Manuale d’uso / di manutenzione del prodotto Z5710 del fabbricante Aspire Digital
Vai alla pagina of 206
Aspire Z5700/Z5710 Series Service Guide PRINTED IN T AIW AN Service guide files and updates are availab le on the ACER/CSD web; for more information, please refer to http://csd.
II Revision History Please refer to the table below for the updates ma de on this service guide. Date Chapter Up dates.
III Copyright Copyright © 2010 by Acer Incorporated. All rights rese rved. No part of this pub lication may be reproduce d, transmitted, transcribed, stored in a retrieval system, or translated into .
IV Conventions The following conventi ons are used in this manual: NOTE: This symbol where placed in th e Serv ice Gu id e des ig nates a compo nent that s hould be recycled a ccording to t he local re gulations. SCREEN MESSAGES Denotes actual messages that appear on screen.
V Preface Before using this information and the product it s upports, please read the fo llow ing general informati on. 1. This Service Guide provides you with all techni cal information relating to the BASIC CON FIGUR A TION decided for Acer's "glo bal" product offering.
VI.
VII T able of Contents System Specifications 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 System Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . .
VIII T able of Contents Removing the Thermal Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Removing the Fans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Removing the CPU .
IX T able of Contents Jumper and Connector Locations 175 Mainboard Top View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 75 BIOS Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
X T able of Contents.
Chapter 1 1 System Specifications Features Below is a brief summary of the computer ’s many features: Operating system • Genuine Windows® 7 Home Premium (T ouch Pack) Processor Z5710 • Intel® Core™ i7-860/i7 -870 processor (8 MB L3 ca che, 2.
2 Chapter 1 Graphics Z5710 • NVIDIA® GeForce® G210M with 512 MB of dedicated DDR3 VRAM, supporting NVIDIA® CUDA™, PhysX™, PureV ideo® HD technology , OpenEXR High Dynamic-Range (HDR) technology , Shader Model 4.0, Micr osoft® DirectX® 10.1, OpenGL® 3.
Chapter 1 3 Optical drive 4X Blu-ray Disc™ Reader / DVD-Su per Multi double-layer drive: • Read: 48X CD-R OM, 48X CD-R, 48 CD-RW , 16X DVD -ROM, 16X DVD-R, 16X DVD+R, 8X DVD- ROM DL, 8X DVD-R DL, .
4 Chapter 1 Communication •W L A N : • 802.1 1 b/g Wi-Fi CERTIFIED™ • 802.1 1 b/g/n Wi-F i C E R TIFIED™ •W P A N : • Bluetoo th® 2.1 + EDR •L A N : • Gigabit Ethernet • Built-in 1 MP high-def webcam with 1280 x 800 resolution image capture • Built-in microphone I/O ports Side: • Multi-in-1 card reader • T wo USB 2.
Chapter 1 5 Software • Productivity: • Acer T ouch Suite • Adobe® Reader® •e S o b i ™ • Microsoft® Office 2007 T rial with Micro soft® W orks • Microsoft® T ouch Pack (Microsof t®.
6 Chapter 1 System Block Diagram Processor Lynnfield/ 64-bit/45nm LGA1156 (37.5x37.5mm) DMI x4 Ibex Peak PCH PCIE 2.0 x16(PEG) PECI Clarkdale FDI (*1) MXM CNN Mobile PCI-E Module (Graphics) TYPE-A(or B) (285 pin) LVDS Transmitter Chrontel CH7308 LQFP64 SDVOB LVDS (27x27mm) FCBGA951 SATA II SATA HDD(3.
Chapter 1 7 Your Computer tour This section describes port loca ti ons, indicators, and controls for the co mputer . IMPORT ANT : Y our computer ’s hardware options , port location s, and indicators may vary from this illustration.
8 Chapter 1 Right View IMPORT ANT : Y our computer ’s hardware options , port location s, and indicators may vary from this illustration. No. Component Icon Description 1 Headphone jack (white plug) Plug powered, analog front speakers, an external amplifie r , or headphones into this jack.
Chapter 1 9 Left View IMPORT ANT : Y our computer ’s hardware options , port location s, and indicators may vary from this illustration. No. Component Icon Description 1 B-CAS reader Subscription service availa ble for select models only .
10 Chapter 1 Rear View IMPORT ANT : Y our computer ’s hardware options , port location s, and indicators may vary from this illustration. No. Component Icon Description 1 Power connector Plug the power cord into this connector . 2 Kensington™ lock slot Secure your computer to an object by connecting a Kensington cable lock to this slot.
Chapter 1 11 Using the Keyboard The keyboard h as several different types of keys and buttons as sho wn below . Feature Icon Description Function keys Press these keys to start program actions. Each program uses different function keys for differ ent purposes.
12 Chapter 1 Windows Keys The keyboard has two keys that perform Wi ndow s-specific functions. Key Description Windows key Pressed alone, this key ha s the same effect as clicking on the Windows St art button; it launches the S tart menu.
Chapter 1 13 Hardware Specifications and Configurations Processor Chip set Item Specification CPU type* • Intel® Core2™ Duo processor • Intel® Co re ™2 Qu a d pr oce sso r • Pentium® dual-core Processor *Dependent on mo del shipped.
14 Chapter 1 Processor Specifications BIOS System Memory Processor CPU Spe e d Cores Bus Speed Power Cache Size Package Acer P/N i3 530 2.93G 2 1333 73W 4M FCBGA KC.53001.CI3 i3 540 3.06G 2 1333 73W 4M FCBGA KC.54001.CI3 i5 650 3.2G 2 1333 73W 4M FCBGA KC.
Chapter 1 15 Memory Combinations Above table list s some system memory configurations. Y ou may combine DIMMs with various capacities to form other combinations .
16 Chapter 1 Hard Disk Drive Interface Hard Disk Drive Interface (continued) Item Specifications V endor & Mo del Name Hitachi HDT721016SLxxx HCT721016SLxxx HDT721025SLxxx HCT721025SLxxx HDT721032.
Chapter 1 17 Hard Disk Drive Interface (continued) Vid eo I nt e rf ac e VRAM Audio Interface Item Specifications V endor & Mo del Name Western Digital , WD3200AAJS, WD2500AAJS, WD1600AAJS, WD800A.
18 Chapter 1 Keyboard Contro ll er Bluetooth TV T u ne r VGA Controller HDMI Port- Not availabl e with this model Item Specification Controller IT8512E/NX-L embedded T ota l number of keypads Windows logo key Hotkeys Item Specification Chipset Broadcom BCM2046, Bluetooth2 .
Chapter 1 19 LCD 23” LCD Display Supported Resolution Item Specification V endor/model name Samsung L TM230HT01-A05 LT M 2 3 0 H T 0 1 LG LM230WF1 Screen Diagonal (mm) 584.2 Active Area (mm) 509.76 x 286.74 Display resolution (pixels) 1920 x 1080 Pixel Pitch 0.
20 Chapter 1 Power Supply RTC Battery AC Adaptor 1366x768 Y N N N 1400x900 Y N N N 1400x1050 Y N N N 1600x900 Y N Y N 1600x1024 N N Y N 1680x1050 Y N Y N 1920x1080 Y N Y N Item Specif ications AC Input • Auto ranging from 100V to 240V and 50Hz to 60Hz DC Output • 5V , 40W; 3.
Chapter 1 21 System Power Manag ement Item Specification Mech. Off (G3) Al devices in the system are turned off completely . Working (G0/S0) Individual devices such as the CPU and hard disc may be power managed in this state.
22 Chapter 1.
Chapter 2 23 System Utilities BIOS Setup Utility The BIOS Setup Utility is a hardware configuration prog ram built into y our computer ’s BIOS (Basic Input/ Output System). Y our computer is already properly configu red and optimi zed, and you do not need to run this utility .
24 Chapter 2 CMOS Setup Utility The CMOS Setup Utility screen disp l ays a list of the functions and features available in the BIOS. Use the arrow keys to scroll to the required me nu and press Enter . CMOS Setup Utility - Copyright (C) 1985-2010, American Megatrends Inc.
Chapter 2 25 Product Information The Product Information screen displays a summary of the computer hardware information. NOTE: The system information is su bject to diff erent models. Parameter Description Processor T ype This field shows the system processor type.
26 Chapter 2 Standard CMOS Features The S t andard CMOS Features screen allows the user to set the system ti me and date as well as set HDD and ODD options. NOTE: The screen above is for your reference only . Actua l values may differ . The table below describes the parameters in this screen.
Chapter 2 27 Advanced BIOS Features The Advanced BIOS Features scr een allows configu r ati on of the various advanced BIOS options. The table below describes the items, me nus, and submenus in this screen. Parameter Description Format/Opti on Quick Boot Allows BIOS to skip certain steps while booting.
28 Chapter 2 Advanced Chipset Features The Advanced Chipset Features screens. The table below describes the items, me nus, and submenus in this screen. Parameter Description Format/Opti on Intel XD Bit When disabled this forces the XD feature flag to always return to 0.
Chapter 2 29 Integrated Peripherals The Integrated Peripherals screen con tains parameters for device peripherals. The table below describes the items, me nus, and submenus in this screen.
30 Chapter 2 Power Management Features The Power Management Fea tures screen contains parameters used for device power management. The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.
Chapter 2 31 PC Health The PC Health screen disp lays CPU/Chipset temperatur e informatio n and contains customizable safety monitors for the CPU. The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.
32 Chapter 2 Frequency Voltage Control The Frequency V oltage Contro l Screen to set memory and processor parameters. The table below describes the parameters in this screen.
Chapter 2 33 BIOS Security Features The BIOS Security Features screen contains parameters that help safegua rd and pr otect your comp uter from unauthorized use. The table below describ es the parameters in this screen. NOTE: When prompted to enter a password, only three trie s are allowed before the system halts.
34 Chapter 2 Setting a Password Follow these steps as you set the user or the supervisor p assword: 1. Use the and keys to highlight the Set Supe rvi sor Password parameter and press the Enter key . The Set Supervisor Password box appears: 2.
Chapter 2 35 Changing a Password 1. Use the and keys to highlight the Set Supe rvi sor Password parameter and press the Enter key . The Set Password box appears. 2. T ype the current p a ssw or d in the Enter Curren t Pa ssw or d field and pr ess Enter .
36 Chapter 2 BIOS Flash Utilities The BIOS flash memory upd ate is required for th e following conditions: • New versions of system programs • New features or options • Restore BIOS when it b ecomes co rrupted.
Chapter 2 37 DOS Flash Utility Perform the following steps to use the DOS Flash Utility: 1. Copy the flash utilities to the bootable device. 2. Attach the device to the system and restart.
38 Chapter 2 Win Flash Utility Perform the following steps to use the WinFlash Utility: 1. Open the S tart menu and type CMD to open command mode. 2. T ype “fbbwin64” to fl ash BIOS. The process will start automatically . IMPORT ANT : During the flash process the keybo ard and mouse will not function.
Chapter 2 39 Using DMI Tools Use QDMI30A to change the asset tag, product name, or serial nu mber of the machine. 1. Copy the file qdmi 30a.exe to USB flash disk w ith bootable diskette or USB drive. 2. Press F2 during boot to enter the Setup Menu. 3.
Chapter 3 40 Machine Disassembly and Replacement WARNING:Thi s comp uter has two hi ghly sen sitiv e touchscreen sen sors on the top left and righ t corners of the LCD. The sensors are an integral part of the LCD and can no t be separately replaced. The se nsors are exp osed as soon as the rear c over is remov ed.
41 Chapter 3 M2.5*5.0-I(BNI)(NYLOK)IRON 3 86.G8507.005 M3*4-I(NI)(NYLOK)IRON 4 86.G8507.006 6-32UNC*5-B(NYLOK)IRON 4 86.G8507.007 M2.0*2.5-I (BNI,NYLOK)IRON 4 86.
Chapter 3 42 Disassembly Process Disassembly Flowchart Re mov e Inverter Board Re mov e HDD Module Turn off power and disconnect al l cabl es b ef ore pro ceedi ng Re mov e Stand Assem bl y Re mov e R.
43 Chapter 3 Screw List Step Screw Quantity S tand Cover M2.5*4 2 S tand Hinge M4*6 Ni 4 Rear Cover M2.5*7 4 Audio Board M2.5*4 Ni 2 HDD M2.5*4 Ni 2 HDD Bracket M3*4 Ni 4 ODD M2.5*4 Ni 2 ODD Brackets M2*2.5 Ni 4 Inverter Board M2.5*4 Ni 2 T ouchscreen Control Boa rd M 2.
Chapter 3 44 Removing the RAM Covers 1. See “Pre-disassembly Instructions” on page 40. 2. Apply pressure to one end of the RA M Cove r , while pulling up with the opposite hand as shown. 3. Lift the RAM Cover clear of the device. 4. Grasp the Hinge Cover with both hands.
45 Chapter 3 5. Lift the Hinge Cover clear of the device..
Chapter 3 46 Removing the RAM 1. See “Removing the RAM Covers” on page 44 2. Lift the RAM Shielding clear of the device. 3. Unlock the latches on either side of the RAM by pressing down as shown. There is an audible click when the latch is unlocked.
47 Chapter 3 Removing the Rear Covers 1. See “Removing the RAM” on page 46 2. Remove the six (6) screws that secure the Rear Covers. 3. Use both hands to gently pu sh the rear cover outward from the device as shown. 4. Repeat the previous step for the remaining rear cover .
Chapter 3 48 Removing the Back Cover 1. See “Removing the T o uchscreen Control Board” on page 59 2. Remove the fourteen (14) screws securing the Back Cover . 3. Use both hands to move the Hinge up into the stand posi ti on. There is an audible click whe n the Hinge i s locked in position.
49 Chapter 3 4. Place one hand firmly on the Back Cover . Use the oppos ite hand to pry the Bezel away , working from one corner to the other as shown. Repeat this step until al l guide s along the bottom of the device are unlocked. 5. Place one hand firmly on the Hinge.
Chapter 3 50 Removing the Hinge 1. See “Removing the Back Cover” on page 48 2. Replace the Hinge to the carry position. 3. Remove the six (6) screws securing the Hinge.
51 Chapter 3 Removing the Mainboard Shielding 1. See “Removing the Audio Board” on page 63. 2. See “Removing the T o uchscreen Control Board” on page 59. 3. Remove the one (1) screw from the ground wire. 4. Remove the small power cable from the mainboard.
Chapter 3 52 5. Detach the power cable from the mainboard. 6. Remove the adhesive tape holding the HDD ground cable to the HDD. 7. Remove the one (1) screw from the ground wire.
53 Chapter 3 8. Disconnect the HDD cable. 9. Remove the power cable from the HDD. 10. Remove the six (6) screws. Ste p Size Quantity Screw T ype Mainboard Shielding M2.
Chapter 3 54 11 . Lift the main board shielding away from the chassis..
55 Chapter 3 Removing the Hard Disk Drive 1. See “Removing the Back Cover” on page 48. 2. Disconnect the HDD cable. 3. Remove the two (2) screws. Ste p Size Quantity Screw T ype HDD M2.
Chapter 3 56 4. Slide the HDD towards the sp eakers to release it from the flanges. 5. Lift the HDD out of the chassis. 6. Remove the four (4) screws from the HDD bracket (bot h sides).
57 Chapter 3 7. Remove the brackets from the HDD..
Chapter 3 58 Removing the Power Supply 1. See “Removing the Hinge” on page 50 2. Remove two (2) screws securing the Power Supply as shown. 3. Lift the Power Supply clear of the device.
59 Chapter 3 Removing the Touchscreen Control Board 1. See “Removing the Back Cover” on page 48 2. Remove the one (1) gro und cable screw . 3. Disconnect the right (top in this image) touch sensor cable . Ste p Size Quantity Screw T ype T ouchscreen Control Board M2.
Chapter 3 60 4. Disconnect the left (bottom in this image) touch se nsor cable. 5. Disconnect the touchscreen board to mainboard cable. 6. Remove the two (2) screws.
61 Chapter 3 7. Lift the touchscreen board away ..
Chapter 3 62 Removing the Card Reader Board 1. Disconnect the Card reader cabl e. 2. Remove the two (2) screws. 3. Lift the card reader board away . Step Size Quantity Screw T ype Card Reader Board 2.
63 Chapter 3 Removing the Audio Board 1. See “Removing the Back Cover” on page 48. 2. Disconnect the Audio board cable. 3. Remove the two (2) screws from the audio board.
Chapter 3 64 4. Lift the audio board and cable away at an angle from the rear cover ..
65 Chapter 3 Removing the ODD Eject Board 1. See “Removing the Back Cover” on page 48 2. Disconnect the ODD Eject Board Cable. 3. Remove the one (1) screw from the ODD eject board.
Chapter 3 66 4. Remove the ODD Eject Board..
67 Chapter 3 Removing the ODD 1. See “Removing the Back Cover” on page 48. 2. Remove the two (2) screws. 3. Slide the ODD assembly ou t. Ste p Size Quantity Screw T ype ODD M2.
Chapter 3 68 4. Lift the ODD away from the chassis. 5. Remove the two (2) screws from the si de bracket and remove the bracket. Ste p Size Quantity Screw T ype ODD Side Bracket M2*2.
69 Chapter 3 6. Remove the two (2) screws from the ODD rear bracket and remove the bracket. Ste p Size Quantity Screw T ype ODD Rear Brac ket M2*2.5 2.
Chapter 3 70 Removing the Inverter Board 1. See “Removing the Back Cover” on page 48. 2. Remove the adhesive covering the Inverte r Board cable 1. 3.
71 Chapter 3 5. Disconnect the LCD to Inverter Bo ard cable 2. 6. Disconnect the mainboard to inverter cable. 7. Remove the two (2) screws from the inverter board.
Chapter 3 72 8. Remove the Inverter Board..
73 Chapter 3 Removing the Home Button Board 1. See “Removing the Back Cover” on page 48 2. Disconnect the Home Bu tton board cable. 3. Remove the one (1) screw from the Home Button Board Ste p Size Quantity Screw T ype Home Button Board M2.
Chapter 3 74 4. Remove the Home Button Board from the chassis..
75 Chapter 3 Removing the Camera Module 1. See “Removing the Back Cover” on page 48 2. Remove the two (2) screws from the Camera Module 3. Lift the Camera Module ou t of the chassis.
Chapter 3 76 4. T urn the Camera Module over . 5. Disconnect the cable from the Camera Modu le..
77 Chapter 3 Removing the TV Tuner Module 1. See “Removing the Card Reader Board” on page 62. 2. Disconnect the TV Tuner antenna. 3. Remove the one (1) screw .
Chapter 3 78 4. Lift the TV module away ..
79 Chapter 3 Removing the Wireless LAN Module 1. See “Removing the Card Reader Board” on page 62. 2. Disconnect the WLAN antennas. 3. Remove the one (1) screw from the WLAN module.
Chapter 3 80 4. Lift the WLAN module away ..
81 Chapter 3 Removing the Thermal Module 1. See “Removing the Thermal Module ” on page 81. 2. Disconnect the two (2) fa n cables. 3. Loosen the four (4) captive screws in nume rical order (1, 2, 3, then 4).
Chapter 3 82 Removing the Fans 1. See “Removing the Thermal Module ” on page 81. 2. Remove the two (2) screws. 3. Remove the L VDS cabl e from the ca ble clips.
83 Chapter 3 4. Remove the fan. 5. Remove the two (2) screws. 6. Remove the fan. Ste p Size Quantity Screw T ype Fan 2.5*5 2.
Chapter 3 84 Removing the CPU 1. See “Removing the CPU” on page 84. 2. Unlock the CPU by pressin g down on the locking latch and mo ving it out and away from the CPU. 3. Lift the CPU out of the p ackage. CAUTION: Avoid any cont act with a thermal pad or thermal grease.
85 Chapter 3 Removing the Mainboard 1. See “Removing the Card Reader Board” on page 62. 2. See “Removing the Thermal Module ” on page 81. 3. See “Removing the CPU” on page 84. 4. Disconnect the sixteen (16) cables from the Mainboard a s shown.
Chapter 3 86 5. Remove the adhesive tabs holding the Audio board cable to the ma inboard. 6. Remove the two (2) screws. Ste p Size Quantity Screw T ype Mainboard M2.
87 Chapter 3 7. Lift the mainboard away . NOTE: Circuit boards >10 cm² hav e been highlighted with a yellow rect angle as shown in the previous image. Please det ach the Circuit bo ard and follow local regulations fo r disposal. 8. Disconnect the IR Board cable and remove.
Chapter 3 88 9. Open cable clips as shown. Remove all cables from cable clips. NOTE: Make note of the location which cables bel ong in which clip before re moving them.
89 Chapter 3 Removing the Frame 1. See “Removing the Mainboard Shie lding” on page 51. 2. See “Removing the T o uchscreen Control Board” on page 59. 3. See “Removing the Mainboard” on page 85. 4. See “Removing the Frame” on page 89. 5.
Chapter 3 90 8. Unlock the L VDS cable. 9. Remove the L VDS cabl e..
91 Chapter 3 10. Remove the adhesive tape from the sen sor cables. 11 . Remove the two (2) sensor conne ctors..
Chapter 3 92 12. Remove the adhesive tape covering the TBD cable and remove. 13. Remove the adhesive tape covering the inverter cable..
93 Chapter 3 14. Remove the thirteen (13) screws. Ste p Size Quantity Screw T ype Frame M2.5*4 13.
Chapter 3 94 15. Lift the LCD bracket clear of the bezel. W ARNING: When lifting the L CD Assembly , do not touch the T o uch sensor modules lo cated at the top le ft and top right corners of the device. Doing so will damage the touch screen functi on.
95 Chapter 3 Removing the LCD Panel 1. See “Removing the Frame” on page 89. 2. Remove the four (4) screws from the LCD assembly . 3. Lift the edge of the LCD bracket and pass the converter cables through.
Chapter 3 96 4. Lift the LCD bracket aw ay from the LCD assembly . IMPORT ANT : The touchscreen control board and LCD panel must be returned together for RMA p urposes. See “Removing the T o uchscreen Co ntrol Bo ard” on page 59. The touchscree n control board record s the specific panel’s dat a, do not separate these for RMA.
97 Chapter 3 Removing the Bluetooth Module 1. See “Removing the Bluetooth Modu le” on page 97. 2. Lift the Bluetooth mo dule off of the bezel. 3. Disconnect the Bluetooth cable.
Chapter 3 98 Removing the IR Board 1. See “Removing the Frame” on page 89. 2. Disconnect the home button board cable. 3. Remove the one (1) screw .
99 Chapter 3 4. Remove the home button board from the bezel..
Chapter 3 100 Removing the Home Button Board 1. See “Removing the Frame” on page 89. 2. Lift the power board away from the bezel..
101 Chapter 3 Removing the USB Board 1. See “Removing the Back Cover” on page 48. 2. Remove the adhesive tape covering the USB cable. 3. Remove the two (2) screws.
Chapter 3 102 4. Remove the USB board from the chassis..
103 Chapter 3 Removing the Speakers 1. See “Removing the Frame” on page 89. 2. Remove the adhesive tape from the speaker cable. 3. Remove the speaker cable from the LCD bezel. 4. Remove the adhesive tape from the speaker assembly . 5. Lift the speakers away from the bezel.
Chapter 3 104 Removing the Antennas 1. See “Removing the Frame” on page 89. 2. Remove the two (2) screws. 3. Remove the left and right antennas from the bezel.
105 Chapter 3 Reassembly Procedure Replacing the Antennas 4. Replace the left and right antennas onto the bezel. 5. Replace the two (2) screws. Ste p Size Quantity Screw T ype Antennas M1.
Chapter 3 106 Replacing the Speakers 1. Place the speakers onto the LCD bezel and apply the adhesive tape to secure the assembly . 2. Place the speaker cable onto the LCD bezel.
107 Chapter 3 Replacing the USB Board 1. Place the USB board o nto the LCD bezel. 2. Replace the two (2) screws. 3. Replace the adhesive tape to secure the USB cable.
Chapter 3 108 Replacing the IR Board 1. Place the IR board into the LCD bezel. 2. Apply pressure to set the adhesive..
109 Chapter 3 Replacing the Home Button Board 1. Place the home button board onto the LCD bezel. 2. Replace the one (1) screw . Ste p Size Quantity Screw T ype Home Board M2.
Chapter 3 11 0 3. Connect the home b utton board cable. Replacing the Bluetooth Module 1. Connect the Bluetooth cable to the Bluetooth Module. 2. Adhere the Bluetooth module to the be zel.
111 Chapter 3 Replacing the LCD Panel in the Frame 1. Replace the LCD panel onto the frame. 2. Lower the edge of the LCD bracket and pass the converter cables through.
Chapter 3 11 2 3. Replace the four (4) screws from the LCD assembly . Ste p Size Quantity Screw T ype LCD Panel M3*4 4.
11 3 Chapter 3 Replacing the Frame 1. Place the bezel around a raised surface so th at the bezel is lower than the raised s urface. L ower the LCD Assembly onto the bezel.
Chapter 3 11 4 3. Replace the adhesive tape to secure the inverter cable. 4. Replace the adhesive tape to secure the TBD cable. 5. Replace the right and left sensor connectors.
11 5 Chapter 3 6. Replace the adhesive tape to secure the sensor cables . NOTE: There is tape on b oth the top and side of the LCD bracket. 7. Connect the L VDS cable.
Chapter 3 11 6 8. Lock the L VDS cable. 9. Adhere the L VDS connector pr otective cover . 10. Replace the adhesive tape holding the L VDS cable to the LCD bracket.
11 7 Chapter 3 Replacing the Mainboard 1. Replace all cables into the cable clips and lock them. TBD 2. Connect the IR Board cable..
Chapter 3 11 8 3. Place the mainboard o nto the chassis. 4. Replace the two (2) screws. 5. Replace the adhesive tabs to secure the Audio board cable to the ma inbo ard.
11 9 Chapter 3 6. Connect the following sixteen (16) cables to the Ma inb oard as shown. Item Description 1 L VDS Cable 2 CCD Cable 3 Inverter Cable 4M I C C a b l e 5 ODD Button Cable 6 Card Reader C.
Chapter 3 120 Replacing the CPU 1. Place the CPU paying attention to the locating triangle. NOTE: Ensure the CPU is lined up w ith the Pin1 Socket lo cator on the mainboard.
121 Chapter 3 Replacing the Fans 3. Replace the right fan. 4. Replace the two (2) screws. 5. Replace the left fan. Ste p Size Quantity Screw T ype Fan 2.
Chapter 3 122 6. Place the L VDS cable into the cable clips. 7. Replace the two (2) screws. Ste p Size Quantity Screw T ype Fan 2.5*5 2.
123 Chapter 3 Replacing the Thermal Module 1. Place the thermal module on to the mainboard. 2. T ighten the four (4) captive screws in reverse numerical order (4, 3, 2, then 1).
Chapter 3 124 Replacing the WLAN Module 1. Replace the WLAN module. 2. Replace the one (1) screw . 3. Replace the two (2) connectors. The black ca b le is placed closest to the DIMM slots.
125 Chapter 3 Replacing the TV Tuner Module 1. Place the TV Tuner module into the connector . 2. Replace the one (1) screw . 3. Connect the TV Tuner cable.
Chapter 3 126 Replacing the Camera Module 1. Connect the camera cable to the Camera Module. 2. T urn the Camera Module over . 3. Place the Camera Module on to the chassis.
127 Chapter 3 4. Replace the two (2) screws to secure the Camera Module Ste p Size Quantity Screw T ype Camera Module M2.0*3 2.
Chapter 3 128 Replacing the Power Board 1. Place the Pow er Board on to the cha ssis. 2. Replace the one (1) screw . 3. Connect the Home Button board cable.
129 Chapter 3 Replacing the Inverter Board 1. Place the Inverter Board onto the chassis. 2. Replace the two (2) screws to secure the inverter board. 3.
Chapter 3 130 4. Connect the LCD to Inverter Bo ard cable 2. 5. Lock the cable clasp. 6. Connect the LCD to Inverter Bo ard cable 1..
131 Chapter 3 7. Apply the adhesive tape to secure the Inverter Board cable 1..
Chapter 3 132 Replacing the ODD Module 1. Replace the rear ODD bracket an d re place the two (2) screws. 2. Replace the side ODD bracket and replace the two (2) screws. Ste p Size Quantity Screw T ype ODD Rear Brac ket M2*2.5 2 Ste p Size Quantity Screw T ype ODD Side Bracket M2*2.
133 Chapter 3 3. Place the ODD onto the chassis. 4. Slide the ODD assembly into place. 5. Replace the two (2) screws. Ste p Size Quantity Screw T ype ODD M2.
Chapter 3 134 Replacing the ODD Eject Board 1. Place the ODD Eject Board onto the chassis. 2. Replace the one (1) screw to secure the ODD eject board. 3.
135 Chapter 3 Replacing the Audio Board 1. Place the audio board onto the chassis. 2. Connect the two (2) screws to secure the audio board. 3. Connect the Audio board cable.
Chapter 3 136 Connect the Card Reader Board 1. Place the card reader b oard onto the cha ssis. 2. Replace the two (2) screws. 3. Connect the Card R eader Board ca ble.
137 Chapter 3 Replacing the Touchscreen Board 1. Place the touchscreen board onto the chassis. 2. Replace the two (2) screws. 3. Connect the touchscreen board to mainboard cable.
Chapter 3 138 4. Connect the left (bottom) touch sensor cable. 5. Connect the right (top) touch sensor cable. 6. Replace the one (1) ground cable screw .
139 Chapter 3 Replacing the Power Supply 1. Place the Power Supply onto the chassis. 2. Replace two (2) screws to secure the Power Supply as shown. Ste p Size Quantity Screw T ype Power Supply M2.
Chapter 3 140 Replacing the HDD 1. Replace the HDD brackets. 2. Replace the four (4 ) screws to secure the H DD bracket (both sides). 3. Place the HDD on to the chassis.
141 Chapter 3 4. Slide the HDD away from the speakers to secure it. 5. Replace the two (2) screws. 6. Connect the HDD cable. Ste p Size Quantity Screw T ype HDD M2.
Chapter 3 142 Replacing the Mainboard Shielding 1. Replace the shield onto the assembly . 2. Replace the six (6) screws. Ste p Size Quantity Screw T ype Mainboard Shielding M2.
143 Chapter 3 3. Connect the HDD power cable. 4. Connect the HDD cable to the mainboard. 5. Replace the one (1) screw to secure the g round wire. Ste p Size Quantity Screw T ype Convert er Ground Cable M2.
Chapter 3 144 6. Adhere the adhesi ve tape to secure the HDD gro und cable to the HDD. 7. Connect the power cable to the mainboard. 8. Connect the TBD wire to the mainboard.
145 Chapter 3 9. Connect the one (1) screw to secure the ground wire. Ste p Size Quantity Screw T ype HDD Ground Cable M2.5*4 1.
Chapter 3 146 Replacing the Hinge 1. Place the Hinge onto the chassis. 2. Replace the six (6) screws to secure the Hinge. Ste p Size Quantity Screw T ype Hinge M4*8 6.
147 Chapter 3 Replacing the Rear Cover 3. Place the Back Cover on to the device. 4. Press down firmly to engage the locking clips beneath the cover . 5.
Chapter 3 148 6. Remove the fourteen (14) screws securing the Back Cover . Ste p Size Quantity Screw T ype Back Cover 2.5*8 2.4*8.
149 Chapter 3 Replacing the Rear Covers 1. Place the first Rear Cover onto the Back Cover and slide it into plac e. 2. Repeat for the second Rear Cover .
Chapter 3 150 3. Replace the six (6) screws to secure the Rear Covers. Ste p Size Quantity Screw T ype Rear Covers M2.5*6.0 6.
151 Chapter 3 Replacing the RAM 4. Place each RAM module into its slot. 5. Lock the latches on either side of the RAM by pressing inwards as shown. 6. Place the RAM Shielding onto the device.
Chapter 3 152 Replacing the Rear Covers 1. Place the Hinge Cover onto the device. 2. Apply pressure to engage the Hi nge Cover latch es. 3. Place the RAM Cover onto the device.
153 Chapter 3 4. Slide the RAM Cover into place..
Chapter 4 154 Troubleshooting Common Problems Use the following procedure as a gui de for computer problems. NOTE: The diagnosti c tests are intended to test only Acer products. Non-Acer products, prototype cards, or modified options can give false e rrors and invalid system responses.
155 Ch apter 4 ODD Failure If an Optical Disk Drive failure is dete rmined, use th e following flowcha rt to determine the required action: ODD Not Operating Correctly If the ODD exhibits any of the f.
Chapter 4 156 b. Double-click DVD/C D-RO M d rives . If the device displays a down arrow , right-click on the device and click Enable . c. Check that ther e are no yellow excl amation marks against the items in l D E ATA / ATA P I c o n t r o l l e r s .
157 Ch apter 4 c. Click Properties and select the Advanced Settings tab. Ensure that the Enable DMA box is checked and click OK . d. Repeat for the other A T A Devices shown if applicable. Drive Not Detected If Windows cannot detect the drive, perform the foll owing actions one at a time to correct the problem.
Chapter 4 158 Wireless Failure If the wireless functionality fails, use the foll owing flowchart to determi ne the required action: START Check WL AN cable con necti on Wirel ss function fai lu re Rec.
159 Ch apter 4 Camera Failure If the camera functiona lity fails, use the followin g flowch art to determine the required a ction: START Check cam era cable con necti on Camera function fai lu re Reco.
Chapter 4 160 Speaker Failure If the internal speaker fails, use the follow ing flowcha rt to determine the required action: Sound Problems If sound problems are experienced, p erform the following actions one at a time to correct the problem. 1. Reboot the computer .
161 Ch apter 4 9. Restore system and file settings from a k nown good date using System Restore . If the issue is not fixed, repeat the prec eding steps and select an earlier ti me and date. 10. Reinstall the Operating System. 11 . If the Issue is still not resolved, see “Online Support Information” on page 192.
Chapter 4 162 LCD Failure If the integrated LCD display fails, use the fo llowing flowchart to determine the required action: No POST or Video If the POST or video doesn’t display , perform the foll owing actions one at a time to correct the problem.
163 Ch apter 4 Abnormal Video Display If video displays abnormally , perform the following actions one at a time to correct the problem. 1. Reboot the computer . 2. If permanent vertical/horizon tal lines or dark spots display in the same location, the LCD is faulty and should be replaced.
Chapter 4 164 General Troubleshooting Issues Computer Shutsdown Intermittently If the system powers off at intervals, perform the fo llowing actions one at a time to correct the problem. 1. Check the power cable is properly connected to the computer and the electrical outlet.
165 Ch apter 4 HDD Not Operating Correctly If the HDD does not op erate correctly , perform the following ac tions one at a ti me to correct the problem. 1. Disconnect all external devices. 2. Run a complete virus scan using up-to-date software to ensure the computer is virus free.
Chapter 4 166 11 . Remove and reinstall the mouse driv er . 12. Check the Device Manager to determine that: • The device is properly installed. There ar e no red Xs or yellow exclamation marks. • There are no device conflicts. • No hardware is listed under Other Devices.
167 Ch apter 4 Intermittent Problems Intermittent system hang problems can be caused by a variety of reasons that have nothing to do with a hardware defect, such as: cosmic radiation, electros tatic discharge, or software errors. FRU replacement should be considered only when a recurring prob lem exists.
Chapter 4 168 POST Codes These tables describe the POST code s and descriptions durin g th e POST . Bootblock Initialization Code Checkpoints Checkpoint D escription Before D0 If boot block debugger is enabled, CPU cache-as-RAM func tio nality is enabled at this point.
169 Ch apter 4 Bootblock Recovery Code Checkpoints POST Code Checkpoints Checkpoint Desc ription E0 Initiali ze the floppy controller in the super I/O. Some interrupt vectors are initialized. DMA controller is initialized. 8259 interrupt c ontroller is initialized.
Chapter 4 170 0A In itializes the 8042 compatible Key Board Controller . 0B Detects the presence of PS/2 mouse. 0C Detects the presence of Keyboard in KBC port. 0E T esting and initialization of different Input Device s. Also, update the Kernel V ariab les.
171 Ch apter 4 A2 T akes care of runtime image preparation for different BIOS modules. Fill the free area in F000h segment with 0FFh. Initializes the Microsoft IRQ Routing T able. Prepares the runtime language module. Di sable s the system configuration display if needed.
Chapter 4 172 DIM Code Checkpoints ACPI Runtime Checkpoints Boot Block Beep Codes POST BIOS Beep Codes Checkpoint Desc ription 2A In itialize different buses and perform the followin g functions: Reset, Detect, a nd Disable (function 0); S tatic Device Initialization (func tion 1); Boot Output De vice Initialization (function 2).
173 Ch apter 4 Troubleshooting POST BIOS Beep Codes 8 Display memory error (system video adapte r) Number of Beeps T rou bleshooting Action 1, 3 Reseat the memory , or r eplace with known good modules. 6, 7 Fatal error indicating a serious prob lem with th e system.
Chapter 4 174.
Chapter 5 175 Jumper and Connector Locations Mainboard Top View Item Description Item Description 1 Iinverter conn 1 1 Audio conn 2 power conn 12 light foot conn 3 LCD conn 13 light pipe conn 4 GPU F .
176 Chapter 5 BIOS Recovery 1. Please save the SUPER.ROM to a USB key (Root Folder). NOTE: The USB flash should be a F A T 32 format. It does not need to be a bootable device. 2. Connect the USB key to a USB port in the system. 3. Press the power button to power the system up.
Chapter 6 177 FRU (Field Replaceable Unit) List This chapter gives you the FRU (Field Replaceable Unit) li sting in globa l configurations of this co mputer . Refer to this chapter w hen ever orderin g for p arts to repair or for RMA (R eturn Merchandise Authorization).
178 Chapter 6 Exploded Diagrams Main Assembly No. Description Acer P/N 1 EL5 FRONT BEZEL ZUB ASSY SIL VER 34EL5FBT N00 2 LCD(TFT)23” L TM230H01-A03 AA0230HT002 3 EL5LCD FRAME SUB ASSY 3SEL5LSTN00 4 .
Chapter 6 179 IMPORT ANT : *The touchscreen control boa rd and LCD panel must be returned together for RMA purposes. See “Removing the T o uchscreen Co ntrol Bo ard” on page 59. The touchscree n control board record s the specific panel’s dat a, please do not separate these for RMA.
180 Chapter 6 FRU List CA TEGOR Y ACER DESCRIPTION ACER P ART NO. ADD ON CARD 288-1N135-000AC GEFORCE G210M 512MB (64BITS) DDR3 SAMSUNG MXM3 VG .PCMG2.100 288-1N136-000AC GEFORCE G T240M 1GB (128BIT S) DDR3 SAMSUNG MXM3 VG .PCMG2.400 BOARD AUDIO BOARD 55.
Chapter 6 181 POWER CORD POWER CORD 1.8M BLAC K UK 3P 27.SC907.001 POWER CORD 1.8M BLAC K SWISS 3P 27.SC907.002 POWER CORD 1.8M BLAC K S.A 3P 27.SC907.003 POWER CORD 1.8M BLAC K UK 3P 27.SC907.004 POWER CORD 1.8M BLAC K IT 3P 27.SC907.005 POWER CORD 1.
182 Chapter 6 INVERTER CABLE 50.SDB07.008 LED CABLE 50.SCY07.009 USB CABLE W/PORT 50.SCY07.010 POWER CABLE 50.SCY07.01 1 CARD READER CABLE 50.SDB07.009 HOME BUTTON C ABLE 50.SCY07.016 BLUETOOTH CABLE 50.SCY07.013 TV TUNER CABLE 50.SCY07.014 TV EXTERNAL ANTENNA - DVB-T 50.
Chapter 6 183 HINGE COVER 42.SCY07.002 REAR COVER SIL VER - LEFT W/O B-CAS 60.SCY07.004 REAR COVER SIL VER - LEFT W/B CAS 60.SCY07.005 REAR COVER SIL VER - RIGHT 60.SCY07.006 LCD FRAME 33.SDB07.001 BACK FRAME 33.SDB07.002 FRAME RAM COVER 33.SCY07.003 HINGE 60.
184 Chapter 6 CPU/PROCESSOR CPU Intel Core i5 750 LGA 2.66G 8M 1333 1 156 95W B-1 KC.75001.CI5 CPU Intel Core i7 860 LGA 2.8G 8M 1 333 1 156 95W B-1 Quad Core KC.86001.CI7 CPU Intel Core i7 870 LGA 2.93G 8M 1333 1 156 95W B-1 Quad Core KC.87001.CI7 CPU Intel Core i3 530 LGA 2.
Chapter 6 185 KEYBOARD Keyboard CHICONY KG-0766 RF2.4 104KS Si lver US with new color AC-MT -010 KB.RF403.245 Keyboard CHICONY KG-0766 RF2.4 104KS Si lver T raditional Chinese with new color AC-MT -010 KB.RF403.246 Keyboard CHICONY KG-0766 RF2.4 104KS Si lver Simplified Chinese with new color AC-MT -010 KB.
186 Chapter 6 Keyboard CHICONY KG-0766 RF2.4 104KS Si lver Russian with new color AC-MT -010 KB.RF403.26 9 Keyboard CHICONY KG-0766 RF2.4 105KS Si lver Hungarian with new color AC-MT -010 KB.RF403.27 0 Keyboard CHICONY KG-0766 RF2.4 104KS Si lver Greek with new color AC-MT -010 KB.
Chapter 6 187 MEMOR Y Memory SAMSUNG UNB-DIMM DDRIII 1333 1GB M378B2873EH1-CH9 LF 12 8*8 0.055um KN.1GB0B.030 Memory UNIFOSA UNB-DIMM DDRIII 1333 1GB GU502203EP0201 LF 128*8 0.065um KN.1 GB0H.015 Memory SAMSUNG UNB-DIMM DDRIII 1333 2GB M378B5673EH1-CH9 LF 12 8*8 0.
Appendix A 188 Model Definition and Configuration Appendix A.
189 Appendix A.
Appendix B 190 Test Compatible Components This computer ’s compat ibility is tested and verified by Acer ’s internal testing department. All of it s system functions are tested under OS Linux, Windows ® XP Home Edition, Windows ® Vista, Windows ® 7 Home Premium, Windows ® 7 Professiona l, and Win dows ® 7 S t a rter .
191 Appendix B.
Appendix C 192 Online Support Information This section describe s online techni cal support services a vailable to help yo u repair your Acer Systems. If you are a distributor , deal er, ASP or TPM, please re fer your technical queries to your local Acer branch office.
193 B Base Assembly Removing 47 BIOS vendor 14 Version 14 BIOS Utility 23 – 36 Advanced 27 Exit 36 Navigating 23 PC Health 36 Power 36 Save and Exit 36 System Security 36 Board Layout Top View 175 D.
194.
195.
196.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Aspire Digital Z5710 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Aspire Digital Z5710 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Aspire Digital Z5710 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Aspire Digital Z5710 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Aspire Digital Z5710, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Aspire Digital Z5710.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Aspire Digital Z5710. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Aspire Digital Z5710 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
