IT
AEG logo
Manuale d'uso ufficiale

AEG MC 4463 CD

38 pagine·3.5 MB·Sistema audio·PDF·ENNLJA
AEG MC 4463 CD
Indice dei contenuti 19 sezioni Instruction Manual · General Safety Instructions · Special safety information · Overview of the Components · … MostraNascondi
Page 1 of the AEG MC 4463 CD user manual — Special safety information
Pagina 1 · clicca per ingrandire
Pagina 1

Instruction Manual

  • Never open the device’s case. Improper repairs can cause severe danger to the user. If the device or particularly the power cord is damaged, don’t use the device any further and have it repaired by a qualified specialist. Check the power cord regularly for damages.
  • To avoid any danger, a damaged power cord must be replaced only by the producer, its customer service or a similarly qualified person with an equal cord.
  • If the device won’t be used over an extended period of time, disconnect the power cord and remove the batteries.

Thank you for choosing our product. We hope you will enjoy using the appliance.

Symbols in these Instructions for Use Important information for your safety is specially marked. It is essential to comply with these instructions in order to avoid accidents and prevent damage to the machine:

These symbols may be found on the machine and are intended to indicate the following:

The lightning symbol should advise the user of parts in the inside of the device which carry dangerously high voltage levels.

The symbol with an exclamation mark should advise the user of important operation or maintenance instructions in the accompanying documentation.

General Safety Instructions

Devices bearing this symbol work with a “class 1 laser” for tracing the CD. The built-in safety switches should prevent the user being exposed to dangerous laser light, which is invis- ible to the human eye, when the CD compart- ment is opened.

Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the in- ternal packing. If you give this device to other people, please also pass on the operating instructions.

  • To avoid the risk of fire or electric shock, you should not expose the device to rain or humidity. Do not use the device near water (e.g. bathroom, swimming pool, humid cellars).
  • Do not use the unit in extremely hot, cold, dusty, or damp places.
  • The unit is designed solely for private use and its intended purpose. This unit is not designed for commercial use.
  • Make sure that the power cable is not bent, pinched, or comes into contact with heat sources.
  • Make sure that the power cable is not a tripping hazard.
  • Never touch the mains plug or the cord with wet hands.
  • Always connect the unit to a properly installed plug socket. Be sure the device voltage corresponds to the grid voltage.
  • The mains plug must always be easily accessible.
  • Always install batteries in the correct direction.
  • Avoid covering the device’s vent openings.
  • Never cover the vent holes with objects, such as magazines, tablecloths, curtains etc.
  • This appliance shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on apparatus.
  • Open sources of fire, such as e.g. burning candles may not be placed onto the unit.

Under no circumstances should these safety switches be bypassed or manipulated, as this could result in a danger of exposure to the laser light.

Children and Frail Individuals • In order to ensure your children‘s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.

  • This device is not intended to be used by individuals (including children) who have restricted physical, sensory or mental abilities and/or insufficient knowledge and/or experience, unless they are supervised by an individual who is responsible for their safety or have received instructions on how to use the device.
  • Children should be supervised at all times in order to ensure that they do not play with the device.

Special safety information

This device works with a class 1 laser.

Page 2 of the AEG MC 4463 CD user manual — Intended Use
Pagina 2 · clicca per ingrandire
Pagina 2

Overview of the Components

It may only be used in the manner described in these instruc- tions for use. The device must not be used for commercial purposes.

1 CD compartment 2 isplay 3 PUSH (push) open CD tray 4 IR Sensor for the remote control 5 (Play/Pause) button 6 AUX connection 7 USB connection 8 STANDBY button (on/standby) 9 VOL+/VOL- buttons (Increase/decrease volume) / (next/previous track) uttons 10 Control (Operational readiness)

Any other use of this device is considered to be contrary to the intended use and may result in damage to materials or even personal injury.

The firm ETV – Elektro-Technische Vertriebsgesellschaft mbH does not accept any liability for damage caused as a result of the use of this device contrary to its intended use.

Start-up of the device/Introduction

  • Select a suitable location for the device and for the loudspeakers. A dry, flat, non-slip surface on which the device can be easily operated.
  • Make sure that the device is adequately ventilated!
  • Connect the speakers on the back to the terminals “R and L”.
  • Remove the protective film from the display if it is still present.

Reverse Side (no picture) Loudspeaker connections (R/L) AC Mains connection FM ANT. throw-out aerial

Remote Control 1 MUTE button (mute) 2 Number buttons 3 +10 button 4 ALB+ button (up album) 5 button (next title / search run forward) button (title piece / search run backward) / buttons (increase / decrease volume) 6 TUNE+ button (Radio search run upward) 7 FM button 8 SOURCE button (function selection button) 9 AUTO/STOP button (Station scan/Stop) 10 RANDOM button (Shuffle replay) 11 ST/MONO button 12 MEMORY button (memory) 13 EQ button (Equalizer) 14 SLEEP button (sleep timer) 15 REPEAT button (repeat) 16 INTRO button 17 CD button 18 USB button 19 TUNE- button (Radio search backwards) 20 button (Play/Pause) 21 ALB- button (down album/radio stations) 22 PROG button (Memory) 23 STANDBY button (on/standby)

  • Power Supply
  • Please ensure that the mains voltage corresponds to the information on the type plate.
  • Insert the plug into a properly installed power socket.

Batteries of remote control (Batteries not included) 1. Open the cover of the battery compartment on the rear side of the remote control. 2. Insert 2 x R03 “AAA” 1.5 V batteries. Please observe cor- rect polarity (see bottom of battery compartment)! 3. Close the battery compartment.

  • CAUTION:
  • Batteries may leak and lose their battery acid. If the remote control is not used for long periods of time, remove the batteries.
  • Different battery types or new and used batteries must not be used together.
  • Do not dispose of batteries with your household trash. Please hand over at authorized collection points or return to your dealer.

Intended Use

This device is used for

  • The reception of radio programmes
  • Playing back audio/MP3 CDs
  • Sound reproduction of external audio sources.

CD deck transport protection • Please open the CD compartment (1) by pressing the PUSH button (3).

It is intended exclusively for this purpose and may only be used as such.

Page 3 of the AEG MC 4463 CD user manual — Listening to the Radio
Pagina 3 · clicca per ingrandire
Pagina 3
  • Remove the transport protection from the CD player if present before use.
2. Use the buttons TUN+ (6) and TUN- (19) to tune to the desired station. When you hold down either button, the unit tunes to the next radio station. The display shows the tuned frequency. 3. In case the reception is too weak and if the received station has atmospheric noise, you will have the following possibilities: a) Switch the device to Mono operation. Press the ST/

General Operation

  • NOTE:
  • Some buttons are to be found both on the device itself and on the remote control. Buttons with the same designation have the same function.
  • Operation of the unit is described by the buttons of the remote control.

MONO button (11) to do so. The stereo indicator “ST” lights up on the display. b) Try to improve the reception through a position

change or through coiling in and out of the antenna.

Infrared remote control For wireless control at a distance of approx. 4 meters. If this range decreases, the batteries must be replaced. During use, ensure that there are no obstacles between the remote control and the sensor (4) on the unit.

Save radio stations The unit can store up to 30 radio stations. To store a station, proceed as follows:

1. Find a station as described in “Find stations”. 2. Press the MEMORY button (12). The display starts flashing. 3. Use the buttons and (5) to select the memory where the station is to be stored. 4. Press the MEMORY button again. The station is stored and the display stops flashing.
  • Turning the unit on/off
  • Press the STANDBY button (23), to turn the unit on.
  • Press the STANDBY button again to turn the unit off. The power indicator lamp (10) lights up.
  • Call a stored radio station
  • You can call the stored radio stations with the number buttons (2). For stored radio stations above 10, first press the 10+ button.
  • Alternatively, you can also use the buttons and (5).

Volume You can use the VOL+/VOL- buttons (5) to set the desired volume.

Automatic scanning Briefly hold down the AUTO/STOP button (9). With this, the entire frequency range is scanned automatically for stations. The stations found by scanning are stored in ascending order in the memory locations 1 to 30.

MUTE (1) Quickly turn off the sound. The indication “MUTE” appears in the display. To cancel this function, press MUTE again.

EQ (13) (Preset equalizer function). There are different sound modes available (FLAT, ROCK, CLASSIC, JAZZ, POP).

Setting the sleep timer When the sleep timer has been set, the unit is switched off after a preset time. Press the SLEEP button (14) to activate the sleep timer. By repeatedly pressing the SLEEP button, the off time can be set as 90, 80, 70, 60, 50, 40, 30, 20, 10 minutes. To turn off the sleep timer, press the SLEEP button until the symbol “SL” on the display goes out. “S - 00” appears in the display for a short amount of time.

Playing CDs/MP3

This is how you play a CD 1. Press the SOURCE button (8) until dISC shows in the display. Alternatively you can also press the CD button (17) to select CD mode. 2. In order to open the CD compartment (1), press the PUSH button. 3. Insert an audio CD with the printed side facing upwards on to the central cone so that the CD clicks into place and then close the lid of the CD compartment. The message “rEAd” will be shown on the display for a short time. For an audio CD: The total number of tracks and the playing time of the CD is shown.

Listening to the Radio

Find stations 1. Press the SOURCE button (8), until FM shows in the display. Alternatively you can also press the FM button (7) to select radio mode.

Page 4 of the AEG MC 4463 CD user manual — Programmed Play
Pagina 4 · clicca per ingrandire
Pagina 4

For an MP3-CD/file: The number of files and titles are then shown. 4. The CD will play from the first title. The current track, or MP3 and the elapsed playing time are shown on the display. 5. In order to remove a CD, please press the AUTO/STOP button (9), open the CD compartment and lift the CD out carefully.

Press twice = (REP ALL all emits a fixed light) the whole CD is played continuously. Press three times = all functions are cancelled. The normal

play mode is resumed.

Only with MP3 music playback:

Press once = the current track is repeated continu- ously (REP appears in the display). Press twice = the current folder of the MP3 CD or of the USB storage medium is repeated continuously (REP ALB appears in the display). You can select the individual folders with the buttons ALB+ and ALB- (4/21). Press three times = the whole CD is played continuously

Always keep the CD deck closed.

  • NOTE:
  • When a disc is inserted upside down or when no disc is inserted, “NO dISC” (no disc) is shown on the display.
  • Playback of CDs produced by the user cannot be guaranteed due to the large variety of software and CD media available.

(REP ALL appears in the display). Press four times = the function is deactivated and the CD is played in the normal mode.

Description of the CD buttons

(20) You can briefly interrupt and resume playback using this but- ton. The symbol ” “ appears on the display. Pressing again continues playback.

RANDOM (10) The display contains the word RND and the track number that is to be played first. All tracks are played back in random order.

/ (5) During music playback:

INTRO (16) (The display shows INTRO) Each title of the CD is played for 10 seconds.

With you can jump to the next or previous track etc.

  • If the button is kept pressed down, the machine starts to search through the tracks. (The sound is thereby set to mute.)

ALB+ or ALB- (4/21) Press these buttons during playback to select the next folder up or down. If this button is pressed in stop mode the display also appears briefly. Then start playback with the button (20).

The button can be used as follows:

Press once = This jumps back to the previous track. Press twice = This plays the song before etc. If the button is kept pressed down, the machine starts to search through the tracks. (The sound is thereby set to mute.)

10+ (3) Is used to directly enter a title number.

  • Press the button once, titles above 10 can be entered. 01appears on the display.
  • If there are more than 19 titles on a CD or USB storage device, the entry option can be increased by 10 titles each time you press the button. 02etc. appears on the display.

AUTO/STOP (9) The music playback is stopped. If an audio CD is inserted, the overall number of songs and the playback time of the CD are now displayed. In case of an MP3 CD or USB storage medium, the number of folders and the overall number of songs will be displayed.

Programmed Play

This can be used to program any desired sequence of tracks. (Only for CD/USB operation)

In Radio mode: Press this button to start automatic station scanning. Impor- tant: The stations that you stored previously are overwritten.

1. Press the AUTO/STOP button (9). 2. Press the PROG button (22). “P01” (preset location) appears on the display and the title “00” or “000” in the case of MP3 CDs/files. Use the / buttons (5) to select the desired track and then press the PROG button again. The display changes to memory slot P02.

REPEAT (15) In case of a playing Audio CD:

Press once = (REP emits a fixed light) the current track is repeated continuously.

Page 5 of the AEG MC 4463 CD user manual — Connection of external devices
Pagina 5 · clicca per ingrandire
Pagina 5
1. Press the SOURCE button (8) until USB shows in the display. Alternatively you can also press the USB button (18) to select USB mode. 2. Insert a USB storage medium directly into the corre sponding connection. 3. “USb” appears briefly on the display. The number of folders and titles are then displayed. 4. Playback then begins. The current track, MP3 and the elapsed playing time is shown on the display.
  • NOTE:
  • You can also directly enter the titles. Enter the desired title with the numeric buttons on the remote control.
  • When the storage capacity of the titles to be programmed has been reached, the message “FULL” will appear on the display.
3. Select the next track with the / buttons and press the PROG button again. Repeat the procedure until all the desired tracks are selected. 4. Press the button (20). The playback starts. The first selected title number is shown on the display, and the indicator CD or MP3 lights up. 5. Press the AUTO/STOP button (9), playback stops and the programming is deleted.

For operating instructions please see the section “Playing CDs/MP3s”.

  • NOTE:
  • Always directly connect a USB storage medium to the USB port to prevent any malfunctions.
  • The USB port is not designed for charging external devices.

The device stops automatically after all programmed titles have been played back. The programmed sequence is deleted from the memory.

Playing back Music in MP3 Format

With this device it is possible to play back pieces of music in MP3 format. The device also supports all standard CD types: CD, CD-RW, CD-R. This machine of is able to play MP3 CDs. Up to 200 tracks can be compressed and stored on these CDs. Your machine detects an MP3 CD automatically (the total number of tracks and MP3s appears in the display). If you would like to play one of these CDs, proceed as described under “Playing CDs/MP3”. Tracks can be programmed as described under “Playing Back Programmed Tracks”.

AUX IN jack (6) Connect analogue playback devices. When connecting to this jack you may also listen to the audio of other devices, such as MP3 or CD players etc., via the speakers.

1. Please connect the external device via 3.5 mm plug jack to the AUX IN jack. 2. Now use SOURCE button (8) to select LINE IN mode. 3. You can hear the sound from the external device through the loudspeakers. You can use the VOL+/VOLbuttons (5) to adjust the volume. The CD buttons are not active. 4. For further functions please refer to the user manual of the external audio device.

Please note: There are a number of different recording and compression methods, as well as quality differences between CDs and selfrecorded CDs.

Further more, the music industry does not adhere to fixed standards (copy protection).

Cleaning and Maintenance

For these reasons it is possible that in rare cases there are problems with the playback of CDs and MP3 CDs. This is not a malfunction of the device.

Connection of external devices

  • Always remove the mains plug before cleaning the machine.
  • Any marks on the surface can be wiped off with a slightly damp cloth without any additives.

USB Connection (7) This device has been developed in accordance with the latest technical developments in the USB field. Unfortunately the large number of different types of USB storage media on offer today makes it impossible to guarantee full compatibil- ity with all USB storage media. For this reason there may be problems in rare cases with playing back from USB storage media. This is not a malfunction of the device.

Page 6 of the AEG MC 4463 CD user manual — Technical Data
Pagina 6 · clicca per ingrandire
Pagina 6

Troubleshooting

Symptoms Course Solution CD can not be played back.

Ensure that the disc is inserted with the label facing upwards. CD jumps during playback.

CD is not inserted or inserted incor- rectly.

Disposal

Check the disc for fingerprints, dirt or scratches. The device can- not be operated.

Check the disc for fingerprints, dirt or scratches.

Meaning of the “Dustbin” Symbol Protect our environment: do not dispose of electrical equip- ment in the domestic waste.

The device is blocked, i.e. “stuck”.

Remove the mains plug for approxi- mately 5 seconds. Then turn the device on again.

Please return any electrical equipment that you will no longer use to the collection points provided for their disposal.

This helps avoid the potential effects of incorrect disposal on the environment and human health.

This will contribute to the recycling and other forms of reutili- sation of electrical and electronic equipment.

Technical Data

Information concerning where the equipment can be dis- posed of can be obtained from your local authority.

Model: MC 4463 CD Power supply: 100-240 V~ 50/60 Hz Power consumption: 10 W Protection class: II Net weight: 1.97 kg

Radio sectionFrequency ranges:.......................................FM 87.5 ~ 108.0 MHz

The right to make technical and design modifications in the course of continuous product development remains reserved.

This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations.

Page 7 of the AEG MC 4463 CD user manual — Troubleshooting
Pagina 7 · clicca per ingrandire
Pagina 7
Page 7 of the AEG MC 4463 CD user manual — Troubleshooting
Page 8 of the AEG MC 4463 CD user manual — Troubleshooting
Pagina 8 · clicca per ingrandire
Pagina 8
Page 8 of the AEG MC 4463 CD user manual — Troubleshooting
Page 9 of the AEG MC 4463 CD user manual — Troubleshooting
Pagina 9 · clicca per ingrandire
Pagina 9
Page 9 of the AEG MC 4463 CD user manual — Troubleshooting
Page 10 of the AEG MC 4463 CD user manual — www.etv.de
Pagina 10 · clicca per ingrandire
Pagina 10
  • GARANTIEKARTE warranty card
  • garantiekaart
  • carte de garantie
  • scheda di garanzia
  • tarjeta de garantía
  • cartão de garantia
  • garantikort
  • karta gwarancyjna
  • záruční list
  • kartica jamstva
  • carte de garanţie
  • Гаранционна карта
  • záručný list
  • garancijski list
  • garanciajegy
  • гарантійнийформуляр
  • Гарантийный талон
  • نامض ةقاطب

MC 4463 CD

  • 24 Monate Garantie gemäß Garantieerklärung
  • 24 months warranty according to warranty declaration
  • 24 maanden garantie volgens garantieverklaring
  • 24 mois de garantie selon la déclaration de garantie
  • 24 mesi di garanzia secondo la dichiarazione di garanzia
  • 24 meses de garantía de acuerdo con la declaración de garantía
  • 24 meses de garantia, de acordo com a declaração de garantia
  • 24 måneders garanti i henhold til garantibetingelsene
  • 24 miesiące gwarancji na podstawie oświadczenia gwarancyjnego
  • záruka 24 měsíců podle prohlášení o záruce
  • 24 mjesečno jamstvo u skladu s jamstvenom deklaracijom
  • 24 luni garanţie conform declaraţiei de garanţie
  • 24 месеца гаранция в съответствие с гаранционната декларация
  • 24-mesačná záruka podľa vyhlásenia o záruke
  • 24-mesečna garancija, skladno z garancijsko izjavo
  • 24 hónap garancia a garanciafeltételekben leírtak szerint
  • гарантія на 24 місяці відповідно заяві про гарантію
  • Гарантия 24 месяца согласно заявленным гарантийным правилам
  • نامضلا نايبل اًقفو اًرهش 42 ةدمل نامض
  • Kaufdatum, Händlerstempel, Unterschrift
  • date of purchase, dealer stamp, signature
  • aankoopdatum, dealerstempel, handtekening
  • date d‘achat, tampon du concessionnaire, signature
  • data di acquisto, timbro del rivenditore, firma
  • fecha de compra, sello del distribuidor, firma
  • data de compra, carimbo do distribuidor, assinatura
  • kjøpsdato, forhandlerstempel, signatur
  • data zakupu, pieczęć sprzedawcy, podpis
  • datum zakoupení, razítko prodejce, podpis
  • datum kupovine, žig trgovca, potpis
  • data de achiziţie, ştampila furnizorului, semnătura
  • Дата на покупката, Печат на Продавача, Подпис
  • dátum nákupu, pečiatka obchodníka/predajcu, podpis
  • datum nakupa, žig trgovca, podpis
  • vásárlás dátuma, kereskedő bélyegzője, aláírás
  • дата придбання, печатка продавця, підпис
  • Дата приобретения, Штамп продавца, Подпись
  • عيقوتلا ,عئابلا/ليكولا متخ ,ءارشلا خيرات

www.etv.de

Elektro-technische Vertriebsges. mbH

www.etv.de

Stand 04/14

Fonti

Riferimenti e link

Pagine di riferimento in questo manuale: produttore, supporto e download.

Riparazione

Risoluzione dei problemi

Problemi comuni, cause probabili e soluzioni.

ProblemaPossibile causaSoluzione
CD can not be played back.Ensure that the disc is inserted with the label facing upwards. p.6
CD jumps during playback.Check the disc for fni gerprints, dirt or scratches. p.6
The device can- not be operated.Remove the mains plug for approxi- mately 5 seconds. Then turn the device on again. p.6

Fai una domanda su AEG MC 4463 CD

I possessori del prodotto e il nostro team di solito rispondono entro 24 ore, e la tua domanda sarà utile anche ad altri.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
Nessuna domanda ancora per il dispositivo AEG MC 4463 CD

Invia la prima domanda: risponderanno altri possessori o il nostro team.

Documento originale

AEG MC 4463 CD manuale in PDF

38 pagine·3.5 MB·Sistema audio·PDF
Clicca su qualsiasi pagina in alto per aprirla qui
Pagina 1 / …
100%
Caricamento pagine…