Manuale d’uso / di manutenzione del prodotto A215 del fabbricante Toshiba
Vai alla pagina of 244
GMAD00132010 05/07 If you need assistance: ❖ T oshiba’ s Support W eb site pcsupport.toshiba.com ❖ T oshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see “If Someth ing Goes W rong” on page 173 in this gui de.
2 5.375 x 8.375 ver 2.3 Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
3 5.375 x 8.375 ver 2.3 Critical Applications The computer you have pu rchased is not designed for an y “critical applications.” “Critical applications” means life s upport systems, medical ap.
4 5.375 x 8.375 ver 2.3 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: ❖ This device may not cause harmful interference. ❖ This device must accept any interferen ce received, including interference that may cause undesired operatio n.
5 5.375 x 8.375 ver 2.3 Connection to party line service is subject to state tarif fs. Contact the state public utility commission, public se rvice co mmission or corporation commission for information. T elephone Company Procedures The goal of the telephone company is to provi de you with the best service it can.
6 5.375 x 8.375 ver 2.3 Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disabl e your alarm equipment. If you have questions abou t what will disable alarm equipment, consult your telephone compan y or a qualified installer .
7 5.375 x 8.375 ver 2.3 Wireless Interoperability The TOSHIBA W ireless LAN Mini PCI Card products are designed to be interoperable with any wir eless LAN product that is based on Direct Sequen ce Spread Spectrum (DSSS) radio t echnology , and is compliant to: ❖ The IEEE 802.
8 5.375 x 8.375 ver 2.3 In some situations or en vironments, the use of W ireless LAN may be restricted by the proprietor of the b uilding or responsi ble representatives of the organization.
9 5.375 x 8.375 ver 2.3 The term “IC” before the equipment certif ication number only signifies that the Industry Canada technical specifications were met. T o prevent radio interference to the license d service, this device is intended to be operated indoors and away fr om windows to provide maximum shieldin g.
10 5.375 x 8.375 ver 2.3 Modem W arning Notice Conformity Statement The equipment has been approved to [Commission Decision “CTR21”] for pan- European single terminal connecti on to the Public Switched T elephone Network (PSTN).
11 5.375 x 8.375 ver 2.3 1. Sticker Please put the following sticker on de vices incorporatin g this product. 2. Indication The indication shown below ap pears on this equipment. 1 2.4: This equipment uses a frequency of 2.4 GHz. 2 DS: This equipment uses DS-SS modulation.
12 5.375 x 8.375 ver 2.3 JAP AN APPROV ALS INSTITU TE FOR TELECOMMUNICA TIONS EQUIPMENT Approval Nu mber: D01-1128JP TELECOM ENGINEERING CENTER Ap proval Number: 03NY .A0018, 03GZDA0017 The following rest rictions apply: ❖ Do not disassemble or modify the device.
13 5.375 x 8.375 ver 2.3 Europe - Restrictions for us e of 2.4 GHz Frequencies in European Community Countries België/ Belgique: For private usage outside buildi ngs across public grounds ov er less than 300m no special registration with IBP T/BIP T is required.
14 5.375 x 8.375 ver 2.3 802.1 1a (5 GHz) T urbo Mode (5 GHz) Europe - Restrictions for Use of 5 GHz Frequencies in European Community Countries O: allowed x: forbidden ❖ T o remain in conformance with European spectrum usage laws for W ireless LAN operation, the above 2.
15 5.375 x 8.375 ver 2.3 ❖ This device must not be operated in ad-hoc mode using channels in the 5 GHz bands in the Europ ean Community . Ad-hoc mode provides a direct communication between two client devices without a W ireless LAN Access Point.
16 5.375 x 8.375 ver 2.3 802.1 1a (5 GHz) T urbo Mode (5 GHz) Approved Countries/Regions for use for the Intel ® PRO/Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table.
17 5.375 x 8.375 ver 2.3 Approved Countries/Regions for use for the T oshiba Mini PCI Wireless LAN Card This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table.
18 5.375 x 8.375 ver 2.3 802.1 1a (5 GHz) Approved Countries/Regions for the Intel ® Wireless Wi-Fi ® Link 4965AGN This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in th e countries/regions in the follow ing table.
19 5.375 x 8.375 ver 2.3 Bluetooth ® Wireless T echnolo gy Interoperability Bluetooth ® Cards from TOSHIBA are designed to be interoperable with an y product with Bluetooth wireless technology that .
20 5.375 x 8.375 ver 2.3 Approved Countries/Regions for use ( Bluetooth ® wireless technology) Bluetooth ® Card from T oshiba equipment is appr oved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table.
21 5.375 x 8.375 ver 2.3 ❖ Using the equipment with Bluetooth wireless technology on board airplanes, or ❖ In any other environment where the risk of interference to other devices or services is perceived or identified as harmful.
22 5.375 x 8.375 ver 2.3 The legal communications mentioned in the above item refer to radio communications operated in accordan ce with telecommunication laws and regulations.
23 5.375 x 8.375 ver 2.3 3. TOSHIBA Direct PC Monday – Friday: 10: 00 – 17:00 T oll Free T el: 0120-15-1048 Direct Dial: 03-3457-4 850 Fax: 03-3457-4868 Device Authorization This device obtains th.
24 5.375 x 8.375 ver 2.3 Location of the Required Label (Sample shown below . Location of the label and manufacturin g information may vary .) This appliance contains a laser syst em and is classified as a CLASS 1 LASER PRODUCT . T o use this model properl y , read th e user’ s guide carefully and keep it for your fut ure reference.
25 5.375 x 8.375 ver 2.3 Export Administration Regulation This document contains technical data that may be controlled under the U.S. Export Administration Regulations, and ma y be subject to the approval of the U.S. Department of Commerce prior to expo rt.
26 5.375 x 8.375 ver 2.3 T rademarks Satellite is a registered trademark of T oshiba America Information Systems, Inc. and/or T oshiba Corporation. Microsoft, W indows, and W indows V ista are either registered trademarks or trademarks of Micros oft Corporation in the United S tates and/or other countries.
27 5.375 x 8.375 v er 2.3 Contents Introduction ................................................................................ 35 This guide ...............................................................36 Safety icons .............................
28 Contents 5.375 x 8.375 v er 2.3 Using the computer fo r the first time ......................47 Opening the display panel ................................. 47 Your computer’s features and specifications ....48 Turning on the power ...............
29 Contents 5.375 x 8.375 v er 2.3 Caring for your computer ........................................84 Cleaning the computer ......................................84 Moving the computer ........................................84 Using a computer lock .
30 Contents 5.375 x 8.375 v er 2.3 Chapter 3: Mobile Comput ing................................................. 104 Toshiba’s energy-saver design..............................104 Running the computer on battery power ..............104 Battery Notice .
31 Contents 5.375 x 8.375 v er 2.3 Surfing the Internet .........................................131 Internet features ..............................................131 Uploading to, and downloading files from, the Internet ...........................
32 Contents 5.375 x 8.375 v er 2.3 TOSHIBA Button Support ......................................156 CD/DVD Drive Acoustic Silencer ...........................157 TOSHIBA Accessibility .......................................... 158 Fingerprint Authentication Utility .
33 Contents 5.375 x 8.375 v er 2.3 ExpressCard™ problems ................................. 191 Printer problems .............................................193 Modem problems ............................................193 Wireless networking problems .
34 Contents 5.375 x 8.375 v er 2.3 Glossar y .................................................................................... 224 Index............
35 5.375 x 8.375 ver 2.3 I n t roduct ion W elcom e to the world of powerful, portable, multim edia computing. W ith your T oshi ba noteb ook computer , your work and entertainment can accompany you wherever you go.
36 Introd uctio n This guide 5.375 x 8.375 ver 2.3 The product specifications and configuration i nformation are designed for a product Series. Y our particular model may not have all the features and specifications listed or illustrat ed.
37 Introduction Safety icons 5.375 x 8.375 ver 2.3 Safety icons This manual contains safety instruct ion s th at must be observed to avoid potential hazards that could result in personal in juries, damage to your equipmen t, or loss of dat a.
38 Introd uctio n Other documentation 5.375 x 8.375 ver 2.3 Other documentation Y our computer comes with the followin g docu mentation: ❖ An electronic version of the user ’ s guide (this document) ❖ It may also contain guides for other programs that may come with your system.
39 Chapter 1 Getting Started This chapter provides tips for working comfortably , summarizes how to connect components, and expl ains what to do the fi rst tim e you use your notebook computer . Selecting a place to work Y our computer is portable and designed to be used in a variety o f circumstances and locations.
40 Getting Started Selecting a place to work ❖ Extreme heat, cold, or humidity . ❖ Liquids and corrosive chemicals. Keeping yourself comfortable The T oshiba Instruction Manual for Safety and Comf.
41 Getting Started Selecting a place to work ❖ Never turn of f the computer if a dr ive light indicates a drive is active. T urning off the computer whi le it is reading from or writi ng to a disk/disc or flash media may damage the disk/disc or fl ash media, the drive, or both.
42 Getting Started Setting up your computer Setting up your computer TECHNICAL NOTE: Y ou must complete all setup steps up to and including “Setting up your software” on page 42 before a dding external or internal components to your computer . These components include, but are not limited to, a mouse, keyboa rd, printer , memory , and PC Cards.
43 Getting Started Re gistering your computer with T oshib a Registering your computer with T oshiba Product registration is strongly recom mended, and allows T oshiba to send you periodic updates, announcement s, and special offers applicable to your p roduct.
44 Getting Started Connecting to a power so ur ce Connecting to a power source Y our computer requires power to o p erate. Use the power cord/cable and AC adaptor to connect the comp uter to a live electrical outlet, or to charge the computer’ s battery .
45 Getting Started Connecting to a po wer sour ce T o connect AC power to the computer: 1 Connect the power cord/cab le to the AC adaptor . (Sample Illustration) Connecting the power cord/cable to the.
46 Getting Started Char ging the main battery The computer ’ s main battery light gives yo u an indication of the main battery’ s current charge: ❖ Glows amber while the main battery is being ch.
47 Getting Started Using the computer for the f irst time Battery life and charge time may var y depending on the applications, power management settings, and features used. Using the computer for the first time The computer is now ready for you to turn it on and begin using it .
48 Getting Started Using the computer for the fir st time Y our computer’ s features and specifications Certain notebook chassis are desi gned to accommodate all possible configurations for an entire produc t Series.
49 Getting Started Adding memory (optional) When you turn on the computer for the first time, do not turn off the power again until the operating system has loaded completely . Adding memory (optional) HINT : T o purchase additional memor y modules, see the accessories information packaged with your system or visit accessories.
50 Getting Started Adding memory (optional) Installing a memory module with the computer’ s power on may damage the computer , the module, or both. The computer has two memory slot s—Slot A and Slot B. Y ou can install one or two memory modules. Before you install or remove a memory module, turn off the computer using the Start menu.
51 Getting Started Adding memory (optional) 5 Close the display panel an d turn the com puter upside down to locate the memory module slot cover . (Sample Illustration) Locati ng the memory module slot cover 6 Using a small Phillips screwdriver, loosen the two screws that secure the memory modul e slot cover .
52 Getting Started Adding memory (optional) Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up. Avoid touch ing the connector on the memory module or on the computer .
53 Getting Started Adding memory (optional) 12 Firmly press the mem ory module into the memo ry slot’ s socket at approximately a 30-degree an gle (to the horizontal surfa ce of the computer).
54 Getting Started Adding memory (optional) Do not force the memory module into position . The memory module should be completely inserted in to the socket and level when secured in place. (Sample Illustration) Inserting the memory modul e into the slot 14 Replace the memory modu le slot cover and secure it using the two screws.
55 Getting Started Adding memory (optional) Removing a memor y module If you need to remove a memory modul e: 1 Complete steps 1 – 8 in “Installing a memory modu le” on page 49 to shut down the computer and open the mem ory module slot cover . Do not try to remove a memor y module with the computer turned on.
56 Getting Started Adding memory (optional) 3 Gently lift the m e m o ry module to a 30-degree angle and slide it out of the slot. (Sample Illustration) Removing the memory module 4 Replace the memory modu le slot cover and secure it using the screws.
57 Getting Started Har d Drive Recovery Utilities From time to time, Windows ® will display a pop-up that says, “Windows ® needs your permission to continue.” This is a security feature to prevent programs or people from doing things on your computer without your permission.
58 Getting Started Har d Drive Recovery Utilities Creating Recovery CDs/DVDs Depending on your system con fig uration, you may be able to copy the Hard Drive Recovery Utilities to CD or DVD which gi v.
59 Getting Started Har d Drive Recovery Utilities 3 Select the items you want to copy by clicking the check bo x next to the item’ s Na me—recovery files, applications (original bundled drivers and applications), or both the reco very files and applications.
60 Getting Started Har d Drive Recovery Utilities Hard Disk Drive Recovery using the recover y partition Y ou have the options of recoverin g your sy stem using the Hard Drive Recovery partition to th.
61 Getting Started Har d Drive Recovery Utilities Recovering the original factory image (recommended recovery method) Recovering a hard disk drive to its out of box state deletes all parti tions on the hard disk drive and you r information will be lost.
62 Getting Started Har d Drive Recovery Utilities Erasing the hard disk The Recovery W izard allows you to delete all data and partitions from the hard di sk. T o delete the data and partit ions from your h ard disk: 1 On the T o shiba Recovery W izard screen, select Erase the hard disk , and then click Next .
63 Getting Started Har d Drive Recovery Utilities Recovering the C: partition of the HDD without changing the current partition size Recovering the C: drive to its factory default setting reformats your drive and your information on the recovered drive will be lost.
64 Getting Started Har d Drive Recovery Utilities 4 Click Next to begin the restoration. Once complete, a message displays that the HDD has been recovered.
65 Getting Started Using the T ouchP ad™ Checking the HDD operating status After restoring your hard disk driv e, you can check its status as follows: 1 Click Start . 2 Right-click Computer . 3 Select Manage . 4 Click Disk Manageme nt . 5 Highlight the hard disk drive in the V olume list to display its status in the lower po rtion of the screen.
66 Getting Started Using the T ouchP ad™ Because the T ouchPad is much smaller than the display screen, moving your cursor acros s the screen often means having to move your finger several times across the T ouchPad in the preferred direction.
67 Getting Started Using the Dual Mode P ad Using the Dual Mode Pad (A vailable on certain models) Using Dual Mode The Dual Mode feature allows you to switch between Cursor Mode (the default mo de) and Button Mode.
68 Getting Started Using the Dual Mode P ad In order to use the virtu al buttons you mu st first enable Dual Mode in the Mouse Properties dialog box. After that, yo u can use the virtual buttons as follows: 1 T ap the mode switch button to enab le the virtual buttons.
69 Getting Started Using external display de vices Configuring virtual buttons The virtual buttons at the top of the Dual Mode Pad are pre- configured for the Email, Config Free, and Print functi ons. Y ou can assign different functions to these buttons if you wish.
70 Getting Started Using external display de vices 3 T urn on the external device. Y our computer will automat ically detect the external display device and activate a screen with display options. 4 Select the settings you desire and click Ap p l y . 5 Click OK .
71 Getting Started Using an external k eyboar d ❖ TV (or other external video device) only ❖ Built-in display and external monitor (extended desktop) ❖ Built-in display and TV (extended desktop) (Sample Image) Display options window The right-most icon in the above illustration is for the Swap Image Display mode.
72 Getting Started Using a mouse Using a mouse Y ou may want to use a mouse inst ead of the computer’ s built-in T ouchPad. Y ou can use a USB-compatible mouse. Connecting a printer Y our printer documentation may require you to install the printer software before physically connecting the printe r to your computer .
73 Getting Started Connecting an optional external disk ette drive Setting up a printer Some printers require a specific installation process. Refer to your printer installation guide for instructions before completing the following procedure. If your printer does no t support Plug and Play , follow t hese steps to set it up for the first time.
74 Getting Started T urning off the computer T o connect an optional external USB dis kette drive, connect the cable to one of the computer ’ s USB ports.
75 Getting Started T urning off the computer TECHNICAL NOTE: Before using the Shut Down option to turn off your computer , save your files and make sure all disk/disc activity lights are off. If you change your mind and decide to continue working after all, wait a few seconds before turning the computer on again.
76 Getting Started T urning off the computer Sleep mode The Sleep command places the co mputer into a power -saving mode. Sleep saves the current state of the computer to memory s o that, when you restart the computer, you can continue workin g from where you left off.
77 Getting Started T urning off the computer Using the Shut Down command The Shut down command complete ly shuts down the computer without saving your work or the cu rrent state of the computer . This command closes all open progr ams, shuts down the operating system, and then turns of f your computer .
78 Getting Started T urning off the computer 3 Click Change advanced power settings . The Advanced settings tab of the Po wer Options window appears. (Sample Image) Advanced settings tab of P ower Options scr een 4 Click Power buttons and lid to display the actions that you can configure.
79 Getting Started T urning off the computer Restarting your computer T o start the computer up again, press the power button until the on/off light glows blue. If you turn off the computer by closing the display panel, you can start it again by opening the display panel.
80 Getting Started T urning off the computer 2 Click Change pl an settings under the power pl an to be customized. The Edit Plan Settin gs window appears. 3 Click Change advanced power settings . The Advanced settings tab of the Power Options w indow appears.
81 Getting Started T urning off the computer 6 Click App l y . 7 Click OK . Once the computer is configured, you can place it in to Hibernation mode by either pressing the power but ton or closing the display panel, depending on the Hibernation options set.
82 Getting Started T urning off the computer Configuring Sleep mode options Y ou can place the computer into Sl eep mode by eith er pressing the power button or closing the display panel. Y ou can also specify an amount of time after which the co mputer automatical ly goes into Sleep mode.
83 Getting Started T urning off the computer 4 Click Change advanced power settings . The Advanced settings tab of the Po wer Options window appears. (Sample Image) Advanced settings tab of P ower Options scr een 5 Click Power buttons and lid to display the actions that you can configure.
84 Getting Started Customizing your comp uter’ s settings Starting again from Sleep mode T o start up the computer from Sleep mode, press the power button until the on/off light glows blue.
85 Getting Started Caring for your computer Do not pick up the computer by its display panel or by the back. Doing so could damage the system. Using a computer lock Y ou may want to secure your com puter to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable.
86 Chapter 2 Learning t he Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently . Y our work stays in the computer ’ s temporary memory unt il you save it to the disk.
87 Learning the Basics Computing tips ❖ Back up your files to disks (or other rem ovab le media) on a regular basi s. Label the backup c opies clearly and store them in a safe place.
88 Learning the Basics Using the ke yboard Using the keyboard Y our computer ’ s keyboard contai ns character keys, control keys, function keys, and sp ecial W indows ® keys, providing all the functionality of a full-size keyboard.
89 Learning the Basics Using the ke yboard Ctrl, Fn, and Alt keys (Sample Illustration) Ctrl, Fn, and Alt keys The Ctrl , Fn , and Alt keys do different things depending on the program you are using. For more information, see yo ur program documentation.
90 Learning the Basics Using the ke yboard Overlay keys The keys with gray numbers and sym bols on the front of them form the numeric and cursor overlay . Th is overlay lets you enter numeric data or control the cursor as you would using the 10-key keypad on a desktop comput er’ s keyboard.
91 Learning the Basics Starting a pr ogram Starting a program The easiest way to start a program is to double-click the name of the file that contains the informatio n you want to work on. T o find the file, use the Start menu or W indows ® Explorer .
92 Learning the Basics Starting a pr ogram Starting a program from Windows ® Explorer If a program is not listed in th e All Programs menu, yo u can start it from W indows ® Explorer . Windows ® Explorer gives you a vi ew of your computer ’ s contents as a hi erarchy or “tree.
93 Learning the Basics Saving your work Starting a program using the Start Search field This example uses the S tart menu’ s Start Search field to start Wo r d P a d : 1 Click Start to display the Start menu. The Start Search fie ld appears at the bottom of the Start menu.
94 Learning the Basics Saving your work Saving files 1 In your W indows ® -based appli cation, click File , and then Sa ve . 2 Click Brow se folders . If you are working with a docu ment that already has a file name, this is all you need t o do . If you created a new document, your program displays a Save As dialog box.
95 Learning the Basics Printing your work Using a file extension Most programs assign an extension to the file name that identifies the file as being created in the pr ogram with a particular format. For example, Microsoft ® W ord saves files with a .
96 Learning the Basics Backing up your work 3 Specify the print parameters. Fo r example, the range of pages and number of copies to print. 4 Click Print . Backing up your work Back up all the files you create in case something happens to you r computer .
97 Learning the Basics Using the optical drive Using the optical drive Optical storage has become the preferred medium for software, music, and video. Digital versatil e di scs (D VDs) provide a significant increase in data storage and support features that are not available on any other video plat fo rm.
98 Learning the Basics Using the optical drive Do not press the eject button or turn off the computer while the drive in-use indicator light is glowing. Doing so could damage the dis c or the drive. When the disc tray is open, be careful not to touch the lens or the area around it.
99 Learning the Basics Using the optical drive The Stop button s tops a disc that is currently playing. The Previous track b utton returns to the preceding track on the disc. The Next track button skips to the following track on the disc. Inserting a compact disc T o insert a compact disc into the drive: 1 Make sure the computer is turned on.
100 Learning the Basics Using the optical drive 6 Place the disc carefully in th e disc tray , label side up. (Sample Illustration) P osi tioning the disc in the drive 7 Gently press the disc onto the center spindle until it clicks into place. Handle DVDs and CDs carefully , making contact only with the center hole and edge.
101 Learning the Basics Using the optical drive When using Windows Media ® Player , your system may not be able to activate Sleep or Hibernation modes. T o prevent this from occurring, close Windows Media ® Player before you select Sleep or Hibernation mode.
102 Learning the Basics Using the optical drive If your disc does not run using this m ethod, try using an application that is associated with the media on the disc. For example, if it is a music CD, open Windows Media ® Player and use it to select and then play the CD.
103 Learning the Basics T oshiba’ s online resour ces 2 Pull the tray out until it is fully open , remove the disc, and place it in its protective cover .
104 Chapter 3 Mobile Computing This chapter covers all aspects of using your com put er while traveling. T oshiba’ s energy-saver design Y our computer enters a low-power suspension mode when it is not being used, thereby conserving energy and saving money in the process.
105 Mobile Computing Running the computer on battery power Battery Notice Battery life may vary considerably from specifications depending on product model, configuration, app licat ions, power manag ement settings and features utilized, as well as th e natural perform ance variations produced by the design of i ndividual componen ts.
106 Mobile Computing Char ging batteries Power management Y our computer ships wi th th e power management op tion s preset to a configuration that will provide the most stable operating environment and o ptimum syst em performance for bot h AC power and battery modes.
107 Mobile Computing Char ging batteries Charging the main battery T o charge the main battery while it is in your computer , plug the computer into a live electrical out let.
108 Mobile Computing Monitoring main battery power The above error message may vary by computer model. The RTC battery does not charge while the computer is turned off even when the AC adaptor is ch arging the computer . The RTC battery charges when the computer is powered on.
109 Mobile Computing Monitoring main battery power If the AC power light flashes amber during charging, either a battery pack is malfunctioning, or it is not receiving correc t input from the AC power supply . Disconnect the AC power cord/cable and remove the ba tter y pack.
110 Mobile Computing Monitoring main battery power Determining remaining battery power Wait at least 16 se conds after turning on the computer before trying to monitor the remaining battery power . The computer needs this time to check the battery’ s remaining capacity and perform its calculations.
111 Mobile Computing Monitoring main battery power If you have Hibern ation mode en ab led (the default), the compu ter copies the details of your open pr ograms and fi les to the hard disk before shutting down. For m ore informat ion on using Hibernation, see “Hibernation mode” on page 75.
112 Mobile Computing Monitoring main battery power 4 Click Battery to display the battery options. 5 Configure the alarm settings to suit your needs. Conserving batter y power How long a fully charged.
113 Mobile Computing Monitoring main battery power Power Plans Y ou can choose a predefined Power Plan or select your own combination of power options. T o do thi s : 1 Click Start , Contr ol Panel , Mobile PC , and then Power Options . The W indows ® Power Options window appears.
114 Mobile Computing Monitoring main battery power By default the three power plans Balanced, Power Saver , and High Performance are satisfact ory for most people and d o not need to be edited. The Power Saver plan is th e best used for maximum battery time.
115 Mobile Computing Changing the main battery Changing the main batter y When your main battery has run out of power , you have two options: plug in the AC adaptor or install a charged main battery .
116 Mobile Computing Changing the main battery 5 Slide the battery release lock to the unlocked position. (Sample Illustration) Unlocking the battery r el ease lock 6 Slide the battery release latch to release the battery . 7 Pull the discharged battery out of the computer .
117 Mobile Computing Changing the main battery Inserting a charged battery T o insert a battery: 1 W ipe the terminals of the charge d battery with a clean cloth to ensure a good connection. 2 Insert the charged battery into the slot until the latch clicks.
118 Mobile Computing T aking car e of your battery 4 T urn the computer right side up. 5 Reconnect any cables that we re removed in step 3 of “Removing the battery from the computer” on page 1 15 . 6 Restart the computer . T aking care of your battery The following sections offer tips on how to take care of your battery and prolong its life.
119 Mobile Computing T aking car e of your battery Maintaining your batter y Fully discharging your battery pack will allow better accuracy of the battery meter . T o fully discharge your battery p ack: ❖ Periodically , disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges.
120 Mobile Computing Disposing of used b atteries Disposing of used batteries The life of a battery pack depends on usage. When the battery pack needs replacing, the main battery light flashes amber shortly afte r you have fully recharged the battery .
121 Mobile Computing T raveling tips T raveling tips The environmental precautions listed in “Selecting a pl ace to work” on page 39 , also apply while traveling. ❖ Never leave your computer on a sunny ledge or in a place where it could get wet or covered in d ust.
122 Chapter 4 Exploring Y our Computer’ s Features In this chapter , you will explore some of the special features of your notebook computer . Exploring the desktop The desktop is the launching pad for everything you can do in the W indows ® operating sy stem.
123 Exploring Y our Computer’ s Features Exploring the desktop Finding your way around the desktop Y our computer ’ s desktop includes several standard features: icons, Start button, T askb ar , Notification Area, and background patt ern.
124 Exploring Y our Computer’ s Features Explorin g the desktop If you place the cursor over a n icon, a popup description of the file contents appears. Y our desktop may contain other icons dependin g on you r configuration. See W indows ® online Help fo r mo re specific information on each icon and how to use it.
125 Exploring Y our Computer’ s Features Setting up for communications Setting up for communications T o connect to the Internet, use an online service, or communicate across the telephone lines wit.
126 Exploring Y our Computer’ s Features Setting up for communications 7 Click OK to close the properties dialog box for that sp ecifi c modem. 8 Click OK to close the Phone and Modem Option s di alog box.
127 Exploring Y our Computer’ s Features Setting up for communications 2 Connect the other end to the RJ-1 1 wall jack. (Sample Illustration) Connecting to a wall jack Connect the built-in modem only to ordinary analog phone lines. Never connect the built-in modem to a digital line (ISDN).
128 Exploring Y our Computer’ s Features Setting up for communications Setting up the connection T o set up an office connection, consult your network administrator for network settings and additi onal con siderations.
129 Exploring Y our Computer’ s Features An overview of using the Internet Using Wireless LAN connectivity Wireless connectivity and some features may require you to purchase additional software, external hardware or services. Availa bility of public wireless LAN access points may be limited.
130 Exploring Y our Computer’ s Features An overview of using the Internet The Internet The Internet is an association of thousands of networks and millions of computers arou nd the world connected by communications lines. They all work together to share information.
131 Exploring Y our Computer’ s Features An overview of using the Internet If you are using your computer at the office, then you probably connect to the Internet through your company’ s network. See your network administrator ab out connecting to the Internet.
132 Exploring Y our Computer’ s Features Explor ing audio featur es Uploading to, and downloading files from, the Internet T ransferring files fr om one computer to another is termed uploading (transferring data from you r computer to a site on the W eb), or downl oading (transferring data from a site on the W eb to your computer).
133 Exploring Y our Computer’ s Features We b C a m Using external speakers or headphones Y our computer is equipped with a full stereo sound sy stem with internal speakers. Instead of using the internal speakers, you can connect headphones or a pair of external stereo speakers.
134 Exploring Y our Computer’ s Features Using PC Car ds Using PC Cards (A vailable on certain models) This section applies if you have a PC Card slot. TECHNICAL NOTE: For PCMCIA-compatible PC Cards, check the package to make sure they conform to the PCMCIA 2.
135 Exploring Y our Computer’ s Features Using PC Car ds Removing a PC Card Be sure to disable the PC Card prior to removing it. Otherwise, the system may be damaged. Before removing a PC Card, make sure that no applications or system services are using the card.
136 Exploring Y our Computer’ s Features Using an Expr essCard™ Using an ExpressCard ™ (A vailable on certain models) This section applies if you have a ExpressCard ™ slot.
137 Exploring Y our Computer’ s Features Using the Bridge Media Adapter Slot 3 Press the ExpressCard eject button once to pop it ou t sl ightly , and push it in to remove the ExpressCard . The ExpressCard ejects sl ightly from the slot. 4 Grasp the edges of the ExpressCar d and slide it out of the slot.
138 Exploring Y our Computer’ s Features Using the Bridge Media Adapter Slot Inserting memory media The following instructions apply to all types of supp orted media devices. 1 T urn the media so that the cont acts (metal areas) are face down. 2 Push the media into the ad apter until it locks in place.
139 Exploring Y our Computer’ s Features Using the i.LINK ® port Do not remove memory media while data is being written or read. Even when the Windows ® message “copying...” disappears, writing to the media might still be in progress and your data could be destroyed.
140 Chapter 5 T oshiba Utilities Y our computer includes several utili ties design ed to help you to reconfigure your system to best meet your individu al needs. T ogether , these allow you to ascerta in certain system details, set additional options, or change defaul t options.
141 T oshiba Utilities TOSHIB A Assist TOSHIBA Assist The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer setti ngs. T o access T OSHIBA Assist, do one of the following: ❖ Double-click the TOSHIB A Assist shortcut icon on the desktop.
142 T oshiba Utilities TOSHIB A Assist Connect The features available in this category are: ❖ ConfigFree™ Connectivity Doctor ❖ Bluetooth ® Settings ❖ Bluetooth ® Local COM Setting s (Sample.
143 T oshiba Utilities TOSHIB A Assist Secure The features available in this category are: ❖ Supervisor passwo rd ❖ User password (Sample Image) T OSHIBA Assist window – Secur e tab.
144 T oshiba Utilities TOSHIB A Assist Protect & Fix The feature available in this category is: ❖ TOSHIBA PC Diagnostic T ool Utility (Sample Image) T OSHIBA Assist window – Pr otect & F i.
145 T oshiba Utilities TOSHIB A Assist Optimize The features available in this category are: ❖ T oshiba Hardware Setup ❖ TOSHIBA Zooming Utilit y ❖ CD/DVD Drive Acoustic Silencer ❖ TOSHIBA Acc.
146 T oshiba Utilities TOSHIB A Applicatio n Installer TOSHIBA Application Installer (A vailable on certain models) The TOSHIBA Application Installe r allows you to re install the drivers and applications that were originally bundled with your computer .
147 T oshiba Utilities Setting passwor ds Setting passwords Setting a password lets you walk away from your computer, providing additional p rotection for your files. When you set a password, you must enter the password before you can work on your computer again.
148 T oshiba Utilities Setting passwor ds Using a supervisor password A supervisor password preven ts other users from changing hardware configuration options.
149 T oshiba Utilities Setting passwor ds 6 Click OK . A pop-up screen ap pears asking for the User Password Mode. 7 Select whether the user password allows the user to change the hardware configurati.
150 T oshiba Utilities Setting passwor ds T o register a password for the power-on password functions: 1 Click Start , All Programs , To s h i b a , Uti lities , and then TOSHIB A Assist . The TOSHIBA Assist window appears. 2 On the left side, click the Secure tab.
151 T oshiba Utilities TOSHIB A PC Diagnostic T ool Utility 4 Click Not Registered. A pop-up screen ap pears asking for a password. 5 Enter the user password, then click OK . TOSHIBA PC Diagnostic T ool Utility This utility can help diagnose problems with dev ices in your computer .
152 T oshiba Utilities TOSHIB A SD™ Memory Card F ormat Utility TOSHIBA SD ™ Memor y Card Format Utility This utility is used to format SD ™ cards used with the Bridge Media Adapter slot. T o format an SD memory card using thi s utility: 1 Click Start , All Programs , To s h i b a , Uti lities , and then SD Memory Card F ormat .
153 T oshiba Utilities T o s h i b a H a rd w a re S e t u p T oshiba Hardware Setup T oshiba Hardware Setup is the T oshiba configuration man agemen t tool available through the W indows ® operating system.
154 T oshiba Utilities T o s h i b a H a rd w a re S e t u p ❖ Boot Priority —Allows you to change the sequence in which your computer searches the dr ives for the operating system Y ou can also manually choose th e Boot Priority by pressi ng the power button, then quickl y pressing the F12 key , or the right or left arrow keys.
155 T oshiba Utilities TOSHIB A Zooming Utility TOSHIBA Zooming Utility This utility allows you to select which appli cations will work with the zoom in/out hot keys (see “Changing screen resolution ” on page 221 ).
156 T oshiba Utilities TOSHIB A Butto n Support For more information about how to use the TOSHIBA Zooming utility , right-click the icon in the Notification Area and then click Help . TOSHIBA Button Support TOSHIBA Button Support allows y ou to customize t he Internet browser button and the Media butto n.
157 T oshiba Utilities CD/D VD Drive Acoustic Silencer CD/DVD Drive Acoustic Silencer This utility can slo w the speed of your op tical drive to make it run more quietly .
158 T oshiba Utilities TOSHIB A Accessibility TOSHIBA Accessibility The TOSHIBA Accessibility utility al lows you to use the Fn key to create a hot key combinati on with one of the fu nction keys without pressing the two keys simultaneously as is usually required.
159 T oshiba Utilities F ingerprint Au thentication Utility Fingerprint Authentication Utility (A vailable on certain models) The fingerprint authentication utili ty (available on certain models) can be used to replace the ke yboard-based user/BIOS password authentication syst em when booti ng up.
160 T oshiba Utilities F ingerprint Au thentication Utility 6 Swipe your finger on the reader . A sample will be created and indicated by a Fingerprint icon. 7 Repeat the previous step. Swipe the s ame finger on the reader two more times to create two mor e sample s.
161 T oshiba Utilities F ingerprint Au thentication Utility Fingerprint Logon The fingerprint utility enables logon to yo ur computer using fingerprints. During user enrollment, fingerprint samples are sav e d and associated with the user’ s W indows ® user account.
162 T oshiba Utilities F ingerprint Au thentication Utility Y our hardware must support Power -on security to use the single logon feature. Y ou must have administrative privileges to change settings. T o enable power-on security single logon: 1 Open the Contro l Center and go to Settings - System Settings .
163 T oshiba Utilities F ingerprint Au thentication Utility Fingerprints ❖ Enroll or edit current user ’ s fingerprint templat e s— Runs the fingerprint enrollment wizard.
164 T oshiba Utilities F ingerprint Au thentication Utility Elevate Administrative Privileges for User ❖ Elevate administrative privileg es for user .—By default, the operating system assumes you are a user and not an administrator, and renders most of the system settings in the Control Center gray and unavai lable.
165 T oshiba Utilities F ingerprint Au thentication Utility Registering a new Web page or dialog Y ou are logged on to the computer and want to register a new W eb page. T o create a new registration: 1 Display a W e b pag e you want to register . 2 Fill in the data you want to re play the next time you access this W eb page.
166 T oshiba Utilities F ingerprint Au thentication Utility ❖ If the page has multip le registered forms, but there is no active form, all exi sting regist ered form s for the page are displayed. Y ou then select the one to be replayed. Replaying a registered dialog Y ou are logged on to the computer and want to replay a registered dialog.
167 T oshiba Utilities F ingerprint Au thentication Utility 3 Select Registrations . 4 Select a registration. 5 Click Delete . How to Delete the Fingerprint Data Fingerprint data is stored in the non-volatile memory .
168 T oshiba Utilities F ingerprint Au thentication Utility Observe the following before you swipe your finger on the reader , whether for fingerprint enroll ment /registratio n or recognition. ❖ W a sh and dry your h ands thoroughly . ❖ Remove static electricity from your fingers by touching any metal surface.
169 T oshiba Utilities ConfigF ree ™ Fingerprint reader limitations ❖ The fingerprint reader compar es and analyzes the unique characteristics in a fingerpr int. However , there may be instances where certain users are unable to register their fingerprints due to insufficiently unique charact eristics in their fingerprints.
170 T oshiba Utilities ConfigF ree™ Getting Started This section contains informat ion about the ConfigFree main screen, and how to start and set up ConfigFree. For more detailed information on setting up and using ConfigFree, see the Help File included in the appli catio n.
171 T oshiba Utilities ConfigF ree ™ ❖ Status of W ireless Connecti on switch (Sample Image) Connect ivity Doctor scr een Profile Settings The Profile Settings utility lets you save network settin gs in “profiles.” ConfigFree profiles ar e useful for easily switching network settings and devices.
172 T oshiba Utilities ConfigF ree™ T o create a profile: 1 Click the icon in the Notif icat i on Area. 2 Move the pointer to Prof ile . 3 Click Open Settings . The ConfigFree Profile Settings window appears. (Sample Image) ConfigF r ee Pr ofile Settings window 4 Click Add to start the Creat e Profile Wi zard.
173 Chapter 6 If Somet hing G oes W r ong Some problems you may encounter wh en using your computer are relatively easy to identify and solv e. Others may req uire help from your network administrator or the manufacturer of th e software program. This chapter aims to help you solve many problems by yourself.
174 If Something Goes Wrong Pr oblems wh en you turn on the computer 2 Click the A pplications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. 3 Select the program you want to close, then click End T ask .
175 If Something Goes Wrong Pr ob lems when you turn on the computer If you are using an AC adaptor , veri fy that the computer is receiving power from the external power source by looki ng at the AC po wer light. If the indicato r is glowing, the computer is connected to a live external power source.
176 If Something Goes Wrong Pr oblems wh en you turn on the computer If you are running on bat tery power , it is recommended that you do not leave the computer in Sleep mode for long periods of time. T o charge the batte ry , leave the comput er plu gged into a live wall outlet for several hours.
177 If Something Goes Wrong The W indows ® oper ating system is not working 5 V e rify that the AC adaptor is th e correct unit for your computer model.
178 If Something Goes Wrong The W indows ® operating system is not wo rking ❖ Safe Mode with Command Prom pt ❖ Enable Boot Logging ❖ Enable low-resolution v ideo (640x480) ❖ Last Known G ood .
179 If Something Goes Wrong Resolving a hardwar e conflict The Windows ® operating system can help you If the operating syst em has started p roperly but you still have a problem using your co mputer , the online Help can assist you in troubleshooting the pro blem.
180 If Something Goes Wrong Resolving a har dwar e conflict The device most recently connected to the system is the one mos t likely to be causing a conflict. Resolving conflicts There are several things you can do to res olve hardware conflicts: ❖ Get the most recent driver s from the manufacturer .
181 If Something Goes Wrong Resolving a hardwar e conflict ❖ The Resources tab, which lists resources assigned to the monitor , optional external op tical drive, opt ional external diskette drive, and other power-using functions. This tab does not appear if the device is not using resources.
182 If Something Goes Wrong Resolving a har dwar e conflict Power and the batteries Y our computer receive s its power through the AC adaptor and power cord/cable or from the sy stem batteries (battery , optional secondary battery , and real-time clock (R TC) battery).
183 If Something Goes Wrong Resolving a hardwar e conflict Check the power options via your Power Plans (see “Power Plans” on page 113 ). Have you added a device, such as a PC Card or memory modul.
184 If Something Goes Wrong Resolving a har dwar e conflict Display problems Here are some typical display problems and their sol utions: The screen is blank. Display Auto Off may have go ne into effect. Press any key to activate the screen. Y ou may have activated the instan t p assword feature by pressing Fn and F1 simultaneously .
185 If Something Goes Wrong Resolving a hardwar e conflict The built-in scr een flickers. Some flickering is a normal resu lt of the way the screen produces colors. T o reduce the amount of flickering, try using fewer colors. T o change the number of colors displayed: 1 Right-click in a blank area of the Windows ® desktop.
186 If Something Goes Wrong Resolving a har dwar e conflict Disk drive problems Problems with the hard disk or with a diskette drive usually show up as an inability to access the disk or as sector errors. Sometimes a disk problem may cause on e or more files to appear to have garb age in them.
187 If Something Goes Wrong Resolving a hardwar e conflict Y our data files are damaged or corrupted. Refer to your software documentation for fi le recovery procedures. Many software packages auto matically create backup files. Y ou may also be able to recover lost data using utility software.
188 If Something Goes Wrong Resolving a har dwar e conflict Y ou press the disc eject b utton, but the dri ve tray does not slide out. Make sure the computer is connec ted to a power source and turned on. The optical drive eject mechan ism requires power to operate.
189 If Something Goes Wrong Resolving a hardwar e conflict The computer emits a loud , high-pitched noise. This is feedback between the mi crophone and the speakers. It occurs in any sound system when input from a mi crophone is fed to the speakers and the speaker volume is too loud.
190 If Something Goes Wrong Resolving a har dwar e conflict 3 Double-click the appropriate PC Card. The operating system displays your PC Card’ s Properties dialog box, which contains informati on abo ut you r PC Card configuration and status. The computer stops working (hangs) when y ou insert a PC Card .
191 If Something Goes Wrong Resolving a hardwar e conflict ExpressCard™ problems (A vailable on certain models) ExpressCards ™ (PCMCIA-compatibl e) in clude many ty pes of devices, such as a removable hard disk, additional memory , or a pager . Most ExpressCard problems occur during installation and setup of new cards.
192 If Something Goes Wrong Resolving a har dwar e conflict The computer stops working (hangs) when y ou insert an ExpressCard . The problem may be caused by an I/O (input/output) conflict between the PCMCIA socket and a nother device in the system. Use Device Manager to make sure each device has its own I/O base address.
193 If Something Goes Wrong Resolving a hardwar e conflict Printer problems This sectio n lists some of the most common printe r problems. The printer will not print. Check that the printer is connect ed to a working power outlet, turned on and ready (on line).
194 If Something Goes Wrong Resolving a har dwar e conflict Check the port settings to make su re the hardware and software are referring to the same COM port. See “Determining the COM port” on page 125 . Check the communications parameters (bau d rate, pari ty , data length and stop bits) specified in the communicati ons pro gram .
195 If Something Goes Wrong Resolving a hardwar e conflict ❖ If another computer is on the same network , verify that it has network access, and can connect to the Internet. If, for example, the other computer cannot browse to a public W eb site, the ISP’ s (Internet Serv ice Provider) service may be disrupted.
196 If Something Goes Wrong Resolving a har dwar e conflict ❖ Use the PING command to verify a connection to the gateway at 192.168.1.1 (a default gateway for most wireless routers). 1 Click Start to open the S tart menu. 2 Ty p e Cmd in the search field.
197 If Something Goes Wrong D V D operating pr oblems The Windows ® operating system wireless management facility does not work. If you are using an external W i-Fi ® adapter (a PC Card, USB adapter , or other variety), check if th e adapter comes w ith its own management utility .
198 If Something Goes Wrong Develop good computing habits The screen sa ver runs while y ou are watching a mo vie or title. If the screen saver is enabled, it runs on top of any movie or title you are watching. T o disable the screen saver: 1 Right-click on the desktop and click Personalize in the menu.
199 If Something Goes Wrong Develop good computing habits Read the user’ s guides. It is very difficult to provide a fail-safe set of steps you can follow every time you experience a prob lem with th e computer . Y our ability to solve problems will improve as you learn about how the computer and its software work together .
200 If Something Goes Wrong Develop good computing habits 4 In the input field, enter a name th at is descriptive enough to be easily understood in the future, such as “Before installin g Brand X Accounting app.
201 If Something Goes Wrong Develop good computing habits Backing up your data or your entire computer with the Windows ® operating system The most valuable comp on en t of y our computer system is the data you create and store on its hard dr ive.
202 If Something Goes Wrong Develop good computing habits General tips for installing hardware and software Here are a few tips to help ensure safe and easy installation of new hardware (printers, pointing devi ces, external hard drives, DVD writers, scanners, etc.
203 If Something Goes Wrong If you need further assistance 4 Restart the W indows ® operating system. 5 Use the new hardware or software fo r a while, not ing any new problems. Make sure that your critical applicat ions (e-mail, business applicat ions , etc.
204 If Something Goes Wrong Other T oshiba Internet W eb sites Contacting T oshiba If you still need help and suspect th at the pr obl em is hardw are- related, T oshiba offers a vari ety of resou rces to help you.
205 If Something Goes Wrong T oshiba’ s worldwide off ices T oshiba’ s worldwide offices A ustralia T oshiba (Austr alia) Pty . Limited 84-92 T alavera Road North R yde NSW 21 13 Sydney Australia Canada T oshiba Canada Ltd. 191 McNabb Street Markham, Ontario L3R - 8H2 Canada France T oshiba Systèmes (France) S.
206 If Something Goes Wrong T oshiba’ s worldwide offices For more information on additi onal T oshiba worldwide lo cations, please visit: www .toshiba.co .jp/index.htm . United States T oshiba America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618 United States The Rest of Europe T oshiba Eu rope (I.
207 5.375 x 8.375 ver 2.3 Appendix A Hot Keys/TOSHIBA Cards Hot keys and T OSHIBA Cards provide a quic k w a y to mo di fy selected system functions and to launch applications. There are two types of T OSHIB A Cards: Hot Key Cards and Application Cards.
208 Hot Keys /TOSHIBA Ca rds Hot K e y Car ds 5.375 x 8.375 ver 2.3 Using the Hot Key Cards The Hot Key Cards are normally hidden from view . The Cards appear only when the pointing device is moved to the top center edge of the screen. In addition, a Ho t Key Card can be displayed by p ressing the associated hot key .
209 Hot Keys/TOSHIBA Cards Application Car ds 5.375 x 8.375 ver 2.3 Application Cards The Application Cards are used to launch these applications: Not all functions are supported on all models. TOSHIB A Assist For more informat ion, refer to “TOSHIBA Assist” on page 141 .
210 Hot Keys /TOSHIBA Ca rds Application Cards 5.375 x 8.375 ver 2.3 Using the Application Cards T o launch an application using th e Application Cards: 1 Move the cursor to the top center edge of the screen. The TOSHIBA Cards display at the top of the screen.
211 Hot Keys/TOSHIBA Cards Application Car ds 5.375 x 8.375 ver 2.3 3 The Card Case display s two rows of Cards. Cards that appear solid (not tr ansparent) in the top row are enabled and can be selected wh en the Application Cards are displayed. The bottom row contains all of the disabled cards.
212 Hot Keys /TOSHIBA Ca rds Hot ke y functions 5.375 x 8.375 ver 2.3 Hot key functions Hot key functi o ns ar e performed us ing either the Hot Key Cards or by pressing the associated hot key .
213 Hot Keys/TOSHIBA Cards Hot ke y functions 5.375 x 8.375 ver 2.3 Password security The Fn + F1 hot key function act ivates instant security . Th e user logon screen will appear and a user with a valid account will need to log back on to gain access to the computer .
214 Hot Keys /TOSHIBA Ca rds Hot ke y functions 5.375 x 8.375 ver 2.3 Power plan or Fn + This TOSHIBA Card or hot key displays the power plans and cycles throu gh the power plans. The properties of each power plan, and the po wer plans that are displayed by this function, are set in the Power Options window .
215 Hot Keys/TOSHIBA Cards Hot ke y functions 5.375 x 8.375 ver 2.3 Sleep mode or Fn + This TOSHIBA Card or hot key places the computer into Sleep mode. For more info rmation abou t Sleep mode, please see “Using and configuring Sleep mode” on page 81 .
216 Hot Keys /TOSHIBA Ca rds Hot ke y functions 5.375 x 8.375 ver 2.3 Hibernation mode or Fn + This TOSHIBA Card or hot key places the computer into Hibernatio n mode. If Hibernation mode is disabled, this hot key wi ll not respond. For more information on Hibernation mode, see “Using and configuring Hibernation mode” on page 79 .
217 Hot Keys/TOSHIBA Cards Hot ke y functions 5.375 x 8.375 ver 2.3 Display modes or Fn + This TOSHIBA Card or hot key cycles through the power- on display option s.
218 Hot Keys /TOSHIBA Ca rds Hot ke y functions 5.375 x 8.375 ver 2.3 Display brightness Some systems also support an additional Swap Image Display mode. This mode is available only if the current setting is an extended desktop mode (Built-in Display and External Monitor , or Built-in Display and TV).
219 Hot Keys/TOSHIBA Cards Hot ke y functions 5.375 x 8.375 ver 2.3 Disabling or enabling wireless devices or Fn + This TOSHIBA Card or hot key enables/disables the optional wireless devices installed in your com puter . The wireless modes are: ❖ Wi - F i ® enabled—Enables just the Wi-Fi ® module.
220 Hot Keys /TOSHIBA Ca rds Hot ke y functions 5.375 x 8.375 ver 2.3 Disabling or enabling the T ouchPad ™ or Dual Mode Pad or Fn + This TOSHIBA Card or hot key enables/disables either the T ouchPad or the Du al Mode Pad.
221 Hot Keys/TOSHIBA Cards Hot ke y functions 5.375 x 8.375 ver 2.3 Changing screen resolution or Fn + [ Space bar ] This TOSHIBA Card or hot key switches screen resolution.
222 Hot Keys /TOSHIBA Ca rds Hot ke y functions 5.375 x 8.375 ver 2.3 Keyboard hot key functions Fn + This hot key turns t he cursor control overlay on and off. Fn + This hot key turns t he numeric overlay on and off. Fn + This hot key turns t he sc roll lock feature on and of f.
223 5.375 x 8.375 ver 2.3 Appendix B P o wer Cord/Cable C o nnector s Y our notebook computer features a universal power supply you can use worldwide. This appendix show s the shapes of the typical AC power cord/cable connectors fo r various parts of the worl d .
224 Glossar y TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer . Acronyms The following acronyms may appear in this user ’ s guide.
225 Glossary DOS disk operating system DPI dots per inch DSTN dual supertwist nem atic DV D digital versatile (or video) d isc DV D - R O M digital v ersatile (or video) disc read-only mem ory ECP enh.
Glossary 226 SDRAM synchronous dynamic random access memory SRAM static random access memory SVGA super video graphics adapter TFT thin film transistor USB universal serial bus URL uniform resource lo cator WA N wide area network www W orld Wide W eb Te r m s The following terms may appear in this user ’ s guide.
227 Glossary baud rate — The speed at which a comm unication device, such as a printer or modem, tran smits information . Baud rate is the nu mber of signal changes per second (not necessarily the same as bits per second). See also bits per second .
Glossary 228 central processing unit (CPU) — The chip that functions as the “brain” of the computer . It ta kes information from outside sources, su ch as memory or keyboard input, processes the information, and sends the results to another device that uses the information.
229 Glossary device — A component attached to the computer . Devices may be external (outside the computer ’ s case) or internal (inside the computer ’ s case). Printers, disk drives, and modems are examples of devices. device dri ver — A program (called a “driver”) that permits a computer to communicate with a device.
Glossary 230 double-density d iskette — A 3.5-inch diskette that can hold up to 720 KB of information (half the capacity of a high-density diskett e). See also diskette, high-density diskette. download — (1) In communications, to receive a file from another computer through a modem or netw ork.
231 Glossary f ile extension — The three characters foll owing the period (pronounced “dot”) at the end of a file name. The extension indicates the type of file. Examples are .exe for program files and . hlp for help files. See also file name . fo l de r — Also call ed directory .
Glossary 232 hot key — (1) A feature in which cert ain keys in combination with the Fn key can set system op tions or control system param eters, such as the battery save mode. (2) A key or combinat ion of keys that activates a memory resident program.
233 Glossary local area network — See LAN. logical drive — A section of a disk that is recognized by the operating system as a separate disk drive. A system’ s logical drives may differ from its physical driv es . For example, a single hard disk drive may be partitioned into two or m ore logical drives.
Glossary 234 non-system disk — A disk for storin g programs and data that cannot be used to start the computer . Compare system disk . O online — A vailable through the comput er .
235 Glossary port — A socket on the computer where you plug in a cable for connection to a network or a peripheral device. processor — See central pr ocessing unit (CPU) .
Glossary 236 S select — T o highlight or otherwise specify tex t, data, or graphics with the intent to perform some operation on it. serial — Processes that occur one at a time. In communications , it means the transmission of one bit at a time sequentially over a single channel.
237 Glossary W We b — See W orld W ide W eb . Wi- F i ® — A registered trademark term of the Wi-Fi Alliance that stands for W ireless Fidelity , and is anot her term for the communication protocol to permit an Ethernet connect ion using wireless communication components.
238 Index A AC adaptor 44 AC power connecting adaptor 45 accessories memory 49 adding memory 49 Alt keys 89 Application Cards 209 audio files 132 audio features 132 B backing up files 87 battery chang.
239 Index set up 125 compact disc positioning 100 compact discs handling 100 inserting 99 removing 102 , 103 compact disk drive using 97 computer caring for 84 cleaning 84 moving 84 non-system disk or.
240 Index ExpressCard inserting 136 removing 136 external monitor not working 185 mouse 72 external diskette drive connecting 73 external display , adjust ing 71 F F A T (File Allocatio n T able) 186 .
241 Index hot keys 222 not working 175 overlay keys 90 special W indows® keys 89 troubleshooting 183 using 88 keyboard, external 71 keyboard, full-size 88 L lock computer , using 85 M main battery re.
242 Index cord/cable connectors 223 energy-s aving features 104 problem solving 182 turning on 48 power button 48 , 58 power plan hot key 114 power plans 112 power source 44 connecting 45 powering dow.
243 Index main battery 115 RJ-1 1 jack 127 running the computer on battery power 104 S safety computer 12 1 disposing of batteries 120 icons 37 precautions 40 saving files 93 screen blank 184 does not.
244 Index W indows® Explorer 92 W indows® operating system Help and Support 17 9 problem solving 177 W indows® operating system desktop 122 W indows® Start menu 91 wireless networking 129 W izards.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Toshiba A215 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Toshiba A215 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Toshiba A215 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Toshiba A215 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Toshiba A215, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Toshiba A215.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Toshiba A215. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Toshiba A215 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
