Manuale d’uso / di manutenzione del prodotto DG60FX-112 del fabbricante Yamaha
Vai alla pagina of 32
Owner’ s Manual.
2 ADVARSEL! Lithiumbatteri—Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren. VARNING Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent typ som rekommenderas av apparattillverkaren.
3 WARNING- When using any electrical or electronic prod- uct, basic precautions should always be followed. These precau- tions include, but are not limited to, the following: 1.
4 Thank you for pur c hasing the Y AMAHA DG60FX-112 Guitar Amplif ier . T o fully under stand the functions and to obtain maxi- mum life of this device , please r ead this Owner’ s Manual car efully befor e using. Also, after r eading this manual, please keep it and the warranty in a safe place for futur e r eference .
5 About the Backup Battery A backup battery (lithium battery) is used to keep internal data (settings) from being lost, even when the power cord is unplugged.
6 Nomenclature ■ Contr ol Panel q Input Jacks (INPUT HIGH, LO W) These are the input jacks for the DG60FX-1 12. Con- nect the guitar here. Use the jack labeled LOW for high output guitars and the jack labeled HIGH for low output guitars. * Make sure the power is switc hed OFF before connecting a guitar .
7 Nomenclature !2 Manual Button (MANU AL) Independent of the selected patch’s settings, this button changes the sound to the settings of the knob’s current position. The lamp will flash if the patch setting is changed. Press the [MANUAL] and [UTILITY] buttons simul- taneously to enter the External Control Setting Mode.
8 Nomenclature ■ Rear P anel @6 P ower Switch (PO WER) Power switch for the main unit. * T o pr otect the speakers, set the OUTPUT knob u to “0” befor e switching the power ON/OFF .
9 Nomenclature #4 #6 #5 #7 ● T op Panel ● Rear Panel #4 Foot Switches 1, 2, 3 According to the settings in the Utility Mode ( → page 23), the switches can be used as for the following functions. • Selects a patch (1/2/3) fr om the currently selected bank.
10 Connections Before making an y connections to any of the DG60FX-112’ s INPUT and/or OUTPUT jacks, make sure that the power on the DG60FX-112 and all other de vices is turned OFF to pre- vent electrical shock or dama ge to the devices.
11 ■ Connecting Headphones Connect a pair of headphones to the PHONES jack (standard stereo) on the DG60FX-1 12 to play or practice in private. The volume of the headphones can be controlled with the OUTPUT knob.
12 Using the DG60FX-112 First, connect a guitar to the DG60FX-112 and try some sounds. ■ Produce Sound 1. Before connecting, turn off the power on the DG60FX-1 12 and connect a guitar to either the LOW or HIGH INPUT jack.
13 ■ T r y Changing the Settings Use the knobs or buttons on the panel to create your own original tone. Using the DG60FX-112 • Continue rotating the knob in the previously de- scribed direction a.
14 Using the DG60FX-112 When another patch is selected, an y set- tings you ha ve altered will revert to their original settings. If you want to sa ve those settings, please use the Store operation described on page 17.
15 ■ T r y Selecting Another P atch The DG60FX-1 12 holds a total of 180 patch pro- grams (patch) in its internal memory . The 180 patches are divided into two areas each containing 10 groups, 3 banks and 3 patches. • AREA There are two areas, the USER AREA and the PRESET AREA .
16 ● Using the Foot Switch and the Bank Switch • Press a foot switch (1-3) to select the corre- sponding patch number 1-3 in the currently se- lected group/bank. * If the F oot Switch’ s function is set to “ EFF ” in the Utility mode, it will not be possible to select a patch using the F oot Switch.
17 Using the DG60FX-112 ■ Create and Store a Patc h Original settings can be stored in the USER AREA (01 1-933). T ry creating an original patch and then store it.
18 Using the DG60FX-112 ● Using the DG60FX-112 Without Patc hes The [MANUAL] button lets you control the DG60FX- 1 12 when patches are not used. Press the [MANUAL] button to enter the Manual Mode (the lamp lights). In this mode, all knobs and effect buttons are set to their present condition.
19 Compressor ● Comp (Compressor) Controlling the input signal (peak) this effect keeps the maximum level constrained to the level set with the knob. • COMP knob Rotate the knob to the right to increase the depth of the compression. When set to “0.
20 Effect Functions and Parameters • SPEED knob + [TREMOLO] Sets the phase difference between the left and right sounds. From 0 degrees to 360 degrees (0.0-10.0). Set to “5” the knob works like a ste- reo pan pot. • DEPTH knob + [TREMOLO] Sets the wave shape of the tremolo.
21 External Control Settings • trE : T one Control (TREBLE) • nnd : T one Control (MIDDLE) • bAS : T one Control (BASS) • PrE : T one Control (PRESENCE) • CP : Compressor Ef fect’s COMP se.
22 T uner Mode When the pitch is low , the CHORUS and FLANGER lamps will light. When the pitch is high, the ROT ARY and TREMOLO lamps will light. Tune the note until only the PHASER lamp lights. Tuning is complete. (At this time the BANK switch’s lamp will also light.
23 Utility Mode The Utility Mode is used for settings that co ver the o verall system of the DG60FX-112 suc h as the foot switc h, MIDI, external contr ol, EXP . PED AL jack, etc. ■ About the Utility Mode Press the [UTILITY] button to enter the Utility Mode (the lamp lights).
24 ■ MIDI Functions Press the [UTILITY] button and set the Amp Select switch to LEAD2 (“ mmd ” will appear). ● Create a MIDI Program Change Receive T able Sets the corresponding patch that will be recalled when a MIDI Program Change No. (referred to as PRG No.
25 T o send all USER AREA data ( 011 - 933 ) plus Utility settings with the Bulk Out operation. Press the [T APE ECHO] button (“ ALL ” will appear on the display), then press the [STORE] button to carry out the MIDI Bulk Out. T o send a single USER AREA patch (data) with the Bulk Out operation.
26 Utility Mode ● Set the P arameter’ s Maxim um V alue Press the [TREMOLO] button and use the [UP]/ [DOWN] buttons to set the parameter’s maximum value (the parameter’s value when the controller is set to its maximum: 0.
27 ■ W ah P edal Settings These settings are available when the Wah Pedal function (“ UUH ”) is selected as the controller in the External Control settings. Press the [UTILITY] button then set the amp select switch to CRUNCH1 (“ UUH ” will appear on the dis- play).
28 Error Messages If an error occur s during operation, one of the follo wing error messa ge numbers will appear on the display . E1 : MIDI Receive Buffer Full CA USE: T oo much MIDI data is being received by the DG amplifier at one time. SOLUTION: Try reducing the amount of data being sent or , break the data into smaller blocks.
29 Specifications Digital Section • Full Digital Signal Processing • 8 Channel Preamp • Digital Effects • Compressor • Chorus, Flanger, Phaser , Rotary Speaker , T remolo • Digital Delay ,.
30 MIDI Implementation Chart YAMAHA [ Guitar Amplifier] Date:30-Jun-2000 Model DG60FX-112 MIDI Implementation Chart Version : 1.0 +----------------------------------------------------------------------+ : : Transmitted : Recognized : Remarks : : Function .
31 MIDI Implementation Chart : : : : : : : : : : : : : : : : : : : : : : : : : :-------------------+----------------+----------------+----------------: :Prog : o 0 - 127 : o 0 - 127 : : :Change : True.
Printed in T aiwan V611000.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Yamaha DG60FX-112 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Yamaha DG60FX-112 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Yamaha DG60FX-112 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Yamaha DG60FX-112 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Yamaha DG60FX-112, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Yamaha DG60FX-112.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Yamaha DG60FX-112. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Yamaha DG60FX-112 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
