Manuale d’uso / di manutenzione del prodotto C1666M-A (4/06) del fabbricante Pelco
Vai alla pagina of 20
INST ALLA TION TW3001AR Active Receiver Single Channel for UTP T ransmiss ion C1666M-A (4/06).
.
C1666M-A (4/06) 3 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
4 C1666M-A (4/06) Regulatory Notices This device complies with Part 15 of the FCC Rule s. Operation is subject to the following two conditions: (1) this device may not cause harmful in terference, and (2) this device must accept any interference received, including interfer ence that may cause undesired operation.
C1666M-A (4/06) 5 Description The TW3001AR is a single-channel active receiver that can receive live video over unshielded twisted pair (UTP) cable. The adaptive technology in the TW3001AR automatical ly adjusts the low , medium and hig h frequency components of the video signal allowing for the best possibl e video transmission.
6 C1666M-A (4/06) PARTS OF THE RECEIVER Figure 1. TW3001AR Parts Rubber Feet (4): For placing unit on a flat surfac e, such as a desk or shelf. Status LED: Lights red when there is no UTP video bei ng received. Lights green when there is UTP video being received.
C1666M-A (4/06) 7 Installation Make sure all parts ar e present for the unit. 1 Universal power s upply (Part #PS04-1502-0512G) 1 Wall clip 1 2-pin power connector 1 2-pin UTP connector MOUNTING The TW3001AR receiver is 3 rack units hig h and can be mounted into a fiber rack, onto a wall using a fiber wall mount kit or in to the supplied wall clip.
8 C1666M-A (4/06) USING A W ALL CLIP T o attach the TW3001AR receiver to a wall using t he supplied wall clip, refer to Figure 2 and do the following: 1.
C1666M-A (4/06) 9 SETTING THE DIP SWITCHES Y ou can override the adaptive technology by m anually adjusting switches 1 through 4 on the D IP Switch. The factory default switch positions are s hown in Figure 3. Switches 1 through 4 are set to AUTO and Switch 5 is set to H MODE (high mode).
10 C1666M-A (4/06) APPLICATIONS Y ou can connect the TW3001AR active receiver to transmitters, such as the TW3001P passive trans- ceiver and the TW3001A T active transmitter , and to Pelco UTP ca meras, such as the CC3710/CC3610 Series.
C1666M-A (4/06) 11 Figure 4 shows a TW3001AR connected to a UTP Camclosure ® . Figure 4. TW3001AR Connected to a UTP Camclosure + - CAMCLOSURE TW3001AR UTP MONITOR 12 VDC OR 24 VAC POWER SUPPLY BLUE .
12 C1666M-A (4/06) Figure 5 shows a TW3001AR connected to a UTP fixed camera. Figure 5. TW3001AR Connected to a UTP Fixed Camera + - TW3001AR FIXED CAMERA 8 PINS (4-/5+) MONITOR UTP PIN 5 + PIN 4 - 10.
C1666M-A (4/06) 13 Figure 6 shows a TW3001AR connected to a UTP Spectra ® Dome for Coaxitron PTZ control. Figure 6. TW3001AR Connected to a Spectra Dome + - TW3001AR UTP VIDEO COAXITRON SPECTRA MONIT.
14 C1666M-A (4/06) Figure 7 shows a TW3001AR connected to a TW 3001P passive transceiver . The TW3001P then connects to a non-UTP fixed camera. Figure 7.
C1666M-A (4/06) 15 Figure 8 shows a TW3001AR connected to a TW3032P passive transceiver . Figure 8. TW3001AR Conn ected to a 32-Channel Passive T ransceiver + - TW3001AR TW3032P MONITOR UTP 12 VDC OR .
16 C1666M-A (4/06) Figure 9 shows a TW3001AR connected to a TW 3004P passive transceiver . The TW3004P then connects to a non-UTP fixed camera. Figure 9.
C1666M-A (4/06) 17 Specifications ELECTRICAL Input V oltage 12 VDC or 24 V AC, 50-60Hz Power Consumption 2.5 W Wire T ype Unshielded twis ted pair (24 AWG maximum) Wire Category Cat3 or better DC Loop.
18 C1666M-A (4/06).
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merc handise proved defective in materi al or workma nship for a period of one year after the date of shipment.
Worl dwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Pelco C1666M-A (4/06) è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Pelco C1666M-A (4/06) - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Pelco C1666M-A (4/06) imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Pelco C1666M-A (4/06) ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Pelco C1666M-A (4/06), ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Pelco C1666M-A (4/06).
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Pelco C1666M-A (4/06). Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Pelco C1666M-A (4/06) insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
