Manuale d’uso / di manutenzione del prodotto CE2005 del fabbricante Enviro
Vai alla pagina of 15
PELLET ST OVE EF THERMO 28 PLEASE READ THIS ENTIRE MANUAL BEFORE INSTALLATION AND USE OF THIS PELLET-BURNING ROOM HEATER. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN PROPERTY DAMAGE, BODILY INJURY OR EVEN DEATH. Contact your building or fire officials about restrictions and installation inspection requirements in your area.
2 Introduction........................................................................................3 Important Safet y Data...............................................................3 W ater Specifications.......................................
3 Introduction I MPORTANT S AFETY D ATA : Please read this entire manual bef ore installation and use of this pellet fuel burning room heater . F ailure to follow these instructions could result in propert y damage, bodily injury or even death. CAUTION: DO NOT CONNECT TO ANY AIR DISTRIBUTION DUCT OR SYSTEM.
4 P ELLET Q UALITY : PELLET QUALITY IS IMPORTANT, PLEASE READ THE FOLLOWING PAGE. Y our pellet stove has been designed to burn wood pellets only . Since there are many manufacturers of wood pellets, it is important to select pellets that are fr ee of dirt or any impurities.
5 W ARNINGS AND R ECOMMENDATIONS : A. Do not abuse the glass by striking or slamming the door shut. B. Do not attempt to oper ate the stove with broken glass.
6 Introduction R ATING L ABEL L OCATION : The rating label is located on the hopper lid. A PPLIANCE D IMENSIONS : 37 3 / 8 " (94.9cm) 25 7 / 16 " (64.
T URNING P ELLET S TOVE O N : Ensure the hopper has sufficient pellet fuel to start the unit. 1. Set water temper ature, using the rotary dial located above the feed contr ols.
8 This is used to regulate the airflow through the pellet stove. • On the low heat output settings, push the slider all the way in. • On the high heat output pull the slider out or until a good fire is achieved. A good fire is in between a fire with lazy black tipped flames and a forced fire (very quick, shorter flames).
9 R outine Cleaning and Maintenance The following list of components should be inspected and maintained routinely to ensure that the appliance is operating at its’ optimum and giving y ou excellent .
10 DOOR GLASS Do not attempt to open the door and clean the glass while the unit is in oper ation or if glass is hot. T o clean the glass, use a soft cotton cloth and mild window cleaner , gas or wood sto ve glass cleaner , or tak e a damp paper towel and dip into the fly ash.
11 R outine Cleaning and Maintenance HEAT EXCHANGER AND INTERNAL EXHAUST TUBES: ONLY TO BE CLEANED WHEN THE UNIT IS COLD. Clean away any fly ash that may have collected in and on the tubes.
*NOTE: All troubleshooting procedures should be carried out by qualified technicians or installers. DO NOT: • Hold the ON / OFF BUT TON; this is a momentary contact switch and can be damaged if held down too long. • Service the stove with wet hands.
T roubleshooting 5. The stove will not shut off. « If the unit will not shut off , ensure that the thermostat (if equipped) is turned down below the room temperature (thermostat mode in the ON / OFF position). « If the unit is in the HI/LOW mode the unit will not shut off but will go to an idle setting (LOW).
14 W arr anty Sherwood Industries Ltd. gives a five year limited warrant y on all steel manufactured parts. A one-y ear warr anty is provided on all electrical components.
The following information must be r ecorded by the installer for warrant y purposes and future reference. NAME OF OWNER: _________________________________________ ADDRESS: ____________________________.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Enviro CE2005 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Enviro CE2005 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Enviro CE2005 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Enviro CE2005 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Enviro CE2005, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Enviro CE2005.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Enviro CE2005. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Enviro CE2005 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
