Manuale d’uso / di manutenzione del prodotto 790.4281 del fabbricante Kenmore
Vai alla pagina of 18
® ELECTRIC COOKTOP PARRILLA COCINAR Models, Modelos: 790.4281_, 790.4282_ .,.-'--- Color number, nL_mero de color f LECTRICA www.sears.com Sears Roebuck and Co.
Table of Contents Warranty ........................................................................... 2 iMPORTANT SAFETY iNSTRUCTiONS ......................... 3-4 Serial Plate Location ......................................................... 4 Product Record .
important Safety instructions Read all instructions before using this appliance. Save these instructions for future reference. This manual contains important safety symbols and instructions. Please pay attention to these symbols and follow all instructions given.
important Safety instructions expose a portion of the surface heating unit to direct contact and may result in ignition of clothing. Proper relationship of utensil to the surface unit will also improve efficiency. • Utensil Handles Should Be Turned inward from Edges of Cooktop and Should Not Extend Over Adjacent Surface Units.
Cooktop Features READTHESE iNSTRUCTiONS CAREFULLY BEFORE USING THE COOKTOP The Cooking Zones may appear to be cool while turned ON and after they have been turned OFF. The glass surface may be HOT form residual heat transferred from the cookware and burns may occur.
Surface Cooking Use Proper Cookware Cookware should have /,_ flat bottoms that make good contact with the entire surface heating element. Check for flatness by rotating a ruler across the bottom of the cookware (See Figure 1 ). Be sure to follow the recommendations for using cookware as shown to the right.
Setting Surface Controls General Cooktop information About the Ceramic Glass Cooktop The ceramic cooktop has radiant surface elements located below the surface of the glass. The design of the ceramic cooktop outlines the area of the surface element underneath.
Setting Surface Controls (cont'd) Using the Touch Control The recommended way to use the touch pads on the cooktop is shown Jn Figure t. Be sure that your finger is placed in the center of the touch pad as shown. If the finger is not placed on the center of a pad, the cooktop may not respond to the selection made.
Setting Surface Controls (cont'd) The Electronic Surface Element Control (ESEC) The Electronic Surface Element Control (ESEC) feature provides a digital display of the radiant surface elements on the cooktop. The ESEC display in combination with the touch pads is designed to replace conventional control knobs.
Setting Surface Controls (cont'd) Operating Single Radiant Surface Elements The 30" cooktop has 2 SINGLE radiant surface elements: the RIGHT REAR and the LEFT REAR positions (Figure 1); The 36" cooktop has 3 SINGLE radiant surface elements: the RIGHT REAR, the CENTER REAR and the LEFT REAR positions (Figure 2).
Setting Surface Controls (cont'd) Operating the DUAL Surface Element The cooktops are equipped with a DUAL radiant surface element located at the right front cooktop position (Figures t & 2). indicator lights on the control panel at that position are used to indicate what portions of the dual radiant element will heat.
Setting Surface Controls (cont'd) Operating the Bridge Surface Element The cooktop is equipped with a"BRI DGE" surface eJement located at the left cooktop position (See Figures I & 2). Indicator lights on the cooktop are used to indicate what portions of the Bridge eJement will heat.
Setting Surface Controls (cont'd) Sabbath Feature Mode When the Sabbath feature is ON, all electronic surface element control displays show "Sb" (Fig. t). The surface elements can be used even if the Sabbath Feature is on. To activate the Sabbath Feature Mode: _ Fig.
General Care & Cleaning Cleaning Various Parts of Your Cooktop Before cleaning any part of the cooktop, be sure all controls are turned OFF and the cooktop is COOL. REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE. REGULAR CLEANINGS NOW WILL REDUCE THE DIFFICULTY AND EXTENT OF A MAJOR CLEANING LATER.
General Care & Cleaning Cleaning Recommendations for the Ceramic Glass Cooktop Before cleaning the cooktop, be sure the controls are turned to OFF and the cooktop is COOL. DO NOT use a cooktop cleaner on a hot cooktop. The fumes can be hazardous to your health, and can chemically damage the ceramic glass surface.
OCCURRENCE Before You Call POSSIBLE CAUSE/SOLUTION Entire cooktop does not operate. House fuse has blown or circuit breaker has tripped. Check/reset breaker or replace fuse. If the problem is a circuit overload, have this situation corrected by a qualified electrician.
Master Protection Agreements Congratulations on making a smart purchase. Your new Kenmore ® product is designed and manufactured for years of dependable operation. But like all products, it may require preventive maintenance or repair from time to time.
Your Home For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Kenmore 790.4281 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Kenmore 790.4281 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Kenmore 790.4281 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Kenmore 790.4281 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Kenmore 790.4281, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Kenmore 790.4281.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Kenmore 790.4281. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Kenmore 790.4281 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
