Manuale d’uso / di manutenzione del prodotto 7850 del fabbricante Honeywell
Vai alla pagina of 140
Dolphin ® 7850 Mobile Computer With Windows Mobile ® 5.0 User’s Guide.
Disc laimer Honeywell International Inc. (“HII”) reserves the ri ght to make changes in specifications and other information contained in this document without prior no tice, and the reader should in all cases consult HII to determine whether any such c hanges have been made.
iii Chapter 1 - Agency Information Label Locations ................................................. ............................................................... ....1-1 Regulatory and Safety Approvals for all Dolphin Terminals ....................
iv Chapter 5 - Using the Imager Scanner Engine Overview ................................ ....................................................................................... ....... 5-1 Available Engines ....................................... ....
v Menu Options .................................................. ................................................................. ... 8-9 Discovered Devices ............................................ ...............................................
vi Chapter 13 - Customer Support and Warranty Technical Assistance .................................. ....................................................................... 13 -1 Online Technical Assistance....................... ....................
1 - 1 1 Agency Inf ormation Label Locations Dolphin 7850 mobile computers meet or exceed the requirements of all applicable standards organizations for safe operation. However, as with an y electrical equipment, the best way to ensure safe operation is to operate them according to the agency gu idelines that follow.
1 - 2 Honeywell shall not be liable for use of our pro duct with equipment (i.e., power supplies, personal computers, etc.) that is not CE marked and do es not comply with the Low Voltage Directive.
1 - 3 Die maximale Ausgangsleistung für die IR LED is t 145,1 uW. LED's werden bei einer Frequenz von 115,200 Hz mit einem Auslastungsgrad von 18,75% gepulst, wobei die Einschaltdauer eines einzelnen Impulses 1.
1 - 4 RF , Regulator y , and Safety Agency Appr ov als—802.11b/g (WLAN) and/or Bluetooth Canadian Compliance This Class B digital apparatus complies with Canadian ICES-003.
1 - 5 Micr owa ves The radio in the Dolphin RF terminal operates on the same frequency band as a microwave oven. Therefore, if you use a microwave within range of the Dolphin RF terminal you may notice performance degradation in your wireless network.
1 - 6.
2 - 1 2 Getting Star ted Out of the Bo x When you open the carton, please verify that the carton contains the following items: • Dolphin 7850 mobile computer (the terminal) • Main battery pack (7.
2 - 2 T oda y Screen Initial boot and system resets end on the Today screen; see Resetting the Terminal on page 3-15. Note: You can also open the Today screen at any time by tapping Start > Today.
2 - 3 Using the Stylus Use the stylus or your finger to select or enter info rmation on the touch panel. The stylus functions as a mouse; generally, a tap is the same as a click. Tap Tap the touch panel once to open menu items and select options. Drag Hold the stylus on the screen and drag across the screen to select text and images.
2 - 4.
3 - 1 3 Har d ware Overview There are a number of standard configurations as well as charging and communication peripherals and accessories to maximize the efficiency of your application setting. Standar d T erminal Configuration • Windows Mobile 5.
3 - 2 P eripherals The following items are sold separately and enhan ce the capabilities of your Dolphin terminal. Dolphin HomeBase ™ Device This charging and communication cradle supports both RS-232 and USB communication, enabling your terminal to interface with the majority of PC-based enterprise systems.
3 - 3 Accessories The following items are sold separately and enhan ce the capabilities of your Dolphin terminal. Battery Door T ether For more information, see Battery Door Tether (Optional) on page 3-7. Holster The holster holds one terminal around the waist.
3 - 4 Fr ont P anel Features Decode and Scan LEDs The Scan LED lights red when you press the Scan trigger in scanning applications. The Decode LED lights green when a scanned bar code is successfully decoded. For more information, see LEDs on page 4-1.
3 - 5 Bac k P anel Features Battery Door The battery door covers and secures the main battery pack in the battery well. There is a mechanical switch on the terminal under this do or that puts the terminal in suspend mode (see page 3-15 ) while the battery door is open.
3 - 6 Side P anel Features Note: This graphic shows the right side of the Dolphin 7850 terminal. Angled Display The touch panel display (see page 3-4 ) tilts up toward the user, which improves application viewing when operating the terminal and reduces glare.
3 - 7 IrDA Port The infrared port is IrDA-enabled (Infrared Da ta Association) and communicates with other IrDA-enabled devices such as PCs, printers, modems, or other Dolphin 7850 terminals. The maximum data transfer speed is 115 Kbps with a duty cycle of 18.
3 - 8 4. Remove the battery door. 5. Take the clip piece, loop the lanyard through th e tether holes on the batte ry door as shown below. 6. Reattach the battery door.
3 - 9 I/O Connector This I/O connector has 17 pins that are designed to work exclusively with Dolphin 7850 peripherals and cables. This connector • Powers the terminal. • Charges the main battery. • Supports communication with a host workstation via Microsoft ActiveSync (see page 7-3 ).
3 - 10 Rubber Bumpers There are two sets of rubber bumpers: one set belo w the scan engine window and the other set on the bottom front of the pistol-grip handle. Rubber bump ers enable you to set the terminal down on a flat surface with easy access to the handle, so you can pick up and put down the terminal with ease.
3 - 11 Battery P o wer The intelligent battery technology built into th e terminal features two types of battery power: • The main battery pack installed under the battery door on the back panel.
3 - 12 Charging Options When the battery is installed in the terminal, you can insert the terminal into any one of the following peripherals to charge the main battery pack: • Dolphin HomeBase Devic.
3 - 13 Def ault Critical and Low Batter y P oints Dolphin terminals are programmed to display warnings when the battery reaches critical and low battery points.
3 - 14 Checking Battery P ower Tap Start > Settings > System tab > Power . For more information, see Power on page 6-12. Storage Guidelines To maintain optimal battery performanc e, follow these storage guidelines: • Avoid storing batteries outside the specified range of -4° to 104° F (-20° to 40°C) or in extremely high humidity.
3 - 15 Resetting the T erminal There are two ways to reset the Dolphin te rminal: a soft reset and a hard reset. Soft Reset (W arm Boot) A soft reset re-boots the device without losing RAM data.
3 - 16 T r oubleshooting If the terminal does not wake when you press the scan trigger, • The battery door may not be fully closed. The mech anical switch under the battery door prevents the terminal from resuming operation until the door is closed.
3 - 17 T erminal T echnical Specifications Basic Features Form Factor: Pur pose-b uilt, compact, handle-style mobile computer Operating System: Windows Mobile 5.
3 - 18 Pow er Battery: Main: Lithium-ion 7.4V , 14.8 W att-hour , hot-sw appab le batter y pac k Backup: Internal 3.6V nick el metal h ydride (NiMH) batter y sa v es RAM data f or 30- minutes during main batter y change Run Time (estimated): WLAN: 10+ hours at 1 scan/6 sec , 1 data package logged e very scan, 802.
4 - 1 4 Using the K e yboar ds Overview The ke yboard buttons are recessed under the ov er la y f or maxim um durability . The ke yboard panel is backlit f or maximum view ability in v arious lighti ng conditions.
4 - 2 Using the Function Ke ys Function keys perform specific functions and usuall y have the name of the function they perform. Note: There is no SCAN key on the Dolphin 7850 terminal keyboard; scanning is initiated with the Scan Trigger (page 3-6). Name Ke y Function Backlight T oggles the ke yboard bac klight on and off .
4 - 3 Using the Navigation K e ys Located in the center of each keyboard for easy ac cess with either hand, the navigation keys enable you to navigate the cursor through an application screen. The navigation keys perform additional system functions when pressed in combination with the Blue and Red modifier keys.
4 - 4 24-Ke y K e yboar d T oggling Between Alpha and Numeric Modes The 24-key keyboard defaults to numeric mode. Nu meric mode is when you type numbers with the number keys. • Double-tap the Blue modifier key to toggle between alpha and numeric modes.
4 - 5 *T oggles uppercase and lowercase only on a doub le-tap . **Single-tap SFT changes the mode f or only the ne xt c haracter . Double-tap SFT k e y to change mode f or all ke ys pressed after . ***T oggles numeric and alpha modes only on a double-tap .
4 - 6 *T oggles uppercase and lowercase only on a doub le-tap . **Single-tap SFT changes the mode f or only the ne xt c haracter . Double-tap SFT k e y to change mode f or all ke ys pressed after . ***T oggles numeric and alpha modes only on a double-tap .
4 - 7 38-Ke y K e yboar d T oggling Between Numeric and Alpha Modes The 38-key keyboard defaults to numeric mode. Nu meric mode is when you type numbers with the number keys. Alpha mode is when you type the letter indicated on the overlay when you press the number key.
4 - 8 38-Ke y K e yboar d Alpha K ey Combinations Ke y Blue Mode Alpha Base Alpha Shift Alpha Caplock Alpha Shift Caplock ESC Delete ESC ESC ESC ESC SFT *T oggle Upper/ Lower/Shift *T oggle Upper/ Low.
4 - 9 *T oggle Upper/Lower only on a doub le-tap . **Single-tap of SFT ke y changes shift mode f or just the ne xt character . Double-tap of SFT k e y toggles Caplock. ***Single tap of BLUE ke y changes mode f or just the ne xt character . Doub le tap toggles Num/Alpha.
4 - 10 38-Ke y K e yboar d Numeric K ey Combinations Ke y Blue Mode Num Mode Num Shift ESC Delete ESC ESC SFT *T oggle Upper/Lower/Shift *T oggle Upper/Lower/Shift *T oggle Upper/Lower/Shift Blue Blue.
4 - 11 *T oggle Upper/Lower only on a doub le-tap . } / /{ F1 F1 F1 F2 *F 2 F 2 F3 @F 3 F 3 F4 #F 4 F 4 F5 F5 F5 F6 F6 F6 F7 F7 F7 F8 F8 F8 F9 F9 F9 F10 F19 F10 38-Ke y K e yboar d Numeric K ey Combi.
4 - 12.
5 - 1 5 Using the Imager Scanner Engine Overview The compact imager scanner engine uses Adaptus ® Imaging Technology 5.0, which instantly reads all popular 1D and 2D bar codes and supports omni-directional aiming and decoding. This engine can also capture digital images, such as signatures and pictures of damaged inventory.
5 - 2 A vailab le Laser Engines Laser Specifications The maximum power outputs for each diode are as follows: • Illumination LED: 194.0 uW • Aimer laser (5300 engine): 360.1 uW • Aimer LED (5100 engine): 81.6 uW High Performance (HP) 5 mil 55 mil reflective W orking Range: Near 2.
5 - 3 Suppor ted Bar Code Symbologies Symbology T ype Symbology Name 1D Symbologies Codabar Code 3 of 9 Code 11 Code 32 Pharmaceutical (P ARAF) Code 93 Code 128 EAN with Add-On EAN with Extended Coupo.
5 - 4 Activ ating the Engine The scan trigger on the front of the integrated pistol-grip handle that activates the scan engine. Using Demos Demos are software utilities loaded on all Dolphin te rminals that demonstrate the advanced features of the terminal.
5 - 5 Decoding The Dolphin terminal supports two types of image decoding: full-area imaging and Advanced Linear Decoding (ALD). Full-area Imaging Full-area imaging means that the Dolphin termi nal support omni-directional aiming, which means that a positive read can be obtained from many positions.
5 - 6 Omni-Directional Scanning Dolphin terminals support omni-directional scanning. In general, the aiming pattern or beam is smaller when the terminal is held closer to the bar code and larger when farther from the bar code.
5 - 7 Capturing Images The image-capture process is an intuitive, split-second operation for experienced users. By following basic guidelines, however, new users can easily deve lop their own technique and, with practice, quickly learn to adapt to different application environments.
5 - 8.
6 - 1 6 System Settings Overview Customizable settings are available from the Start menu. Tap Start > Settings and the Settings screen opens displaying the Personal tab. Settings consists of three tabs: Personal, System, and Connections. T ab Description Personal The P ersonal tab provides access to personal configuration programs .
6 - 2 P er sonal Settings To access the Personal tab, go to Start > Settings . The screen opens displaying the Personal tab. Note: Personal settings are stored in RA M memory and are replaced by system def aults after each hard reset. For more information about resets, see Resetting the Terminal on page 3-15.
6 - 3 Buttons The Buttons setting programs keyboard buttons to laun ch applications or execute commands. The default button assignments that appear on the Buttons window are inactive until you enable the HotKeys Power Tool. You must enable the HotKeys Power Tool to activate the button assignments in the Buttons setting.
6 - 4 Commands The Assign a program list also contains the following commands: Input P anel Options You can set input options by going to Start > Settings > Personal tab > Input .
6 - 5 Menus - Modifying the Start Menu You can add existing programs you use often, such as File Explorer, to the Start menu for faster access. You are not installing the program, just enabling th e user to access the program from the Start menu.
6 - 6 3. Navigate to the Windows folder and open the Start Menu folder (My Device > Windows > Start Menu), tap and hold a blank area of the window, and tap Paste Shortcut on the pop-up menu. 4. The shortcut is now in the folder. 5. Tap the Start menu to verify that the program now appears on it.
6 - 7 System Settings The System tab enables you to verify and sometimes alter system parameters. To access the System tab, go to Start > Settings > System tab.
6 - 8 Backlight The backlight for the color display is user-defined. Tap Start > Settings > System tab > Backlight .There are two tabs: Battery and External ; the options on each tab are the same. The Battery tab determines display backlight settings when the terminal is running on battery power.
6 - 9 Cer tificates Certificates shows you the network certificates re cognized by the operating system. There are personal and root certificates; each has its own tab. It is important to verify that the operating system acknowledges your certificate.
6 - 10 Memory Dolphin terminals have two types of memory: volatile and non-volatile. Each type of memory has its own options. V olatile Data stored in volatile memory does not persist through cold boots; see Hard Reset (Cold Boot) on page 3-15.
6 - 11 Storage Card Tab This tab displays the current capacity and usage statistics of the selected memory type: IPSM or Storage Card. Select the memory type from the drop-down list. IPSM is selected by default. Running Programs Tab This tab displays the running software programs using storage memory.
6 - 12 Anytime you stop a running program, it frees up volatile memory. Be advised that, when you stop a program here, any unsaved data in that program is lost. To free up memory without risking data loss, return to the running program, save your data, and close the application.
6 - 13 Regional Settings Regional Settings enables you to customize the appe arance and formatting to your geographic region. Specifically, you can customize numbers (i.e., number of decimal places allowed), currency (i.e.,using the $ or € € symbol), time, and date.
6 - 14 Remove Pr ograms The Remove Programs settings enables you to remove programs installed on the terminal. Use this setting to troubleshoot when you receive messages that the device is out of memory. The programs removed in the Remove Programs settin g are removed from volatile memory.
6 - 15 Screen Note: By default, dynamic screen rotation (i.e., the ability to switch between landscape and portrait orientation) is disabled on Dolphin 7850 terminals. Alignment Tab Tap Align Screen to re-align the screen. Remember, you first align the screen at bootup.
6 - 16 This is the default font size setting. To change the font size, move the slider toward Smallest or Largest . The Example text changes to reflect the font change.
7 - 1 7 Comm unication Comm unication Options Dolphin terminals offer a number of communication opt ions including Microsoft ActiveSync, infrared, and wireless radios.
7 - 2 Default COM P or t Assignments The Dolphin terminal ships with the COM ports assigned as follows: Installing Additional Software Dolphin terminals ship with the operating system, ra dio drivers, and custom Honeywell software loaded onto the device.
7 - 3 Using ActiveSync ActiveSync communication happens through th e I/O connector on the bottom panel (see I/O Connector on page 3-9) when the terminal is connected to a Dolphin communication peripheral such as the Dolphin HomeBase device or a charge/communication cable.
7 - 4 Setting Up the T erminal When communicating via ActiveSync, your terminal is designed to be connected to the host workstation with a Honeywell communication peripheral. We recommend use of Honeywell peripherals, power cables, and power adapters.
7 - 5 1. Download the program to the workstation from eith er the Internet or the installation CD. You may see a single *.exe or setup.exe file, a *.cab file, or *.dll. (There may also be several versions of files for different device types and processors.
7 - 6 Connections T ab The Connections Tab of Windows Mobile Settings prov ides access to the configuration settings for many of the terminal’s communication options. Tap Start > Settings > Connections tab. Note: The programs that appear on the Connections tab depend on the terminal’s radio configuration.
7 - 7 Connecting the T erminal to a Wireless Network Establishing the terminal on a wireless network depend s heavily on your network infrastructure. You will need specific information from your network administrator. Whatever your network specifics, some general steps apply: 1.
7 - 8 Using Infrared Comm unication The IrDA port sends and receives data between th e terminal and other devices equipped with infrared. The maximum data transfer speed is 115 Kbps with a duty cycle of 18.75%. IrD A P ort Location V erify Beam Settings By default, the IrDA port is enabled after each hard reset.
7 - 9 3. Tap and hold the item and select Beam File . 4. The information begins transmitting to the other infrared device. Receiving Data 1. Verify that the terminal is set to receive all incoming beams; see Verify Beam Settings on page 7-8. 2. Align the IrDA ports.
7 - 10 Connections Manager The connections manager sets up various network conn ections to Internet Service Providers (ISPs) via an external modem. If you are using one of the on-board wireless radios to connect to a network, do not enter network parameters in the connections manager.
7 - 11 Proxy Server Connections If you are connected to your ISP or private network during synchronization, the terminal should download the proper proxy settings during synchronization with the workstation.
7 - 12 Netw ork Car ds The Connections tab (see Connections Tab on page 7-6) contains a Network Cards icon that displays the network cards installed in the terminal. 1. Tap Start > Settings > Connections > Network Cards 2. Tap on an adapter in the list to review its settings.
7 - 13 Radio Manager The Radio Manager enables and disables the radio dr ivers installed in the terminal. When a radio is enabled, the radio is transmitting a signal. When disabled, the radio is not transmitting a signal. At least one radio must be enabled before you can set the termi nal up on a wireless network.
7 - 14 Radio Manager Window Disabling Radios To power down all radios, select None and tap Apply . All radios are disabled. Field Description Radio Modes Displa ys the radio hardw are modules currently installed on the terminal. Status Field Provides f eedbac k on the state of the radio .
7 - 15 USB to PC The USB to PC applet enables you to switch between RNDIS (Remote Network Driver Interface Specification) USB and Serial USB communication. Dolphin 7850 terminals default to Serial US B. Honeywell recommends using Serial USB. To change this setting, tap Start > Settings > Connections tab > USB to PC .
7 - 16.
8 - 1 8 Wireless P AN Comm unication with Bluetooth Bluetooth Radio The on-board Bluetooth radio is enabled by default at startup and operates within the 2.4 GHz–2.48 GHz band. Bluetooth transmissions hop between 79 separat e frequencies 1,600 times every second, and with a communication range of about 10 meters (class II).
8 - 2 Accessing BTExplorer When the Bluetooth radio is enable d, the Bluetooth icon on the Today screen appears as follows . Tapping this icon once opens BTExplorer to the Favorites window.
8 - 3 Using BTExplorer BTExplorer has a New Connection Wizard for each ty pe of Bluetooth connection you want to make; see Connection Types on page 8-7. You open BTExplorer, select the connection type, BTExplorer scans for matching devices and services, and the connection wizard walks you through the connection process.
8 - 4 4. Click Next and BTExplorer scans for other Bluetooth devices in range and displays the search results. 5. Select a device and click Next . BTExplorer attempts to connect to the selected device and explore the device’s available services. 6. Select a service in the list and tap Next.
8 - 5 b. Review the contents of the window and tap Next . The connection summary appears. 7. Tap Connect . If you are transferring files, the next steps are to select the file(s) and transfer them to the device.
8 - 6 Favor i t es BTExplorer enables you to save connections to spec ific devices and the services on those devices as Favorites. Each time you try to connect to a device and service manually, you are asked if you want to save the connection as a Favorite.
8 - 7 Connection T ypes Connection T ype Allows the Bluetooth radio to… Requirements Explore Services on Remote Devices Discov er a v ailab le ser vices . Discover able Bluetooth de vices with activ ated ser vices must be in r ange f or the terminal to retr ie v e de vices and ser vices .
8 - 8 Device T y pes BTExplorer supports the following device types: • Audio Devices • Network Devices • Phones • Printers • Computers • OBEX Devices By default, BTExplorer scans for Network Devices . To change the, device type, tap on the arrow to the right of the heading on the left.
8 - 9 Menu Options The discovered devices window has a popup menu th at enables you to perform several tasks. You can select a device and tap and hold or just tap and hold on an empty space; he same menu appears. Certain menu items are enabled or disabled depending on which method you use.
8 - 10 Disco vered Devices In order for the terminal to find a device when scannin g, that device must be Discoverable by Bluetooth. If not, the terminal won’t find the device when scann ing. Furthermore, the device must have activated Bluetooth services.
8 - 11 2. Set Discoverable Mode to Discoverable . Set Connectable Mode to Connectable . You must change both for the terminal to be discoverable. 3. To activate specific services, tap the Services tab and tap Add. 4. Select a service and tap OK to add.
8 - 12 5. Each service you select is going to take you thro ugh a series of windows to confirm the parameters of the service. For example, for the file transfer service, the following window appears: 6. Tap OK and you are returned to the prior window, which now displays the service as active.
8 - 13 P airing Pairing associates Bluetooth devices with each other so that you don’t have to enter access information every time a connection is requested. Bluetooth devices need to be paired with each other before attempting a connection the first time.
8 - 14.
9 - 1 9 Dolphin HomeBase Device Overview As the hub of your system, the Dolphin HomeBase ch arging and communication cradle supports both RS- 232 and USB communication, enabling your terminal to interface with the majority of PC-based enterprise systems.
9 - 2 Fr ont P anel AUX Battery LED Indicates status of the battery charging in the auxiliary battery well; see page 9-4. Orange The auxiliary battery is charging.
9 - 3 Bac k P anel Auxiliary Battery Well The auxiliary battery well charges an additional Li-ion battery pack independently of the terminal well. This feature ensures that you ca n always have a fully-charged battery for your terminal; see Charging a Spare Battery Pack on page 9-4.
9 - 4 Charging a Spare Battery P ack The Auxiliary Battery Well (see page 9-3) located on the back panel charges a spare battery. The AUX Battery LED (page 9-2) on the front panel indicates the charge status of the battery in this well. Charge time is less than four(4) hours and the charge process is independent of the terminal well.
9 - 5 Po w e r The terminal requires 9.5 volts DC input for communica tion and battery charging; the power adapter on the power cable converts the voltage from the power source to 9.5 volts DC. Only power adapter cables from Honeywell convert the voltage appropriately.
9 - 6 RS-232 Serial Connector The following diagram displays the pins of the RS-232 serial connector of the Back Panel (see page 9-3): Note: Signals referenced are for a DTE device. The base is at a right-angle to the printed circuit board (PCB). The ninth pin has a ring indicator (RI).
9 - 7 Charging the Main Battery The base powers the terminal and fully charges its main battery pack in less than four(4) hours. To check battery power, see Power on page 6-12. As battery packs charge, the charging circuitry follow s the two-step charging process (CC-CV) that is recommended for Li-ion batteries.
9 - 8 ActiveSync Comm unication The Dolphin terminal ships with ActiveSync already installed and defaulted to USB communication. If ActiveSync is not installed on your workstat ion, you must install it. For details, see Using ActiveSync on page 7-3. Comm unication T ypes The base can communicate via USB or RS-232 using Acti veSync 4.
9 - 9 RS-232 Cables Connect the base to the host workstation or other device by plugging an RS-232 serial cable into the RS- 232 Port (see page 9-3) on the back panel. The wiring of your cable depends on whether the other device is set up as a Data Communication Equipment (D CE) or Data Terminal Equipment (DTE) device.
9 - 10 Mounting Set the base on a dry, stable surface, such as a deskt op or workbench near an electrical outlet. Be sure to provide enough workspace with good lighting for the user to view and operate the terminal while it is seated in the base.
9 - 11 W all Mounting You can purchase a wall mount kit that contains • a mounting bracket, • three screws, and • six washer/nut sets. The back wedge of the mounting bracket contains an open slot for the power and communications cables.
9 - 12.
10 - 1 10 Dolphin QuadChar ger Device Overview The Dolphin QuadCharger device is a four(4)-slot chargi ng station that can charge a Li-ion battery in less than four(4) hours. The fourth slot features a battery analyzer that completely resets and re-calibrates a battery and displays its resulting capacity.
10 - 2 Fr ont P anel Charging Slots There are four(4) charging slots. Each slot ho lds one battery. When a battery is placed in a slot, it immediately begins charging. Charge/Analyze Slot This is the fourth slot and the only one that can be used to analyze a battery.
10 - 3 Bac k P anel Power Supply Connector Use this connector to attach the power supply to the charger. The universal power supply accepts input voltages between 90-265 volts.
10 - 4 Charging Batteries For best results, battery packs should be at ro om temperature before recharging them because temperature impacts charging. The recommended temperature range is 50° to 95° F (10 ° to 35 ° C). 1. Supply power and turn the po wer switch to the ON position.
10 - 5 Using the Battery Analyzer The fourth charging slot is also the CHARGE/ANALYZE slot because, in addition to charging a Li-ion battery, this slot runs an Analyze cycle on the battery placed in it, which helps you monitor battery capacity over time.
10 - 6 Bottom P anel Mounting The charger should be on a dry, stable surface. To easily adapt the charger to your environment, it can be mounted on a flat, horizontal surface such as a de sktop or workbench, or a flat, vertical surface such as a wall.
10 - 7 T roub leshooting If you encounter problems with your charger, refer to chart below for possible solutions. If problems persist, please contact Limited Warranty (see page 13-2). Prob lem Issue The Status LED does not come on when I inser t a batter y pac k.
10 - 8.
11 - 1 11 Dolphin Char geBase Device Overview This four-slot charging cradle that can power four(4) Dolphin terminals, and charge their main batteries in less than four(4) hours.
11 - 2 Fr ont P anel Terminal Wells The ChargeBase contains four(4) terminals wells. Each terminal well • Holds and charges the main battery pack of one Dolphin terminal. • Contains the companion to the I/O connect or on the bottom panel of Dolphin terminals.
11 - 3 Bac k P anel Power Supply Connector This connector receives input from the power adapter. Plug the power connector cable from the power adapter into this connector. There is no ON/OFF switch on the back panel of the base. The ON/OFF switch is on the power adapter.
11 - 4 Supplying P ower to the ChargeBase Use only the peripherals, power cables, and power adapters from Honeywell. Use of peripherals, cables, or power adapters not sold/manufactured by Honeywell may cause damage not covered by the warranty. 1. Be sure the power switch on the po wer adapter is in the OFF position.
11 - 5 Charging T erminals in the ChargeBase The ChargeBase charges the main battery of each terminal in less than four(4) hours. The intelligent battery charging system incorporated in the Dolphin te.
11 - 6 Mounting the ChargeBase The ChargeBase should be placed on a dry, stable surface. To easily adapt the ChargeBase to your environment, it can be mounted on a flat, horizontal surface such as a desktop or workbench, or a flat, vertical surface such as a wall.
11 - 7 2. Turn the ChargeBase and DIN Rail right side up. 3. Secure the DIN Rail to a stable, flat horizontal surface..
11 - 8 W all Mounting You need to purchase two wall mount kits that each contain: • a mounting bracket, • three screws, and • six washer/nut sets. You need two kits so that you have two mounting brackets–one for each end of the device–and enough screws (4) and washer/nut sets (8).
12 - 1 12 Cables Kits Cables There are several cable kits for Dolphin 7850 terminals. We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty.
12 - 2 Using the P ower Cable The Power Cable connects the terminal to an external power source via the DC jack on the bottom panel of the pistol-grip handle. The Power Cable contains a power ad apter that converts the voltage fr om the power source to 9.
12 - 3 Using the Mobile Charger The Mobile Charger connects the te rminal to a vehicle power source. This cable powers the terminal and charges the main battery pack. Terminal Connector The terminal connector connects the communication cable to the I/O connector (see I/O Connector on page 3-9) on the terminal.
12 - 4 Using the Comm/Charge Cable The Comm/Charge cable charges the terminal and co mmunicates with a host workstation. There are three connectors: one connects the terminal to an exte rnal power source, another to the host workstation, and another to the terminal itself.
12 - 5 Using the Comm/Charge Cable 1. Plug the cable’s terminal connector into the I/O connector on the bottom panel of the terminal. 2. Tighten the jackscrews. 3. Plug the power cable connector into the power cable. 4. Plug the power adapter on the power cable into a standard power outlet.
12 - 6.
13 - 1 13 Customer Suppor t and W arranty T echnical Assistance If you need assistance installing or troubles hooting your device, please call your distributor or the nearest technical support office: North America/Canada Telephone: (800) 782-4263 E-mail: hsmnasupport@honeywell.
13 - 2 Latin America Telephone: (803) 835-8000 Telephone: (800) 782-4263 Fax: (239) 263-9689 E-mail: laservice@honeywell.com Brazil Telephone: +55 (11) 5185-8222 Fax: +55 (11) 5185-8225 E-mail: brservice@honeywell.com Mexico Telephone: 01-800-HON EYWELL (01-800-466-3993) Fax: +52 (55) 5531-3672 E-mail: mxservice@honeywell.
13 - 3 contacting HII. In the event that the product is return ed to HII or its authorized service center within the Warranty Period and HII determines to its satisfaction that the product is defectiv.
13 - 4.
.
™ Honeywell Scanning & Mobility 9680 Old Bailes Road Fort Mill, SC 29707 www.honeywellaidc.com 7850-UG Rev E 5/10.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Honeywell 7850 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Honeywell 7850 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Honeywell 7850 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Honeywell 7850 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Honeywell 7850, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Honeywell 7850.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Honeywell 7850. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Honeywell 7850 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
