Manuale d’uso / di manutenzione del prodotto SBC-596 del fabbricante Adaptec
Vai alla pagina of 120
SBC-596/599 Pentium MMX, K6 Full-size CPU Card with LCD, Ethernet, SCSI & High Drive.
Copyright Notice This document is copyrighted, 1998. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice.
Dear Customer: We are notifying you that SBC-596/599 has some compatibility issues with some Seagate hard disk drives. Owing to some limitations with the Seagate controller’s specifica- tions, we found the Intel 430TX chipset cannot work with some Seagate hard disk drives.
l e d o Ml e d o M l e d o M l e d o Ml e d o M9 9 5 - C B S9 9 5 - C B S 9 9 5 - C B S 9 9 5 - C B S9 9 5 - C B S6 9 5 - C B S6 9 5 - C B S 6 9 5 - C B S 6 9 5 - C B S6 9 5 - C B S U P C l e t n Il e.
Packing list Before you begin installing your card, please make sure that the following materials have been shipped: • 1 SBC-596/599 CPU Card • 1 Supporting CD-ROM • 1 IDE cables • 1 FDD cable.
Contents Chapter 1 General Information ................................... 1 Introduction ........................................................................... 2 Features ..........................................................................
Reset connector (CN3) ........................................................... 2 0 Keyboard lock connector (CN4) ............................................. 2 0 Fan power connector (CN5) .............................................. 2 1 SCSI connectors (CN6, CN7) .
Chapter 4 Award BIOS Setup ..................................... 39 System test and initialization ............................................ 4 0 System configuration verification ........................................... 4 0 A W ARD BIOS setup ..
Chapter 6 SCSI Setup and Configuration .................. 63 Installation and setup .............................................................. 64 SCSI configuration guidelines ................................................. 64 SCSI ID numbers ..
Appendix A Programming the W atchdog Timer .......... 91 Programming the watchdog timer ................................... 9 2 Appendix B Pin Assignments ........................................ 9 3 Speaker connector (CN1) ...........................
Chapter 1 General Information 1 1 General Information This chapter gives background information on the SBC-596/599. Sections include: • Introduction • Features • Specifications • Board layout .
2 SBC-596/599 User's Manual Introduction The SBC-596/599 is a full-size CPU card. This card uses a Pentium processor based CPU and accommodates up to 256 MB DRAM. It also provides a secondary level 512 KB cache, 2 USB(Universal Serial Bus) ports and 63-level watchdog timer with jumperless setup.
Chapter 1 General Information 3 Specifications Standard PC system • CPU: Intel Pentium up to 233 MHz, P54C, P55C(MMX) AMD K5, K6 Cyrix 6x86, Cyrix 6x86MX • BIOS: AWARD Flash BIOS, supports plug &a.
4 SBC-596/599 User's Manual - Panel resolution: Supports 640 x 480 @ 16M colors, up to 800 x 600 TFT panel - Display output: DB-15 VGA connector, 44 pin header general purpose flat panel display connector SCSI interface: (SBC-599 only) • PCI SCSI: Supports Ultra Wide SCSI 8-bit or 16-bit interface.
Chapter 1 General Information 5 Board layout and dimensions Dimensions in mm SBC-596/599 dimensions á 42.5 â â á â â á á 63.35 15.0 46.33 á á á â â â 19.18 81.33 48.01 12.07 á â ß ß ß 1.9 5.14 3.81 5.0 5.0 5.0 5.0 à ß ß à 20.0 122.
6 SBC-596/599 User's Manual.
Chapter 2 Installation Guide 7 2 CHAPTER Installation Guide This Installation Guide tells how to set up the SBC-596/599 hardware, including instructions on setting jumpers and connecting peripherals, switches and indicators. Be sure to read all the safety precautions before you begin the installation procedure.
8 SBC-596/599 User's Manual Jumpers The SBC-596/599 has a number of jumpers that allow you to configure your system to suit your applications. The table below lists the function of each of the board’ s jumpers.
Chapter 2 Installation Guide 9 Connectors Onboard connectors link the SBC-596/599 to external devices such as hard disk drives, a keyboard, or floppy drives. The table below lists the function of each of the board’ s connectors. Connectors Label Function CN 1 Speaker CON.
10 SBC-596/599 User's Manual Locating jumpers J1 J2 J5 J4 J3 J9 J8 J7 J15 J13 J10 J1 1 J12 J14.
Chapter 2 Installation Guide 11 Locating connectors CN19 UTP1 CN18 CN20 CN1 1 CN15 CN12 CN13 CN17 CN16 CN14 CN6 CN7 CN8 CN9 CN10 CN1 CN4 CN5 CN3 CN2.
12 SBC-596/599 User's Manual Setting jumpers Y ou configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them.
Chapter 2 Installation Guide 13 CPU installation and upgrading Y ou can upgrade to a higher power Pentium processor at any time. Simply remove the old CPU, install the new one, and set the jumpers for the new CPU type and speed. Always disconnect the power cord from your chassis when you are working on it.
14 SBC-596/599 User's Manual 3 . Press the lever down. The plate will slide forward. Y ou will feel some resistance as the pressure starts to secure the CPU in the socket. This is normal and won‘t damage the CPU. When the CPU is installed, the lever should snap into place at the side of the socket.
Chapter 2 Installation Guide 15 Frequency Ratio (J5) This jumper sets the frequency ratio between the internal frequency of the CPU and the BUS Clock. If you use an AMD K6 CPU, please refer to J5 frequency ratio for K6 only . J5 Frequency Ratio** F .R.
16 SBC-596/599 User's Manual MTXC CLK Setting/P55C Enabled (J7) This jumper setting provides Intel MTXC chipset 66/60 MHz frequency . Y ou can Enable/Disable P55C CPUs with pin 1 and pin 2 close/open.
Chapter 2 Installation Guide 17 Battery Select and Clear CMOS (J9) This jumper sets the CMOS data retention power supply by internal battery , external battery , or clear CMOS.
18 SBC-596/599 User's Manual LCD/EL Select (J13) This jumper sets the display type for the CPU card. J13 LCD/EL Select EL LCD* J13 1 2 3 1 2 3 * default setting Dual Power Select (J15) This jumper sets single power/dual power CPU type.
Chapter 2 Installation Guide 19 Installing DRAM (SIMMs) The SBC-599 CPU card provides four 72-pin SIMM (Single In- line Memory Module) sockets and supports either Fast Page Mode (FPM) or Extended Data Output (EDO) DRAM with a speed of 70 ns or faster .
20 SBC-596/599 User's Manual Front panel connectors (CN1,CN2,CN3,CN4) Y ou may want to install external switches to monitor and control the SBC-596/599.
Chapter 2 Installation Guide 21 Fan power supply connector (CN5) CN5 provides power supply to optional CPU cooling fan. Only present when +12 V power is supplied to the board.
22 SBC-596/599 User's Manual 1 . Connect one end of the cable to CN8/CN9. Make sure that the red (or blue) wire corresponds to pin 1 on the connector . 2 . Plug the other end of the cable to the Enhanced IDE hard drive, with pin 1 on the cable corresponding to pin 1 on the hard drive.
Chapter 2 Installation Guide 23 Connecting the floppy drive 1 . Plug the 34-pin flat-cable connector into CN10. Make sure that the red wire corresponds to pin one on the connector . 2 . Attach the appropriate connector on the other end of the cable to the floppy drive(s).
24 SBC-596/599 User's Manual VGA interface connections (SBC-599 only) The SBC-599 PCI SVGA interface can drive conventional CR T displays and is capable of driving a wide range of flat panel displays, including electroluminescent (EL), gas plasma, passive LCD and active LCD displays.
Chapter 2 Installation Guide 25 LCD power select 5 V *3.3 V J12 * default setting Configuration of the VGA interface is done completely via the software utility .
26 SBC-596/599 User's Manual COM-port connectors (CN13, CN17) The SBC-596/599 has two serial ports, COM1 and COM2, to provide connections for serial devices (a mouse, etc.) or a communication network. Y ou can find the pin assignments for the COM port connectors in Appendix B.
Chapter 2 Installation Guide 27 USB connectors (CN18, CN20) The SBC-596/599 provides two USB (Universal Serial Bus) interfaces which gives complete plug and play , hot attach/detach for up to 127 external devices. The USB interfaces comply with USB specification rev .
28 SBC-596/599 User's Manual Watchdog timer configurationon An on-board watchdog timer reduces the chance of disruptions which EMP (electro-magnetic pulse) interference can cause. This is an invaluable protective device for standalone or unmanned applications.
Chapter 3 Software Configuration 29 3 CHAPTER Software Configuration This chapter details the software configuration information. It shows you how to configure the card to match your application requirements. A W ARD System BIOS is covered in Chapter 4.
30 SBC-596/599 User's Manual Introduction The SBC-596/599 system BIOS and custom drivers are located in a 128 Kbyte, 32-pin (JEDEC spec.) Flash ROM device. A single Flash chip holds the system BIOS, VGA BIOS, and network Boot ROM image. The display can be configured via software.
Chapter 3 Software Configuration 31 A WDFLASH.EXE This program allows you to write the VGA display driver files to the BIOS Flash ROM. The VGA files all come ready formatted for the SBC-599 with .BIN extensions. They are custom written and can be made available upon request.
32 SBC-596/599 User's Manual VGA display software configuration (SBC-599 only) The SBC-599 on-board VGA interface supports a wide range of popular LCD, EL, gas plasma flat panel displays and traditional analog CR T monitors.
Chapter 3 Software Configuration 33 Connections for four standard LCDs (SBC-599 only) Connections to Sharp LM64183P, LM64P89 (640 x 480 DSTN MONO LCD) LM64183/64P89 SBC-599 CN11 Pin Pin name Pin Pin n.
34 SBC-596/599 User's Manual Connections to PLANAR EL (640 x 480 AD4 EL) PLANAR 640 x 480 AD4 SBC-599H CN11 P in Pi n n am e Pin Pin name 1 GND 3 GND 2 D O 21 P12 3 GND 3 GND 4 D 1 22 P13 5 GND 3.
Chapter 3 Software Configuration 35 Connections to Toshiba LTM10C042 (640 x 480 TFT Color LCD) LTM10C042 PCA-6159H CN11 Pin Pin name Pin Pin name 1 GND 3 GND 2 C LK 35 SHFCLK 3 GND 4 GND 4 R 0 27 P18 .
36 SBC-596/599 User's Manual Connections to Sharp LM64C142 (640 x 480 DSTN Color LCD) LM64C142 SBC-599H CN11 Pin Pin name Pin Pin name CN1-1 YD 36 FL M CN1-2 L P 38 L P CN1-3 XCX 35 SHFCLK CN1-4 .
Chapter 3 Software Configuration 37 Ethernet software configuration (SBC-599 only) The SBC-599 on-board Ethernet interface supports all major network operating systems. T o configure the medium type, to view the current configuration, or to run diagnostics, do the following: 1 .
38 SBC-596/599 User's Manual.
Chapter 4 Award BIOS Setup 39 4 CHAPTER Award BIOS Setup This chapter describes how to set BIOS configuration data..
40 SBC-596/599 User's Manual System test and initialization These routines test and initialize board hardware. If the routines encounter an error during the tests, you will either hear a few short beeps or see an error message on the screen. There are two kinds of errors: fatal and non-fatal.
Chapter 4 Award BIOS Setup 41 AWARD BIOS setup A ward’ s BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off.
42 SBC-596/599 User's Manual STANDARD CMOS SETUP When you choose the “ST ANDARD CMOS SETUP” option from the “INITIAL SETUP SCREEN” menu , the screen shown below is displayed. This standard Setup Menu allows users to configure system components such as date, time, hard disk drive, floppy drive and display .
Chapter 4 Award BIOS Setup 43 BIOS FEATURES SETUP The “BIOS FEA TURES SETUP” option consists of configuration entries that allow you to improve your system performance, or let you set up some system features according to your preference.
44 SBC-596/599 User's Manual CHIPSET FEATURES SETUP This “CHIPSET FEA TURES SETUP” option controls the configuration of the board’ s chipset. By choosing the “CHIPSET FEA TURES SETUP” option from the INITIAL SETUP SCREEN menu, the screen below is displayed.
Chapter 4 Award BIOS Setup 45 POWER MANAGEMENT SETUP The “POWER MANAGEMENT SETUP” option allows you to reduce power consumption. This feature turns off the video display and shuts down the hard disk after a period of inactivity .
46 SBC-596/599 User's Manual PnP/PCI CONFIGURATION The “PnP/PCI CONFIGURA TION” option configures the PCI bus slots. By choosing the “PnP/PCI CONFIGURA TION” option from the Initial Setup Screen menu, the screen below is displayed. This sample screen contains the manufacturer ’ s default values for the SBC-596/599.
Chapter 4 Award BIOS Setup 47 INTEGRATED PERIPHERALS By choosing the “INTEGRA TED PERIPHERALS” option from the INITIAL SETUP SCREEN menu, the screen below is displayed. This sample screen contains the manufacturer ’ s default values for the SBC-596/599.
48 SBC-596/599 User's Manual Load BIOS defaults “LOAD BIOS DEF AUL TS” loads the default system values directly from ROM. If the stored record created by the Setup program becomes corrupted (and therefore unusable), these defaults will load automatically when you turn the SBC-596/599 on.
Chapter 4 Award BIOS Setup 49 USER P ASSWORD T o change the password, choose the USER P ASSWORD option form the Setup main menu and press <Enter>. 1 . If the CMOS is bad or this option has never been used, a default password is stored in the ROM.
50 SBC-596/599 User's Manual AUTO DETECT HARD DISK The IDE HDD AUTO DETECTION utility can automatically detect the IDE hard disk installed in your system.
Chapter 5 PCI SVGA Setup (SBC-599 only) 51 5 CHAPTER PCI SVGA Setup (SBC-599 only) The SBC-599 features an on-board PCI flat panel/VGA interface. This chapter provides instructions for installing and operating the software drivers on the included Supporting CD-ROM.
52 SBC-596/599 User's Manual Before you begin T o facilitate the installation of the enhanced display device drivers and utility software, you should read the instructions in this chapter carefully before you attempt installation. The enhanced display drivers for the SBC-599 board are located on the software installation diskette.
Chapter 5 PCI SVGA Setup (SBC-599 only) 53 Installation The drivers include W indows 3.1, W indows 95, W indows NT drivers, and OS/2 drivers. Simultaneous display mode The 65550 VGA BIOS supports monochrome LCD, EL, color TFT and STN LCD flat panel displays.
54 SBC-596/599 User's Manual Sleep mode The display driver contains two files that support sleep mode. Simply type the filename at the DOS prompt: ON.
Chapter 5 PCI SVGA Setup (SBC-599 only) 55 Before you begin The display driver contains drivers for several versions of certain applications. Y ou must install the correct version in order for the driver to work properly so make sure you know which version of the application you have.
56 SBC-596/599 User's Manual Changing Color Schemes After you change display drivers, you may notice that the color scheme used by W indows looks strange. This is because different drivers have different default colors. T o change the color scheme, select the Control Panel from the Main window .
Chapter 5 PCI SVGA Setup (SBC-599 only) 57 Windows 95 Drivers Setup Proce- dure 1 . Boot system with VGA or SuperVGA driver . 2 . Select properties from a menu after right button press. 3 . Select display . 4 . Select Change Display . 5 . Select Change Monitor .
58 SBC-596/599 User's Manual Windows NT Drivers Setup Procedure Step 1 1 . Install W indows NT as you normally would for a VGA display . 2 . First click the Start button, choose Settings and click on Control Panel. 3 . Choose the Display icon and click on the icon.
Chapter 5 PCI SVGA Setup (SBC-599 only) 59 OS/2 Drivers Setup Procedure Preliminary Steps The following steps must be performed before you install the 65550/554 display driver: 1 . OS/2 DOS Support must be installed. 2 . If you previously installed SVGA support, you must reset the system to VGA mode.
60 SBC-596/599 User's Manual A log of the information output during the install can be found in <root>:OS2INST ALLDISPLA Y .LOG 4 . After restarting the system, perform the following steps: 1). Open the OS/2 System folder . 2). Open the System Setup folder .
Chapter 5 PCI SVGA Setup (SBC-599 only) 61 Selecting Monitor Type Monitor type is initially set to DEF AUL T . This DEF AUL T setting may not allow you to select all resolution/refresh combinations that are available for your monitor . The following steps can be done to select monitor type.
62 SBC-596/599 User's Manual Installation Notes 1 . During the installation of this driver , DISPLA Y .LOG and DSPINSTL.LOG files are created in OS2INST ALL directory . These files identify the OS/2 system files that were updated, and indicate whether the installation was successful.
Chapter 6 SCSI Setup and Configurations 63 6 SCSI Setup and Configurations (SBC-599 only) The SBC-599 is equipped with two SCSI interfaces. This chapter provides basic SCSI concepts and instructions for installing the software drivers with the included SCSI driver diskettes.
64 SBC-596/599 User's Manual Installation and Setup The SBC-599 is equipped with an Adaptec AIC-7880 Ultra W ide PCI-to-Ultra SCSI host adapter which provides a powerful multitasking interface between your computer’s PCI bus and SCSI devices (disk drives, CD-ROM drives, scanners, tape backups, removable media drives, etc.
Chapter 6 SCSI Setup and Configurations 65 The AIC-7880 supports the SCSI Configured AutoMatically (SCAM) protocol, which assigns SCSI IDs dynamically and resolves SCSI ID conflicts automatically at bootup. If your system includes SCSI disk drives or other devices that support SCAM, you do not need to manually assign SCSI IDs to these devices.
66 SBC-596/599 User's Manual W e recommend that you leave SCSI set to its default setting of Automatic. The following table lists the termination configura- tions.
Chapter 6 SCSI Setup and Configurations 67 AIC-7880 Ultra Wide SCSI T ermination Low High ON ON.
68 SBC-596/599 User's Manual AIC-7880 Ultra Wide SCSI Termination Low High OFF O N SCSI T ermination Examples Installing SCSI Devices Y ou can connect up to 15 devices (seven standard internal and eight Wide (16-bit) internal SCSI devices, or 15 Wide internal SCSI devices) to the Ultra Wide SCSI.
Chapter 6 SCSI Setup and Configurations 69 2. Install the SCSI device in your computer . Refer to your computer and device documentation for instructions. 3. Plug the connector at one end of the internal SCSI cable into the host adapter’s internal SCSI connector.
70 SBC-596/599 User's Manual - When using 50-pin connector only , choose “Low ON/High ON” (Default) - When using 68-pin connector only , choose “Low ON/High ON” (Default) - When using bot.
Chapter 6 SCSI Setup and Configurations 71 Basic Host Adaptec Settings Def ault Host Adapter SCSI ID 7 SCSI Parity Checking Enabled Host Adapter SCSI T ermination Low ON/High ON Boot Device Settings D.
72 SBC-596/599 User's Manual host adapter the highest priority on the SCSI bus. W e recommend that you leave the host adapter set to SCSI ID7. n SCSI Parity Checking - This option determines whether the host adapter verifies the accuracy of data transfer on the SCSI bus.
Chapter 6 SCSI Setup and Configurations 73 n Initiate Sync Negotiation - This option determines whether the host adapter initiates synchronous data transfer negotiation (Sync Negotiation) between the device and host adapter . The default setting is Y es.
74 SBC-596/599 User's Manual When set to Y es, the host adapter attempts 16-bit transfer . When set to No, 8-bit data transfer is used unless the SCSI device itself requests Wide negotiation. The ef fective transfer rate is doubled when 16-bit data transfer is sued because the data path for W ide SCSI is twice the size of normal 8-bit SCSI.
Chapter 6 SCSI Setup and Configurations 75 Setting this option to yes reduces the load on your computer ’ s power supply by allowing the host adapter to start SCSI devices one-at-a-time when you boot your computer . When set to No, the devices are allowed to start at the same time.
76 SBC-596/599 User's Manual n Support Removable Disks Under BIOS as Fixed Disks — This option controls which removable-media drives are supported by the host adapter BIOS.
Chapter 6 SCSI Setup and Configurations 77 Extended BIOS Translation is used only with MS-DOS 5.0 or above. You do not need to enable this option if you are using another operating system such as NetWare, OS/s, Windows NT, or UNIX. When you partition a disk larger than 1 GByte, use the MS-DOS disk utility as you normally would.
78 SBC-596/599 User's Manual In some cases, selecting an option displays another menu. Y ou can return to the previous menu at any time by pressing Esc. T o restore the original SCSISelect default values, press F6. To toggle the display between color and monochrome modes, press F5 (this feature may not work on some kinds of monitors).
Chapter 6 SCSI Setup and Configurations 79 Installing Device Drivers Some operating systems embed (included) the AIC-7880 Ultra Wide SCSI device driver as part of their installation software.
80 SBC-596/599 User's Manual ADAPTEC EZ-SCSI UTILITY Adaptec EZSCSI gives you what you need to use your SCSI devices most effectively with Windows 95 and Windows NT. You can also use Adaptec EZSCSI on computers running DOS, Windows 3.1x, or Windows for Workgroups 3.
Chapter 6 SCSI Setup and Configurations 81 Troubleshooting Tips SCSI Device Troubleshooting Review this checklist if your newly installed SCSI disk drives, CDROM drives, and other devices do not seem to work properly: Be sure that termination is correctly set for all devices on the SCSI bus, as described in your host adapter documentation.
82 SBC-596/599 User's Manual What if there is no SCSI controller icon under Device Manager , or the model name of the SCSI chipset does not appear under Device Manager: If the SCSI controllers icon or your host adapter’s model name do not appear, open Control Panel and double-click the Add New Hardware icon.
Chapter 6 SCSI Setup and Configurations 83 5 . Turn the computer ON. If the new host adapter supports Plug and Play, Windows will install and configure it automatically.
84 SBC-596/599 User's Manual 3 . When you are finished running Adaptec EZSCSI for DOS, find the file named cdtsd.vxd in the windowssystemiosubsys directory and rename it cdtsd.sav . My CD-ROM drive shows up as more than one icon under My Computer.
Chapter 6 SCSI Setup and Configurations 85 Information for DOS/Windows 3.1x Users The following information may be useful if you install Adaptec EZSCSI on a computer running DOS, Windows 3.
86 SBC-596/599 User's Manual Adaptec EZSCSI includes several ASPI managers for DOS/ W indows 3.1x. When you install Adaptec EZSCSI on these operating systems, it detects what kind of host adapter is installed in your computer and automatically configures your system with the correct ASPI manager .
Chapter 6 SCSI Setup and Configurations 87 4 . When the next screen appears, select either Format or V erify (to verify that the disk is free of surface defects), then press Enter . WARNING: Back up important data before you format the disk device! A low-level format erases all data from the disk.
88 SBC-596/599 User's Manual Run afdisk from the DOS prompt only , not from the W indows MSDOS prompt. Before you run it, be sure the disk devices you want to format and partition are connected to the host adapter and that they are powered. Then follow these steps: 1 .
Chapter 6 SCSI Setup and Configurations 89 5 . When the number of cylinders is what you want, press Esc. When the confirmation prompt appears, select Yes and press Enter to create the partition. To create more partitions on the same disk device, repeat steps 3,4, and 5.
90 SBC-596/599 User's Manual.
Chapter A Programming the Watchdog Timer 90 A Programming the Watchdog Timer The SBC-596/599 is equipped with a watchdog timer that resets the CPU or generates an interrupt if processing comes to a standstill for whatever reason. This feature ensures system reliability in industrial standalone, or unmanned, environments.
92 SBC-596/599 User's Manual Programming the Watchdog Timer In order to program the watchdog timer , you must write a program which writes I/O port address 443 (hex). The output data is a value of time interval. The value range is from 01(hex) to 3F(hex), and the related time interval is 1 sec.
Chapter B Pin Assignments 93 B Pin Assignments This appendix contains information of a detailed or specialized nature. It includes: • Speaker connector • HDD LED connector • Reset connector • .
94 SBC-596/599 User's Manual Speaker connector (CN1) SBC-596/599 Speaker connector (CN1) Pin Signal 1 VC C 2 NC 3 BZ 4 SP HDD LED connector (CN2) SBC-596/599 HDD LED connector (CN2) Pin Signal 1 .
Chapter B Pin Assignments 95 Power LED/keyboard lock connector (CN4) SBC-596/599 Keyboard lock connector (CN4) Pin Signal 1 PWLED 2 NC 3 GND 4 KLOCK 5 GND Fan power connector (CN5) SBC-596/599 Fan pow.
96 SBC-596/599 User's Manual Wide SCSI connector (CN6) SBC-599 Wide SCSI connector (CN6) Pin Function Pin Function 1 GND 2 GND 3 GND 4 GND 5 GND 6 GND 7 GND 8 GND 9 GND 1 0 GND 1 1 GND 1 2 GND 1 .
Chapter B Pin Assignments 97 SBC-599 Wide SCSI connector (CN6) Pin Function Pin Function 4 7 SCD7 4 8 SCDPL 49 GND 50 GND 5 1 TRMPWR 5 2 TRMPWR 53 N C 54 G ND 5 5 SA TIN- 5 6 GN D 5 7 SBSY- 5 8 SACK- .
98 SBC-596/599 User's Manual SCSI connector (CN7) SBC-599 SCSI connector (CN7) Pin Function Pin Function 1 G N D 2 SCD0 3 G N D 4 SCD1 5 G N D 6 SCD2 7 G N D 8 SCD3 9 G N D 1 0 SCD4 1 1 G N D 1 2.
Chapter B Pin Assignments 99 IDE hard drive connectors (CN8, CN9) SBC-596/599 IDE hard drive connector (CN8, CN9) Pin Signal Pin Signal 1 IDE RESET* 2 G N D 3D A T A 7 4 D A T A 8 5D A T A 6 6 D A T A.
100 SBC-596/599 User's Manual Floppy connector (CN10) SBC-596/599 Floppy connector (CN10) Pin Signal Pin Signal 1 G N D 2 DENSITY SELECT* 3 GND 4 N/ C 5 GND 6 N/ C 7 GND 8 INDEX* 9 G N D 1 0 MOTO.
Chapter B Pin Assignments 101 Flat panel connector (CN11) SBC-599 Flat panel connector (CN11) Pin Function Pin Function 1 +12 V 2 +12 V 3 GND 4 GND 5 5V/3.
102 SBC-596/599 User's Manual External keyboard connector (CN12) SBC-596/599 External keyboard connector (CN12) Pin Signal 1 KB_CK 2 KB_DT 3 NC 4 GND 5 V CC 5 4 3 2 1.
Chapter B Pin Assignments 103 1 5 6 10 1 5 9 6 COM port connectors (CN13: COM2, CN17: COM1) SBC-596/599 COM port connectors (CN13, CN17) Pin Signal 1 DC D 2 RX 3 TX 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI .
104 SBC-596/599 User's Manual Printer port connector (CN14) SBC-596/599 printer port connector (CN14) Pin Signal Pin Signal 1 STROBE* 14 AUTOFD* 2 D 0 1 5 ERR 3 D1 16 INIT* 4 D2 17 SLCTINI* 5 D 3.
Chapter B Pin Assignments 105 IR connector (CN15) SBC-596/599 IR connector (CN15) Pin Signal 1V CC 2N C 3 IR IN 4 GND 5 IR OUT CRT connector (CN16) SBC-599 CRT display connector (CN16) Pin Signal Pin .
106 SBC-596/599 User's Manual USB connectors (CN18, CN20) SBC-596/599 USB connectors (CN18, CN20) Pin Signal 1 +5 V 2 UV- 3 UV+ 4 GND 5 N/C Keyboard and PS/2 mouse connector (CN19) SBC-596/599 Ke.
Chapter B Pin Assignments 107 Ethernet 10BASE-T connector (UPT1) SBC-599 Ethernet 10BASE-T connector (UPT1) Pin Signal 1 XMT+ 2 XMT- 3 RCV+ 4 N/C 5 N/C 6 RCV- 7 N/C 8 N/C 9 N/C 1 0 N/C 9 7 5 3 1 10 8 .
108 SBC-596/599 User's Manual.
Chapter C IRQ Default Settings 108 C IRQ Default Settings.
110 SBC-596/599 User's Manual I RQ 15 IDE 2 I RQ 14 IDE 1 I RQ 12 (PS/2 mouse) IRQ1 1 USB/(SCSI) IR Q1 0 (LAN) IRQ9 IRQ7 LPT1 IRQ6 Floppy disk IRQ5 LPT 2 IRQ4 COM1 IRQ3 COM2 * IRQ 0, 1, 2, 8, 13 have been reserved for the system.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Adaptec SBC-596 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Adaptec SBC-596 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Adaptec SBC-596 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Adaptec SBC-596 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Adaptec SBC-596, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Adaptec SBC-596.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Adaptec SBC-596. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Adaptec SBC-596 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
