Manuale d’uso / di manutenzione del prodotto RF-520LCD del fabbricante Auto Page
Vai alla pagina of 19
RF - 520 LCD 2 - WAY AM/AM LCD COMMUNICATION PROFESSIONAL VEHICLE SECURITY SYSTEM OPERATIONS MANUAL.
2 Introduction 3 Changing Battery XT - 72S Standard Transmitter 3 Remote Transmitter Operation 4 LCD Transmitter Operation 5 Button Lock LCD Transmitter 5 LED Display 5 Chirp Indicators 5 Parking Ligh.
3 Congratulations on your purchase of the RF520LCD vehicle security system. We sincerely hope the purchase of the RF520 security system gives peace of mind to you.
4 WARNINGS: As with any product that performs automatic functions, there are certain safe ty precautions that you must practice and be aware of. 1. Keep the transmitter out of children’s reach. 2. Do not leave anyone in the vehicle while running on remote control.
5 LCD DISPLAY TRANSMITTER OPERATION ONLY: Transmitter Button System Function Remark - (C) System’s Trigger Check Press within 3 seconds - - (C) System’s Status Check Press within 3 seconds (1 second) LCD screen lamp turns on for 5 seconds.
6 ALARM OPERATING CONDITION: Siren / Horn Parking Light LED Doors Starter Dome Light 1. Arming 1 or 3 Chirps 1 Flash Slow Flash Locking Disable 2. Disarming 2 or 4 Chirps 2 or 3 Flashes Unlocking Turns on for 30 - sec 3. Trigger Alarming Flashes Slo w Flash Disable Flashes 4.
7 PASSIVE ARMING Active arming / disarming is controlling your security system via the remote transmitter. This security system is equipped with an optional Passive Arming feature, which allows the security system to arm 30 seconds after the last door is closed.
8 TWO STEPS DOOR UNLOCK : This feature will independently unlock the driver’s door only when disarming the security system. Pushing the button a second time within 3 seconds will unlock the other doors.
9 TRIGGER THE SYSTEM When armed, your vehicle is protected as follows: 1. Light impact will trigger the warn - away signal. 2. Heavy impacts / Doors open / Hood open / Trunk open / Turn on the ignition key will trigger the programmed sequence. The starter disable relay (if installed) prevents the vehicle’s starter from cranking.
10 SYSTEM’S STATUS CHECK (For two - way transceiver operation only) When you want to check the system’s present status through the LCD screen, Press the transceiver button twice, within 3 seconds press (C) button. It responds with one melody sound, the LCD screen should be illuminated.
11 CHANNEL 5 AUXILIARY CONTROL OUTPUT ( Available Option) Press the transmi tter + button to active Channel 5 function. Channel 5 is a programmable output. This feature, when installed with optional accessories, may be used to operate power windows, sunroofs, etc.
12 LCD REMOTE CONTROL TRANSCEIVER : Note: If the system is interfered by stronger radio frequency around, sources of high voltage electric power or such Obstacles like tall buildings and so on, the transmission range may get shorter as the system uses low out put powered frequency.
13 Door Open Warning Doors are illegally opened (Zone 3) Trunk/Hood Trigger Trunk or Hood is illegally opened (Zone 2) Shock Sensor Trigger Trigger on Shock Sensor (Zone 4) Warn Away trigger T rigger .
14 Screen Lamp ON: Press and hold the button one second, with one melody sound and the LCD screen lamp will turns on for 5 sec. Power Save Mode: While the power save mode, the LCD remote transceiver uses “0” current to save the battery power.
15 Set Up Fixed Count Down Timer: 1. Press the button first, within 3 seconds press and hold the ( ) button for two seconds, the LCD screen will shows icon and timer (ie. 0:10), 2. Press the ( ) button again showing next order time on the screen ( ie.
16 Timer Setting: Example to AM10:30 1. Press & hold the button for 3 seconds, with two - melody sound and the “Hours” digit flashes for adj usting. 2. Press the or button to decrease or increase the “Hour” digit until AM 10 : xx 3. Press the button once again then the “Minute” digit flashes for adjusting.
17 LIMITED LIFETIME WARRANTY PROVISIONS ( U.S . and Continental U.S. Only) 1. AutoPage, Inc. WARRANTS that this new unit has been thoroughly inspected and tested at the factory prior to delivery.
18 This WARRANTY CARD is for your record. However, AutoPage reserves the right to request you to submit this WARRANTY CARD, which must have complete information to receive warranty service.
19 1815 West 205 th Street Suite 101 Torrance, California 90501 - 1525 Main Office: 310 - 618 - 2002 Customer Service: 800 - 262 - 2527 Ext. 462 www.autopageusa.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Auto Page RF-520LCD è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Auto Page RF-520LCD - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Auto Page RF-520LCD imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Auto Page RF-520LCD ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Auto Page RF-520LCD, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Auto Page RF-520LCD.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Auto Page RF-520LCD. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Auto Page RF-520LCD insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.