IT
Ferm logo
Manuale d'uso ufficiale

Ferm Cordless Angle Grinder (AGM1088)

108 pagine·2.1 MB·Smerigliatrice·PDF·ENJA
Ferm Cordless Angle Grinder (AGM1088)
Indice dei contenuti 14 sezioni ANGLE GRINDER AGM1088 · SAFETY WARNINGS · DESCRIPTION (FIG. A) · ASSEMBLY · … MostraNascondi
Page 1 of the Ferm Cordless Angle Grinder (AGM1088) user manual — SAFETY WARNINGS
Pagina 1 · clicca per ingrandire
Pagina 1

ANGLE GRINDER AGM1088

Do not press the spindle lock button while the motor is running.

Thank you for buying this Ferm product. By doing so you now have an excellent product, delivered by one of Europe’s leading suppliers. All products delivered to you by Ferm are manufactured according to the highest standards of performance and safety. As part of our philosophy we also provide an excellent customer service, backed by our comprehensive warranty. We hope you will enjoy using this product for many years to come.

Risk of fire.

Double insulated.

Do not dispose of the product in unsuitable containers.

The product is in accordance with the applicable safety standards in the European directives.

SAFETY WARNINGS

  • Additional safety warnings for angle grinders
  • The machine has been designed for use as a grinder or cut-off machine. The machine is not suitable for operations such as sanding, wire brushing, polishing, etc. Risk of personal injury.
  • Do not use accessories which are not specifically designed and recommended by the manufacturer. Risk of personal injury.
  • Inspect the machine and the accessories before each use. Do not use accessories which are bent, cracked, or otherwise damaged. If the machine or one of the accessories is dropped, inspect the machine or the accessory for damage. If necessary, replace the accessory.
  • Let the machine run at no load in a safe area after mounting the accessories. If the machine vibrates strongly, immediately switch off the machine, remove the mains plug from the mains, and try to solve the problem.
  • Make sure that the maximum speed for the grinding disc is larger than or the same as the maximum speed of the machine. Refer to the rating plate on the machine.
  • Only use grinding discs with the correct thickness and outside diameter. Refer to the rating plate on the machine.
  • Make sure that spindle diameter of grinding discs, spacers, tension nuts, etc. correspond to the diameter of the spindle on the machine.
  • Make sure that the grinding disc is properly mounted. Do not use adapters or other aids to mount grinding discs with another spindle diameter.

The following symbols are used in the user manual or on the product:

Read the user manual.

Risk of personal injury.

Risk of electric shock.

Immediately remove the mains plug from the mains if the mains cable becomes damaged and during cleaning and maintenance.

Ferm Cordless Angle Grinder (AGM1088) — SAFETY WARNINGS diagram (page 1)
Fig. 1

Risk of flying objects. Keep bystanders away from the work area.

Page 2 of the Ferm Cordless Angle Grinder (AGM1088) user manual — ANGLE GRINDER AGM1088
Pagina 2 · clicca per ingrandire
Pagina 2
  • Only use grinding discs that are recommended by the manufacturer. Only use guards that are specifically designed for the grinding disc.
  • Only use grinding discs that are suitable for the application. For example: do not grind with the side of a cut-off disc.
  • Do not use the machine without the guard. Securely mount the guard for maximum safety. Make sure that the user is protected from the grinding disc as much as possible.
  • Make sure that the workpiece is properly supported or fixed.
  • Wear safety goggles. Wear hearing protection. Wear a dust mask. If necessary, use other protective means, such as safety gloves, safety shoes, etc. Risk of personal injury.
  • Keep bystanders away from the work area. Make sure that all persons in the work area wear protective equipment. Risk of personal injury.
  • Keep the mains cable away from the rotating grinding disc. If the mains cable touches the rotating grinding disc, your hands or arms may come in contact with the grinding disc. Risk of personal injury.
  • Hold the machine by the insulated gripping surfaces where the grinding disc may contact hidden wiring or the mains cable. If the grinding disc contacts a ’live’ wire, the exposed metal parts of the machine can also become ’live’. Risk of electric shock.
  • Do not use the machine while carrying it at your side. Risk of personal injury.
  • Do not use the machine on workpieces requiring a maximum grinding depth that exceeds the maximum grinding depth of the grinding disc.
  • Do not use accessories that require liquid coolants. Risk of electric shock.
  • Do not use the machine near flammable materials. Risk of fire.
  • Do not work materials containing asbestos. Asbestos is considered carcinogenic.
  • Do not work metal with a magnesium content of more than 80%.
  • Beware that the grinding disc continues to rotate for a short period after switching off the machine. Do not attempt to bring the grinding disc to a standstill yourself.
  • Never put the machine down on a table or a workbench before it has been switched off.
  • Regularly clean the ventilation slots. Risk of electric shock.

Kickback is a sudden reaction to a pinched, bound or twisted grinding disc, which causes the machine to lift up and out of the workpiece towards the user. If the grinding disc is pinched or bound tightly by the cut, the grinding disc jams and the machine is rapidly driven back towards the user. If the grinding disc is twisted in the cut, the back edge of the grinding disc can dig into the top surface of the workpiece, which causes the grinding disc to climb out of the cut and jump back towards the user.

  • Kickback is the result of incorrect use of the machine and/or incorrect operating procedures or conditions. Kickback can be avoided by taking proper precautions:
  • Firmly hold the machine with both hands. Position your arms to resist kickback forces. Position your body to either side of the grinding disc, but not in line with the grinding disc. Kickback can cause the grinding disc to jump backwards. If proper precautions are taken, kickback forces can be controlled by the user.
  • Be extra careful when using the machine on corners, sharp edges, etc. Make sure that the grinding disc does not become jammed. Risk of kickback.
  • If the grinding disc jams or if you interrupt a cut for any reason, release the on/off switch and hold the machine motionless in the material until the grinding disc comes to a complete standstill. Never attempt to remove the machine from the workpiece or pull the machine backward while the grinding disc is in motion. Risk of kickback.
  • Do not use blunt or damaged grinding discs. Unsharpened or incorrectly mounted grinding discs produce narrow cuts, which causes excessive friction and kickback and increases the risk of the grinding discs becoming jammed.
  • Do not use toothed saw blades. Do not use woodcarving blades for saw chains. Risk of personal injury.
Page 3 of the Ferm Cordless Angle Grinder (AGM1088) user manual — ASSEMBLY
Pagina 3 · clicca per ingrandire
Pagina 3

DESCRIPTION (FIG. A)

Always check that the voltage of the power supply corresponds to the voltage on the rating plate.

Your angle grinder has been designed for grinding and cutting masonry and steel. 1. On/off switch 2. Spindle lock button 3. Spindle 4. Guard 5. Main grip 6. Auxiliary grip

  • Do not use the machine if the mains cable or the mains plug is damaged.
  • Only use extension cables that are suitable for the power rating of the machine with a minimum thickness of 1.5 mm 2 . If you use a extension cable reel, always fully unroll the cable.

ASSEMBLY

Technical data AGM1088 Mains voltage 230-240 V~ Mains frequency 50 Hz Power input 2500 W No-load speed 6500/min Grinding disc Diameter 230 mm Bore 22.2 mm Spindle thread M14 Weight 5.78 kg Noise and vibration Sound pressure (Lpa) (K=3dB) 93 dB(A) Acoustic power (Lwa) (K=3dB) 104 dB(A) Vibration (K=1.5 m/s2) 6.46 m/s2

Before assembly, always switch off the machine and remove the mains plug from the mains.

Mounting and removing the guard & grinding disc (fig. B)

Do not use the machine without the guard.

  • Mounting
  • Place the machine on a table with the spindle (3) facing upwards.
  • Keep the spindle lock button (2) pressed and remove the flange (7) using the flange key (8).
  • If necessary, remove the grinding disc (9).
  • Remove the flange (10).
  • Mount the guard (4). Secure the guard (4) by tightening the screw (11) and the nut (12).
  • Mount the flange (10).
  • If necessary, mount the grinding disc (9).
  • Keep the spindle lock button (2) pressed and mount the flange (7) using the flange key (8).

Vibration level The vibration emission level stated in this instruction manual has been measured in accordance with a standardised test given in EN 60745; it may be used to compare one tool with another and as a preliminary assessment of exposure to vibration when using the tool for the applications mentioned - using the tool for different applications, or with different or poorly maintainted accessories, may significantly increase the exposure level - the times when the tool is switched off or when it is running but not actually doing the job, may signifi cantly reduce the exposure level

  • Removing
  • Place the machine on a table with the spindle (3) facing upwards.
  • Keep the spindle lock button (2) pressed and remove the flange (7) using the flange key (8).
  • If necessary, remove the grinding disc (9).
  • Remove the flange (10).
  • Remove the guard (4) by loosening the screw (11) and the nut (12).
  • Mount the flange (10).
  • If necessary, mount the grinding disc (9).
  • Keep the spindle lock button (2) pressed and mount the flange (7) using the flange key (8).

Protect yourself against the effects of vibration by maintaining the tool and its accessories, keeping your hands warm, and organizing your work patterns

Wear hearing protection.

Electrical safety

Page 4 of the Ferm Cordless Angle Grinder (AGM1088) user manual — WARRANTY
Pagina 4 · clicca per ingrandire
Pagina 4

ENVIRONMENT

Mounting and removing the auxiliary grip (fig. C) Mounting • Tighten the auxiliary grip (6) into one of the mounting holes (13).

The product, the accessories, and the packaging must be sorted for environmentally friendly recycling.

Removing • Loosen the auxiliary grip (6) from the mounting hole (13).

Only for EC countries Do not dispose of power tools into domestic waste. According to the European Guideline 2012/19/EU for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally friendly way.

USE

  • Switching on and off (Fig. A)
  • To switch the machine on, press the lock-off button (1a) to the front and then press the On/ off switch (1b).
  • To switch the machine off, release the On/off switch (1b).

CLEANING AND MAINTENANCE

Before cleaning and maintenance, always switch off the machine and remove the mains plug from the mains.

  • Regularly clean the housing with a soft cloth.
  • Keep the ventilation slots free from dust and dirt. If necessary, use a soft, moist cloth to remove dust and dirt from the ventilation slots.

Only use sharp and undamaged grinding discs.

Carbon brushes If the carbon brushes are worn, the carbon brushes must be replaced by the customer service department of the manufacturer or a similarly qualified person.

WARRANTY

Consult the enclosed warranty terms.

Disposal

Page 5 of the Ferm Cordless Angle Grinder (AGM1088) user manual — ENVIRONMENT
Pagina 5 · clicca per ingrandire
Pagina 5
Ferm Cordless Angle Grinder (AGM1088) — ENVIRONMENT diagram (page 5)
Fig. 2

503323 Carbon brush cap ( 2 pcs ) 41

503324 Carbon brush set ( 2 pcs ) 43

503325 Carbon brush holder set complete ( 2 pcs ) 42, 44, 45

Spare parts list

Page 6 of the Ferm Cordless Angle Grinder (AGM1088) user manual — ENVIRONMENT
Pagina 6 · clicca per ingrandire
Pagina 6

Exploded view

Page 7 of the Ferm Cordless Angle Grinder (AGM1088) user manual — EN 60745-1, EN 60745-2-3, EN 55014-1, EN 55014-2,
Pagina 7 · clicca per ingrandire
Pagina 7

DECLARATION OF CONFORMITY

AGM1088 - ANGLE GRINDER

(EN) We declare under our sole responsibility that this product is in conformity with

(SK) Vyhlasujeme na našu výhradnú zodpovednosť, že tento výrobok je v zhode a súlade

directive 2011/65/EU of the European parliament and of the council of 8 June on the restriction of the use of certain hazardous substances in electrical and electronic equipment is in conformity and accordance with the following standards and regulations: (DE) Der Hersteller erklärt eigenverantwortlich, dass dieses Produkt der Direktive

s nasledujúcimi normami a predpismi: Je v súlade s normou 2011/65/EÚ Európske- ho parlamentu a Rady z 8. júna 2011 týkajúcej sa obmedzenia používania určitých nebezpečných látok v elektrickom a elektronickom vybavení. (SL) S polno odgovornostjo izjavljamo, da je ta izdelek v skladu in da odgovarja nasledn-

jim standardom terpredpisom: je v skladu z direktivo 2011/65/EU Evropskega parla- menta in Sveta z dne 8. junij 2011 o omejevanju uporabe določenih nevarnih snovi v električni in elektronski opremi. (PL) Deklarujemy na własną odpowiedzialność, że ten produkt spełnia wymogi zawarte w

2011/65/EU des Europäischen Parlaments und des Rats vom 8. Juni 2011 über die Einschränkung der Anwendung von bestimmten gefährlichen Stoffen in elektrischen und elektronischen Geräten entspricht. den folgenden Standards und Vorschriften entspricht: (NL) Wij verklaren onder onze volledige verantwoordelijk heid dat dit product voldoet aan

następujących normach i przepisach: jest zgodny z Dyrektywą 2011/65/UE Parla- mentu Europejskiego i Rady z dnia 8 czerwca 2011 r. w sprawie ograniczenia stoso- wania niektórych niebezpiecznych substancji w sprzęcie elektrycznym i elektronic- znym. (LT) Prisiimdami visą atsakomybę deklaruojame, kad šis gaminys atitinka žemiau

de conform Richtlijn 2011/65/EU van het Europees Parlement en de Raad van 8 juni 2011 betreffende beperking van het gebruik van bepaalde gevaarlijke stoffen in elektrische en elektronische apparatuur en in overeenstem ming is met de volgende standaarden en reguleringen: (FR) Nous déclarons sous notre seule responsabilité que ce produit est conforme aux

paminėtus standartus arba nuostatus: atitinka 2011 m. birželio 8 d. Europos Parlamento ir Tarybos direktyvą 2011/65/EB dėl tam tikrų pavojingų medžiagų naudojimo elektros ir elektroninėje įrangoje apribojimo. (LV) Ir atbilstoša Eiropas Parlamenta un Padomes 2011. gada 8. jūnija Direktīvai

standards et directives suivants: est conforme à la Directive 2011/65/EU du Parlement Européen et du Conseil du 8 juin 2011 concernant la limitation d’usage de certaines substances dangereuses dans l’équipement électrique et électronique. (ES) Declaramos bajo nuestra exclusiva responsabilidad que este producto cumple con

2011/65/ES par dažu bīstamu vielu izmantošanas ierobežošanu elektriskās un elektroniskās iekārtās. (ET) Apgalvojam ar visu atbildību, ka šis produkts ir saskaņā un atbilst sekojošiem stand-

las siguientes normas y estándares de funcionamiento: se encuentra conforme con la Directiva 2011/65/UE del Parlamento Europeo y del Consejo de 8 de junio de 2011 sobre la restricción del uso de determinadas sustancias peligrosas en los equipos eléctricos y electrónicos. (PT) Declaramos por nossa total responsabilida-de que este produto está em

artiem un nolikumiem: ir atbilstoša Eiropas Parlamenta un Padomes 2011. gada 8. jūnija Direktīvai 2011/65/ES par dažu bīstamu vielu izmantošanas ierobežošanu elektriskās un elektroniskās iekārtās. (RO) Declarăm prin aceasta cu răspunderea deplină că produsul acesta este în

conformidade e cumpre as normas e regulamentações que se seguem: está em conformidade com a Directiva 2011/65/EU do Parlamento Europeu e com o Conselho de 8 de Junho de 2011 no que respeita à restrição de utilização de determinadas substâncias perigosas existentes em equipamento eléctrico e electrónico. (IT) Dichiariamo, sotto la nostra responsabilità, che questo prodotto è conforme alle

conformitate cu următoarele standarde sau directive: este în conformitate cu Directiva 2011/65/UE a Parlamentului European şi a Consiliului din 8 iunie 2011 cu privire la interzicerea utilizării anumitor substanţe periculoase la echipamentele electrice şi electronice. (HR) Izjavljujemo pod vlastitom odgovornoĻśu da je strojem ukladan sa slijedeśim

standardima ili standardiziranim dokumentima i u skladu sa odredbama: usklađeno s Direktivom 2011/65/EU europskog parlamenta i vijeća izdanom 8. lipnja 2011. o ograničenju korištenja određenih opasnih tvari u električnoj i elektroničkoj opremi. (SRL) Pod punom odgovornošću izjavljujemo da je usaglašen sa sledećim standardima ili

normative e ai regolamenti seguenti: è conforme alla Direttiva 2011/65/UE del Parlamento Europeo e del Consiglio dell’8 giugno 2011 sulla limitazione dell’uso di determinate sostanze pericolose nelle apparecchiature elettriche ed elettroniche. (SV) Vi garanterar på eget ansvar att denna produkt upp fyller och följer följande

normama: usaglašen sa direktivom 2011/65/EU Evropskog parlamenta i Saveta od 8.juna.2011. godine za restrikciju upotrebe određenih opasnih materija u električnoj i elektronskoj opremi. (RU) Под свою ответственность заявляем, что данное изделие соответствует

standarder och bestämmelser: uppfyller direktiv 2011/65/EU från Europeiska parlamentet och EG-rådet från den 8 juni 2011 om begränsningen av användning av farliga substanser i elektrisk och elektronisk utrustning. (FI) Vakuutamme yksinomaan omalla vastuullamme, että tämä tuote täyttää seuraavat

следующим стандартам и нормам: соответствует требованиям Директивы 2011/65/EU Европейского парламента и совета от 8 июня 2011 г. по ограничению использования определенных опасных веществ в электрическом и электронном оборудовании (UK) На свою власну відповідальність заявляємо, що дане обладнання відповідає

standardit ja säädökset: täyttää Euroopan parlamentin ja neuvoston 8. kesäkuuta 2011 päivätyn direktiivin 2011/65/EU vaatimukset koskien vaarallisten aineiden käytön rajoitusta sähkö- ja elektronisissa laitteissa. (NO) Vi erklærer under vårt eget ansvar at dette produktet er i samsvar med følgende

standarder og regler: er i samsvar med EU-direktivet 2011/65/EU fra Europa- parlamentet og Europa-rådet, pr. 8 juni 2011, om begrensning i bruken av visse farlige stoffer i elektrisk og elektronisk utstyr. (DA) Vi erklærer under eget ansvar, at dette produkt er i overensstemmelse med følgende

наступним стандартам і нормативам: задовольняє вимоги Директиви 2011/65/ ЄС Європейського Парламенту та Ради від 8 червня 2011 року на обмеження використання деяких небезпечних речовин в електричному та електронному обладнанні. (EL) Δηλώνουμε υπεύθυνα ότι το προϊόν αυτό συμφωνεί και τηρεί τους παρακάτω

standarder og bestemmelser: er i overensstemmelse med direktiv 2011/65/EU fra Europa-Parlamentet og Rådet af 8. juni 2011 om begrænsning af anvendelsen af visse farlige stoffer i elektrisk og elektronisk udstyr. (HU) Felelősségünk teljes tudatában kijelentjük, hogy ez a termék teljes mértékben

κανονισμούς και πρότυπα: συμμορφώνεται με την Οδηγία 2011/65/ΕΕ του Ευρωπαϊκού Κοινοβουλίου και του Συμβουλίου της 8ης Ιουνίου 2011 για τον περιορισμό της χρήσης ορισμένων επικίνδυνων ουσιών σε ηλεκτρικό και ηλεκτρονικό εξοπλισμό. (AR) :نعلن على مسئوليتنا وحدنا أن هذا المنتج يتوافق مع المعايير والتوجيهات التالية (TR) Tek sorumlusu biz olarak bu ürünün aşağıdaki standart ve yönergelere uygun olduğunu

megfelel az alábbi szabványoknak és előírásoknak: je v souladu se směrnicí 2011/65/EU Evropského parlamentu a Rady EU ze dne 8. června 2011, která se týká omezení použití určitých nebezpečných látek v elektrických a elektronických zařízeních. (CS) Na naši vlastní zodpovědnost prohlašujeme, že je tento výrobek v souladu s

beyan ederiz. (МК) Изјавуваме со наша целосна одговорност дека производот е во согласност со

Смерницата 2011/65/EU на Европскиот парламент и е во согласност според Советот од 9 јуни за ограничување на користење на одредени опасни супстанции во електричната и електронската опрема според следните стандарди и регулативи:

následujícími standardy a normami: Je v súlade s normou 2011/65/EÚ Európskeho parlamentu a Rady z 8. júna 2011 týkajúcej sa obmedzenia používania určitých nebezpečných látok v elektrickom a elektronickom vybavení.

EN 60745-1, EN 60745-2-3, EN 55014-1, EN 55014-2,

EN 61000-3-2, EN 61000-3-3,

2006/42/EC, 2011/65/EU, 2012/19/EU, 2014/30/EU

Zwolle, 01-02-2021 H.G.F Rosberg CEO FERM

FERM - Lingenstraat 6 - 8028 PM - Zwolle - The Netherlands

Page 8 of the Ferm Cordless Angle Grinder (AGM1088) user manual — WWW.FERM.COM ©2021 FERM
Pagina 8 · clicca per ingrandire
Pagina 8

WWW.FERM.COM ©2021 FERM

2102-25

Fai una domanda su Ferm Cordless Angle Grinder (AGM1088)

I possessori del prodotto e il nostro team di solito rispondono entro 24 ore, e la tua domanda sarà utile anche ad altri.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
Nessuna domanda ancora per il dispositivo Ferm Cordless Angle Grinder (AGM1088)

Invia la prima domanda: risponderanno altri possessori o il nostro team.

Documento originale

Ferm Cordless Angle Grinder (AGM1088) manuale in PDF

108 pagine·2.1 MB·Smerigliatrice·PDF
Clicca su qualsiasi pagina in alto per aprirla qui
Pagina 1 / …
100%
Caricamento pagine…