Manuale d’uso / di manutenzione del prodotto ST428MNW del fabbricante Hanns.G
Vai alla pagina of 39
S_ST428MNW_UM_EU_V02_H 1506-0EQE000 106,7 cm (42.02”) Liquid Crystal Display T elevision Flüssigkristallbildschirm Téléviseur à Écran à Cristaux Liquides TV de Pantalla de Cristal Líquido TV .
Table of Contents 1 English Regulatory Information ... ..................................................... ........ 3 Description of Warning Sy mbols . ......................... ........................ 3 Safety Notices .............. ..............
Table of Contents 2 English 2.3.5 Adjusting the Volume .................... .............. ............ 2 5 2.3.6 Editing the Favorit e List .......... ......................... ....... 2 6 2.3.7 Editing the Channel List .......... ...................
3 English R e gulator y Infor mation CE Conformity S tat ement This device is in conformity with the requirements of EU Council Directive 2004/108/EC on the approximation of the laws of the Member S t.
4 English Saf ety Notices Inst allation Safety N otes Location Avoid allowing the TV to get prolonged expo sure to sunlight or other strong sources of heat. Leave sufficient distance between the TV and the wall to provide enough space for the emission of heat.
5 English Personal Safety Installation 1. T o avoid o verloading th e power supply , never plug too many ele ctrical devices into an outl et, power strip, or extens ion cable. 2. Dangerous high-voltage electric power component s are located inside the TV .
6 English Preface Thank you for purchasing a Hannspree Liquid Crystal Display T elevision (LCD TV). Y our new TV will allow you to enjoy superior audio and video while enriching your lifestyle with advanced technology . Please carefully read this manual in it s entirety before setting up, using or operating your TV .
7 English Copyright © Copyright 2010 Hannspree, Inc. All rights reserved. This manual is prot ected by copyright and distributed under licenses restricting its use, copying and di stribution. No part of this manual may be reproduced in any form by any means without the prior wr itten authorization of Hannspree.
8 English 1 Getting Star ted 1.1 Pac kage Contents Make sure the following co mponents are included in the box. Please contact Hannspree Customer Service immediate l y if anything is missing or damaged.
9 English 1.2 Intr oducing the TV Y ou can watch SECAM/ P AL/ DVB-T broadcast, cable, or digital television channels, and easily connect a VCR, STB or DVD player to the SCART , HDTV ( Component ), A V(Composite), and HDMI input ports (locations of these ports depend on the model).
10 English 1.4 Contr ol Panel 1.5 Inpu t and Output Jacks Description Button Function Power Press to tu rn the TV on or o ff. Input source INPUT Press to select the proper input so urce. Menu MENU Press to open the OSD menu. Program select Press to increase the program number or move upward to the previous item on the OSD menu.
11 English Service Service only . Not available for users. S-Video Input Connect to an external device, such as a VCR, STB, or a DVD player . Composite Input (Video) Connect to an external device, such as a VCR, STB, or a DVD player . Composite Inputs (Audio) Connect to an external device, such as a VCR, STB, or a DVD player .
12 English 1.6 Remote Control SCART 2 IN Connect to an external device, such as a VCR, STB, or a DVD player with A V , S- Video, L/R IN. VGA (PC) Input Connect to a PC’s VGA port. PC Audio Input Connect to a PC’s line/audio port. HDMI 1 Input Connect a HDMI equipment or a HDMI- DVI adapter cable to devices such as a DVD player or set-top box.
13 English Keypad Use to select a program directly . Press 0-9 to enter the program numbers (press 1 and 0 for program 10 ). Pro.List Pro.LIST Press to display the program list. Last Press to return to the last channel selected. Information INFO 1. Press to display current channel/program information.
14 English Dual sound Press to change the multi sound selection of the TV channel. Select program Press P S to increase the program number . Press P T to decrease the program number . Red, Green, Y e llow , Blue Press the colored buttons to perform specific tasks in the OSD m e nu or teletext mode.
15 English Picture Mode Press continuously to toggle through all the picture settings: Vivid, S tandard, Movie, or User . Favorite channel Press to open favorite list menu and press / to select channels. Press OK to go to the selected channel. Freeze Press to pause a video frame on-screen.
16 English 1.7 Inser ting the Remote Control Batteries 1 Open the battery compartment cover at the back of the remote contr ol (A). 2 Insert the batteries paying attention to the polarity markings inside the battery compartment (B). 3 Replace the battery compartment cover (C).
17 English CAUTION • If the remote control is not used for a long period, remove the batteries and store them properly . • Handle damaged or leaking batteries carefully , and wash hands with soap if they come in contac t with leaked chemical fluids.
18 English 2 Setting up your TV 2.1 Basic Con nections 2.1.1 P ower Connection 1 Connect the p ower cord to th e AC IN input jack on the rear of the TV .
19 English 2.2 Conne cting Exter nal Devices Connect external devi ces such as VCRs, STBs, DVD players, video game consoles, earphones, or a PC to the TV using the ap propriate ports on the rear of the TV . 2.2.1 Connecting Exter nal Ear phon es Note: • Exte rnal speakers or headphones are n ot included with the TV .
20 English 2.2.2 Connecting to A V Devices The following diagram illustrates how to connect the A V devices to your TV via HDMI (A), YPbPr/AUDIO (B), SCAR T (C), A V/SV (D) ports. Note: • Plea se connect the audio ports shown in YPbPr/AUDIO (B) to audio ports of Component/YPbPr group in your A V device.
21 English 2.2.3 C onnectin g a V CR/ STB/ D VD Player Using Component V ideo/Audio, Composite Vide o/Audio, or S-Video/Audio Connect the TV to a VCR/ STB/ DVD pl ayer using three different types of video/audio inputs.
22 English 2.2.4 Connecting a PC using V GA Connect the TV to your PC to use it as the monitor using the VGA port as shown. 1 Connect the VGA port of the TV to the VGA outp ut of the PC. 2 Connect the line out port of the PC to th e PC Audio In port of your TV to listen to audio from the PC.
23 English 2.2.6 Connecting HDMI HDMI (High Definition Multimedia Interfa ce) assures that the best video signal is always sent from source to the TV . Refer to the following illustration to connect a HDMI device to the TV . 2.2.7 Connecting USB Service port, for DTV F/W update only .
24 English 2.2.8 C onnectin g a V CR/ STB/ D VD Play er using SCART Use the SCART ports to connect a TV , VCR, VCD, DVD pl ayer or video game console. Y ou can choose to use a SCART cable or adapter for the connection depending on the ports availa ble on your player .
25 English 2.3 Using the TV 2.3.1 T ur ning the TV On a nd Off 1 Press on the control panel or r emote control. The po wer LED indicator on the TV chan ges from red to gre en, indicating that the TV is on. 2 Press again. The p ower LED changes fro m green to red, indicating tha t the TV i s of f .
26 English 3 Press MUTE to eliminate sounds, and press MUTE again or press the volume buttons to restore the default volume. 2.3.6 Editing the Fa vorite List 1 Press MENU on the control panel or remote contr ol, then select to ent er the Channel me nu.
27 English 3 Adjusting On-Screen Display (OSD) Settings The On-Screen Di splay (OSD) menu system provides a quick and simple method to adjust the TV settings. The OSD menu ca n be accessed through the butto ns either on the control panel or the remote control.
28 English 3.1 O SD Setting Menus Follow the instructions indicated on the bottom of the OSD Function Menu. Press P S / P T on the control panel or / on the remote control to scroll through the menus. press INPUT / VOL+ on the control panel or OK on the remote control to select an item and then press MENU/ VOL- to exit the OSD menu .
29 English 3.3 Adjusting Audio Settings 1 Press MENU to enter th e OSD Main Menu screen. 2 Press / on the remote control or P S / P T on the control panel t o select Audio men u. 3 Press / OK on the remote control or INPUT / VOL+ on the control panel to enter the Audio me nu.
30 English 3.4 Adjusting Clock and Timer Settings 1 Press MENU to enter th e OSD Main Menu screen. 2 Press / on the remote control or P S / P T on the control panel t o select Clock and Timer menu. 3 Press / OK on the remote control or INPUT / VOL+ on the control panel to enter the Clo ck and Ti mer menu.
31 English 3.5 Adjusting Chann el Settings 1 Press MENU to enter th e OSD Main Menu screen. 2 Press / on the remote control or P S / P T on the control panel to select Channel menu. 3 Press / OK on the remote control or INPUT / VOL + on the cont rol pane l to enter the Channe l menu.
32 English 3.6 Adjusting PC Sett ing Options 1 Press MENU to enter th e OSD Main Menu screen. 2 Press / on the remote control or P S / P T on the control panel t o select PC Settin g menu. 3 Press / OK on the remote control or INPUT / VOL+ on the control panel to enter the PC S etting menu .
33 English 3.7 Adjusting Set up Settings 1 Press MENU to ente r the OSD Main Menu screen. 2 Press / on the remote control or P S / P T on the control panel t o select Setup m enu. 3 Press / OK on the remote control or INPUT / VOL+ on the control panel to enter the Se tup menu.
34 English 4 T r oubleshooting Situation Solution No picture and sound. • Connect the power cord properly . • Check if the power LED is on or not. • Press on the control panel or remote control. • Press Input to cycle through connected video sources.
35 English 5 Suppor t T iming PC Mode Support T iming Video Mode Support Timing Mode Resolution (active dot) Horizontal Frequency (KHz) Ve r t i c a l Frequency (Hz) Nominal Pixel Clock (MHz) PC (VGA) DVI to HDMI VGA 640x480@ 60Hz 31.469 59.941 25.175 V V SVGA 800x600@60Hz 37.
36 English 6 Specifica tions Screen Size 106,7 cm / 42.02 ” LCD Panel 1920x1080 Input Function RF In x 1 SCART x 2 A V x 1 Component Video RCA In x 1 Component Audio In x 1 HDMI x 4 VGA x 1 VGA Audi.
37 English 7 Setting the TV on the Wall Dissembling the stand base: 1 Discon nect all the cables and cords from the TV to prevent breakage. 2 Careful ly place the TV face down on a so ft and flat surface (b lanket, foam, cloth, etc) to prevent any damage to the TV .
38 English 8 Using the Cable Or ganizer Route the cables through the cable clamp as shown: f.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Hanns.G ST428MNW è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Hanns.G ST428MNW - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Hanns.G ST428MNW imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Hanns.G ST428MNW ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Hanns.G ST428MNW, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Hanns.G ST428MNW.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Hanns.G ST428MNW. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Hanns.G ST428MNW insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
