Manuale d’uso / di manutenzione del prodotto L655 del fabbricante Toshiba
Vai alla pagina of 171
computers.tosh iba-europe.com User ’ s Manual Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series.
User ’s Manual ii Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series T able of Content s Chapter 1 Getting St arted Equipment ch ecklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Getting S t arted .
User ’s Manual iii Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Chapter 4 Operating Basics Using the T ouch Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Web Camera . . . . . . . . . . . . .
User ’s Manual iv Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Appendix A S pecifications Appendix B Display Controller and Vi deo mode Appendix C Wireless LAN Appendix D Blueto.
User ’s Manual vi Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Copyright © 2010 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA.
User ’s Manual vii Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Memory S tick and Memory S tick PRO are trademarks or registered trademarks of Sony Corporatio n. ConfigFree is a trademark of T oshiba Corporation. Wi-Fi is a registered trade ma rk of the Wi-Fi Alliance.
User ’s Manual viii Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series W orking environm ent This product was designed to fulfil the EMC (Electromag netic Compatibility) requirements to be observed for so-called "Residential, commercial and light industry environments".
User ’s Manual ix Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Following information is only valid for EU-mem ber S t ates: Disposal of product s Disposal of batteries a nd/or accumu lators The crossed out wheeled dust bin symbol indicates tha t products must be collected and disposed of separately from household waste.
User ’s Manual x Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Disposing of the computer and the computer's batteries ■ Discard this compu ter in acco rdance with appli cable laws and regulations. For further information, cont act y our local government.
User ’s Manual xi Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series ENERGY ST AR ® Program GOST Y our computer model may be Energy S t ar ® qualified. If the model you purchased is quali fied, it is labeled with the ENERGY ST AR logo on the computer and the following in formation applies.
User ’s Manual xii Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Optical disc drive safety instructions TEAC DVD Super Multi with Double Layer Recording DV -W28S Be sure to check the precautions at the end of this section. ■ The DVD Super Multi/BD-Combo/BD-Writer drive model employs a laser system.
User ’s Manual xiii Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Panasonic System Netw orks DVD Super Multi UJ890 BD-Combo UJ141 BD-Writer UJ240 HIT ACHI-LG Data S torage, Inc. DVD Super Multi GT30N/GT30F Panasonic System Networks Co.
User ’s Manual xiv Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series TOSHIBA SAMSUNG ST ORAGE TECHNOLOGY DVD Super Multi TS-L633C/TS-L633Y Precautions TOSHIBA SAMSUNG STORAGE TECHNOL.
User ’s Manual xxii Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Preface Congratulations on your purchase of the Satellite L650/L655/L650D /L655D / Satellite Pro L650 /L650D Series compute r .
User ’s Manual xxiii Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Icons Icons identify ports, dials, and other parts of your computer . The indicator pane l also uses ic ons to identify th e component s it is pro viding info rmation on.
User ’s Manual xxiv Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series T erminology This term is defined in this document as follows: Start The word " Sta rt " refers to the " " button in Windows 7.
User ’s Manual xxv Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series General Precautions TOSHIBA computers are designed to optimize safety , minimize strain and withstand the rigors of portability . Ho wever , cert ain precautions should be observed to further reduce the risk of personal injury or damag e to the computer .
User ’s Manual xxvi Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series T o keep your computer in prime operati ng condition, protect your work area from: ■ Dust, moisture, and direct sunlig ht.
User ’s Manual xxvii Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Mobile phones Please be aware that the use of mob ile phones can inte rfere with the aud io system.
User ’s Manual 1-1 Getting S tarted Chapter 1 Getting S t arted This chapter provides an equ ipment checklist, and basic informa tion to start using your computer . Equipment checklist Carefully unpack your comp uter , t aking care to save the box and packaging materials for future use.
User ’s Manual 1-2 Getting S tarted Sof tware The following Wi ndows ® operating system and uti lity sof tware are pre- installed. ■ Windows 7 ■ TOSHIBA V alue Added Package ■ TOSHIBA Recover.
User ’s Manual 1-3 Getting S tarted Connecting the A C adaptor Attach the AC adaptor when you need to cha rge the battery or you want to operate from AC power . It is also th e fastest way to get started, because the battery pack will need to be charged before you can operate from battery power .
User ’s Manual 1-4 Getting S tarted 1. Connect the power cord to the AC adaptor . Connecting the power cord to the AC adaptor (2-pin plug) ■ Always use the TOSHIBA AC adaptor that was included with your computer , or use AC adaptors specifie d by TOSHIBA to avoid any risk of fire or other damage to the co mputer .
User ’s Manual 1-5 Getting S tarted Connecting the power cord to the AC adaptor (3-pin plug) 2. Connect the AC adaptor ’s DC output plug to the DC IN 19V jack on the right side of the computer .
User ’s Manual 1-6 Getting S tarted Opening the disp lay The display panel can be opened to a wide range of angles for optimal viewing. While holding down the palm rest with one hand so that the mai.
User ’s Manual 1-7 Getting S tarted T urning on the power This section describes how to turn on the power - the Power indicator will then indicate the status. Please refer to the Monitoring of power condition section in Chapter 6, Power and Power-Up Modes for more information.
User ’s Manual 1-8 Getting S tarted T urning off the power The power can be turned off in one of three modes, either Shut Down Mode, Hibernation Mode or Sleep Mode.
User ’s Manual 1-9 Getting S tarted Benefits of Sleep Mode The Sleep Mode feature provide s the following benefits: ■ Restores the previous workin g environment more ra pidly than does the Hibernation Mode feature.
User ’s Manual 1-10 Getting S tarted When you turn the power back on, you can continue where you left when you shut down the computer . Sleep Mode limitations Sleep Mode will not function under the following conditions: ■ Power is turned back on immediately after shutting down.
User ’s Manual 1-1 1 Getting S tarted S tarting Hibernation Mode T o enter Hibernation Mode, follow the steps below . 1. Click Start . 2. Point to the arro w icon ( ) and then select Hibernate from the menu.
User ’s Manual 1-12 Getting S tarted System Recovery Options an d Restoring the preinst alled sof twa re About 1.5GB hidden partition is allocat ed on the hard drive for the Syste m Recovery Options. System Recovery O ptions The System Recovery Options feature is installed on the hard di sk when shipped from the factory .
User ’s Manual 1-13 Getting S tarted Creating Optical Reco very Discs This section describes how to create Recovery Discs. A recovery image of the software on your computer i s stored on the hard disk drive, and can be copied to DVD media by using the following steps: 1.
User ’s Manual 1-14 Getting S tarted Restoring the pre-inst alled softw are from your crea ted Recovery Discs If the pre-installed files are damaged , you are able to either use the Recovery Discs you have create d to re store the computer to the state it was in when you originally recei ved it.
User ’s Manual 1-15 Getting S tarted 1. T urn of f your computer . 2. While holding down 0 (zero) key on the keyb oard, turn on your computer . A menu will be displayed from which you should fo llow the on-screen instructions.
User ’s Manual 2-1 The Grand T our Chapter 2 The Grand T our This chapter identifies the vari ous components of the computer - it is recommended that you become familiar with each before you operate th e computer . Front with the display closed The following figure shows the computer ’s front with it s display panel in the closed position.
User ’s Manual 2-2 The Grand T our Lef t side The following figure shows the comp uter ’s left side. The left side of the computer * Provided with some models. 1. Security lock slot 6. LAN jack 2. Modem jack* 7. eSA T A/USB combo port 3. Cooling vents 8.
User ’s Manual 2-3 The Grand T our External monitor port This port provides 15-pin, analo g VGA port. This port allows you to connect a n external monitor to the computer . HDMI out port HDMI out port can connect with T ype A connector HDMI cable . HDMI cable can send video a nd audio signals.
User ’s Manual 2-4 The Grand T our Right side The following figure shows the comp uter ’s right side. The right side of the computer * Provided with some models. 1. Bridge media slot 3. Optical di sc drive 2. Universal Serial Bus (USB 2.0) port s 4.
User ’s Manual 2-5 The Grand T our Back The following figure shows the comp uter ’s back. The back of the computer DC IN 19V jack The AC adaptor connects to this jack in order to power the computer a nd charge its internal batteries.
User ’s Manual 2-6 The Grand T our Underside The following figure shows the undersi de of the computer . Y ou shou ld ensure that the disp lay is closed befo re the computer is turned over to avoid causing any damage. The underside of the computer 1.
User ’s Manual 2-7 The Grand T our Front with the display op en This section shows the computer with the display panel open. In order to open the display , lift the display panel up and position it at a comfortable viewing angle for you. The front of the computer with the display panel open * Provided with some models.
User ’s Manual 2-8 The Grand T our Web Ca me r a Web Ca me ra is a device that allows you to record video or take photographs with your computer . Y o u can use it for video chatting or video conferences using a communicatio n tool such as Windows Live Messeng er .
User ’s Manual 2-9 The Grand T our Indicators This section explains ind icator functions. System indica tors LED system indicators next to their resp ective icons, glow when specific computer operations are in progress. System indicators T ouch Pad The T ouch Pad l ocated in the palm rest is used to control the movement of the on-screen pointer .
User ’s Manual 2-10 The Grand T our Keyboard indicators The following figures show the position s of the CAPS LOCK indicator and the NUM LOCK indicator which show the following conditi ons: ■ When the CAPS LOCK indicator glows, the keyboard will produce capitals when any letter is typed.
User ’s Manual 2-1 1 The Grand T our Optical disc drives The computer may b e installed with a DVD Super Multi, BD-Combo or BD- Writer drive. A Serial A T A interface controller is used for optical disc operation. When the computer is accessi ng a optical disc, an indicator on the drive glows.
User ’s Manual 2-12 The Grand T our W rit able discs This section describes the types of writ able CD/DVD/BD discs. Check the specifications of your d rive to see the types of discs it can write. Use TOSH IBA Disc Creator and Corel DVD Movi eFactory to writ e comp act discs.
User ’s Manual 2-13 The Grand T our BD-W riter drive The full-size BD-Writer drive mo dule lets you record data to rewritable CD/DVD/BDs as well as run either 12 cm (4.
User ’s Manual 2-14 The Grand T our DVD Supe r Multi drive The full-size DVD Super Multi drive module lets you record data to rewritable CD/DVDs as well as run ei ther 12 cm (4.
User ’s Manual 2-15 The Grand T our The AC adaptor (3-pin plug) ■ Depending on the mo del in question, either a 2-pin or 3-pin adaptor/power lead will be bundled with the computer.
User ’s Manual 3-1 Hardware, Utilities and Options Chapter 3 Hardware, Utilities and Options Hardware This section describes the hardware of your computer . The actual specifications may vary depending on the model you purchased. Processor Memory CPU Processor type varies depen ding on the model.
User ’s Manual 3-2 Hardware, Utilities and Options Power Video RAM The memory in a computer's graphics adaptor , used to store the image displayed on a bitmap display . The amount of Vide o RAM avail able is dependent on the computer's system me mory .
User ’s Manual 3-3 Hardware, Utilities and Options Disks Optical disc drive AC adaptor The AC adaptor provides power to the system and recharges th e batteries when they are low . It comes with a detachable power cord which will either have a 2-pin or 3-pin plug encl osure.
User ’s Manual 3-4 Hardware, Utilities and Options Display The computer's internal disp lay panel supports high-resolution video graphics and can b e set to a wide range of viewing angl es for maximum comfort and readability .
User ’s Manual 3-5 Hardware, Utilities and Options T o access this center , go to: Star t All Programs Catalyst Control Center CCC - Advanced In this control center: 1. Click Graphics at the upper left, and then select PowerPlay™ . from the drop-down menu.
User ’s Manual 3-6 Hardware, Utilities and Options Communications Sp ecial features The following features are eithe r un ique to TOSHIBA computers or are advanced features which ma ke the computer more con venient to use. Access each function using the following proce dures.
User ’s Manual 3-7 Hardware, Utilities and Options HDD automatic power off *1 This feat ure automa tically cut s of f power to the hard disk drive when it is not acce ssed for a specified time, with pow er being restored when the hard disk drive is next accessed.
User ’s Manual 3-8 Hardware, Utilities and Options Heat dispersal *1 T o protect against overhea ting, the processor has an internal temperature sensor so that, if the computer's internal temperature rises to a certain level, the cooling fan is turned on o r the processing speed is lowered.
User ’s Manual 3-9 Hardware, Utilities and Options Utilities and Applications This section describes the pre-installed uti lities that come with the computer and details how to start them. For further information on their operation, you may refer to each utili ty's online manua l, help files or README.
User ’s Manual 3-10 Hardware, Utilities and Options Bluetooth S t ack for Window s by T oshiba This software enables communication betwee n the computer and external Bluetooth devices such as printers and mobile phones. Bluetooth functions cannot be used in models that do not h ave a Bluetooth module installed.
User ’s Manual 3-1 1 Hardware, Utilities and Options TOSHIBA Service Statio n This application allows yo ur computer to automatically search for TOSHIBA sof tware updates or other alerts from TOSHIBA that are specific to your computer system and it s programs.
User ’s Manual 3-12 Hardware, Utilities and Options Optional devices Optional devi ces can exp and the com puter's ca pabiliti es and its versati lity .
User ’s Manual 3-13 Hardware, Utilities and Options Examples of memory media Memory media This section provides the important safety precautions in order to handle your memory media.
User ’s Manual 3-14 Hardware, Utilities and Options ■ SD, SDHC and SDXC memory cards appear the same externally . However , the logo on SD, SDHC and SDXC memory cards is different, so pay careful attention to the logo when purchasing. ■ The maximum capacity of SD memo ry cards is 2GB.
User ’s Manual 3-15 Hardware, Utilities and Options ■ The card is designed so that it can be inserte d only one way . Do not try to force the card int o the slot. ■ Do not leave a card partially inserted in the slot. Press the card until you hear it click into place.
User ’s Manual 3-16 Hardware, Utilities and Options Inserting a memory media Remo vin g a me mor y med ia The following instru ctions apply to all types of supported media device s. T o remove a memory media, follow the steps as detailed below: 1. Open the Safely Remove Hard ware and Eject Media icon on the Windows T askb ar .
User ’s Manual 3-17 Hardware, Utilities and Options Removing memory media Additional mem ory modu le Y ou can install additional memory into the computer in order to increase the amount of system memory that is avai lable. This section describes how to install and remove optional memory modules.
User ’s Manual 3-18 Hardware, Utilities and Options Installing a memory module T o install a memory module, follow the steps as detailed below: 1. Shut down the compu ter - make su re the Power indicator is off (refer to the T urning off the pow er section in Chapter 1, Getting Started if required).
User ’s Manual 3-19 Hardware, Utilities and Options 6. Slide your fingernail or a thin object under the cover and lift it off. Removing the memory module cover 7.
User ’s Manual 3-20 Hardware, Utilities and Options 8. Seat the memory module cover in place and secure it with the screws. Seating the memory module cover 9. Install the battery pa ck - refer to Replacing the battery pack section in Chapter 6, Power and Power-Up Modes , if requ ired.
User ’s Manual 3-21 Hardware, Utilities and Options 7. Push the latches away from the module in order to release it - a spring will force one end of the modul e up at an angle. 8. Grasp the module by its edges and remove it from the computer . Removing the memory module 9.
User ’s Manual 3-22 Hardware, Utilities and Options External monitor An external analog monitor can be connected to the external mo nitor port on the computer . T o connect a monitor , follow the steps as detailed below: Connecting the monitor cable 1.
User ’s Manual 3-23 Hardware, Utilities and Options eSA T A (External Serial A T A) An device corresponding to eSA T A function can be connected to the eSA T A/USB combo port on th e computer . Connecting the eSA T A device T o connect an eSA T A device, fol low the steps as detailed below: 1.
User ’s Manual 3-24 Hardware, Utilities and Options 2. Click the Safely Remove Hardwa re and Eject Media icon on the Windows T askb ar . 3. Click an eSA T A device that yo u want to remove. 4. Carefully pull an eSA T A device's eSA T A/USB combo conne ctor out from within the computer's eSA T A/USB combo po rt.
User ’s Manual 3-25 Hardware, Utilities and Options Settings for disp lay video on HDMI T o view video on the HDMI device, be sure to config ure the following settings otherwise you may find that nothing is displayed. Select HD Format T o select the display mode, follow the steps as detailed below: 1.
User ’s Manual 3-26 Hardware, Utilities and Options Security lock A security locks enable you to ancho r your computer a desk or other heavy object in order to help prevent unautho rized removal or theft.
User ’s Manual 3-27 Hardware, Utilities and Options Optional accessories Y ou are able to add a number of options and accessor ies in order to make your computer even more powerful and convenient to use .
User ’s Manual 4-1 Operating Basics Chapter 4 Operating Basics This chapter describes the basic operations of your computer , highlights the precautions that should be taken when using it. Using the T ouch Pad T o use the T ouch Pa d, simply touch and move your fingerti p across it in the direction you want the on-screen pointer to go.
User ’s Manual 4-2 Operating Basics T ouch Pad Gestu re There are four convenient gestures th at make u sers operate the system easier and faster . In the Mouse Prop erties you can enable/disable these functions. ChiralMotion Y ou can scroll vertica lly and horizontal ly .
User ’s Manual 4-3 Operating Basics Momentum The Momentum feature del ivers smooth, fa st, trackball-l ike mouse movement. One quick flick of the finge r on the T ouchPad surface can mo ve the cursor across the entire comput er scree n.
User ’s Manual 4-4 Operating Basics Using the T OSHIBA Face Recognition TOSHIBA Face Recognition uses a face verificati on library to verify the face data of users when they log in to Windows. The user can thus avoid having to enter a password or the like, which makes the login process easier .
User ’s Manual 4-5 Operating Basics Disclaimer T oshiba does not guarantee that the face recogni tion utility technology will be completely secure or error-free. T oshiba does not guarantee that the face recognition utility will accurately screen out unauthorized users at all times.
User ’s Manual 4-6 Operating Basics 7. Perform the verifica tion test. Face the screen as you do w hen you register . ■ If verification fails, click the Back button and re-register . Please refer to step 6 from step 4. 8. If verification is successful, click the Next button and register an account.
User ’s Manual 4-7 Operating Basics 1:N Mode Login screen 1. T u rn on the comput er . 2. The Select Tiles screen will be displaye d. 3. Select St art face recognition () . 4. " Please face the camera " will be displayed. 5. V erification will be performed.
User ’s Manual 4-8 Operating Basics Loading discs T o load a disc, follow the steps as detailed below: 1. When the computer ’s power is on, press the eject button to open the disc tray slightly . 2. Grasp the disc tray gently and pull until it is fully op ened.
User ’s Manual 4-9 Operating Basics 4. Press gently at the center of the disc until you feel it click into place. T he disc should li e below the top of the spindle, flu sh with the spindl e base. 5. Push the center of the disc tray to close it. Press gently until it locks into place.
User ’s Manual 4-10 Operating Basics Removing a disc 3. Push the center of the disc tray to close it. Press gently until it locks into place. How to rem ove discs w hen the disc tray will not op en Pressing the eject button will not open the disc tray when the computer power is off.
User ’s Manual 4-1 1 Operating Basics W riti ng CD/DVD/BDs Y ou can use the BD-Combo/BD-W riter dr ive to write dat a to either CD-R, CD-RW , DVD-R, DVD-R (Dual Layer), DVD-RW , DVD+R, DVD+R (Doub le Layer), DVD+RW , DVD-RAM, BD-R, BD -R (Dual Layer), BD-RE or BD-RE (Dual Layer) discs.
User ’s Manual 4-12 Operating Basics Disclaimer TOSHIBA does not bear responsibility for the following: ■ Damage to any CD-R, CD -RW , DVD-R, DVD-R (D ual Layer), DVD-RW , DVD+R, DVD+R (Double Layer), DVD+RW , DVD-RAM, BD-R , BD-R (Dual Layer), BD-RE or BD-RE (Dual Layer) disc that may be caused by writing or rewriting with this product.
User ’s Manual 4-13 Operating Basics Before writing or rewriting with the DVD S uper Mu lti drive ■ Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of.
User ’s Manual 4-14 Operating Basics ■ If the disc is poor in quality , or is dirty or damaged, wr i ting or rewriting errors may be noted - ensure that you check a ll discs for dirt or damage before you use them. CD-RW : (Ultra-S peed) MITSUBISHI KAGAKU MEDIA CO.
User ’s Manual 4-15 Operating Basics ■ The actual number of rewrites to CD-RW , DVD-RW , DVD+R W , DVD- RAM or BD-RE media will be affected by the quality of the disc itself and the way in which it is used. ■ There are two types of DVD-R media available, au thoring discs and general use discs.
User ’s Manual 4-16 Operating Basics ■ CD-RW (Ultra S peed +) media shoul d not be used as data may be lost or damaged. ■ Y o u should always write from the com puter's hard disk drive onto the CD/DVD - do not try to write from sh ared devices such a s a server or any other network device.
User ’s Manual 4-17 Operating Basics TOSHIBA Disc Creator Please be aware o f the follow ing limitations when you use the TOSHIBA Disc Creator: ■ DVD Video cannot be created using TOSHIBA Disc Creator . ■ DVD Audio cannot be created using TOSHIBA Disc Creator .
User ’s Manual 4-18 Operating Basics Data V erification T o verify that data has been written or rewritten correctly to a data CD/DVD you should follow the steps below before you begin the write/rewri te process: 1.
User ’s Manual 4-19 Operating Basics 5. After choosing the menu template, click the Nex t button to go to the Burning Page . 6. Choose the output type and then click the Burn bu tton. How to learn more about Corel DVD MovieFactory Please refer to the Help and Ma nual files for additional Corel DVD MovieFactory information.
User ’s Manual 4-20 Operating Basics ■ Operate the computer for any other function, including using a mouse or T ouch Pad, or closing/openin g the display panel. ■ Bump or cause vibration to the computer. ■ Use the Mode control button and Audio/Video control button to reproduce music or voice.
User ’s Manual 4-21 Operating Basics ■ WinDVD BD for TOSHIBA supports AACS (Advanced Accesss Control System) copy protection technolog y . Renewal of the AACS key integrated into this product is required for uninterrupted enjo yment of Blu-ray Disc.
User ’s Manual 4-22 Operating Basics Operating W inDVD B D for T OS HIBA Notes on Using WinDVD BD for T OSHIBA. 1. Screen display and available features may vary a mongst BD Videos and scenes.
User ’s Manual 4-23 Operating Basics Sound System This section describes some of the audio control functions. Adjusting System V olume Y ou can control th e overall level of so und using Windows V olume Mixer . T o launch V olume Mixer , follow the steps below .
User ’s Manual 4-24 Operating Basics Opening SmartAudio Help Click " ? " in the top right corner of t he SmartAudio window will ope n the Help file in your sele cted language, or in English i f your selected lan guage is not supported.
User ’s Manual 4-25 Operating Basics Notes on Using the M icrophone Y ou can use the b uilt-in or an external mi crophone that co nnects to the microphone jack to record monaural sounds into your appl ications.
User ’s Manual 4-26 Operating Basics Wireless LAN The Wireless LAN is compatible wit h other LAN systems based on Direct Sequence S pread S pectru m/Orthogonal Frequency Division Multiplexing radio technology that complies with the IEEE802.1 1 Wireless LAN standard.
User ’s Manual 4-27 Operating Basics Bluetooth wireless te chnology Bluetooth wireless technology el iminates the need for cables, such as desktop computers, between your PC and other electronic devices, example of printers and mobile phones.
User ’s Manual 4-28 Operating Basics Release Notes related to th e Bluetooth S tack for W indows by TOSHIBA 1. Fax application software: Please be aware that there is some fax application software that you cannot use on this Bluetoo th S t ack. 2. Multi-us er considerat ions: The use of Bluetooth is not supported in a multi-user environment.
User ’s Manual 4-29 Operating Basics LAN The computer has built-in suppo rt for Ethernet LAN (10 megabits per second, 10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX) and Gigabit Ethernet LA N (1000 megabits per second, 1000BASE-T).
User ’s Manual 4-30 Operating Basics Connecting the LAN cable T o connect the LAN cable, foll ow th e steps as detailed below: 1. T urn off the power to the computer and to all external devices connected to the computer . 2. Plug one end of the cable into t he LAN jack.
User ’s Manual 4-31 Operating Basics Computer Ha ndling This section explains computer han dling and maintenance. Cleaning the compu ter T o help ensure long, troub le-free oper ation, keep the computer free o f dust and dirt, and u se care with a ll liquids arou nd it.
User ’s Manual 4-32 Operating Basics Heat dispersal T o protect against overheating, the processor is equipped with an internal temperature sensor which activates a co oling fan or lowers the processin g speed if the computer's internal temper ature rises t o a cert ain le vel.
User ’s Manual 5-1 The Keyboard Chapter 5 The Keyboard The computer ’s keyboard layouts ar e compatible with a 104/105-key enhanced keyboard - by pressing some keys in combination, all of the 104/105-key enhance d keyboard functions can be performed on the computer .
User ’s Manual 5-2 The Keyboard Function keys: F1 … F9 The function keys (not to be confused with the special FN key) are the twelve keys at the top of your key board - these keys function differentl y from other keys.
User ’s Manual 5-3 The Keyboard Hot keys Hot keys (pressing FN + a functi on or ESC key) let you enable or disable certain features of the computer . Mute: Pressing FN + ESC turns the volume on and off. Lock: Pressing FN + F1 enters ''Lock computer mo de''.
User ’s Manual 5-4 The Keyboard Brightness Up: Pressing FN + F7 increases the computer's display panel brightness in individual steps. Wireless: Pressing FN + F8 switches the active wireless devices. T ouch Pad: Pre ssing FN + F9 enables o r disables the T ouch Pad function.
User ’s Manual 5-5 The Keyboard FN S ticky key Y ou can use the TOSHIBA Accessi bility Utility to make the FN key sticky , that is, you can press it once, release it, and then pres s an " F Number " key . T o start the TOSHIBA Accessibility utility , click Star t All Programs TOSHIBA Utilities Accessibility .
User ’s Manual 6-1 Power and Power-Up Modes Chapter 6 Power and Power-Up Modes The computer's powe r resources include the AC adaptor , battery pack and any internal batteries.
User ’s Manual 6-2 Power and Power-Up Modes T able 6-1 Power conditions Monitoring of power condition As shown in the below table, the Battery , DC IN and Power indicators on the system indicator alert you to the computer ’s operating capability and battery charge status.
User ’s Manual 6-3 Power and Power-Up Modes DC IN indicator Check the DC IN indicator to determine t he power status with the AC adaptor connected - the follow ing indi cator conditions shou ld be n.
User ’s Manual 6-4 Power and Power-Up Modes Real Time Clock (RTC) battery The Real Time Clock (RTC) battery provides power fo r the internal real time clock and calendar function and also main tains the system configuration while the computer is turned off.
User ’s Manual 6-5 Power and Power-Up Modes Charging the batteries When the power in the battery pack becomes low , the Battery indicator will flash amber to indicate that only a fe w minutes of battery power remain.
User ’s Manual 6-6 Power and Power-Up Modes Tim e Refer to User Information Guide about Char ging time. Battery charging notice The battery may not begin charging immediately under the following conditions: ■ The battery is extremely hot or cold (if the battery is extremely hot, it might not charge at all).
User ’s Manual 6-7 Power and Power-Up Modes Maximizing battery op erating time A battery's usefulness depends on how long it can su pply power on a single charge, while how long the c harg e la.
User ’s Manual 6-8 Power and Power-Up Modes ■ If you have extra battery p acks, rotate their use. ■ If you will not be using the system for an extended period, for example for more than one month, remove th e battery pack from the computer . ■ S tore spare battery pa cks in a cool dry place out of direct sunlight.
User ’s Manual 6-9 Power and Power-Up Modes Releasing the battery pack Installing the battery pack T o install a battery pack, follow the steps as det ailed below: 1. Insert the battery pack as far as it will go into the computer . 2. Ensure that the battery pack is securely in place and the battery lock is in its lock ( ) position.
User ’s Manual 6-10 Power and Power-Up Modes Password Utility The password utility allows you to mainta in an addi tional level of security and provides two levels of password security: User and Supervisor .
User ’s Manual 6-1 1 Power and Power-Up Modes 3. Press ENTER . Power-up modes The computer has three differ ent power-up modes as follows: ■ Shut Down Mode: T he computer will s hut d own without saving data - in view of this you must always save your work before you turn the computer of f.
User ’s Manual 7-1 HW Setu p Chapter 7 HW Setup This chapter explains how to use the TOSHIBA HW Setup program to configure your computer , and provides information on settings for various functions. Accessing HW Set up T o run the HW Setup progra m, click Star t All Program s TOSH IB A Utilities HWSetup .
User ’s Manual 7-2 HW Setu p Password This option allows you to set or reset the user password for power on. User Password Lets you register a new password or change/remove an existing password. T o enter a user password: 1. Select Registered to displa y the following prompt: Enter Password: Enter a password of up to 10 characters.
User ’s Manual 7-3 HW Setu p Display This tab lets you customize your computer’s display settings for either the internal display or an external monitor . Power On Display This tab allows you to select the display to be used when the computer is started.
User ’s Manual 7-4 HW Setu p Y ou can override the setti ngs and manually sel ect a boot device by pressing one of the following keys while the compute r is booting: * In this computer , CD-ROM refers to the DVD Super Multi driver , BD-Combo drive or BD-Writer drive.
User ’s Manual 7-5 HW Setu p LAN Wake-up on LAN This feature lets the comp uter's power be turned on from shutdown when it receives a wake-up p acket (Magic p acket) from the LAN. Power will be automatically turn ed on when a signal is received from an administrator's computer whic h is connected via a network.
User ’s Manual 7-6 HW Setu p SA T A eSA T A This feature a llows you to set conditions for SA T A. SA T A Interface setting This feature allo ws you to set SA T A interface setting. Enabled Enables the eSA T A port. (Default) Disabled Disables th e eSA T A port in order to save power .
User ’s Manual 8-1 T roubleshooting Chapter 8 T roubleshooting TOSHIBA have designed this computer for durability , however , should problems occur you are able to use the procedures detailed in this chapter to help determi ne the cause.
User ’s Manual 8-2 T roubleshooting ■ Make sure all optional accessories are configured properly in the computer's setup program and tha t all required driver software has been loaded (please refer to the documentation included with th e optional accessories fo r further information on its inst allation and configuration).
User ’s Manual 8-3 T roubleshooting Hardware and system checklist This section discusses problems ca used by your computer ’s hardware or attached peripherals. Basic problems may oc cur in the following areas: Sof tware The problems may be caused by your software or disk.
User ’s Manual 8-4 T roubleshooting System start- up When the computer does not start pr operly , check the following items: ■ Self T est ■ Power Sources ■ Power-on Password Self test While booting up the computer , self te st is executed aut omatical ly and the TOSHIBA logo is displayed on the screen.
User ’s Manual 8-5 T roubleshooting AC power If you have trouble turning on the comp u ter with the AC adaptor connected you should check the status of the DC IN indicator . Please refer to Chapter 6, Power an d Power-Up Modes for further information.
User ’s Manual 8-6 T roubleshooting Check whether the battery is hot or cold to the touch - if so, it will not charge properly and should be allowed to reach room temperature before you try again.
User ’s Manual 8-7 T roubleshooting Real Time Clock Keyboard Keyboard problems can be caused by the setup and conf iguratio n of the computer - please refer to Chapter 5, The Keyboard for further information.
User ’s Manual 8-8 T roubleshooting Hard disk drive Markings appear on the computer's display panel. These marks may have co me from contact with the keyboard and T ouch Pad whi le the display panel has been closed.
User ’s Manual 8-9 T roubleshooting DVD Supe r Multi drive For more inform ation, refer to Chapter 4, Operating Basics . BD drive For more inform ation, refer to Chapter 4, Operating Basics . Problem Procedure Y o u cannot access a CD/DVD in the drive Make sure the drive’ s disc tray is securely closed.
User ’s Manual 8-10 T roubleshooting Open the disc tray and make sure the CD/DVD/BD is properly se ated. It sh ould lie flat with the label facin g up. A foreign object in the disc tray cou ld block laser light from reading the CD/DVD/BD. Make sure there is no obstruction.
User ’s Manual 8-1 1 T roubleshooting Memory Cards: SD/SDHC/SDXC Card , Memory Stick/Memory Stick PRO, MultiM ediaCard For further information, please refer to Chapter 3, Hardware, Utilities and Options .
User ’s Manual 8-12 T roubleshooting Pointing device If you are using a USB mouse, you should also refer to both the USB device section in this chapter , and the documentation supplied with your mouse. T ouch Pad Problem Procedure The T ouch Pa d does not wor k.
User ’s Manual 8-13 T roubleshooting USB mouse The reacti on of T ouch pad is either too sensitive or not sensitive enough. Adjust the touch Sensitivity . 1. Click Star t Control Panel .Se lect Large icons or Small icons in Vie w b y , and then click Mouse .
User ’s Manual 8-14 T roubleshooting USB device In addition to the information in this section, p lease also refer to the documentation supplied with yo ur USB device. The on-screen pointer moves too fast or too slow In this instance, you should initially try changing the speed setting withi n t he Mouse Control utility .
User ’s Manual 8-15 T roubleshooting eSA T A device In addition to the information in this section, p lease also refer to the documentation supplied with your e SA T A device. Sound system In addition to the information in this section, p lease also refer to the documentation supplied with your a udio device.
User ’s Manual 8-16 T roubleshooting External monitor Please also refer to Chapter 3, Hardware, Utilities and Options , and to the documentation supplied with your monitor for further information.
User ’s Manual 8-17 T roubleshooting LAN Wireless LAN If the following procedures do not re store LAN access, consult your LAN administrator . For more information on wireless communication, refer to Chapter 4, Operating Basics . Display error occurs Check th at the cable connecting the external monitor to the computer is firmly attached.
User ’s Manual 8-18 T roubleshooting Bluetooth For further information on Bluetooth wire less communication, please refer to Chapter 4, Operating Basics .
User ’s Manual A-1 S pecifications Appendix A S pecifications This appendix summarizes the computer ’s technical specifications. Environmental Requirements Power Requirements Conditio ns Ambient t.
User ’s Manual B-1 Display Controller and Video mode Appendix B Display Controller and V ideo mode Display controller The display controller in terprets software commands into hardware commands that turn particular parts on the screen on or of f.
User ’s Manual C-1 Wireless LAN Appendix C Wireless LAN This appendix is intended to hel p you get your Wireless LAN network up and running, with a mi nimum of parameters.
User ’s Manual C-2 Wireless LAN The range of the wireless signal is relate d to the transmit rate of the wireless communication. Communications at lower transmit range may travel large r dist ances. ■ The range of your w ireless devices can be affected when the antennas are placed near metal surfaces and solid h igh-density materials.
User ’s Manual C-3 Wireless LAN ■ For wireless clients that operate in a Wireless LAN Infrastructure, the Wireless LAN module will automatically start operation at the ch annel identified by the Wireless LAN Ac cess Point. When roamin g between different access points the station can dynamically switch to another channel if requ ired.
User ’s Manual C-4 Wireless LAN *1 Factory-set default channels *2 The channel which can be used depends on th e installed wireless LAN module. And the approved channels o n using are different at ea ch country or region.
User ’s Manual D-1 Bluetooth wireless technology Interoperability Appendix D Bluetooth wireless technology Interoperability Bluetooth Adaptor from TOSHIBA ar e designed to be interoperable with any .
User ’s Manual D-2 Bluetooth wireless technology Interoperability Bluetooth w ireless techno lo gy and your Health The products with Bluetooth wireless te chnology , like other radio devices, emit radio frequency electromagnetic energy .
User ’s Manual E-1 AC Power Cord and Connectors Appendix E AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used.
User ’s Manual E-2 AC Power Cord and Connectors For the United S tates and Canada, two pin plug configuration must be a 2-15P (250V) or 1-15P (125V) and three p in plug configuration must be 6-15P (250V) or 5-15P (125V) as design ated in the U.S. Nati onal Electrical code handbook and the Canadian Electrical Co de Part II.
User ’s Manual F-1 TOSHIBA PC Health Monitor Appendix F T OSHIBA PC Health Monitor The TOSHIBA PC Health Monitor application proactively monitors a number of system functions such as power consumption, battery health and the system cooling, in forming you of significant system conditions.
User ’s Manual F-2 TOSHIBA PC Health Monitor St arting the TOSHIBA PC Health Mo nitor The TOSHIBA PC Health Monitor can be started using the following methods: ■ Click Start All Programs TO SH IB A Utilities PC Health Monitor . ■ Click the icon ( ) in the notif ication area, then cli ck the " Enable PC Health Monitor.
User ’s Manual G-1 Legal Footnotes Appendix G Legal Footnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. Non-applicable Icons Certain computer chassis are design ed to accommodate all possible configurations for an entire product se ries.
User ’s Manual G-2 Legal Footnotes Under some conditions, your computer product may automatically shut- down. This is a normal protective feat ure designed to reduce the risk of lost data or damage to the product when used outside recommended conditions.
User ’s Manual G-3 Legal Footnotes Hard Disk Dri ve (HDD) Cap acity One Gigabyte (GB) means 10 9 = 1,000,0 00,000 bytes using powers of 10. The computer operating system, howe ver , reports storage capacity using powers of 2 for the definition of 1 GB = 2 30 = 1,073,741,824 bytes, and therefore shows less storage capacity .
User ’s Manual H-1 Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series Appendix H If your computer is stolen Should your comput er be stolen , however , we’ll help you try to find it.
User ’s Manual H-2 Satellite L650/L655/L650D/L655D / Satellite Pro L650/L650D Series TOSHIBA Theft Registration Send to: TOSHIBA Europe GmbH T echnical Servi ce and Support Blumenstrasse 26 93055 Regensburg Germany Fax number: +49 (0) 941 7807 921 Owner ’s d etai ls Country stolen: Machine type: (e.
User ’s Manual Glossa ry-1 Glossary Glossary The terms in this glossary cover topi cs related to this manual. Alternate naming is included for reference.
User ’s Manual Glossa ry-2 Glossary FDD: floppy d iskette drive FIR: fast infrared GB: gigabyte HDD: hard disk drive HDMI: High-Definition Multimedia Interface IDE: integr ated dri ve elect ronics I.
User ’s Manual Index-1 Index Index A AC adaptor 3-3 additional 3-27 connecting 1-3 DC IN 19V jack 2-5 ASCII characters 5-5 B Battery charging 6-5 extending life 6-7 indicator 2-9, 6-2 monitoring cap.
User ’s Manual Index-2 Index F FN + 1 (TOSHIBA Zooming Utility reduce) 5-4 FN + 2 (TOSHIBA Zooming Utility enlarge) 5-4 FN + ESC (Mute) 5-3 FN + F1 (Lock) 5-3 FN + F2 (Power Plan ) 5-3 FN + F3 (Slee.
User ’s Manual Index-3 Index Modem jack 2-2 Moving the comput er 4-31 MultiMediaCard 3-13 P Password power on 3-7 Starting the computer by 6- 10 Pointing Device Touch Pad 8-12 Power conditions 6-1 H.
User ’s Manual Index-4 Index W Web Camera 2-8, 3-5, 4-3 Video mode B-1 Video RAM 3-2 Wireless communication 4-25 indicator 2-10, 4-28 Wireless LAN 3-6, 4-26 problems 8-17 USB device problems 8-14 Us.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Toshiba L655 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Toshiba L655 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Toshiba L655 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Toshiba L655 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Toshiba L655, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Toshiba L655.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Toshiba L655. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Toshiba L655 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
