Manuale d’uso / di manutenzione del prodotto 454 del fabbricante Yard-Man
Vai alla pagina of 20
IMPORTANT: Read safety rules and instructions carefully before operating equipment. MTD PRODUCTS INC P.O. BOX 368022 CLEVELAND, OHIO 44136-9722 Rear Tine Tiller Model 454 PRINTED IN U.
2 TABLE OF CONTENTS Content Page Important Safe Operation Practices ................................................................... 3 Loose Parts & Hardware Pack ........................................................................... 5 Assembling Your Tiller .
3 SECTION 1: IMPORTANT SAFE OPERATION PRACTICES WARNING: This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine.
4 4. Keep bystanders, helpers, pets, and children at least 75 feet from the machine while it is in operation. Stop the machine if anyone enters the area. 5. Be careful when tilling in hard ground. The tines may catch in the ground and propel the tiller forward.
5 SECTION 2: LOOSE PARTS Handle Assembly Depth Stake Assembly Control Rod NOTE: Cable tie not shown..
6 SECTION 3: ASSEMBLING YOUR TILLER IMPORTANT: The Engine is shipped WITHOUT GASOLINE or OIL. After assembly, see separate engine manual for proper fuel and engine oil recommendations. NOTE: Left and right is determined from the operator’s position, standing behind the tiller.
7 Figure 3 Attaching The Clutch Cable Attach the clutch cable to the handle as follows (be careful not to kink the cable). • Remove threaded eyebolt and nut from the end of the cable. • Route the clutch cable to the right side of the handle mounting brackets and underneath the handle.
8 Now move the shift lever to FORWARD (Wheels Forward) position. Carefully engage the clutch by lifting the clutch control bail against the handle. The wheels should spin.
9 SECTION 5: OPERATING YOUR TILLER NOTE: Engine is shipped without oil. WARNING: Use the reverse tine drive when tilling virgin ground, sod or hard soil. Use the forward tine drive when cultivating or tilling soft ground. Before Starting • Service engine with oil as instructed in the separate engine manual packed with your unit.
10 Place side shield in position desired. Replace wing nuts and tighten securely. Figure 8 To Operate The Tiller • Select the depth stake setting. • Start engine as instructed on page 9. • Move gear selection handle to one of the forward modes or reverse.
11 SECTION 7: SERVICE Transmission— The transmission is pre-lubricated and sealed at the factory. It requires no checking unless the transmission is disassembled. To fill with grease, lay the right half of the transmission on its side. Add 30 ounces of Benalene 920 grease.
12 Figure 9 Upon reassembly, make certain the belt is routed over the idler pulley and inside of belt keepers by engine pulley. See Figure 10. Figure 10 Tires Recommended operating tire pressure is approximately 20 p.s.i. (check sidewall of tire for tire manufacturer’s recommended pressure).
13 SECTION 10: TROUBLE SHOOTING GUIDE NOTE: For repairs beyond the minor adjustments above, contact your local authorized service dealer. Trouble Possible Cause(s) Corrective Action Engine fails to start Fuel tank empty, or stale fuel. Throttle control lever not in correct starting position (if so equipped).
14 SECTION 11: PARTS LIST FOR MODEL 454.
15 Model 454 REF. NO. PART NO. DESCRIPTION 1. 611-0020 Wheel Shaft Ass’y: 33T 2. 611-0021 Tine Shaft Ass’y: 18T 3. 611-0128 Jack Shaft Ass’y 4. 611-0129 Input Shaft Ass’y 5. 617-0058 Rev. Idler Gear Ass’y: 30T 6. 617-0059 Ftine Idler Gear Ass’y: 30T 7.
16 Model 454 20 18 8 23 10 1 60 61 37 62 25 34 27 64 30 39 27 63 26 32 36 33 31 29 66 26 41 30 30 24 28 35 40 26 49 44 50 59 51 65 53 55 56 54 57 58 44 46 42 4 9 11 16 6 3 14 7 19 5 17 2 60 61 12 15 1.
17 Model 454 REF. NO. PART NO. DESCRIPTION 1. 747-1152 Shift Rod 2. 649-0041 Upper Handle Ass’y 3. 649-0034 Lower Handle Ass’y 4. 710-3005 Hex Screw 3/8-16 x 1.25 5. 710-3056 Hex Screw 5/16-18 x 3.25 6. 711-0415 Clevis Pin 3/8-1.62 7. 712-0379 Flange Lock Nut 3/8-24 8.
18 Model 454 18 17 24 19 27 46 45 12 26 9 6 1 8 25 14 28 20 2 11 44 4 22 23 16 5 21 7 13 15 3 40 43 42 41 39 32 33 31 30 29 10 34 37 36 37 38 35.
19 Model 454 REF. NO. PART NO. DESCRIPTION 1. 686-0111 Belt Cover Brkt. Ass’y 2. 710-0237 Hex Bolt 5/16-24 x .62" Lg. 3. 710-0412 Hex Bolt 1/4-28 x .75" Lg. 4. 710-0502A Hex Wash.TT-Sems Screw 3/8-16 x 1.250" Lg. 5. 710-0591 Hex Bolt 3/8-24 x 1.
MANUFACTURER’S LIMITED WARRANTY FOR: The limited warranty set forth below is given by MTD PRODUCTS INC (“MTD”) with respect to new merchan- dise purchased and used in the United States, its posses- sions and territories.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Yard-Man 454 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Yard-Man 454 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Yard-Man 454 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Yard-Man 454 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Yard-Man 454, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Yard-Man 454.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Yard-Man 454. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Yard-Man 454 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.