignition) PLUG, SP ARK 9 CRANKCASE1 & HEAD , .
– 41 – W Br R R Br R Br R Br R Br R Br Br B B B B B BB B B B Y Y O O O Y Y Y Y Y Y Y Y Y Y R RR R R L L L L L L L L L G G Y Y O O O O O O L O O B/W B/W R/W Br Br Br R/W R/W R/W G/Y G/Y O G/Y 2 1 3.
Read this manual carefully bef or operating this machine.This manual should stay with this mac hine if it is sold. 7DK-9-10_hyoshi 09.1.20 4:43 PM Page 3.
Generator LIT -19626-01-53 7DK-28199-10 PRINTED ON RECYCLED P APER PRINTED IN JAP AN 2009.01-1.0 × 1 ! (E) EF2000iS O WNER’S MANU AL Read this manual carefully bef ore operating this machine.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Yamaha generator è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Yamaha generator - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Yamaha generator imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Yamaha generator ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Yamaha generator, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Yamaha generator.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Yamaha generator. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Yamaha generator insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
