Manuale d’uso / di manutenzione del prodotto 600CT del fabbricante HP (Hewlett-Packard)
Vai alla pagina of 42
his guide is for experienced HP Response Center personnel, CEs, and reseller technicians. That is, personnel that have already completed the HP Vectra PC family training course, or equivalent, and have at least six months of experience servicing the HP Vectra PCs.
Thank you for purchasing this Factory Service Manual CD/DVD from servicemanuals4u.com. Please check out our eBay auctions for more great deals on Factory Service Manuals: servicemanuals4u.
OmniBook Product Comparison s ................................................ 3 ......... OmniBook 600 Series: Product Feature s ........................................ 7 ......... Notebook Hardware Structur e .......................................
OmniBook Product Comparisons HP OmniBook 5000 HP OmniBook 4000 HP OmniBook 600 Size Closed •29.5 x 22.6 x 4.9 cm (11.6 x 8.9 x 1.93 in) 29.5 x 22.6 x 4.9 cm (11.6 x 8.9 x 1.93 in) 18.49 × 28.24 × 3.99 cm (7.28 × 11.12 × 1.57 in) Weight •3.08-3.
HP OmniBook 5000 HP OmniBook 4000 HP OmniBook 600 Power •14.4Vdc Rechargeable Lithium-Ion or NiMH battery •Battery life (approximate with one battery): 2 to 3 hrs •Battery recharges to high level in 4 hrs using AC adapter while PC is on or off •2-minute low-battery warning •AC adapter 100 to 240 Vac (50 to 60 Hz) input; 12 Vdc, 3.
HP OmniBook 5000 HP OmniBook 4000 HP OmniBook 600 Audio •16-bit with Sound Blaster and MIDI support •Stereo sound via two built-in speakers 16-bit, Sound Blaster-compatible Stereo sound via two built-in stereo speakers Microsoft Windows sound in CT.
HP OmniBook 5000 HP OmniBook 4000 HP OmniBook 600 Expandability •One Type III PCMCIA slot (or use as two Type II slots) with 3.3-V or 5-V support ISA-based slots, and parallel, serial, SVGA-out (up .
OmniBook 6 00 Series : Product Features Description The smallest, lightest color notebook with desktop performance for the professional on the go Models This is a complete list of all the standard Omnibook models ever made available. Factory special options are not included in this listing.
Accessories Description Part Number 4-MB RAM expansion card F1054A 8-MB RAM expansion card (replaces F1055A). F1055B 16-MB RAM expansion card F1123A 24-MB RAM expansion card F1124A 170-MB Hard Disk Drive F1068A 260-MB Hard Disk Drive F1069A 340-MB Hard Disk Drive F1070A 3.
What comes in the box OmniBook 600 mainframe Battery pack User documentation: manuals, support material, registration card AC adapter (P//N: F1044B), localized power cord Brochures for OmniBook accessories and Deskjet 340 External 3.
Possible Memory Configurations Motherboard RAM Mem ory Memory Slot Total RAM 8MB 24MB (600CT only) 32MB PCMCIA 1.8" Hard Drive s 170.8MB Hard Drive 260.7 MB Hard Drive 340 MB Hard Drive Average seek 12 ms 12 ms 12 ms Track to Track seek 2 ms 2 ms 2 ms Average Latency 6.
Mass storage The hard disk drive can be removed by the user for easy upgrades. The hard drive is located on the right side of the case. Hard drive manufacturer: Maxtor (on early units) and Integral. Hard drive controller manufacturer: VLSI Technology, Inc.
Display/video High performance video: Accelerated local-bus video with 32-bitBLT Memory: 1-MB display RAM - not upgradeable Video Graphics Controller: Chips and Technology 65545 chip External video resolution : Supports VGA/SVGA external monitors with up to 1024 x 768 x 256 colors in noninterlaced mode.
b. On OmniBook 4000CT models, if more than 30 total pixels anywhere on the display are bad, then the display should be considered for replacement. On OmniBook 600CT and OmniBook 5000CT models, if more than 15 total pixels anywhere on the display are bad, then the display should be considered for replacement.
AC adapter: 100 to 240 Vac (50 to 60 Hz) input; 12 Vdc, 2.5A output. Use only an HP F1044B AC adapter (the type shipped with the OmniBook). Using any other adapter could damage the OmniBook and void the warranty. Always plug it into a grounded outlet.
Optional power accessories from HP: HP PowerClip external battery charger. Very compact recharger that slips around the battery pack. Up to four chargers can be linked together and quick charged at the same time. The OmniBook battery and one external battery can be linked together and quick charged at the same time.
Storage environment Storage Temperature with data retention: 32 to 131 degrees F (0 to 55 degrees C). The PCMCIA hard drive in the OmniBook is sensitive to rapid changes in temperature and humidity (e.g. turning on an OmniBook in an air conditioned building immediatly after removing it from a hot and humid car trunk).
Software and Operating System Laplink Remote Access for easy connection to desktop PC, network printers, and other OmniBooks HP PIM: Appointment book, phone book HP financial calculator Applications c.
Password Decode If the user forgets the system password, there is a master password that will unlock the Omnibook. The user calls Technical Support to determine this master password as follows: 1. Support will tell the user the keys to type at the password entry screen: [alt][shft][f10] 2.
Password Decode Policy The password descramble programs for the HP OmniBook PCs are protected as HP Company Private information. They may not be copied, backed-up, printed or distributed. There are only six official copies of each program. In addition to protecting the program itself, it's use is also controlled.
Notebook Hardware Structure Field Replaceable Assemblies Battery Module (End User Replaceable) The Battery Modules is user replaceable. To remove it, turn the OmniBook off. If AC power is plugged in, don't remove the AC power while the battery is out.
Keyboard (Hewlett-Packard Authorized Service Providers Only) To remove the keyboard of the OmniBook 600, insert the Keyboard Removal Tool (see the Product Support Plan for a part number) or a thin metal spatula between the keyboard assembly and the top case just above the F8 function key.
Mouse Assembly (End User Replaceable) The Mouse Assembly is user replaceable on the OmniBook 600. To remove mouse assembly, push the mouse button above the keyboard near the right side of the unit just above the On/Off key. The mouse should partially eject out the right side of the machine.
Hard Disk Drive (End User Replaceable) The Hard Disk Drive (HDD) is user replaceable. To remove the Hard Disk Drive, exit all programs and exit windows, turn unit off, disconnect unit from AC power, turn unit over, and remove battery. Slide the tabs toward each other as shown in the diagram below.
Separating Topcase and Bottom Case, Removing Display Assy and Service Keyboard Topcase (Hewlett-Packard Authorized Service Providers Only) First, remove the pop-out mouse assy, keyboard, and battery. Then remove the four rubber feet. The feet are pressed in place and can be removed by prying them up with a metal probe or a straight pin.
The Topcase Service Assembly does not include the display contrast controls. If the topcase needs to be replaced, be sure to order the contrast controls as well.
Removing the Motherboard (Exch PCA) (Hewlett-Packard Authorized Service Providers Only) Before removing the Motherboard you must first separate the topcase and bottomcase, remove the hard drive, RAM Expansion (if installed) and any installed PCMCIA cards.
Small parts The, I/O door, Rubber feet, and Flash card tray are all replaceable. To remove the I/O door, open it fully. Flex the door so that the center hinge separates from back case. Continue to flex until side pins clear holes in back case. To reassemble, just reverse the procedure.
Installing memory The OmniBook 600 family has one location for expanding system RAM. The memory location is on the front surface of the OmniBook 600. The RAM door is remove by pushing down. To remove RAM already installed, rotate the pull tab out from under the RAM module and pull the module out.
Ehhanced Port Replicator The Enhanced Port Replicator Accessory consists of no field replaceable components. If any component of the dock is defective, the entire unit must be replaced. Troubleshooting Tips: Power Maintain power to the port replicator.
Troubleshooting and Repair Known Hardware Issues (DOS 6.2 and Windows 3.11) Unit is HOT while charging. Battery is HOT Display may discolor while charging closed Clears up when cooler in a few seconds.
Known Hardware Issues (DOS 6.2 and Windows 3.11) Battery life is VERY use and user dependent. Modems use power just by being plugged in. Some software prevents APM from working and may result in reduced battery life. Some programs with their own cursor control may prevent suspend.
If EnhMouse loaded, must click Below button to register click Don't load EnhMouse or click below button. Alarm Manager comes up with error msg if network driver is loaded. Use two boot paths, one for networks and one for on-the-go use. Low battery shutdown gets delayed if in middle of copy disk.
Wait or reboot. Encarta demonstrates similar behavior on other PCs but the behavior is a bit different from PC to PC and time to time. Some times the system is hung. If fax/modem set up in WFW, Control Panel, FAX, then no MS-MAIL remote. Known MS bug.
Get cannot write to E: with QA Partner results file at power on When you get a message saying that ‘Cannot write (read) to (from) drive X:’, hit RETRY button and all will be well. Use the AC adapter. Laplink transfer of large files causes reboots or file changes in 32bit mode Use the floppy, use DOS connect, or turn 32bit transfer off.
Cannot remote print to DJ550C w/ new ColorSmart Drivers Use DeskJet 500 drivers or connect directly. Cannot remote print w/ DJ Plus ColorSmart driver loaded Use DeskJet 500 drivers or connect directly. Status Panel is "permanently" missing. Running OBSTATUS results in "already running" message.
Beep Code Description none CPU register test in progress or failure. 1-1-1 CPU Failure 1-1-3 CMOS write/read test in progress or failure. Failure will result in a system halt. 1-1-4 ROM BIOS checksum test in progress or failure. Failure will result in a system halt.
Beep Code Description 3-1-3 Master interrupt mask register test in progress or failure. Failure results in a system halt. 3-1-4 Slave interrupt mask register test in progress or failure. Failure results in a system halt. 3-2-4 Keyboard controller test in progress or failure.
Last POST: DISPLAY CODES There are a number of POST tests that are performed after the BEEP Code tests. Failure of one or more of these tests will result in a displayed failure code (i.
PhoenixBIOS POST Messages (Power On Self Test Within POST, there are three kinds of messages: Error messages: These messages appear when there is a failure in hardware, software, or firmware. Informational messages: These messages provide information to the user but require no action.
Message Possible Cause No boot sector on fixed disk - press Fl to retry boot (or may also say, press Fl to retry boot, F2 for SETUP utility) The C: drive is not formatted or is not bootable.
Message Possible Cause Memory tests terminated by keystroke This message indicates that a user pressed the spacebar while the memory tests were nmning and stopped the memory tests. Press the Fl key to continue This message indicates that an error was found during POST.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il HP (Hewlett-Packard) 600CT è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del HP (Hewlett-Packard) 600CT - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso HP (Hewlett-Packard) 600CT imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul HP (Hewlett-Packard) 600CT ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il HP (Hewlett-Packard) 600CT, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del HP (Hewlett-Packard) 600CT.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il HP (Hewlett-Packard) 600CT. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo HP (Hewlett-Packard) 600CT insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
