Manuale d’uso / di manutenzione del prodotto ACT-IR220L del fabbricante ACTiSYS
Vai alla pagina of 36
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 1 ACT-IR220L+/220L/200L IrDA PC Adapter User’s M anual ACTiSYS Cor p. 48511 W arm Springs Blv d, Suite 206 Fremont, CA 94539, USA TEL: (510) 490-8024, FAX : (510) 623-7268 E-Mail: irda-support@actisys.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 2 FCC & VCCI Compli ance Statement This device complies with part 15 of the FCC Rules.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 3 CONTENTS CONT ENT S .....................................................................................................................
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 4 INTRODUCTION This document pr ovides instr uct ions t o install the ACT I R220L+/220L/200L Serial-I R dong le along with W indow s 98/ME/2000 device driver.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 5 WINDOWS 98 INSTA LLA TION GUIDE Precaution : If you have not verified your Bios setup at t his point, we strongly recomm end you to refer back to t he Bios verif ication section and verify your Bios setup ag ain.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 6 8. Select No, the d ev ice isn’t in the list in the box. Then click Next . 9. Highlig ht Infrared Devices f rom the Hardw are ty pes list, then click Next .
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 7 11. From M anufacturers list, choose (Infrared COM port or dongl e) , f rom Inf rared Devices list, choose (G eneri c I nf rared Seri al Port or dongle) .
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 8 14. Select COM port which is physically connected to the D ongle. In mo st cases, the D ongle i s connected to COM2. Choose Communication Port (COM2 ) from the Po rt list, cl ick Next .
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 9 WINDOWS 98 UNINSTA LLA TION GUIDE 1. Boot up your computer system. 2. Click Control Panel . 3. Double click Sy stem Icon 4. Click Device Manager tab.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 10 7. Highlight (Generic Infrared Serial Port or Dongle) , then click Remov e . 8. Click OK in the Confirm Device Removal . 9. Cli ck on OK to restart y our computer.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 11 WINDOWS 2000 INSTA LLA TION GUIDE Note : If you do not chang e your com put er BI OS setting, STOP her e and g o to Chapter BI OS SETUP.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 12 7. Highlig ht A DD a new dri ve then click Next . 8. Choose No, I w ant sel ect the hardw are f orm a list then click OK 9. Select the Infrared device f r om the Hardw are ty pes .
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 13 10. From Manufact urers list, choose AC T i S Y S , fro m Infrared Device list, choose A CTiSYS IR-200L Serial I nf r ared Device f or IR200L; click Next > .
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 14 13. Cli ck Next> . 14. Choose COM2 in m ost case, then click Next > .
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 15 WINDOWS 2000 UNIST A LLA TION 1. Startup your computer system. 2. Click on Control Panel . 3. Double click Sy stem Icon. 4. Cli ck on Hardw a re tab, then click Dev ice Manager button.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 16 7. The device has been uninstal led and close devic e manager, restar t your computer .
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 17 WINDOWS ME INSTA LLA TION GUIDE Precaution : If you have not verified your Bios setup at t his point, we strongly recomm end you to refer back to t he Bios verif ication section and verify your Bios setup ag ain.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 18 8. Choose No I w ant to select t he hardw are from a list , then click Next> . 9. If you can not find Inf rared device fr om Hardware types list, choose Other devices from th e Hard ware ty pes list, then click Next >.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 19 12. Double click Add New Hardw are icon. 13. Click Next >. 14. Cli ck Next >. 15. Choose No I want select the hardware from list , then click N ext>.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 20 16. High light Infrared device fr o m H ardware ty pes list . Then click N ext> 17. Click Next > . 18. Click Next> 19. If your dev ice is IR200L, choose A CTiSY S IR200L , click Next > .
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 21 20. If your dev ice is phy sically connected to COM2, highligh t Communications ports (COM2), then click Next> . 21. Click Next > .
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 22 WINDOWS ME UNINSTA LLA TION GUIDE 1. Double click Sys te m System System Sys te m icon on C on trol Pa nel Control Panel Control Panel Control Panel.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 23 WINDOWS XP INSTA LLA TION GUIDE 1. Hig hlight My Computer , righ t click 2. Highlight Properties , lef t click 3. Click A dd New Hardw are Wizard .
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 24 4. Click Next . 5. Choose Yes , I have already …………….
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 25 7. Choose A dd a new hardw are device , t hen click Next > . 8. Choose install th e hardware that I ma nually select from a list (Advanced ), then click Next .
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 26 10. Choose respective ACT model, t hen click Next> 11.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 27 13. Click Fini sh.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 28 WINDOWS XP UN-INSTA LLA TION GUIDE 1.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 29 4. Highlight t he items under Infr ared device , then right click . 5. Click Uninstall 6. Click OK , you have successfully uninstalled the device on your sy stem.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 30 7. Click OK , you have successfully uninstalled the device on your sy stem.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 31 TROUBLE SHOOTING For help on gener al and m iscellaneous pr oblem s you may be experiencing with your printing , refer to the following pag es f or possible solutions.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 32 SPECIFICA TIONS Model : ACT-I R220L+/ACT-IR220L/ ACT-IR200L Carrier : Inf r ar ed r adiation (peak wavelength: 850 t o 1050nm) Sub-Carrier : 500 KHz for SHARP ASK- I R and ASK(37KHz) for T V remot e spec.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 33 Pin A ssignments : Serial I nt er face DB9 f emale connector Pin Name Sy mbol I/O Fun.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 34 WA RRA NTY INFOMA TION THE FOLLO W ING W ARRANT Y G IVES YOU SPECI FI C LEGAL RIGHT S. YOU MAY ALSO HAVE OTHER RIGH TS W HICH VA RY F ROM STATE TO STATE.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 35 ACTiSYS Corporat ion warrant s t o the fir st consumer purchaser, f or a period of 1 .
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 36 CONTA CT INFORMA TION A CTiSYS Corporation. 48511 Warm Springs Blvd, Suite 206 Fremont, CA 94539, USA TEL: (510) 490-8024, FAX: (510) 623-7268 E-Mail: irda-support@actisys.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il ACTiSYS ACT-IR220L è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del ACTiSYS ACT-IR220L - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso ACTiSYS ACT-IR220L imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul ACTiSYS ACT-IR220L ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il ACTiSYS ACT-IR220L, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del ACTiSYS ACT-IR220L.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il ACTiSYS ACT-IR220L. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo ACTiSYS ACT-IR220L insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
