Manuale d’uso / di manutenzione del prodotto DVA-9965E del fabbricante Alpine
Vai alla pagina of 70
EN CT R ALPINE DV A-9965E 68-02065Z32-A (CT) DV A-9965E Designed by ALPINE Japan Printed in Japan (Y) 68-02065Z32-A DVD-V ideo T uner ALPINE ELECTRONICS MARKETING, INC. 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan Phone 03-5496-8231 ALPINE ELECTRONICS OF AMERICA, INC.
ALPINE DV A-9965E 68-02065Z32-A (CT) CHM-S630 CHA-S634 • CD changer f or D V A-9965E. • 用於 DVA-9965E 的 CD 換碟器。 Alpine CD Changers Give You More! More musical selections, more versatility , more convenience. The CHA-S634 is a high-performance 6-disc changer with a new M DAC, CD-R/R W PLA Y BACK, MP3 PLA Y BACK and CD TEXT .
1 -EN ENGLISH Contents Operating Instructions W ARNING WA RNING ......................................................... 3 CA UTION .......................................................... 3 PRECA UTIONS ............................................
2 -EN SETUP Setup Operation ....................................................... 37 General Setting Setting the Clock display ........................................ 37 Playing MP3/WMA Data ........................................ 37 Sound (Beep) Guide Function .
3 -EN W ARNING W ARNING This symbol means important instructions. F ailure to heed them can result in serious injury or death. DO NOT OPERA TE ANY FUNCTION THA T T AKES YOUR A TTENTION AW A Y FROM SAFEL Y DRIVING YOUR VEHICLE. Any function that requires your prolonged attention should only be performed after coming to a complete stop.
4 -EN Never Attempt the Following Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism. Do not attempt to insert a disc into the unit when the unit po wer is off. Inserting Discs Y our player accepts only one disc at a time for playback.
5 -EN Discs playable on this unit Playable Discs The discs listed below can be played on this unit. Discs that cannot be played D VD-R OMs, D VD-RAMs, D VD + Rs, D VD + R Ws, CD-ROMs (excluding MP3/WMA f iles), photo CDs, etc.
6 -EN Multisession CD-R/R W : Once a recording has been stopped, this is considered as one session. If the disc is not closed (finalized), additional data may be added. Once this additional data has been recorded, this becomes a “multisession” CD.
7 -EN About the GlideT ouch™ Bar Operation 1 T ouch or press the desired position on the GlideT ouch bar . Press any one of the 6 positions on the GlideT ouch bar to which a function has been assigned in the guide display . For example, to select ON, press the GlideT ouch bar directly below where ON is indicated in the guide display .
8 -EN Getting Started Tu rning Power On and Off Press SOURCE/POWER to turn on the unit. • The unit can be turned on by pr essing any other button e xcept eject c and . Press and hold SOURCE/POWER for at least 2 seconds to turn off the unit. • The first time power is turned on, the volume will start fr om level 12.
9 -EN 2 1 1 Mov able display Opening and Closing the Movable Display Press c . The movable display will open. To close the mo vable displa y , press c again. The movable display will close. • Do not apply shock to the movable display when it is open as it may r esult in malfunction of the unit.
10 -EN Radio Listening to Radio 1 Press SOURCE/POWER until a radio frequency appears in the displa y . 2 Press BAND repeatedly until the desired radio band is displayed.
11 -EN CD/MP3/WMA Playback 1 Press c . The movable display will open. 2 Insert a disc with the label side facing up. The disc will be pulled into the unit automatically . The movable display will close and playback will begin. When a disc is already inserted, press SOURCE/PO WER to switch to the DISC mode.
12 -EN • The CD-player can play discs containing audio data, MP3 data and WMA data. •A WMA format file that is pr otected by DRM (Digital Rights Management) cannot be played bac k on this unit. • The track display for MP3/WMA data playbac k is the file numbers r ecorded on the disc.
13 -EN M.I.X. (Random Play) 1 Press FUNC. to activ ate the audio function mode. Source select mode → Audio function mode → Source operation mode → Sour ce select mode 2 Press the GlideT ouch bar under M.I.X. to select the Random Play mode. The tracks (files) will be played back in random sequence.
14 -EN Folder Name Searc h mode 3 Within 10 seconds, select the folder to pla y back by sliding your finger on the GlideT ouch bar to the left or right. Press - / J to play the selected f older . The first file in the selected folder is played back. To sear ch a file in the selected folder , press the GlideT ouch bar or FUNC.
15 -EN T erminology Bit rate This is the “sound” compr ession rate specif ied for encoding. The higher the bit rate, the higher the sound quality , but also the lar ger the files. Sampling rate This value shows how many times per second the data is sampled (r ecorded).
16 -EN DVD/Video CD •D VD and V ideo CD operation can be controlled fr om both the r emote contr ol and the main unit. In this section, both r emote contr ol and main unit operation ar e described. F or GlideT ouch bar details, r efer to page 20. •T o view D VD and V ideo CD, the optional TV monitor is r equir ed.
17 -EN Stopping Playback (PRE-STOP) Press L during playback to stop playback. That position is stored in memory . 1 During playbac k, press L on the remote control unit. “PRE-STOP” is displayed. 2 Press - / J in the PRE-ST OP mode . Playback starts from the position at which it was stopped.
18 -EN Searching Directly by Chapter or T rack Number Use this function to easily move to the be ginning of the chapters or tracks on the disc. • This operation is performed by the r emote contr ol unit. 1 During playbac k or pre-stop, input the chapter or track n umber you desire using the number keys (“0” to “9”).
19 -EN TV system (NTSC or P AL) Playback disc Current title number Current chapter number Chapter playback time Current audio language/number Repeat setting (Default setting - REPEA T OFF) Current subtitle language/number Current angle number 11 81 LA P T : EP Y EA RO F F AUD I O ENG 1 / 4 DO L BY 2 .
20 -EN Sound Setting Adjusting Balance (Between Left and Right)/ Fader (Between Front and Rear)/Defeat 1 Press the Rotary encoder (MODE) repeatedly to choose the desired mode.
21 -EN Adjusting and Storing the Parametric Equalizer Curve Y ou can modify the Equalizer settings to create a response curve more appealing to your personal taste. To adjust the parametric equalizer curve, set the EQ mode to P .EQ. F or details, refer to “Setting User's EQ mode” (this page).
22 -EN Adjusting and Storing the Graphic Equalizer Curve Y ou can modify the equalizer settings to create a response curve more appealing to your personal taste. T o adjust the graphic equalizer curve, set the EQ mode to G.EQ. F or details, refer to “Setting User's EQ mode” (page 21).
23 -EN About the Crossover Crosso ver: This unit is equipped with an acti ve crossov er . The crossov er limits the frequencies deli vered to the outputs. Each channel is controlled independently . Thus, each speak er pair can be driv en by the frequencies for which the y have been optimally designed.
24 -EN Adjusting and Storing the Crossover Settings Before performing the following procedures, refer to “ About the Crossov er” (Page 23). 1 Press and hold MENU for at least 2 seconds. 2 Select the Crosso ver mode by sliding y our fing er on the GlideT ouch bar to the left or right.
25 -EN Recalling the Stored Crossover Settings 1 Press and hold MENU for at least 2 seconds. 2 Select the Crosso ver mode by sliding y our fing er on the GlideT ouch bar to the left or right. Press the GlideT ouch bar under the Crosso ver mode. 3 Press FUNC.
26 -EN Setting the T ime Correction Unit Y ou can change the unit (ms, cm or inch) of time correction. 1 Press MENU . 2 Select Setup by sliding y our finger on the GlideT ouch bar to the left or right. Press the GlideT ouch bar under Setup. The main SETUP menu is displayed.
27 -EN 7 Select any one of the preset n umbers (1 thr ough 6) by sliding your finger on the GlideT ouch bar to the left or right. Press and hold the GlideT ouch bar under the desired preset for at least 2 seconds. The adjustments are saved in the selected preset.
28 -EN Chapter No./ Playback elapsed time Sound dependent display The display in MP3/WMA mode: TRACK NO ./ELAPSED TIME TEXT (DISC NAME/Performer) * 1 TEXT (TRACK NAME) * 1 TRACK NO ./ELAPSED TIME CALENDAR/CLOCK → TRACK NO ./ELAPSED TIME EXTERNAL AMPLIFIER INFORMA TION * 4 TRACK NO .
29 -EN About “T ext” Te xt: T ext compatible CDs contain text information such as the disc name and track name. Such text information is referred to as “text.” • Some character s may not be displayed correctly with this de vice, depending on the character type .
30 -EN Displaying the External Amplifier Information When an Amplifier Link compatible amplifier is connected, the amplifier's status (v oltage, temperature and fan status) can be sho wn in the head unit's display . 1 Press TITLE in the Radio or CD mode to switch the display of the e xternal amplifier information.
31 -EN Rear DVD Function 1 Select the desired audio source. 2 Press MENU . 3 Select Rear D VD by sliding y our finger on the GlideT ouch bar to the left or right. Press the GlideT ouch bar under Rear D VD. 4 Select ON or OFF by sliding y our fing er on the GlideT ouch bar to the left or right.
32 -EN Data Downloading 1 Insert the CD-R disc containing the data. If the source is not the DISC mode, press SOURCE/POWER to change to DISC mode. 2 Press MENU . 3 Select the Data Download mode b y sliding your finger on the GlideT ouch bar to the left or right.
33 -EN DVD Setup DVD Setup Operation •D VD Setup Operation is performed by the r emote contr ol unit. The follo wing 4 steps are common to each of the D VD settings. Refer to the specific section f or details. 1 Press SETUP before inserting a disc, or when in stop mode.
34 -EN PARENTAL OFF 87654321 CHANGE PASSWORD SE T UP Setting the TV Screen Use the procedure described below to set the output screen according to the type of TV monitor being used. Setting item: TV SCREEN Setting contents: 16:9 (WIDE) / 4:3 (LB) / 4:3 (PS) •F or some discs, the pictur e may not be set to the selected scr een size.
35 -EN Setting the Digital Output Use the following procedure to set the digital audio signal output from the D V A-9965E. Setting item: DIGIT AL OUT Further setting items: DOLBY D / DTS / MPEG Press 8 or 9 to select your desir ed setting item, then press ENT .
36 -EN 5 Press RETURN repeatedly until the SETUP mode is deactivated. • When settings ar e changed, old settings ar e overwritten. Make a note of the curr ent settings befor e making changes. If the vehicle’ s battery is disconnected, the settings will be clear ed and will r eturn to the factory settings.
37 -EN SETUP Y ou can flexibly customize the unit to suit your own preferences and usage. Choose the SETUP menu from General Setting, T uner Setting, etc., to select your desired setting. Setup Operation The follo wing 4 steps are common to each of the Setup functions.
38 -EN A udio Setting Audio is selected on the setup main menu in step 3. Subwoofer On and Off Setting item: SUBWOOFER Setting contents:ON (Initial setting) / OFF When the subwoofer is on, perform the steps below to adjust the subwoofer output phase and le vel.
39 -EN Display Setting The display is selected on the setup main menu in step 3. Dimmer Control Setting item:DIMMER Setting contents:A UTO (Initial setting) / MANU AL AU TO : When the headlights are turned on, the display decreases the illumination, and the brightness level which is set in “Setting the Display Dimmer” (this page) is set.
40 -EN iPod™ Operation (Optional) When an iPod™ or iPod™ mini is connected to the optional Alpine Interface adapter for iPod™ (KCA-420i), it can be controlled from the D V A-9965E. Howev er, operation from the iPod is disabled. •F or details, r efer to the Owner’ s Manual of the iP od™ Interface adapter (KCA-420i).
41 -EN To search f or a song of the selected album 1 After selecting the album in step 2 * 3 , press the GlideT ouch bar or FUNC. to change to the song search mode of the selected album. 2 Within 10 seconds, select a song by sliding your finger on the GlideT ouch bar to the left or right, then pressing - / J or the GlideT ouch bar .
42 -EN Repeat Play Only Repeat One is av ailable for the iPod. Repeat One: A single song is repeatedly played back. 1 Press FUNC. to activ ate the audio function mode. Source select mode → Audio function mode → Source operation mode → Sour ce select mode 2 Press the GlideT ouch bar under the RPT function in the function guide display .
43 -EN Playing MP3 Files with the CD Changer (Optional) If you connect a changer compatible with MP3, you can play CD- R OMs, CD-Rs, and CD-R Ws containing MP3 files on this unit. 1 Press SOURCE/POWER to switch to the MP3 Changer mode. 2 Press FUNC. to activ ate the direct disc recall mode.
44 -EN Setting the Speakers 1 Check that Defeat mode is off (pa ge 20). 2 Press and hold MENU f or at least 2 seconds. 3 Select the Speaker Select mode by sliding y our finger on the GlideT ouch bar to the left or right. Press the GlideT ouch bar under the Speaker Select mode.
45 -EN 8 Select the Media Xpander mode by sliding y our finger on the GlideT ouch bar to the left or right. Press the GlideT ouch bar under the Media Xpander mode. 9 Select the MX Level b y sliding your finger on the GlideT ouch bar to the left or right.
46 -EN Graphic Equalizer Adjustments The graphic equalizer allows you to modify the sound using 31 bands each for the front (left and right), rear (left and right) and centre speakers. An additional 10 bands are available for the subw oofer . This allows you to customize the sound to suit your taste.
47 -EN Parametric Equalizer Adjustments The frequency bands of the graphic equalizer are f ixed. This makes it v ery dif ficult to correct for undesired peaks and dips at specif ic frequencies. The parametric equalizer’ s centre frequency can be tuned to these specific frequencies.
48 -EN Mixing bass sound to the rear channel (REAR MIX) This function mixes the front channel audio signals to the audio signals output from the rear speakers, improving the sound in the v ehicle’ s rear seat.
49 -EN Adjusting the acoustic image (BI-PHANT OM) In most installations, the centre speaker must be placed directly between the front passenger and driv er . Using this function, the centre channel information is distributed to the left and right speak ers.
50 -EN Using the Pro Logic II Mode Pro Logic processing can be conducted on the music signals recorded on two channels to achie ve Dolby Pro Logic II surround sound. For two-channel Dolby Digital and DTS signals, there is also a “REAR FILL” function for outputting the signals of the front channel to the rear channel.
51 -EN Storing Settings in the Memory Up to 6 settings can be stored on the unit. All settings and adjustments described below are stored in one memory preset. 1 Press MENU . 2 T ouch the GlideT ouch bar , select AP Preset Mode by sliding it to the left or right, then press GlideT ouch bar .
52 -EN DVD/Video CD: • Move to the desired position on the disc. • During playback, press and hold for more than 1 second to forwar d the disc at double speed.
53 -EN 2 Replacing the battery Put the battery in the case with the (+) indication upward as shown in the illustration. • Placing a battery in backwar ds way may cause a malfunction. 3 Closing the cover Slide the cover as illustrated until a click is heard.
54 -EN Dolby Pr o Logic Dolby Pro Logic is the technology used to decode pr ograms encoded in Dolby Surround. Pro logic decoding will pr ovide you with four channels of sound (front left/right, centr e and monaural rear surr ound) from a 2-channel (ster eo) source.
55 -EN List of Language Codes (For details, see page 33.) Language Kirundi Romanian Russian Kinyarwanda Sanskrit Sindhi Sangho Serbo-Croatian Singhalese Slovak Slovenian Samoan Shona Somali Albanian S.
56 -EN List of Country Codes (For details, see page 34.) 7573 7577 7578 7580 7582 7587 7589 7590 7665 7666 7667 7673 7675 7682 7683 7684 7685 7686 7689 7765 7767 7768 7771 7772 7775 7776 7777 7778 777.
57 -EN Pe r u French Polynesia Papua New Guinea Philippines Pakistan Poland Saint Pierre and Miquelon Pitcairn Puerto Rico Portugal Palau Paraguay Qatar Reunion Romania Russian Federation Rwanda Saudi.
58 -EN In Case of Difficulty If you encounter a problem, please turn the power of f, then on again. If the unit is still not functioning normally , please revie w the items in the following checklist. This guide will help you isolate the problem if the unit is at fault.
59 -EN Picture is unclear or noisy . • Disc is being fast-forwarded or fast-re versed. - The picture may be unclear , but this is normal. •V ehicle’ s battery power is weak. - Check the battery power and wiring. (The unit may malfunction if the battery power is under 11 v olts with a load applied.
60 -EN ERROR - 02 •A disc is left inside the CD Changer . - Press the eject button to acti vate the eject function. When the CD Changer finishes the eject function, insert an empty CD magazine into the CD Changer to receiv e the disc left inside the CD Changer .
61 -EN Specifications FM TUNER SECTION T uning Range 87.5 – 108.0 MHz Mono Usable Sensitivity 9.3 dBf (0.8 µV/75 ohms) 50 dB Quieting Sensitivity 13.5 dBf (1.3 µV/75 ohms) Alternate Channel Selectivity 80 dB Signal-to-Noise Ratio 80 dB Stereo Separation 45 dB Capture Ratio 2.
62 -EN Installation and Connections Before installing or connecting the unit, please read the f ollo wing and pages 3 to 4 of this manual thoroughl y f or pr oper use. Wa rning MAKE THE CORRECT CONNECTIONS. F ailure to make the proper connections may result in f ire or product damage.
63 -EN Installation Accessory List • Head unit ........................................................................ 1 • P ower Suppl y box .......................................................... 1 • P ower cable ..........................
64 -EN Installing the P ower Supply Unit Caution Do not block the unit’ s fan or heat sink, thus preventing air circulation. If blocked, heat will accumulate inside the unit and may cause a fire.
65 -EN F/R/Sub-W 3WA Y + - , ) / ~ < < < ; : = > ? 6 4 3 2 1 7 8 5 9 ! " # $ % & ( . : Connections * 1 The label is attached on the bottom of the unit. * 2 Caution about Power cable Use the power cable supplied with the unit. Do not use a power cable that is not supplied with the unit.
66 -EN 1 Antenna Receptacle 2 Pow er Antenna Lead (Blue) Connect this lead to the +B terminal of your power antenna, if applicable. • This lead should be used only for contr olling the vehicle's power antenna. Do not use this lead to turn on an amplifier , or a signal pr ocessor , etc.
67 -EN System Example.
68 -EN To prevent noise/interference in the audio system. • Locate the unit and route the leads at least 10 cm aw ay from the car harness. • K eep the battery po wer leads as far away from other leads as possible. • Connect the ground lead securely to a bare metal spot (remov e any paint, dirt or grease if necessary) of the car chassis.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Alpine DVA-9965E è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Alpine DVA-9965E - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Alpine DVA-9965E imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Alpine DVA-9965E ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Alpine DVA-9965E, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Alpine DVA-9965E.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Alpine DVA-9965E. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Alpine DVA-9965E insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
