Manuale d’uso / di manutenzione del prodotto P1WSHR del fabbricante CompuSTAR
Vai alla pagina of 18
1 WWW.COMPUSTAR.COM This device complies w ith Part 15 of the FCC rules. Operation is subject to the following conditions; (1) This device may not cause harmful interference. (2) This device may accept any interference received, including interference tha t ma y cause undesired operation.
T able Of Content s Kit(s) Contents ............................................................................................................................... ........... 3 Warranty Coverage .......................................................
Introduction Introduction Thank you for purchasing a CompuStar Pro system for your vehicle. In order to truly enjoy the benefits of this system, we recommend that you fully review the following manual.
Remote Reference Remote Reference P1WAMR (1 Way AM) Applicable to the following models; - P1WAM-AS (alarm and remote start) - P1WAM-A (alarm w/out remote start) - P1WAM-S (remote start w/out alarm) P1.
Quick Reference Quick Reference Valet Mode Valet Mode When servicing or loaning your vehicle to others, the CompuStar Pro system should be in Valet mode. Valet mode prevents the system from remote starting and disables all alarm functions. IMPORTANT: While in Valet mode the CompuStar will st i ll lock and unlock power lock systems.
1 Way Remote Button Functions Button Duration Additional Programming Required Function / Description 0.5 seconds no Lock/Arm 3.5 seconds no Panic/vehicle loca ter (flashes vehicles parking lights and sounds siren and horn). 0.5 seconds no Unlock/Disarm 0.
General System Functions General System Functions The remote transmitter functions have been predetermined and programmed from the factory. The four button configuration allows for many functions to be performed through a series of tapping, holding and / or multiple presses of buttons.
IMPORTANT: Your vehicle’s key must be inserted into the ignition and turned to the “on” position prior to driving your vehicle. If the foot brake is depressed prior to t he key being in the “on” position, the vehicle will shut off.
Trunk Release Hold button for 2.5 seconds to release the trunk or hatch. If you are in range, the vehicle’s parking lights will flash once and/or siren chirp once indicating th at the trunk release command has been successfully transmitted. IMPORTANT: Trunk release is an optional vehicle feature that may require additional parts and labor.
Advanced System Functions Advanced System Functions The following section reviews advanced system functions. Many of these functions require multiple steps or additional programming by your local authorized CompuStar dealer to be active. The following section reviews advanced system functions.
STEP 1: Turn on Option 3-10-III. (Dealer programmed option) TEP 2: Turn ignition key to the “on” position. TEP 3: Hold down the valet switch for 1.
Remote Coding / Programming Routine(s) Remote Coding / Programming Routine(s) IMPORTANT: Every CompuStar Pro remote must be coded to the system prior to performing any operations. All remotes must be coded at the same time. IMPORTANT: Every CompuStar Pro remote must be coded to the system prior to performing any operations.
Remote S tart Error Dia gnostic gnostic If the remote start fails to start the vehicle, the parking lights will flash thr ee times immediately. Following those three flashes the parking lights will flash again correspo nding to the error table. If the remote start fails to start the vehicle, the parking lights will flash thr ee times immediately.
Limited Lifetime W arranty Firstech, LLC Warrants to the original purchaser that this product shall b e free of defects in material and workmanship under normal use and circumstances for the period of.
Notes: ___________________________________________________________________________________ ___________________________________________________________________________________ _________________________.
___________________________________________________________________________________ ___________________________________________________________________________________ ________________________________.
17.
www.compustar.com Toll Free: 888-820-3690 21911 68 th Ave S Kent, WA 98032 18.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il CompuSTAR P1WSHR è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del CompuSTAR P1WSHR - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso CompuSTAR P1WSHR imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul CompuSTAR P1WSHR ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il CompuSTAR P1WSHR, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del CompuSTAR P1WSHR.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il CompuSTAR P1WSHR. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo CompuSTAR P1WSHR insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
