Manuale d’uso / di manutenzione del prodotto 6500 del fabbricante Honeywell
Vai alla pagina of 90
Dolphin ™ 6500 Mobile Computer with Windows ® CE 5.0 User’s Guide.
.
Disc laimer Honeyw ell International Inc. (“HII”) reser v es the right to make changes in specifications and other inf or- mation contained in this document without prior notice , and the reader should in all cases consult HII to deter mine whether an y such changes ha v e been made.
.
iii Chapter 1 - Agency Approvals Label Locations ................................................. ............................................................... ....1-1 Safety & RF Approvals by Country: ................ .........................
iv Chapter 5 - Using the Image Engine Overview ................................ ....................................................................................... ....... 5-1 Available Image Engines .................................... ..........
v Chapter 10 - Dolphin QuadCharger Device Overview ................................ ....................................................................................... ..... 10-1 QuadCharger Device ................................... .............
vi.
1 - 1 1 Agency Appr ov als Label Locations Dolphin 6500 mobile computers meet or exceed the requirements of all applicable standards organizations for safe operation. However, as with an y electrical equipment, the best way to ensure safe operation is to operate them according to the a gency guidelines that follow.
1 - 2 Safety & RF Appr ov als by Country: * Does not apply to IS4813 laser engine. R&TTE Compliance Statement—802.11b/g and/or Bluetooth Dolphin RF terminals are in conformity with all esse ntial requirements of the R&TTE Directive (1999/5/ EC).
1 - 3 Laser Safety Label If the following label is attached to your product, it indicates the product contains an imager engine with a laser aime r (5300) or a laser engine (IS4813). Laser Eye Safety Statement: This device has been te sted in accordance with and complies with IEC60825-1: 1993+A1+A2 and 21 CFR 1040.
1 - 4 This device and its antenna must not be co-loc ated or operating in conjunction with any other antenna or transmitter. To maintain compliance with FCC RF exposure guidelines for body- worn operation, do not use accessories that contain metallic components.
2 - 1 2 Getting Star ted Out of the Bo x Verify that your carton c ontains the following items: • Dolphin 6500 mobile computer (the terminal) • Main battery pack (3.
2 - 2 5. Replace the hand strap. We recommend use of Honeywell Li-Ion ba ttery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. Step 2. Charge the Batteries We recommend use of Honeywell peripherals, po wer cables, and power adapters.
2 - 3 *The power adapter on the power cable converts the voltage from the power source to 5 volts DC. Only power adapter cables from Honeywell convert the volt age appropriately. The powe r cable contains a plug adapter for each geography (US, UK, EU, etc.
2 - 4 Command Bar Icons The command bar, located at the bottom of appl ication screens, provides access to many system functions and programs. Icon Meaning Opens the Star t menu. T ap to change vie ws between open applications or to retur n to the desktop .
2 - 5 Using the Stylus The terminal comes with a stylus included in a loop on the hand strap. Use this stylus (or your finger) to select or enter information on the touch screen. The st ylus functions as a mouse; generally, a tap is the same as a click.
2 - 6 Selecting Pr ograms Tap Start > Programs . To open a program, tap the icon on the menu. P op-Up Menus You can quickly choose an action fo r an item using the pop-up menus. 1. Tap and hold the stylus on the item name. The pop-up menu appears. 2.
3 - 1 3 T erminal Har dware Overvie w Dolphin 6500 terminals include a number of standard terminal configurations as well as charging and communication peripherals and accessories to maxi mize the efficiency of your application setting. Standar d T erminal Configurations There are two standard Dolphin 6500 configurations: WPAN only and WPAN/WLAN.
3 - 2 Fr ont P anel Features Scan/Decode LED The LED lights red when you press the Sc an trigger in scanning applications. The LED lights green when a scanned bar code is successfully decoded. The LED lights red while the main battery is charging. The LED lights green when the main battery charging is completed.
3 - 3 For touch screen input, use the stylus included with the terminal or your finger. The method you choose depends on which one is most approp riate for your application. While there is a great deal of variation in different applicatio ns, you generally achieve greater accuracy with the stylus for buttons or icons that are close together.
3 - 4 Replacement screen protectors can be purchased dire ctly from Honeywell. Contact a Honeywell sales representative for details. Honeywell also mandates use of a proper stylus, which is one that has a stylus tip radius of no less than 0.8mm. Use of the Honeywell stylus included with the terminal is recommended at all times.
3 - 5 2. Clean the touch panel thoroughly with a clean, non-abr asive, lint-free cloth. Make sure nothing is on the touch panel. 3. Release the left edge of the backing paper on the screen protector. 4. Align the exposed edge of the screen protector along the left edge of the touch panel.
3 - 6 6. Pull smoothly and evenly from left to right unt il the screen protector is applied. Press gently but firmly. Use the card as necessary to smooth out any air pockets or bumps after application. 7. Press the Power key to wake the terminal and check the touch panel with the stylus.
3 - 7 12. For maximum performance, recalibrate the screen. Tap Start > Settings > Control Panel > double tap Stylus > Calibration tab. 13. Tap Recalibrate and follow the instructions on the screen.
3 - 8 Bac k P anel Features Hand Strap The Dolphin 6500 comes with an adjustable, elastic hand strap. The strap is attached to the device with the two small screws. It is threaded through the slot on the bottom of the back of the unit. Keep in mind that the hand strap covers the ba ttery.
3 - 9 • 4KHz–72db Stylus Dolphin 6500 terminals ship with a stylus inserted in a loop on the hand strap. Store the stylus in the hand strap when you’re not using it; see Using the Stylus on page 2-5. Installing Memory Cards The Dolphin 6500 supports Secure Digital (SD) memo ry cards from 512MB up to 8GB in capacity.
3 - 10 Left Side P anel Features Side Button There is a button like this on both side panels . You can use the Programs Buttons option in the Control Panel to change the functionality of the side buttons. Headset Jack The rubber door on the right side panel provides access to the headset jack.
3 - 11 Bottom P anel Features DC Power Jack The DC power jack receives external power from the Dolphin power cable that is included in the box with the terminal. When connected to the Dolphin power cable, the terminal is powered and the main battery pack is charging.
3 - 12 Dolphin HomeBase ™ Device This charging and communication cradle supports USB and RS-232 communication, enabling your terminal to interface with the majority of enterprise systems. When a terminal is seated in a powered base, its main battery pack charges in an average of 5 1/2 ho urs for a fully depleted battery.
3 - 13 Main Battery P ack We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. The Dolphin 6500 has a Li-Ion 3.7V/3300 mAh/12.2 Wh battery pack. The Li-Ion battery pack is the primary power source fo r the Dolphin terminal as well as the internal backup battery.
3 - 14 Managing Main Battery P ower Data and files saved on the Dolphin terminal may be stored in RAM memory; therefore, maintain a continuous power supply to the term inal to help prevent data loss. When you remove a battery pack, insert another charged battery pack in the Dolphin.
3 - 15 • Excessive discharge damages a battery. Recharge the battery when your terminal indicates low battery power. • If you observe that the Honeywell battery supplied is physically damaged in some way, send it to Honeywell International Inc. or an authorized service center for inspection.
3 - 16 You would perform a soft reset 1) when the termina l fails to respond, 2) after installing software applications that require a reboot, 3) after making changes to certain sys tem settings, or 4) to install new CAB or REG files. The desktop appears when th e Soft Reset is complete.
3 - 17 1. Tap Start > Settings > Control Panel > System > Memory tab. 2. Move the slider to adjust the memory allocation and tap OK . The changes take effect immediately. Care and Cleaning of the Dolphin T erminal When needed, clean the image or laser engine window and the LCD display with a clean, non-abrasive, lint-free cloth.
3 - 18 Backup Battery 100mAh Li-P olymer Ion (5300SR) or 145mAh (IS4813) Expected Hours of Operation 3300mAh battery pack: 12 hour s (5300SR)/11 hours (IS4813) (with scan e very 2 seconds) Battery life varies with application and use case .
3 - 19 Regulatory and Compliance Safety: UL60950-1, cUL 60950, IEC 60825-1:1993+A1:1997+A2:2001 , NOM-019, EN60950, CCC , PSE, EMC: FCC P ar t 15, Sub par t B , Sub P ar t C, ICES-003, RSS 210, EN 550.
3 - 20.
4 - 1 4 Using the K eypad Overview The 28-key and 52-key keypads are as follows: Navigation K eys The navigation keys enable you to move the cursor up and down lines and from character to character.
4 - 2 Basic Ke ys Alpha/Numeric Modes 28-key keypad: The keypad defaults to numeric mode. Use the ALPHA key to toggle between numeric and alpha modes. Pressing the ALPHA key locks the keypad in numeric mode, alpha mode (lowercase), or alpha mode (uppercase).
4 - 3 Note that when typing in alpha mode on the 28-k ey Dolphin 6500, you must use the same multi-press method you would use when typing le tters on a phone keypad. Each key press types the next letter in the sequence as displayed by the alpha indicator.
4 - 4 CTRL Ke y Combinations On the 28-key keypad, hold down the Control key ( CTRL ) and then press a key with the red characters below it to type the desired character. On the 52-key keypad, press the Blue button and then press a key with th e blue text to the upper left of it to type the desired characte r.
4 - 5 Pr ogram Buttons Buttons can be programmed to execute different f unctions using the Program Button program in the Control Panel. The following buttons on the 28-key keypad are programmed for the listed function.
4 - 6.
5 - 1 5 Using the Image Engine Overview The Dolphin 6500 houses a compact image engine using Adaptus ™ Imaging Technology that instantly reads all popular 1D and 2D bar codes and supports omni-directional aiming and decoding. The image engine can also capture digital images , such as signatures and pictures.
5 - 2 Suppor ted Bar Code Symbologies Symbology T ype Symbology Name 1D Symbologies Codabar Code 3 of 9 Code 11 Code 32 Pharmaceutical (P ARAF) Code 93 Code 128 EAN with Add-On EAN with Extended Coupo.
5 - 3 Activ a ting the Engine When a scanning application is open, press the Scan key to activate the image engine. Using Demos Dolphin Demos are software utilities loaded on all Dolphin terminals that demonstrate the advanced features of the terminal.
5 - 4 Sample Bar Codes You can use the following bar codes to verify decoding: Omni-Directional Scanning P ositions The high-vis aiming pattern frames the bar code to provide you with the best scanning performance. Note: To achieve the best read, the aiming beam shoul d be centered horizontally across the bar code.
5 - 5 Capturing Images The image-capture process is an intuitive, split-second operation for experienced users. By following basic guidelines, however, new users can easily deve lop their own technique and, with practice, quickly learn to adapt to different application environments.
5 - 6.
6 - 1 6 Using the Laser Engine Overview The Dolphin 6500 (IS4813 laser version) contains a laser diode that emits a beam toward an oscillating mirror that scans through the code and the reflecte d light is bounced off of two mirrors back to the collector.
6 - 2 Activ a ting the Engine When a scanning application is open, press the Scan key to activate the laser engine. Using Demos Dolphin Demos are software utilities loaded on Dolphi n terminals that demonstrate the advanced features of the terminal. To access these demos, tap Start > Programs > Demos .
7 - 1 7 Comm unication Comm unication Options Dolphin terminals offer several communication opti ons including Microsoft ActiveSync and wireless radios.
7 - 2 Connecting the USB Charging/Comm unication Cable f or the Dolphin 6500 Slide the USB cable unit onto the bottom of the termin al lining up the terminal’s I/O connector to the cable unit’s connector to facilitate USB communication be tween the Dolphin terminal and the host workstation.
7 - 3 ActiveSync Comm unication To synchronize, ActiveSync 4.1 or higher must be installed and configured for the appropriate communication type on the host workstation and the Dolphin terminal. Dolphin terminals ship with ActiveSync already installed.
7 - 4 Setting Up the Dolphin T erminal The Dolphin terminal defaults to USB communication out of the box. To verify a nd/or change the default setting, tap Start > Settings > Control Panel > PC Connection . Tap Change Connection to change the current settings.
7 - 5 Exploring the T e rminal fr om the W orkstation When the terminal and desktop computer are connec ted, open the main ActiveSync window (on the desktop), and click Explore .
7 - 6 If the File is an Installer An installer program is one that installs to the wo rkstation and the terminal si multaneously; one process installs to both devices. 1. On the workstation, double-click the *.exe or *.setup.exe file. The installation wizard begins.
7 - 7 By default, the 802.11b/g radio is powered off (i.e., disabled) “out of the box.” To power it on (i.e., enable), press the vertical arrow (bottom, ri ght corner of screen) and select Turn Wireless LAN On . The enable/ disable state of the radio will survive subsequent soft and hard resets.
7 - 8.
8 - 1 8 Bluetooth Handler Bluetooth wireless technology is a short-range comm unications technology to connect portable and/or fixed devices while maintaining high levels of security. Enabling the Bluetooth Radio 1. Select the UP arrow in the lower, right portion of the display.
8 - 2 OR Wait until all Bluetooth devices in range have been scanned. Then the Scan Dialog window appears. 6. Scroll through the list until your Bluetooth printer device is found. You may single tap any device in the list to display its MAC address. 7.
9 - 1 9 Dolphin HomeBase/eBase De vice Overview Note: The information in this chapter applies to both the Dolphin HomeBase and Dolphin eBase devices unless otherwise indicated. As the hub of your Dolphin 6500 system, the Dolp hin HomeBase charging and communication cradle supports full-speed USB 1.
9 - 2 Fr ont P anel Terminal Well Place the Dolphin terminal in the terminal well to communicate with a host device, power the terminal, and charge the terminal’s battery. Make sure that the device is securely seated. Rubber Feet The bottom panel has four rubber feet to stabilize the unit on a flat surface.
9 - 3 Bac k P anel DC Power Jack Connect the power cable to this power jack; see Powering the Dolphin HomeBase Device on page 9-4. USB Port The USB port is full-speed (v1.1). Using the USB cable, you can connect the base to a USB- compliant device to facilitate USB communi cation to and from the terminal.
9 - 4 P owering the Dolphin HomeBase De vice The terminal requires 5 volts DC input for communica tion and battery charging; the power adapter on the power cable converts the voltage from the power sour ce to 5 volts DC. Only power adapter cables from Honeywell convert the voltage appropriately.
9 - 5 Charging the Main Battery The base powers the terminal and fully charges its main battery pack in an average of 5 1/2 hours for a fully depleted battery. It takes less time if the battery has some charge. As battery packs charge, the charging circuitry follows the two- step charging process (CC-CV) that is recommended for Li-Ion batteries.
9 - 6 Charging a Spare Battery The base can also charge a second battery while th e terminal is positioned in the base. The second battery can be inserted in the battery charging well in back of the terminal connection. Place the battery in the well with the label facing up and toward the back of the unit.
9 - 7 T echnical Specifications Structural Dimensions 5.3 in. high X 4.5 in. wide X 3.1 in. deep (13.5 cm. X 11.4 cm. X 7.9 cm.) We ig h t Dolphin HomeBase - 11.
9 - 8.
10 - 1 10 Dolphin QuadChar ger Device Overview The Dolphin QuadCharger device is a four-slot charging station that charges up to four Li-ion battery packs in an average of 5 1/2 hours for a fully depleted battery. It takes less time if the battery has some charge.
10 - 2 Battery Charging Charging Process This charger charges Dolphin 6500 Li-Ion 3300mAh pack s in an average of 5 1/2 hours for a fully depleted battery. It takes less time if the battery has some ch arge. Each charging slot works independently of the other three.
10 - 3 Recommendations f or Storing Batteries To maintain top performance from batte ries, follow these storage guidelines: • Avoid storing batteries outside of the specified tem perature range of -4 to 104°F (-20 to 40°C) or in extremely high humidity.
10 - 4 T echnical Specifications Structural Dimensions 7.3 in. long X 3.7 in. wide X 2.4 in. high (18.5 cm. X 9.4 cm. X 6.1 cm.) We ig h t 11.5 oz. (325g) Material Case: P olycarbonate Color : Blac k .
11 - 1 11 Dolphin 6500 Net Base Device Overview The Net Base enables up to f our Dolphin 6500 mobi le computers to communicate with a host de vice ov er an Ether net network. In addition, the Net Base provides a second RJ45 Ethernet por t f or connec- tion to an additional de vice such as a pr inter , w or kstation, eBase , or another Net Base.
11 - 2 P ar ts and Functions Front P anel Terminal Wells The Net Base contains four terminal wells. Ea ch well has its own dedicated Power/Dock LED and COMM LED indicator. Place the Dolphin terminal in any one of the four wells to communicate with a host device, power the terminal, and charge the installed battery pack.
11 - 3 Back P anel DC Power Jack Use the power cable from Honeywell that comes with the Net Base to supply power to this power jack. For more information, see Power on page 11-4.
11 - 4 Bottom P anel F or details on how to mount the Net Base, see Mounting the Net Base on page 11-6. Po w e r The ter minal requires 12 V olts DC input for commun ications and battery charging; the power adapter on the pow er cab le conv er ts the vo ltage from the pow er source to 12 v olts DC .
11 - 5 Charging the Main Battery The base provides po wer to the Dolphin ter minals and allo ws the charging of the main batteries in th e ter minals. The main battery of each ter minal charges in 4 hours f or the standard 3.7V batter y or 6 hours f or the extended 3.
11 - 6 3. Plug the Ethernet cable into the network. 4. Insert the Dolphin into one of the terminal wells. The DOCK LED for the well changes from red to green and the connection icon on the Dolphin’s title bar changes from to . 5. By default, the DHCP server assigns a unique IP address to each of the Dolphin terminals docked in the Net Base.
11 - 7 Bottom P anel Desk Mounting The DIN Rail (7.5 X 35 mm) slot on the bottom pane l enables secure mounting on a horizontal surf ace. Hardware Required • 3/16 in. dia x 5/8 in. long pan head screw • 1/2 in. OD x 7/32 in. ID x 3/64 in. thick • 3/16 in.
11 - 8 3. Then, using the appropriate nuts and bolts, secure the DIN Rail to a stable, flat horizontal surface. W all Mounting The optional wall mount br ack et enables secure mounti ng of the base on a v er tical surf ace. The wall mount brac ket can be used in conjunction with the DI N rail b ut does not require the DIN Rail for use .
11 - 9 2. Slide the bolt through the wall bra cket, and thread the toggle nut onto the bolt. 3. Press the ends of the toggle nut toget her, and insert the bolt/nut into the pilot hole until the nut clears inside wall surface. The toggle nut should spring open preventing the screw from being removed.
11 - 10 3. Slide the washer onto the screw and tighten the nut to secure the assembly. 4. Remove the rubber feet on the bottom of the Net Base. 5. Slide the base onto the DIN Rail using the slot on the bottom of the base. W all Bracket, Qty . 1 DIN Rail, Qty .
12 - 1 12 Dolphin 6500 Slide-On Handle Overview The optional slide-on handle provides a productivity-enhancing solution for applications that require high volume scanning, such as inventory management and stock replenishment. Removing the Hand Strap Prior to installing the Dolphin 6500 handle on the terminal, you must remove the hand strap.
12 - 2.
13 - 1 13 Customer Suppor t T echnical Assistance If you need assistance installing or troubleshooting your device, please contact us by using one of the methods below: Knowledge Base: www.hsmknowledgebase.com Our Knowledge Base provides thousa nds of immediate solutions.
13 - 2 HII’S RESPONSIBILITY AND PURCHASER’S EXCL USIVE REMEDY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT WITH NEW OR REFURBISHED PARTS.
.
™ Honeywell Scanning & Mobility 9680 Old Bailes Road Fort Mill, SC 29707 www.honeywellaidc.com 65-UG Rev B 5/12.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Honeywell 6500 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Honeywell 6500 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Honeywell 6500 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Honeywell 6500 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Honeywell 6500, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Honeywell 6500.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Honeywell 6500. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Honeywell 6500 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
