Manuale d’uso / di manutenzione del prodotto E0M22UA#ABA del fabbricante HP (Hewlett-Packard)
Vai alla pagina of 126
HP ENVY 15 Notebook PC and HP ENVY TouchSmart 15 Notebook PC Maintenance and Service Guide.
© Copyright 2013 Hewlett-Packard Development Company, L.P. AMD, the AMD Arrow log o, and combinations thereof, are trademarks of Advanced Micro Devices, Inc. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license.
Safety warning notice WARNING! To red uce the possib ility of hea t-related i n juries or of overheating the device, do not place the device directly on your lap or obstruct t he device air vents.
iv Safety warning notice.
Table of contents 1 Product description ............. ............... .............. ............. ............. ................ .............. ...... ... 1 2 External component identification .......... ............ ............. ........... .......
Packagi ng and transp orting gui delines ....... ........................ ........................ 40 Workstatio n guidel ines .............................................................. 40 5 Removal and repla cement procedures for Custom er Self-Repair par ts .
Hard drive sp ecifica tions ....... ................................ ........................ ............................ .......... . 104 9 Backing up, restoring, and recovering ............ ................... ................ ................... .
viii.
1 Product description Category Description Computer m odels equipped with an AMD processor Computer models equipped with an Intel processor Produc t Name HP ENVY 15 Notebook PC HP ENVY TouchSmart 15 Notebook PC √√ Proces sors ● AMD® A10-5750M 2.
Category Description Computer m odels equipped with an AMD processor Computer models equipped with an Intel processor Proces sors (continued) ● Intel® Quad Core® i7-4900MQ 2.80-GHz processor (SC turbo up to 3.80-GHz; 1600-MHz FSB, 8.0-MB L3 cache, 47 W) ● Intel Quad Core i7-4800MQ 2.
Category Description Computer m odels equipped with an AMD processor Computer models equipped with an Intel processor Graphics Internal graphics: ● AMD Radeon™ HD 8650G graphics (only on computer .
Category Description Computer m odels equipped with an AMD processor Computer models equipped with an Intel processor Graphics (continued) Intern al graphics: ● Intel HD Graphics 4600 on computer mo.
Category Description Computer m odels equipped with an AMD processor Computer models equipped with an Intel processor Memory Two customer-accessible/upgradable memory module slots Support for DDR3L (1.
Category Description Computer m odels equipped with an AMD processor Computer models equipped with an Intel processor Audio an d video Quad speakers Subwoofer Dual array digital microphones with appro.
Category Description Computer m odels equipped with an AMD processor Computer models equipped with an Intel processor Ports ● AC adapter, HP Smart ● Audio-in (mono microphone)/audio- out (stereo headphone) combo jack ● HDMI v1.4 supporting up to 1920×1080 @ 60Hz ● RJ-45 (Ethernet) ● USB: four USB 3.
Category Description Computer m odels equipped with an AMD processor Computer models equipped with an Intel processor Security Support for the following: ● Security cable lock ● Fingerprint reader.
2 External component identification Finding your hardware an d software information Locating hardware To find out what hardware is installed on your computer: 1. From the Start screen, type c , and then select Control Panel . 2. Select System and Security , and then in the System area, select Device Manager .
Display Item Componen t Description (1) Internal display switch Turns off the disp lay and initiates Sleep if the display is closed while the power is on . NOTE: The internal display switch is not visible from the outside of the computer. (2) Internal microphones (2) Record sound.
Buttons and speakers Item Componen t Description (1) Power button ● When the computer is off, press the button to turn on the computer. ● When the computer is on, press the button briefly to initiate Sleep. ● When the computer is in the Sleep state, pres s the button briefly to exit Sleep.
Item Componen t Description (2) Speakers (2) Produce sound. (3) Fingerprint reader (select models only) Allows a fingerprint logon to Windows, instead of a password logon. Keys Item Componen t Description (1) esc key Reveals system information when pressed in combinat ion with the fn key.
Lights Item Componen t Description (1) Power ligh t ● White: The computer is on. ● Blinking white: The com puter is in the Sleep state, which is an energy-sav ing mode. The c omputer shuts off power to the display and other unneeded components. ● Off: The computer is off or in Hibernation.
Item Componen t Description (4) Caps lock light On: Caps lock is on, which switches th e keys to all capital letters. (5) Fingerprint reader light ● White: The fingerprint authentication was successful. ● Amber: The fingerprint authentication failed.
Left side Item Componen t Description (1) Security cable slot Attaches an optio nal security cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. (2) Vents (2) Enables airflow to cool internal components.
Item Componen t Description (7) Hard drive lig ht ● Blinking white: The hard drive is being accessed. ● Amber: HP 3D DriveGuard has temporarily parked the hard drive. (8) Power ligh t ● White: The computer is on. ● Blinking white: The com puter is in the Sleep state, which is an energy-saving mode.
Right side Item Componen t Description (1) Audio-out (headphone) jack/Audio- in (microphone) jack Connects optional powered stereo speakers, headphones, earbuds, a headset, or a television audio cable. Also connects an optional headset microphone. This jack does not support optional microphone-only devices.
Bottom Item Componen t Description (1) Service cover Provides access to th e hard drive bay, the WLAN module slot, and the memory module slots. CAUTION: To prevent an unresponsive system, replace the .
3 Illustrated parts catalog Service tag When ordering pa rts or reques ting information, provide the comp uter serial number and mod el number provided on the service tag . Item Description Function (1) Product name This is the product name affixed to the front of the computer.
Item Description Function (3) Part number/Product number (p/n) This nu mber provides specif ic information about the product's hardware co mponents. The part number helps a service technician to determine what components and parts are needed. (4) Warranty period This number describes the duration of the warranty period for the computer.
Computer major components Computer major components 21.
Item Component Spare part number (1) Display assembly (includes webcamera/microphone modu le and wireless antenna cables): 15.6-in, BrightView, FHD, LED, TouchScreen display as sembly 720550-001 15.6-in, BrightView, HD, LED, TouchScreen display assembly 720549-001 15.
Item Component Spare part number For use only on computer models equipped with an Intel processor in the United Ki ngdom and Singapore 720244-031 For use on all computer models in the United States 72.
Item Component Spare part number For use only on computer models equippe d with the Intel HM87 chipset, the GeForce 750M graphics subsystem, an d the Linux operating system 720569-001 For use only on .
Item Component Spare part number Intel Quad Core i7-4700MQ 2.40-GHz process or (SC turbo up to 3.40-GHz; 1600- MHz FSB, 6.0-MB L3 cache, 47 W) 723521-001 Intel Dual Core i5-3380M 2.90-GHz pro cessor (SC turbo up to 3.60-GHz; 1600-MHz FSB; 3.0-MB L3 cache, 35 W) 708762-001 Intel Dual Core i5-3230M 2.
Item Component Spare part number Realtek RTL8188EE 802.11bgn Wi-Fi Adapter for use on all computer models 709848-001 Intel Centrino Wirel ess-N 2230 Combo Adapter for use only on computer models equip.
Display assembly subcomponents Item Component Spare part number (1) Display bezel 720535-001 (2) Display hinges (includes left and right hinges, le ft and right hinge co vers, and left and right hinge.
Mass storage devices Item Component Spare part number (1) External DVD±RW Double-Laye r with SuperMulti Drive 659940-001 (2) Ha rd drive (does not include hard drive bracke t or hard drive connector cable): 1-TB, 5400-rpm, 9.5-mm 676521-001 750-GB, 5400-rpm, 9.
Miscellaneous parts Component Spare part n umber AC adapter: 120-W HP Slim AC adapter (PFC, EM, 4.5-mm) fo r use only on computer models equipped with an Intel processor 710415-001 65-W HP Smart AC adapter (non-PFC, 4.5-mm ) for use on all computer models 710412-001 65-W HP Smart AC adapter (non-P FC, EM, 4.
Sequential part number listing Spare part number Description 490371-001 Power cord for use on all computer m odels in North Am erica (3-pin, black, 1.83-m) 490371-011 Power cord for use on all computer models in Australia (3-pin, black, 1.83-m) 490371-021 Power cord for use on all computer models in Europe (3-pin, black, 1.
Spare part number Description 683802-001 500-GB, 5400-rpm, SATA, 9.5- and 7.0-m m ha rd drive (does not include hard drive bracket or hard drive connector cable) NOTE: The hard drive bracket and scre ws are included in the Hard Drive Hardware Kit, spare part number 718432-001.
Spare part number Description 720235-001 Fan (includes cable) 720242-001 Keyboard wit h pointing stick for use on all comp uter models in the United St ates (includes keyboard cable and pointing stick.
Spare part number Description 720244-DB1 Keyboard with backlight for use o n all comput er models in Canada (includes backlight cable and keyboard cable) 720244-DH1 Keyboard with backlight for use onl.
Spare part number Description 720553-001 Po wer button board (includes cable) 720554-001 Connector board for use only on comput er models equipped with an Intel processor and a graphics subsystem with UMA memory (includes 2 cables) 720555-001 Service cover 720556-001 15.
Spare part number Description 720568-601 System board for us e only on computer models equipped with the Intel HM77 chipset, a graphics subsystem with UMA memory, and the Windows 8 Professional operat.
Spare part number Description 723523-001 Intel Quad Core i7-4900MQ 2.80-GHz proces so r (SC turbo up to 3.80-GHz; 1600-M Hz FSB, 8.0- MB L3 cache, 47 W; includes replacem ent thermal material) 723524-001 Intel Quad Core i7-4800MQ 2.70-GHz proces so r (SC turbo up to 3.
4 Removal and replacement procedures preliminary requirements Tools required You will need the fo llowing tools to comple te the removal and replacement procedures: ● Flat-bladed screw driver ● Ma.
Cables and connectors CAUTION: When servi cing the computer, be sure that cabl es are placed in their proper locations during the reassembly proc ess. Improper cable placement can da mage the computer. Cables must be handled with extreme care to avoi d damage.
Grounding guidelines Electrostatic discharge damage Electronic components are sensi tiv e to electrostatic discharge (ESD). Circuitr y design and s tructure determine the degree of sensi tivity.
Packaging and transp orting guidelines Follow these grounding guidelin es when packaging and transporting equipment: ● To avoid hand contact, transport produc ts in static-safe tubes, bags, or box es. ● Protect ESD-sensitive parts and as se mblies with conductive or ap proved containers or packaging.
Equipment guidelines Grounding equipment must include eith er a wrist st rap or a foot strap at a grou nded workstation. ● When seated, wear a wrist strap co nnected to a gr ounded system. Wrist straps ar e flexible straps with a minimum of one megohm ±1 0% resistance in the ground co rds.
5 Removal and replacement procedures for Customer Self- Repair parts NOTE: The Customer Self-Repair program is not avail able in all locations. Installing a part not supported by the Custom er Self-Repair program ma y void your warranty. Check your warranty to determine if Customer Self-Repair is suppo rted in your location.
Battery Description Spare part n umber 6-cell, 62-Wh, 2.80-Ah, Li-ion battery 710417-001 6-cell, 47-Wh, 2.20-Ah, Li-ion battery 710416-001 Before removing the battery, follow these steps: 1.
Solid-state drive NOTE: This section applies only to co mputer models equippe d with an Intel processor. Description Spare part n umber 24-GB solid-state drive 720564-001 Before removing the solid-s tate drive, follow these st eps: 1. Turn off the computer.
5. Remove the solid-state drive (2) by pulling the drive away from the slot a t an angle. Reverse this procedure to install the soli d-state drive. WLAN module Description Spare part n umber Atheros AR9485 802.11b/g/n WiFi Adapter for use on all computer models 675794-001 Mediatek MT7630E 802.
Before removing the WLAN module , follow these steps: 1. Turn off the computer. If yo u are unsure whether the comp uter is off or in Hi bernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from t he computer by un plugging the power cord from the computer.
Reverse this procedure to install the WLAN module. Hard drive Description Spare part n umber 1-TB, 5400-rpm, 9.5-mm 676521-001 750-GB, 5400-rpm, 9.5-mm 634250-001 500-GB, 5400-rpm, 9.5- and 7.0-mm 683802-001 Before removing the har d drive, follow th ese steps: 1.
3. Lift up on the hard drive tab (4) to remove t he hard driv e from the hard dr ive bay. 4. If it is necessary to disassemble the hard driv e, perform the followin g steps: a. Position the hard drive with the connector toward you. b. Disconnect the hard drive connector cable (1) from the hard drive.
Reverse this procedure to install the RTC battery. Memory module Description Spare part n umber 8-GB (PC3L, 12800, 1600-MHz) 693374-001 4-GB (PC3L, 12800, 1600-MHz) 691740-001 2-GB (PC3L, 12800, 1600-MHz) 691739-001 Update BIOS before adding memory modules Before adding new memory, ma ke sur e you update the comp uter to the latest BIOS.
4. Click the l ink for the comput er model. 5. Select the operating system, an d then click Next . 6. Under Step 2: Sele ct a Download , click the BIOS link. 7. Click the li nk for the most recent BIOS. 8. Click the Download button, and then follow th e on-screen instructions.
3. Remove the memory module (2) by pulling the module away fr om the slot at an angl e. Reverse this procedure to install a memory module. Component replacement proced ures 51.
6 Removal and replacement procedures for Authorized Service Provider parts CAUTION: Components described in this chapter should only be accessed by an authorized service provider.
NOTE: If the computer is equipped with a n AMD processor, complete st eps 1 through 3 to remove the RTC battery. If the computer is equipped with an Intel proces sor, complete step 4 to re move the RTC battery. 1. Disconnect the RTC battery cable (1) from the system board.
4. Use a thin, non-co nductive tool (1) to remove the disc cell RTC battery (2) from the socket on the system board. Reverse this procedure to install the RTC battery. Wh en insta lling the disc ce ll RT C battery, make sure the “+” sign faces up.
Base enclosure Description Spare part n umber Base enclosure (includes 4 rubber feet, battery lock latch, battery release latch, and RJ-45 cover) 720534-001 Before removing the bas e enclosure, follow these st eps: 1.
3. Remove the following screws: (1) Two Phillips PM2.5×4.5 screws unde r the fron t edge of the service cove r (2) Three Phillips PM2.5×3.0 screws in the hard drive bay (3) Seven Phillips PM1.
4. Remove the base enclosure. Reverse this procedure to install the base enclosu re. Display assembly NOTE: The TouchScreen disp lay assembly is spared only at the component level. The non- TouchScreen display as sembly is spared at both the componen t and the subcomponent level.
3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 43 ), and then remove th e following components: a. Solid-state drive (s ee Solid-state drive on page 44 ) b. Hard drive (see Hard drive on page 47 ) c. Base encl osure (s ee Base encl osure on page 55 ) Remove the display assembly: 1.
5. Remove the following screws th at secure the display assembly to the top co ver: (1) Three Phillips PM2.5×4.5 screws (two on the left hinge, one on the right hinge) (2) One Phillips PM2.5×6.5 screw on the right hinge (3) One Phillips PM2.0×2.5 screw securing the ground loop on the right hinge 6.
7. Remove the disp lay assembly (2) from the computer. 8. If it is necessary to replace the disp lay bezel or any of the display assembly subcomponent s: a. Remove the two screw covers (1) and the four Phillips PM 2.5×3.2 broad head screws (2) that secure the display beze l to the display assembly.
c. Remove the display bezel (4) . The display bezel is available us ing spare part number 720535 -001. 9. If it is necessary to repl ace the display hinge cover: a. Remove the fo ur Phillips PM2.0×2. 9 screws (1) that secure the display hinge covers to the display enclosure.
10. If it is necessary to re place the di splay panel: a. Remove the fo ur Phillips PM2.0×2. 9 screws (1) that secure the display panel to the display enclosure. b. Lift the display panel (2 ) straight up and remov e it from the displ ay enclosure. The display panel is available usin g spare pa rt number s 720557-001 (15.
b. Release the adhe sive strip (1) that secures the display panel ca ble to the display panel, and then disconnect t he display panel cable (2) from the display panel. c. Remove the display panel cable. The display panel cable is availa ble using spare part number 720536-0 01.
d. Remove the left and righ t display hinge brackets (2) . The display hinge brackets are availabl e using spare part number 7205 48-001. 13. If it is necessary to replac e the webcam/microphone module: CAUTION: Handle the webcam/mic rophone module with caution.
b. Detach the wireless antenna transceivers (2) from the display enclosure. (The wireless antenna transceivers are attached to the d isplay enclosure with double- sided adhesive.) c. Remove the wireless antenna. The wireless ante nna are available using spare part number 720532- 001.
Remove the fan: 1. Disconnect the fan cable (1) from the system board. 2. Remove the two Phillip s PM2.5×4.5 s crews (2) that secure the fan to the top cover. 3. Remove the fan (3) . Reverse this procedure to install the fan. System board NOTE: The system board sp are part kit includes re placement thermal material.
Description Spare part n umber For use only on computer models equipped with an AMD processor, a graphics subsystem with UMA memory, and the Linux operating system 720577-001 For use only on computer .
3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 43 ), and then remove th e following components: a. Solid-state drive (s ee Solid-state drive on page 44 ) b. Hard drive (see Hard drive on page 47 ) c. Base encl osure (s ee Base encl osure on page 55 ) d.
Remove the system board: 1. Disconnect the following c ables from the system b oard: (1) Fingerprint reader board ribbon cable (2) Connector board cable (3) Connector board ribbon cable (4) Power conn.
2. Disconnect the following c ables from the system b oard: (1) Rear speaker cable (2) Subwoofer cable (3) Front speaker cable (4) TouchPad ribbon ca ble (5) Keyboard ribbon cable (6) Power button boa.
3. Remove the nine Phi llips PM2.0×2.9 screws tha t secure the syst em board to the top cover. 4. Lift the left side of the system boar d (1) until it rests at an angle. 5. Remove the system board (2) by sliding it up and to the left an angle. Reverse this procedure to install the sy stem board.
Heat sink NOTE: The heat sink spa re part kit includes replac ement thermal material. Description Spare part n umber For use only on computer models equipped with an AM D processor 720576-001 For use .
3. Remove the heat sink (4) . NOTE: Due to the adhesive quality of the thermal ma terial located between the heat sink and the system board components, i t may be necessary to move the heat sink from side to side to detach it .
5. Remove the heat sink (2) . NOTE: Due to the adhesive quality of the thermal ma terial located between the heat sink and the system board components, i t may be necessary to move the heat sink from side to side to detach it . NOTE: Steps 6 and 7 apply to computer models equipped wit h a graphics subsystem with UMA memory.
7. Remove the heat sink (2) . NOTE: Due to the adhesive quality of the thermal ma terial located between the heat sink and the system board components, i t may be necessary to move the heat sink from side to side to detach it .
76 Chapter 6 Removal and replacement proced ures for Authorized Se rvice Provider parts.
Reverse this procedure to install the heat sink. Processor NOTE: The processor spare p art kit includes replac ement thermal material. Description Spare part n umber AMD A10-5750M 2.50-GHz processor (turbo up to 3.50-GHz; 1600-MHz FSB, 4 .0- MB L2 cache, DDR3, quad core, 35 W) 713548-001 AMD A8-5550M 2.
Description Spare part n umber Intel Quad Core i7-4700MQ 2.40-GHz process or (SC turbo up to 3.40-GHz; 1600-MHz FSB, 6.0-MB L3 cache, 47 W) 723521-001 Intel Dual Core i5-3380M 2.90-GHz process or (SC turbo up to 3.60-GHz; 1600-MHz FSB; 3.0- MB L3 cache, 35 W) 708762-001 Intel Dual Core i5-3230M 2.
2. Lift the processor (3) straight up, and remove it. NOTE: The gold triangle (4) on the proces sor must be aligned with the triangle icon e mbossed on the processor socket when you install the proces sor. Reverse this procedure to install the processor.
Connector board Description Spare part n umber For use only on computer models equipped with an AM D processor 720579-001 For use only on computer models equipped with an Intel processor and a graphic.
4. Detach the connector bo ard ribbon cable (5) from the base enclosur e. (The connector board ribbon cable is attached to the to p cover with doub le-sided t ape.) 5. Remove the three Phillips PM2.0×2.9 screws (1) that secure the connect or board to the top cov er.
Power connector cable Description Spare part n umber For use on all computer models equipped w ith a graphics subsystem with UMA memory 720537-001 For use only on computer models equipped with an Intel processor and a graphics subsystem with discrete memory 720538-001 Before removing the power connector cable, follow these step s: 1.
Reverse this procedure to install the power connector ca ble. Subwoofer Description Spare part n umber Subwoofer (includes cabl e and 3 isolators) 720563-001 Before removing the subwoo fer, follow these steps: 1.
3. Remove the subwoofer (3) . NOTE: The subwoofer in cludes three rubber isol ators (4) . These isola tors are crucia l to the performance of the subwoof er.
Rear speakers Description Spare part n umber Rear speakers (include left and right rear speakers, 2 cables, and 4 isolators) 7205 61-001 Before removing the rear speakers , follow these steps: 1.
4. Remove the rear speakers (4) . NOTE: The rear speakers includes four rubber isolato rs (5) . These isolators are cr ucial to the performanc e of the rear s peakers.
Fingerprint reader board Description Spare part n umber Fingerprint reader board (inclu des bracket and cable) 720543-001 Before removing the fingerprint re ade r board, fol low th ese steps: 1.
5. Remove the fingerprint reader board (5) and cable. Reverse this procedure to instal l the fingerprint reader board. Front speakers Description Spare part n umber Front speakers (include left and right front speakers, 2 cables, and 4 isolators) 720562-001 Before removing the front speakers, f ollow these steps: 1.
Remove the front speakers: 1. Release the front speaker cabl es from the clips (1) and routing channel built into the TouchPad. 2. Remove the four Philli ps PM2.5× 6.2 screws (2) that secure the front speakers to the top cover. 3. Remove the front speakers (3 ) .
TouchPad assembly Description Spare part n umber TouchPad assembly (includes TouchPad bracket, TouchPad button board, TouchPad, and cables) 722972-001 Before removing the TouchPad, follow these steps: 1.
2. Remove the TouchPad bracket (2) . 3. Release the tw o pieces of g rounding tape (1) that connect the TouchPad to the top cover. 4. Remove the four Phillips PM2.5×2.5 broad head screws (2) that secure the TouchPad to the top cove r. NOTE: The second an d third screws include two rubber washers (3) .
6. Slide the TouchPad (5) toward the back of the top cover, and t hen lift the TouchPad straight up and remove it. Reverse this procedure to install the TouchPad.
Power button board Description Spare part n umber Power button board (includes cable) 720553-001 Before removing the powe r button board, follow these s teps: 1. Turn off the computer. If yo u are unsure whether the comp uter is off or in Hi bernation, turn the computer on, and then shut it down through the operating system.
4. Remove the power button board (4) . Reverse this procedure to install the power button board. 94 Chapter 6 Removal and replacement proced ures for Authorized Se rvice Provider parts.
Keyboard NOTE: The keyboard sp are part kit includ es a keyboard cable. For use in country/re gion Spare part number Keyboard with backlight (i ncludes backlight cable): For use only on computer model.
Before removing the keybo ard, follow these steps: 1. Turn off the computer. If yo u are unsure whether the comp uter is off or in Hi bernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from t he computer by un plugging the power cord from the computer.
3. Remove the keyboard shield (3) . CAUTION: When removing the keybo ard shield, make sure the keyboard cab le and backlight cable are not dam aged when bein g released th r ough the opening in th e keyboard shield. The keyboard shield is available usin g spare part number .
9. Remove the keyboard (3) . Reverse this procedure to install the keyboard. 98 Chapter 6 Removal and replacement proced ures for Authorized Se rvice Provider parts.
7 Using Setup Utility (BIOS) and System Diagnostics Setup Utility, or Basic Input /Output System (BIOS) , controls communication between all the input and output device s on the system (such a s disk drives , display, keyboard, mouse, and printer).
Downloading a BIOS update CAUTION: To reduce the risk of damage to t he comput er or an unsuccessful installation, download and install a BIOS update only when the computer is connect ed to reliable external power using the AC adapter.
Using System Diagnostics To start System Diagnostics: 1. Turn on or restart the co mputer, quickly pre ss esc , and then press f2 . 2. Click the diagn ostic test you want to run, and then follo w the on-s creen instructio ns. NOTE: If you need to st op a diagnostic test while it is running, p ress esc .
8 Specifications Computer specifications Metric U.S. Dimensions HP ENVY TouchSmart 15 Notebook PC Width 37.95 cm 14.94 in Depth 25.07 c m 9.87 in Height (front to rear) 1.89 to 2.99 cm 0.74 to 1.18 in Weight 2.76 kg 6.08 lbs HP EN VY 15 No tebook P C Width 37.
Metric U.S. Nonoperating -15 m to 12,192 m -50 ft to 40,000 ft NOTE: Applicable product safety standards spec ify thermal limits for plastic surfaces . The device operates well within this range of temperatures. 15.6-inch display specifications Metric U.
Hard drive specifications 1 -TB, 5400-rpm* 7 50-GB, 5400-rp m** 500-GB, 5400-r pm** Dimensions Height 9.5 mm 9.5 mm 9.5 and 7.0 mm Length 100.4 mm 100.4 mm 100.4 mm Width 69.9 mm 69.9 m m 69.9 mm Weight 110 g 110 g 110 g Interface type SATA SATA SATA Transfer rate Synchronous (maximum) 1.
9 Backing up, restoring, and recovering Your computer inclu des tools provided by HP an d the operating syste m to help you safeguard your information an d retrieve it if you ever need to. Th ese tools will help you return y our computer to a proper working state or even back to the orig inal factory state, all with simple steps.
Creating recovery media and backups Recovery after a syste m failure is only as good as your most recent backup. 1. After you succe ssfully set up the compu ter, create HP Recovery med ia. This step creates a backup of the HP Recovery partition on the computer.
Creating HP Recovery media HP Recovery Manager is a software program that offers a way to creat e recovery media after you successfully set up the computer. HP Recovery medi a can be used to perform system recovery if the hard drive becomes corrupted.
Restore and recovery There are several options for recovering your system. Choose the method that best matches your situation and level of expertise: ● If you need to restore your per sonal fi les and data, you can use Windows File History to restore your informa tion from the ba ckups you c reated.
For more information, see Removing the HP Recovery partition on pa ge 112 . Using Windows Refresh for quick and easy recovery When your compute r is not working pr operly and yo u ne ed to regain system stability, the Windows Refresh option allows you to start fres h and keep what is important to you.
To use the Start screen: 1. From the Start screen, point to the upper-right or lower-r ight corner of the screen to reveal the char ms. 2. Click Settings . 3. Click Change PC settings in the bottom-right corner of the screen, and then select General from the PC settings screen.
Using the HP Recovery partition to recover a minimized image (select models only) The HP Recovery partition (select models only) al lows you to perform a minimized image recovery without the need for recovery di scs or a recovery US B fla sh drive. This type of recovery can only b e used if the hard drive is still working.
4. Select the optical drive or USB fl ash drive you want to boot from. 5. Follow the on-screen instructions. Removing the HP Recovery partition HP Recovery Manager software a llows you to remove the HP Reco very partition to free up hard drive space.
10 Power cord set requirements The wide-range input fe ature of the computer permit s it to operat e from any line volt age from 100 t o 120 volts AC, or from 220 to 240 volts AC. The 3-conductor power cord set in cluded with the computer meets the requ irements for use in the country or region where the equipment is purchased.
Requirements for specific countries and regions Country/region Accredited agency Applicable note number Australia EANSW 1 Austria OVE 1 Belgium CEBC 1 Canada CSA 2 Denmark DEMKO 1 Finland FIMKO 1 Fran.
11 Recycling When a non-rechargeable or rech argeable battery ha s reached the end of its useful life, do not dispose of the battery in general household waste.
Index A AC adapter light 17 AC adapter, spare p art numbers 29, 31 action keys 12 antenna locations 10 removal 64 spare part number 27, 33, 65 Antenna Kit, spare pa rt number 27, 33 audio, product des.
removal 47 spare part numbers 26, 28, 30, 31, 47 specifications 104 hard drive brac ket illustrated 28 removal 48 hard drive connector cable illustrated 28 removal 48 Hard Drive Hardware Kit contents .
product name 1 security 8 serviceability 8 solid-sta te drive 5 video 6 wireless 6 product name 1 R rear speake rs removal 85 spare part number 23, 34, 85 removal/replacement procedures 42, 52 right-s.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il HP (Hewlett-Packard) E0M22UA#ABA è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del HP (Hewlett-Packard) E0M22UA#ABA - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso HP (Hewlett-Packard) E0M22UA#ABA imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul HP (Hewlett-Packard) E0M22UA#ABA ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il HP (Hewlett-Packard) E0M22UA#ABA, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del HP (Hewlett-Packard) E0M22UA#ABA.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il HP (Hewlett-Packard) E0M22UA#ABA. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo HP (Hewlett-Packard) E0M22UA#ABA insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
