Manuale d’uso / di manutenzione del prodotto 3612B del fabbricante Makita
Vai alla pagina of 20
1/2" MODEL 3612B Collet chuck Main body No load Overall capacity stroke speed length INSTRUCTION MANUAL Net weight DOUBLE INSULATION 112" 0 ~ 65 mm 23,000 287 mm 5 7 kg (0 - 2-9/16") R/min.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- TY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO SONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1.
13. 14. 15. 16. 17. 18. 19. 20. DISCONNECT TOOLS. When not in use, before servicing, and when chang- ing accessories, such as blades, bits, cutters. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on.
ADDITIONAL SAFETY RULES 1. These bits come fully sharpened. Handle them carefully to prevent injury. 2. Check the bit carefully for cracks or damage before operation. Replace 3. Avoid cutting nails. Inspect for and remove all nails from the workpiece be- 4.
Installing bit 0 Loosen the collet nut and insert the bit into the chuck hole. Press the shaft lock and use the wrench to secure the bit care- fully. Use the collet sleeve if necessary. I CAUTION : 0 Do not tighten the collet chuck without inserting a bit; do not install a small bit with- out using a collet sleeve.
Stopper block .The stopper block has an adjustment hex bolts which move 1 mm (1/32") per turn. After obtaining the desired depth setting, tighten the hex nut on the bolt with the spanner. block I Nylon nut By turning the nylon nut, the upper limit of the tool can be adjusted.
Operation *After switching on the tool, lower the router, keeping the base plate firmly against the work surface while routing. CAUTION 0 When doing edge routing, the workpiece surface should be on the left side of the bit in the router feed direction or a dangerous kickback may result.
Straight guide .The straight guide is effectively used for straight cuts when chamfering or groov- ing. When grooving, the router tends to pull away to the left in relation to the feed direction. Install the straight guide on the right side to assure a good finished cut.
Trimmer guide .Trimming, inside work and curved cuts in veneers for furniture and the like can be done easily with the trimmer guide. The guide roller rides the curve and assures a fine cut. *The trimmer guide can be attached to the guide holder with the thumb bolt B.
MAINTENANCE CAUTION : Always be sure that the tool is switched off and unplugged before attempting to perform inspection and maintenance. Replacing carbon brushes 0 Remove and check the carbon brushes regularly. Replace when they wear down to about 6 mm (1/4") or less.
ACCESSORIES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
Bits STRAIGHT -Single Flute CARBIDE TIPPED I PARTNO. A B C 0 E 733002-0A 3/8 1 1-1/2 1 /2 2-3/4 733002-4A 1 /2 1-1 /4 1 -3/8 112 2-7/8 HIGH SPEED STEEL PART NO.
VEINING -Single Flute SOLID CARBIDE PART NO A B C D E 733007-8A 3/16 7/32 1-1 14 114 1-1 12 ROUND NOSE CARBIDE TIPPED PART NO A 8 C D E 733008-2A 114 15/32 1-1 14 114 1-718 733008-4A 318 9116 1-114 114 2 7330086A 1 12 11116 1-114 114 2-3116 733008-8A 518 11116 1-114 114 2.
14" DOVE TAIL CARBIDE TIPPED PART NO. A B C D E 733009-6A 1 I2 112 1-1/4 114 1-718 HIGH SPEED STEEL PART NO. A B C D E 733239-6A 112 112 1-318 114 2 STAGGER TOOTH -ID!- CARBIDE TIPPED PART NO. A B C D E 733007-0A 318 1-112 1-1 I4 112 3 PANEL PILOT CARBIDE TIPPED PART NO.
BEADING CARBIDE TIPPED - Ball Bearing Pilot PART NO. A B C D E 733121-4A 3116 318 1-114 114 1.15116 7331 21 -6A 1 14 112 1-1 14 114 2 7331 21 -8A 5116 1 12 1-114 114 2.
ROMAN OGEE CARBIDE TIPPED - Ball Bearing Pilot PART NO. A B C D E 7331 23-2A 5/32 15/32 1.114 1 /4 2 733123-4A 1 I4 21/32 1-114 1 I4 2.118 REPLACEMENT BEARING - NO. 733132-2A FLUSH TRIMMER -Self Piloting SOLID CARBIDE PART NO. A B C D E 733128-0A 1 /4 1 /4 1-1/16 114 1-9/16 7’ BEVEL TRIMMER - Self-Piloting SOLID CARBIDE PART NO.
COMBINATION FLUSH 122" BEVEL TRIMMER CARBIDE TIPPED PART NO. A B C D E 7331 28-6A 7116 112 1-114 114 1-314 ~~ 3 FLUTE FLUSH TRIMMER ASSEMBLY -Self Piloting SOLID CARBIDE CUTTER PART NO. A 8 C D E 733129-2A 518 318 1-114 114 2-318 REPLACEMENT BEARING - NO.
3 FLUTE 22" BEVEL REPLACEMENT CUTTER A 8 C L SOLID CARBIDE A t I PARTNO. 733129-8A 318 FOR BEVEL TRIMMER 1 /4" REPLACEMENT ARBOR PART NO. A B C D E 733131-2A 1 /4 318 1-114 1 I4 2.318 FOR FLUSH TRIMMER ASSEMBLY NO. 733129-2A AND NO. 733129-4A BALL BEARING PILOT PART NO.
Jan -24 -'E6 EN 12 mm (1/2") ROUTER Model 3612B 19.
MODEL 36128 Jan 24 86 EN ‘EM AiD DESCRIPTION $& DESCRIPTION MACHINE ~ MACHINE ~ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 - 1 1 1 1 4 1 2 4 1 1 1 1 1.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Makita 3612B è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Makita 3612B - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Makita 3612B imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Makita 3612B ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Makita 3612B, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Makita 3612B.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Makita 3612B. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Makita 3612B insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
