Manuale d’uso / di manutenzione del prodotto 2.1 del fabbricante Brocade Communications Systems
Vai alla pagina of 44
53-1 002606-06 18 Ja nu ar y 2 0 13 ® Netw ork OS Documentation Updat es Suppor ting Network OS v2.1.x.
Copyright © 20 12 Brocade Communications Systems, Inc. All Rights Reser ved. Brocade, Brocade Assurance, the B-wi ng symbol, BigIron, DCX, Fabric OS, FastIron, MLX, NetIron, SAN Health, Ser verIron, .
Network OS Documentation Update iii 53-1002606-06 Contents About This Document How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Suppor t ed hardware and sof tware . . . . . . . . . . . . . . . . . . . . . . . .
iv Network OS Documentation Update 53-1002606-06 Modified messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Chapter 4 Brocade VDX 6710-54 Hardware Reference Manual Chapter 4, Brocade VDX 67 1 0-54 Operation . . .
Network OS Documentation Update v 53-1002606-06 About This Document In this chapter • How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v • Suppor t ed hardware and software. . . . . . . . . . . .
vi Network OS Documentation Update 53-1002606-06 What’s new in this document This document has been updat ed for Netw ork OS v2. 1.2 with inf ormation on: • restrict-flooding command • vCenter disco ver y commands • Added the ne w and modified messages in Chapter 3, “Network OS Message Reference” .
Network OS Documentation Update vii 53-1002606-06 Notes, cautions, and warnings The f ollowing notices and statements are used in this manual. They are list ed below in order of increasing sev erity of potential hazar ds.
viii Network OS Documentation Update 53-1002606-06 Notice to the reader This document may contain ref erences to the tr ademarks of the f ollowing corporations. These trademarks are the properties of their respective companies and corporations. These ref erences are made f or informational purposes only .
Network OS Documentation Update ix 53-1002606-06 Getting technical help Contact your switch suppor t supplier f or hardwa re, firmw are, and sof tware support, including product repairs and part ordering. T o expedit e yo ur call, have the f ollowing in f ormation available: 1.
x Network OS Documentation Update 53-1002606-06.
Network OS Documentation Update 1 53-1002606-06 Chapter 1 NOS Administrator’s Guide In this chapter • New Cont ent for the NOS Administrator’s Guide .
2 Network OS Documentation Update 53-1002606-06 Chapter 8, Security 1 switch# firmware download usb directory firmwareNOS_v2.1.1 5. Optional : U nmount the USB storage de vice. switch# usb off Trying to disable USB device. Please wait... USB storage disabled.
Network OS Documentation Update 3 53-1002606-06 Chapter 9, FIPS Support 1 } Or group = <usergroup> { default service = permit service = exec { priv-lvl=15 optional brcd-role = admin } } user = &.
4 Network OS Documentation Update 53-1002606-06 Chapter 23, Configuring LLDP 1 1. Log in to any switch in a Br ocade VCS F abric cluster . 2. In the global configuration mode, enter the int er face command to select the RBridge/ slot/por t for which y ou want to enable edge-loop detection.
Network OS Documentation Update 5 53-1002606-06 Chapter 2 NOS CLI Command Reference In this chapter • New commands in the Ne twork OS Command Ref erence . . . . . . . . . . . . . . . 5 • Modified commands in Ne twork OS Comman d R eference . . . .
6 Network OS Documentation Update 53-1002606-06 chassis fan airflow-direction 2 Examples T o sp ecify the fan air flow-direction: switch# chassis fan airflow-direction port-side-exhaust Previous confi.
Network OS Documentation Update 7 53-1002606-06 restrict-flooding 2 restrict-flooding Restric ts the system-wide egress flooding be havior on por t-pr ofile por ts. Synopsis restrict-flooding no restrict-flooding Operands None Defaults By default, this f eature is disabled.
8 Network OS Documentation Update 53-1002606-06 vcenter discovery ignore-delete-all-response 2 vcenter discovery ignore -delete-all-response Configures a mode to ignore the “ delet e-all” responses from vCenter .
Network OS Documentation Update 9 53-1002606-06 vcenter discovery timeout 2 vcenter discovery timeout Configures the timeout fo r the response from vCent er ser v er . Synopsis vcenter vce nter- nam e discovery timeout number Operands vce nte r - na me The name of the vCent er .
10 Network OS Documentation Update 53-1002606-06 Modified commands in Netw ork OS Command Reference 2 Modified commands in Network OS Command Reference Modify the f ollowing commands in the Net work OS Command R eference Supporting Netw ork OS v 2 .1 .
Network OS Documentation Update 11 53-1002606-06 ldap-server host 2 ldap-server host Configures an LD AP-s erver host. Synopsis ldap-ser ver host { ipaddr | FQDN } [ por t portnum ] [ basedn basedn ] [ timeout secs ] [ retries num ] no ldap-server host { ip addr | FQDN } Operands host ipaddr Specifies the destinat ion IP address.
12 Network OS Documentation Update 53-1002606-06 lldp dcbx-version 2 lldp dcbx-version Specifies which version of the Data Center Bridging Exchange (DCBX) protocol t o use.
Network OS Documentation Update 13 53-1002606-06 qos flowcontrol 2 qos flowcontrol Activ ates and configures QoS flo w control. Synopsi s qos flo wcontr ol tx [ on | of f ] rx [ on | of f ] no qos flowcontr ol Operands tx [ on | of f ] Activates or deactivat es the transmission por tion of flow control.
14 Network OS Documentation Update 53-1002606-06 radius-server 2 radius-server Applies attribut es to the RADIUS server . Synopsis radius-ser ver host ip-address | hostname auth-por t por tnum pr otoc.
Network OS Documentation Update 15 53-1002606-06 radius-server 2 Description Use this command t o configure attr ibutes on the RADIUS server . If the RADIUS server doesn’t exist, it is added. If the RADIUS server already e xists, then the attributes are changed.
16 Network OS Documentation Update 53-1002606-06 show dpod 2 show dpod Displays Dynamic P or ts on Dema nd (POD) licens e information. Synopsis show dpod [ rbridge-id | all ] Operands rbridge-id Execut es the command on the remot e switch specified by the RBridge I D.
Network OS Documentation Update 17 53-1002606-06 show lldp neighbors 2 show lldp neighbors Displays LLDP inf ormation for all neighb oring de vices on the specified interface.
18 Network OS Documentation Update 53-1002606-06 show lldp neighbors 2 System Description: Fibre Channel Switch. System Capabilities: Switching Routing System Capabilities Enabled: Switching Link Prim.
Network OS Documentation Update 19 53-1002606-06 tacacs-server 2 tacacs-server Applies attributes to the T ACA CS+ ser ver . Synopsis tacacs-ser ver host hostname | ip-address [ por t portnum ] [ pr o.
20 Network OS Documentation Update 53-1002606-06 tacacs-server 2 Usage Guidelines Using the no f orm of the tacacs-ser v er command sets the def ault values of the individual attributes. Examples The f ollowing example adds a T ACA CS+ server: switch(config)# tacacs-server host 10.
Network OS Documentation Update 21 53-1002606-06 usb dir 2 usb dir Lists the contents of an attached USB de vice. Synopsis usb dir [ rbridge-id rbridge-id ] Operands rbridge-id rbridge-id Execut es the command on a switch specified b y its Rbridge ID.
22 Network OS Documentation Update 53-1002606-06 Deleted commands in Network OS Command Reference 2 Deleted commands in Network OS Command Reference Delet e the following commands in the Ne twork OS Command Reference Supporting Network O S v 2 .
Network OS Documentation Update 23 53-1002606-06 Chapter 3 Network OS Message Reference In this chapter Updat e and replace the chapters as described in the follo wing sections: • New messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24 Network OS Documentation Update 53-1002606-06 FW-1409 3 Probable Cause Indicates that the platform is not su ppor t ed for changing the configuration. Recommended Action No action is required. Severity INFO FW System Messages Add the f ollowing message t o the chapter FW System Messages on page 72.
Network OS Documentation Update 25 53-1002606-06 PORT-1016 3 Severity INFO PORT-1016 Message <timestamp>, [PORT-1016], <sequence-number>,, INFO, <system-name>, Interface fibrechannel <rbridge-id number>/<slot number>/<port number> is administratively up.
26 Network OS Documentation Update 53-1002606-06 VC-1009 3 Probable Cause Indicates the cycle f or which no data received from vCent er has been igno red.
Network OS Documentation Update 27 53-1002606-06 Modified messages 3 Probable Cause Indicates that the vCenter disco ver y timeout duration has been changed. Recommended Action No action is required. Severity INFO Modified messages Replace the following message in the chapt er FCOE Syst em Messages on page 60.
28 Network OS Documentation Update 53-1002606-06 FCOE-1034 3.
Network OS Documentation Update 29 53-1002606-06 Chapter 4 Brocade VDX 6710-54 Hardware Reference Manual In this chapter Th e up dates in t his cha pter are for t he B rocad e VD X 67 10-54 Har dware R eference Manual, part number: 53-1 0002390-04, published Mar ch 20 12.
30 Network OS Documentation Update 53-1002606-06 Chapter 5, FRU Removal an d Replacement Procedures 4 Switch#.
Network OS Documentation Update 31 53-1002606-06 Chapter 5 Brocade VDX 6720 Hardware Reference Manual In this chapter The updates in this chapter are f or the VDX Hardware R eference Manual, par t number: 53-1 0002084-04, published Mar ch 20 12. • Chapter 4, Brocade VDX 6720 Operation .
32 Network OS Documentation Update 53-1002606-06 Chapter 5, FRU Removal an d Replacement Procedures 5 Switch# ATTENTION Be sure that all combined FRUs in the chassis have the same air flow direction.
Network OS Documentation Update 33 53-1002606-06 Chapter 6 Brocade VDX 6730 Hardware Reference Manual In this chapter The updates in this chapter are f or the Brocade VDX 6730 Hardw are Ref erence Manual, par t number: 53-1 0002389-04, published Mar ch 20 12.
34 Network OS Documentation Update 53-1002606-06 Chapter 5, FRU Removal an d Replacement Procedures 6 ATTENTION Be sure that all combined FRUs in the chassis have the same air flow direction.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Brocade Communications Systems 2.1 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Brocade Communications Systems 2.1 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Brocade Communications Systems 2.1 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Brocade Communications Systems 2.1 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Brocade Communications Systems 2.1, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Brocade Communications Systems 2.1.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Brocade Communications Systems 2.1. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Brocade Communications Systems 2.1 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
