Manuale d’uso / di manutenzione del prodotto 1058 del fabbricante Emerson
Vai alla pagina of 28
1056 PR OFIB US DP ADDENDUM For use with the 1056 units inst alled with Communications option –DP (1056-0X-2X-3X-DP) Instruction Manual Addendum PN 51-1056DP/rev .
ESSENTIAL INSTRUCTIONS READ THIS P AGE BEFORE PROCEEDING! Y our instrument purchase from Rosemount Analytical, Inc. is one of the finest available for your particular application. These instruments have been designed, and tested to meet many national and international standards.
QUICK ST ART GUIDE Profibus 1. Refer to Model 1056 Instruction Manual, PN 51-1056 for installation instructions. 2. Ensure that the M12 interconnect cable is installed. See Section 3.0 for wiring instructions. Make, output, and power connections. 3. Once connections are secured and verified, apply power to the analyzer .
This manual contains instructions for inst allation and operation of the Model 1056 Dual-Input Intelligent Analyzer with Profibus DP digit al communications. The following list provides notes concerning all revisions of this document. Rev . Level Date Notes A 1/08 This is the initial release of the product manual.
i MODEL 1056DP T ABLE OF CONTENTS 1056 Profibus DP Instruction Manual Addendum For use with the 1056 units inst alled with –DP Communications ordering option 1056-0X-2X-3X-DP T ABLE OF CONTENTS QUICK ST ART GUIDE QUICK REFERENCE GUIDE T ABLE OF CONTENTS Section Title Page 1.
THIS P AGE LEFT BLANK INTENTIONALL Y ii.
1.1 GENERAL SPECIFICA TIONS 1.1.1 Profibus Slave (St ation_T ype =0) Pure DP Device (FMS_supp =0) 1.1.2 T en Baud Rates Supported: 1.1.3 Adding slave address via Profibus DP Enabled (Set_Slave_Add_Sup.
MODEL 1056DP SECTION 2.0 INTRODUCTION This page lef t blank intentionally 2.
3 SECTION 2.0 INTRODUCTION T O PROFIBUS ADAPTOR AND PROFIBUS NETWORKS MODEL 1056DP SECTION 2.0 INTRODUCTION 2.1 INTRODUCTION T O MODEL 1056 WITH PROFIBUS 2.
4 2.3 INTRODUCTION TO PROFIBUS - GENERAL Profibus is an open F IELDBUS standard complying with the harmonized European st andard EN 50170. It permits devices from different manufacturers to communicate with one another without the need for specialized interfaces.
5 SECTION 3.0 INST ALLA TION AND WIRING 3.1 PROFIBUS BOARD 3.2 WIRING DIRECTL Y T O A PROFIBUS NETWORK 3.3 WIRING TO A PROFIBUS NETWORK WITH AN M12 CABLE ASSEMBL Y MODEL 1056DP SECTION 3.0 INST ALLA TION AND WIRING This section outlines recommended methods of wiring Model 1056 units which include a Profibus DP digital com- munications board.
6 2 . Secure the purple Profibus cable with a cable gland fittings and nut from the outside of the enclo- sure to ensure a proper seal. Note that the cable gland fittings (PN 23554-00 - Cable Gland Kit, Quantity 5) does not require the securing nut inside the enclosure to properly install the fitting.
7 3. Remove the 4-lead terminal block which is installed on the Profibus slide-in board. This photo shows the 4-lead terminal block installed onto the board. 4. Wire the two leads of the purple Profibus cable (red and green) to the A and B positions of the 4-lead removable terminal block.
8 6 . Ensure that the 10-lead ribbon cable is properly connected from the Profibus board to the 10-pin shrouded connector labeled “DIG I/O” on the main printed circuit board. Once power is wired to the unit (as shown in photo), the Profibus-configured Model 1056 is ready for power up and communica- tion on a Profibus network.
9 MODEL 1056DP SECTION 3.0 INST ALLA TION AND WIRING 2 . Secure the M12 cable assembly with the metal threaded nut from the outside of the enclosure to ensure a proper seal. 3. Remove the 4-lead terminal block which is installed on the Profibus slide-in board.
10 MODEL 1056DP SECTION 3.0 INST ALLA TION AND WIRING Ensure that the 10-lead ribbon cable is properly connected from the Profibus board to the 10-pin shrouded connector labeled “DIG I/O” on the main printed circuit board (see photo).
11 MODEL 1056DP SECTION 4.0 PROGRAMMING PROFIBUS SECTION 4.0 PROGRAMMING PROFIBUS 4.1 CHANGING PROFIBUS ADDRESS A T THE DEVICE Properly wired and configured Profibus Model 1056 units can be accessed by the Profibus master af ter a GSD file is downloaded to the Master .
This page lef t blank intentionally 12 MODEL 1056DP SECTION 4.0 PROGRAMMING PROFIBUS.
5.1 COMMUNICA TIONS ARCHITECTURE- OVERVIEW The PROFIBUS-DP communications profile specifies the operating characteristics of a serial fieldbus intended for the interconnection of distributed digital devices at the field level.
This page lef t blank intentionally 14 MODEL 1056DP SECTION 5.0 DEVICE CONNECTION TO PROFIBUS NETWORK.
15 MODEL 1056DP SECTION 6.0 PROFIBUS ACCESSORIES SECTION 6.0 PROFIBUS ACCESSORIES 6.1 PROFIBUS NETWORK ACCESSORIES 6.2 MODEL 1056 PROFIBUS ACCESSORIES 6.3 SP ARE P ARTS T ABLE Accessories are available to support connection of Profibus devices to a Profibus network and Profibus master unit.
16 MODEL 1056DP SECTION 6.0 PROFIBUS ACCESSORIES 6.3 Sp are part s t able Part Number Description Image 9120705 PROFIBUS M12 T -connector 9120706 PROFIBUS M12 T erminating resistor 9200344 PROFIBUS M12 Bus cable, 2-position, 1 m 9200345 PROFIBUS M12 Bus cable, 2-position, 0.
17 MODEL 1056DP SECTION 7.0 PROFIBUS DIAGNOSTICS, F AUL TS, W ARNINGS SECTION 7.0 PROFIBUS DIAGNOSTICS, F AUL TS, W ARNINGS 7.1 PROFIBUS DIAGNOSTICS 7.
18 7.2 PROFIBUS F AUL T AND W ARNINGS Profibus-related Fault and W arning conditions will be automatically detected and indicated on the Model 1056 display . The main display of the Model 1056 includes a Fault and W arning banner on the lower portion of the display that will intermittently flash if any Fault or W arning condition exists.
19 7.3 TROUBLESHOOTING PROFIBUS F AUL T AND W ARNINGS Model 1056 provides on-screen User Help information and advice to directly assist the user in troubleshooting Fault and/or W arning conditions. Once the individual Fault or W arning condition is displayed, the user can access User Help for each Fault and W arning condition.
20 NOTES:.
A W orldwide Network of Sales and Service Emerson Process Management’s field sales of fices are your source for more information on the fill line of Rosemount Analytical prod- ucts. Field sales personnel will work closely with you to supply technical dat a and application information.
Credit Cards for U.S. Purchases Only . The right people, the right answers, right now . ON-LINE ORDERING NOW A V AILABLE ON OUR WEB SITE http://www .rosemountanalytical.com 8 Emerson Process Management Rosemount Analytical Inc. 2400 Barranca Parkway Irvine, CA 92606 USA T el: (949) 757-8500 Fax: (949) 474-7250 http://www .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Emerson 1058 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Emerson 1058 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Emerson 1058 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Emerson 1058 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Emerson 1058, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Emerson 1058.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Emerson 1058. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Emerson 1058 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
