Manuale d’uso / di manutenzione del prodotto CCC1370H-2X del fabbricante Pelco
Vai alla pagina of 16
CCC1370H-2, CCC1370H-2X, and MCC1370H-2 C1961M-E (8/03) ® INST ALLA TION/OPERA TION 1/3-Inch CCD Camera.
2 C1961M-E (8/03) CONTENTS Section Page IMPORT ANT SAFEGUARDS AND WARNINGS ..................................................................................... 3 REGULA TORY NOTICES ....................................................................
C1961M-E (8/03) 3 This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
4 C1961M-E (8/03) REGULA TORY NOTICES This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
C1961M-E (8/03) 5 DESCRIPTION The CCC1370H-2, CCC1370H-2X, and MCC1370H-2 digital cameras are high resolution, compact video cameras that feature a 1/3-inch CCD imager . Each camera’ s high resolution and high-density image sensor ensure a sharp and clear picture over a wide range of conditions.
6 C1961M-E (8/03) LOCA TION AND FUNCTION OF P ARTS Refer to Figure 1. Lens Mount The camera has a standard CS lens mount but can use a C-mount lens when a C/CS-mount adapter is installed between the lens and camera. Back Focus Lock Screw Loosen to adjust the back focus to match the lens attached to the CS mount.
C1961M-E (8/03) 7 Eclipser Function (NTSC/EIA Models Only) The eclipser function is used with an auto iris lens. When using a CCD imager with an auto iris lens in an area with minimal lighting contrasts, the auto iris lens closes, resulting in poor picture quality .
8 C1961M-E (8/03) CONNECTIONS POWER To connect to the power supply: 1. Strip at least .50 inch (13 mm) from the power cord to expose the wires. 2. Insert the three wires into the holes in the terminal strip until they snap into place. 3. Confirm that the cord is connected to terminal securely by lightly tugging on the cord.
C1961M-E (8/03) 9 LENS INST ALLA TION The CCC1370H-2, CCC1370H-2X, and MCC1370H-2 can use fixed, manual, or passive (DC- controlled) auto iris lenses. The camera has a standard CS lens mount but can use a C-mount lens when a C/CS-mount adapter is installed between lens and camera.
10 C1961M-E (8/03) BACK FOCUS ADJUSTMENT Do not release the back focus locking ring unnecessarily . Back focus adjustment has been set at the factory to the standard CS-mount back focus distance. However , once a lens is mounted it may be necessary to adjust back focal length to match the lens being used.
C1961M-E (8/03) 11 CAMERA SYNCHRONIZA TION The power supply of each camera is set to the same synchronized phase at the factory and usually does not need to be readjusted. When using more than one camera power supply , a brief vertical roll may occur on the monitor each time a camera view is switched.
12 C1961M-E (8/03) ECLIPSER ADJUSTMENT (NTSC/EIA MODELS ONL Y) The eclipser function is available only on NTSC and EIA models. It is set at the factory and usually does not need to be readjusted. However , if fine tuning is necessary , do the following: 1.
C1961M-E (8/03) 13 SPECIFICA TIONS GENERAL CCD Sensor: 1/3-inch interline transfer Picture Elements CCC1370H-2, MCC1370H-2: 768H x 494V (approx. 380K) CCC1370H-2X: 752H x 582V (approx.
14 C1961M-E (8/03) PELCO CCC1370H-2, CCC1370H-2X, and MCC1370H-2 T ested to Comply with FCC Standards FOR HOME OR OFFICE USE W ARRANTY AND RETURN INFORMA TION W ARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
C1961M-E (8/03) 15 REVISION HISTORY Manual # Date Comments C1961M 11/99 Original version. C1961M-A 3/01 Add information on model CCC1300H-2X. C1961M-B 3/01 Revised eclipser adjustment instructions. C1961M-C 12/01 Revised for enhanced imager; new model numbers.
World Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Pelco CCC1370H-2X è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Pelco CCC1370H-2X - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Pelco CCC1370H-2X imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Pelco CCC1370H-2X ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Pelco CCC1370H-2X, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Pelco CCC1370H-2X.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Pelco CCC1370H-2X. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Pelco CCC1370H-2X insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
