Manuale d’uso / di manutenzione del prodotto RX-V677 del fabbricante Yamaha
Vai alla pagina of 146
English AV Receiver Owner’s Manual Read the supplied booklet “Safety Brochure” before using the unit..
En 2 CO N T E N T S Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 FEATURES 6 What you can do with the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
En 3 Listening to FM/AM radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Setting the frequency step s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
En 4 APPENDIX 120 Frequently asked q uestions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 Power, system and remote control .
Accessories En 5 Ac cessories Check that the following accessories are supplied with the product. Remote control Batteries (AAA, R03, UM-4) (x2) AM antenna FM antenna *One of the above is supplied depen ding on the region of purchase.
FEATURES ➤ What you can do with the unit En 6 FEA TURES Wha t you can do with the unit A V receiver (the unit) Speakers BD /D V D playe r HDMI Control Audio/Video TV remote control Au di o HDMI Control Audio Audio/Video TV Sequential operat ion of a TV , A V receiver, and BD/DVD play er (HDMI Control) .
FEATURES ➤ What you can do with the unit En 7 F ull of useful func tions! ❑ Connecting v arious devic es (p .25) A number of HDMI jacks and various inp ut/output jacks on the unit allow you to connect video devices (such as BD/DVD players), audio de vices (such as CD players), game consoles, camcorders, and other devices.
FEATURES ➤ Part names and functions En 8 Fr ont panel (RX- V777) 1 MAIN ZONE z key T urns on/of f (standby) the u nit. 2 Standby indicator Lights up when the unit is in standby mode under any of the following conditions. • HDMI Contorol is enabled (p.
FEATURES ➤ Part names and functions En 9 Fr ont panel (RX- V677) 1 MAIN ZONE z key T urns on/of f (standby) the u nit. 2 Standby indicator Lights up when the unit is in standby mode under any of the following conditions. • HDMI Contorol is enabled (p.
FEATURES ➤ Part names and functions En 10 Fr ont display (indicators) 1 ECO Lights u p when the unit is in th e eco mode (p .113). 2 HDMI Lights u p when HDMI s ignals are being in put or output .
FEATURES ➤ Part names and functions En 11 Rear panel (RX- V777) 1 REMOTE IN/OUT jacks For connecting to an infrar ed signal receiver/emitter that allows you to operat e the unit and other devices fr om another room (p.80) . 2 TRIGGER OUT jack For connecting to a device th at suppor ts the trigger f unction (p.
FEATURES ➤ Part names and functions En 12 Rear panel (RX- V677) 1 REMOTE IN/OUT jacks For connecting to an infrar ed signal receiver/emitter that allows you to operat e the unit and other devices fr om another room (p.80) . 2 TRIGGER OUT jack For connecting to a device th at suppor ts the trigger f unction (p.
FEATURES ➤ Part names and functions En 13 Remote control 1 Remote c ontr ol s ignal transmitter T ransmits infrar ed signals. 2 z (receiver power) key T ur ns on /off ( standby) th e unit. 3 Input s election keys Select an input source for playback.
PREPARATIONS ➤ General setup procedure En 14 PREP ARA TIONS This completes all the preparations. Enjoy playing movies, music, ra dio and other content with the unit! General se tup proc edure 1 Placing speakers (p.15) Select the speaker layout for the n umber of speaker s that you are using and place them in your r oo m.
PREPARATIONS ➤ Placing speakers En 15 Select the speaker layout for the number of speakers that you ar e using and place the speakers and subwoofer (with built-in amplifier) in your room. This section describes the representative speaker layout examples.
PREPARATIONS ➤ Placing speakers En 16 7.1+2- channel sy stem • The surround back speakers and presence speakers do not produce sounds simultaneously . The unit automatically changes the speakers to be used, depending on the selected CINEMA DSP (p.
PREPARATIONS ➤ Placing speakers En 17 5.1-channel system This speaker system creates Virtual Presence Speaker (VPS) using the front, center and surround speakers to produce a 3-dimensional sound field, and is suited for enjoyin g 5.1-channel contents.
PREPARATIONS ➤ Placing speakers En 18 2.1-channel system Even when no surround speakers are connected, the unit creates the virtual surround speakers using the front speakers to allow you to enjoy multi-chan nel surr o und sound (Virtual CINEMA DSP).
PREPARATIONS ➤ Connecting speakers En 19 Connect the speakers placed in your room to the unit. The following diagrams provide connections for 7.1+2-, 7.1-, and 6.1-channel systems as examples. For other systems, connect speakers while referring to the connection diagram for the 6.
PREPARATIONS ➤ Connecting speakers En 20 7.1-channel system (using presence speak ers) 6.1-channel system ■ C onnec ting speake r cables Speaker cables have two wires. One is for connecting the negative (-) ter minal of the unit and the speaker , an d the other is for the positive (+) ter minal.
PREPARATIONS ➤ Connecting speakers En 21 Push-type speaker terminals (RX-V677 only) a Remov e approximat ely 10 mm (3/8”) of insulati on from the ends of the speaker cable, and twist the bare wires of the cable fir mly together. b Press down the tab.
PREPARATIONS ➤ Input/output jacks and cables En 22 ■ Video/audio jacks ❑ HDMI jacks T ransmit digital video and digi tal sound thr ough a single jack. Use an HDMI cable. • Use a 19-pin HDMI cable with the HDMI logo. We recommend using a cable less than 5.
PREPARATIONS ➤ Connecting a TV En 23 Connect a TV to the unit so that video input to the unit can be outp ut to the TV . Y ou can also enjoy playback of TV audio on the unit. T o maximize the per formance of the unit, we recommend connecting a TV with an HDMI cable.
PREPARATIONS ➤ Connecting a TV En 24 ❑ VIDEO (c omposite video) c onnec tion (with a video p in cable) ■ Connecting another T V or a projector (RX-V777 only) The unit has two HDMI output jacks.
PREPARATIONS ➤ Connecting playback devices En 25 The unit is equipped with a variet y of inpu t jacks including HDMI input jacks to allow you to connect different types of playback devices. For information on how to connect an iPod or a USB storage de vice, see the following pages.
PREPARATIONS ➤ Connecting playback devices En 26 ■ Composite video connec tion Connect a video device to the unit with a vi deo pin cable and an audio cable (digital coaxial, digital optical, or stereo pin cable). Choose a set of inp ut jacks (on the unit) depending on the audio output ja cks available on your video device.
PREPARATIONS ➤ Connecting playback devices En 27 • The following oper ation is a vailable only when your TV is connected to the unit via HDMI. 1 After connecting extern al devices (such as a TV and playbac k devices) and power cable of the unit, turn on the un it.
PREPARATIONS ➤ Connecting playback devices En 28 Co nnecting audio devices (such as CD pla yers) Connect audio devices such as CD p layers, MD players, and a turntable to the unit. Depending on the audio output jacks availabl e on your audio device, choose one of the following connections.
PREPARATIONS ➤ Connecting the FM/AM antennas En 29 ❑ MHL connection Connect an MHL-compatible mobile device (such as smartphones) to the unit with an MHL cable. Y ou ca n enjoy full HD videos and multichannel audio sources stored on the mobile device.
PREPARATIONS ➤ Connecting a network cable or the wireless antenna En 30 Connect the unit to a router (access point) with a network cable, or connect the supplied wireless antenna for establishing a wireless network connection.
PREPARATIONS ➤ Connecting other devices En 31 Connecting an extern al pow er amplifi er (RX-V777 only) When connecting an exter nal power amplifier (pre-main amplifier) to enhance speaker output, connect the input jacks of the power amplifier to the PRE OUT jacks of the unit.
PREPARATIONS ➤ Connecting the power cable En 32 Connecting a device c ompatible with the trigger function The trigger function can control an external d evice in conjunction with operating the unit (such as powering on/off and input select ion).
PREPARATIONS ➤ Selecting an on-screen menu language En 33 Select the desired on-screen menu language from English (default), Japanese, French, German, S panish, Russian, Italian and Chinese. 1 Press z (receiver power) to turn on the unit. 2 T urn on the TV and switc h the TV inpu t to display video fr om the unit (HDMI OUT jack).
PREPARATIONS ➤ Optimizing the speaker settings automati cally (YPAO) En 34 The Y amaha Parametric room Acoustic Optimizer (YP AO) function detects speaker connections, measures the distances from th.
PREPARATIONS ➤ Optimizing the speaker settings automati cally (YPAO) En 35 (RX-V677) The f ollo wing screen appears on the TV . This completes the prepar ations. See “Measuring at one l istening posit ion (single mea sure)” (p .36) to star t the meas urement.
PREPARATIONS ➤ Optimizing the speaker settings automati cally (YPAO) En 36 This completes the preparations. See the following page to start the measurement. When “Multi Position” is set to “Y es”: “Measuring at multiple listening po sitions (multi measur e) (RX-V777 only)” (p.
PREPARATIONS ➤ Optimizing the speaker settings automati cally (YPAO) En 37 3 T o save the measurement results, use the cursor keys ( e / r ) to select “SA VE” and pr ess ENTER. The adjusted s peaker settings are applied. • T o finish the measurement with out sa ving the result, select “CANCEL”.
PREPARATIONS ➤ Optimizing the speaker settings automati cally (YPAO) En 38 3 When the measurements at the positions you want to measure are completed, use the cursor keys to select “CANCEL” and press ENTER. When yo u hav e taken measurements at 8 listenin g positions , the fol lowing screen appears au tomatically .
PREPARATIONS ➤ Optimizing the speaker settings automati cally (YPAO) En 39 Checking the meas urement r esults Y ou can check the YP AO me asur eme nt r esu lts. 1 After the measurement, use the cursor keys to select “Result” and press ENTER. • Y ou can also select “Result” from “Auto Setup” (p.
PREPARATIONS ➤ Optimizing the speaker settings automati cally (YPAO) En 40 Error messages If any error message is displayed during the meas urement, resolve the problem and perform Y P AO again. Error messag e Cause Remedy E-1: No Front SP Fr ont speakers are not detect ed.
PREPARATIONS ➤ Optimizing the speaker settings automati cally (YPAO) En 41 W arning messages If a warnin g message is displayed after the measurement, you can still save the measurement r esults by following on-screen inst ructions. However , we recommend you per form YP AO again in or der to use the unit with the optimal speaker settings.
PREPARATIONS ➤ Connecting to a network device wirelessly En 42 Connect the unit to a wireless router (access po int) or a mobile d evice by establishing a wireless connection. Selecting the connection method Select a connection method according to your network environment.
PREPARATIONS ➤ Connecting to a network device wirelessly En 43 C onnec ting the unit to a wireless netw ork There ar e several methods to connect the unit to a wireless network.
PREPARATIONS ➤ Connecting to a network device wirelessly En 44 9 Connect the iOS device to the USB jack, and disable the screen lock on the iOS device. 10 Use the cursor keys ( e / r ) to select “NEXT” and press ENTER. 11 T ap “Allow” in the message appeared on the iOS device.
PREPARATIONS ➤ Connecting to a network device wirelessly En 45 ■ C: Using other connection method s If your wireless r outer (access po int) does not suppor t WPS push button configuration method, follow the procedure below to configure the wireless network settings.
PREPARATIONS ➤ Connecting to a network device wirelessly En 46 ❑ Searching for an acc ess point If you select “Access Point Scan” as the connection method, the unit starts searching for access points. After a while, the list of available access points appears on the TV screen.
PREPARATIONS ➤ Connecting to a network device wirelessly En 47 3 Use the cursor keys and ENTER to enter the security key and select “NEXT”. If you sel ect “None” in Step 2, this setti ng is not av ailable . Proceed to Step 4. If you sel ect “WEP”, enter eit her 5 or 13 character string, or 10 or 26 hex adecimal digits.
PREPARATIONS ➤ Connecting to a network device wirelessly En 48 C onnec ting a mobile devic e to the unit di re ctl y (W ir el es s Di re ct) Follow the procedure below to connect a mobile device to the unit directly . • Wireless Direct connection may be insecure since the communication is not strongly encrypted .
PREPARATIONS ➤ Connecting to a network device wirelessly En 49 9 Use the cursor keys and ENTER to enter the security key and select “NEXT”. If you sel ect “None” in Step 8, this setti ng is not av ailable . Proceed to Step 10. Otherwise, enter either 5 or 13 character st ring.
PLAYBACK ➤ Basic playback procedure En 50 PLA YBA CK 1 T urn on the external devices (such as a TV or BD/D VD player) connected to the unit. 2 Use the input selection keys to select an input sour ce . 3 Start playback on the external de vice or select a radio station.
PLAYBACK ➤ Selecting th e input source and favori te settings with one touch ( SCENE) En 51 The SCENE function allows you to select th e assigned input source, sound program, Compressed Music Enhancer on/off, and HDMI output jack (RX-V777 only) with just one touch.
PLAYBACK ➤ Selecting the sound mode En 52 The unit is equipped with a variety of sound programs and surround decoders that allow you to enjoy playback sources with your favorite sound mode (such as sound field effect or stereo playback). ❑ Selecting a sound program suitable for movies • Pre ss M OVI E rep eate dl y .
PLAYBACK ➤ Selecting the sound mode En 53 Enjoying stereoscopic so und fields ( CINEMA DSP 3D) The unit is equipped with a variet y of sound programs that utilize Y amaha’ s original DSP technology (CINEMA DSP 3D).
PLAYBACK ➤ Selecting the sound mode En 54 ❑ ENTERT AINMENT ■ Sound progr ams suitable for music/st e r e o pla yback (MUSIC) The following sound programs are optimi zed for listening to music sources. Y ou can also selec t ster eo playback. ❑ CLASSICAL ❑ LIVE/CLUB ❑ STEREO • CINEMA DSP 3D (p.
PLAYBACK ➤ Selecting the sound mode En 55 ■ Enjoying sound field effec t s without surround speak ers (V ir tual CINEMA DSP) If you select one of the sound programs (except 2ch Stereo and 7ch Ster.
PLAYBACK ➤ Selecting the sound mode En 56 Enjoying unp roc essed playback Y ou can pla y back input sources without any sound field effect processing.
PLAYBACK ➤ Selecting the sound mode En 57 Enjoying pure high fidelity sound (Pur e Direc t ) When the Pure Direct mode is enabled, the unit plays back the selected source with the least circuitry in order to reduce the electrical noise from other circui try (such as the front display).
PLAYBACK ➤ Listening to FM/AM radio En 58 Y ou can tune in to a radio station by specifying its frequency or selecting from register e d radio stations. • The radio frequencies differ depending on the country or region where the unit is being used.
PLAYBACK ➤ Listening to FM/AM radio En 59 Registering fav orite radio stations (presets) Y ou can register up to 40 radio st ations as presets. Once you have registered stations, you can easily tune into them by selecting their preset numbers.
PLAYBACK ➤ Listening to FM/AM radio En 60 Radio Da ta Sy stem tuning (U.K. and Europe models only) Radio Data System is a data transmission system used by FM stations in many countries.
PLAYBACK ➤ Listening to FM/AM radio En 61 Operat ing the radio on the TV Y ou can view the radio infor mation or select a radio station on the TV . 1 Press TUNER to select “TUNER” as the input sour ce . The pla yback screen is displa yed on the TV .
PLAYBACK ➤ Listening to FM/AM radio En 62 ■ Browse scr een 1 Preset station list Displays the list of preset stations. Use the cursor keys to select a preset station and press ENTER to tune into it. 2 Preset number 3 Operation menu Press the cursor key ( r ) and the n use the cursor keys ( q / w ) to select an item.
PLAYBACK ➤ Playing back iPod music En 63 Y ou can play back iP od music on the unit using a USB cable supplied with the iPod. • For details on pla yable iP od devices, see “Suppor ted de vices and file f or mats” (p.131). C onnecti ng an iP od Connect your iPod to the unit with the USB cable supplied with the iPod.
PLAYBACK ➤ Playing back iPod music En 64 ■ Browse scr een 1 Status in dicators Display the current sh uffle/r epeat se ttings (p.65) and playback stat us (such as play/pause). 2 List name 3 Cont ents list Displays the list of iPod content. Use the cursor keys to select an item and press ENTER to confirm the selection.
PLAYBACK ➤ Playing back iPod music En 65 ■ Op er ating the iP od itself or remote con trol (simple play) 1 Press MODE to switch to the simple play mod e . The TV menu screen turns off and iP od operations are enabled . T o displa y the TV menu sc reen, press MO DE again.
PLAYBACK ➤ Playing back music stored on a USB storage device En 66 Y ou can play back music files stored on a USB storage device on the unit. The unit supports USB mass storage class de vices (F A T16 or F A T32 format). • For details on pla yable file formats, see “Supported devices and file formats” (p.
PLAYBACK ➤ Playing back music stored on a USB storage device En 67 2 Use the cursor keys to select an item and press ENTER. If a song is selecte d, pla yback starts and the playbac k screen is displa yed. • T o retur n to the pre vious screen, press RETURN.
PLAYBACK ➤ Playing back music stored on a USB storage device En 68 ■ Playback screen 1 Status in dicators Display the current sh uffle/r epeat se ttings (p.68) and playback stat us (such as play/pause). 2 Playback information Displays the artist name, album name, song title, and elapsed time.
PLAYBACK ➤ Playing back music stored on media servers (PCs/NAS) En 69 Y ou can p lay back music files stor ed on y our PC or DLNA-compa tible NAS on the unit. • T o use this function, the unit and your PC must be connected to the same router (p.30).
PLAYBACK ➤ Playing back music stored on media servers (PCs/NAS) En 70 Playback of PC music c ontents Follow the procedure below to operate the PC music contents and start playback. Y ou can control the PC/NAS with the men u displayed on the TV screen.
PLAYBACK ➤ Playing back music stored on media servers (PCs/NAS) En 71 ■ Browse scr een 1 Status in dicators Display the current sh uffle/r epeat se ttings (p.72) and playback stat us (such as play/pause). 2 List name 3 Cont ents list Displays the list of PC content.
PLAYBACK ➤ Playing back music stored on media servers (PCs/NAS) En 72 ■ Shuffle/repeat settings Y ou can config ur e the shuffle/repeat settings for the playback of PC music content. 1 When “SER VER” is selected as the input source, press OPTION.
PLAYBACK ➤ Listening to Internet radio En 73 Y ou can listen to Inter net radio stations from all over the world. • T o use this function, the unit must be connected to the Internet (p.30). Y ou can check whether the network parameters (such as the IP address) are properly assigned to the unit in “Network” (p.
PLAYBACK ➤ Listening to Internet radio En 74 ■ Browse scr een 1 Playbac k indicator 2 List name 3 Cont ents list Displays the list of Internet radio cont ent.
PLAYBACK ➤ Listening to Internet radio En 75 Registering fav orite Internet radio sta tions (b ookmarks) By registering your favorite Internet radio stations to “Bookmarks”, you can quickly access to them from the “Bookmarks” folder in the browse scr een.
PLAYBACK ➤ Playing back music with AirPlay En 76 The AirPlay function allows you to play back iT unes/iPod music on the unit via network. • T o use this function, the unit and your PC or iPod must be connected to the same router .
PLAYBACK ➤ Playing back music with AirPlay En 77 • Y ou can turn on the unit automatically when star ting pla yback on iT unes or iP od by setting “Network Standby” (p.108) in the “Setup” menu to “On”. • Y ou can edit the network name (the unit’s name on the network) display ed on iT unes/iPod in “Network Name” (p .
PLAYBACK ➤ Playing bac k m usic in multiple rooms (multi-zone) En 78 The multi-zone functio n allows you to play back dif ferent input sour ces in the room where the unit is installed (Main zone) and in another room (Zone2).
PLAYBACK ➤ Playing bac k m usic in multiple rooms (multi-zone) En 79 ■ Using the unit’ s internal amplifier Connect the speakers placed in Zone2 to the unit with spea ker cables. T o utilize the EXTRA SP ter minals for Zone2 speakers, set “Power Amp Assign” (p.
PLAYBACK ➤ Playing bac k m usic in multiple rooms (multi-zone) En 80 ■ Operating the unit fr om Zone2 (remote c onnec tion) Y ou can op erate the unit or external devices from Zone2 using the remote contr ol supplied with each device if you connect an infrared signal receiver/ emitter to the unit’ s REMOTE IN/OUT jacks.
PLAYBACK ➤ Playing bac k m usic in multiple rooms (multi-zone) En 81 Co nt ro ll in g Zon e 2 1 Set MAIN/ZONE2 to “ZONE2”. 2 Press z (receiv er po wer). Each time y ou press the key , Zone2 output is enabl ed or disabl ed. When Zone2 output is enab led, “ZONE2” lights up in the front displa y .
PLAYBACK ➤ Playing bac k m usic in multiple rooms (multi-zone) En 82 ■ Enjoying the same source in multiple rooms (party mode) (RX-V777 only) The party mode allows you to play back in Zone2 the same music that is being played back in the main zone.
PLAYBACK ➤ Controlling the unit from a web brows er (web control) En 83 Y ou can cont r o l the unit with the web control screen displayed in a web browser . • T o use this functio n, the unit and your PC m ust be connected to the same router. • Some security software installed on your PC may bloc k the access o f the unit to y our PC.
PLAYBACK ➤ Controlling the unit from a web brows er (web control) En 84 ■ T op menu screen 1 CONTROL Moves to the contr ol screen for the selected zone. 2 ST A TUS T urns on/off the power for each zone or displays the input sour ce and volume set for each zone.
PLAYBACK ➤ Controlling the unit from a web brows er (web control) En 85 ■ S ettings screen 1 Rename Edits the network name (the unit’ s name on the network) (p.109) or the name of each zone (p.109). Click “APPL Y” to apply the changes to the unit.
PLAYBACK ➤ Viewing the current status En 86 Sw itching informa tion on the fron t disp lay 1 Press INFO. Each time y ou press the key , the display ed item changes. About 3 seconds later , the corresponding info rmation for the displa yed item appears .
PLAYBACK ➤ Configuring playback settings for di fferent p layback sources (Option menu) En 87 Y ou can conf igure separate playback settin gs for differ ent playback sources. This menu is available on the front panel (or on the TV screen), allowing you to easily configure settings during playback.
PLAYBACK ➤ Configuring playback settings for di fferent p layback sources (Option menu) En 88 ■ T o ne Cont ro l ( T o ne Con tro l) Adjusts the high-frequency range (T reble) and low-frequency range (Bass) of sounds. Choices T reble (T reble), Bass (Bass) Setting range -6.
PLAYBACK ➤ Configuring playback settings for di fferent p layback sources (Option menu) En 89 Setting range 0 to 5 (The bigger the value the higher the posit ion) ■ Subwoofer/Bass (Sub woofer/Bass) Adjust the subwoofer volume or bass sound. Fine-adjusts the subwoofer volume.
CONFIGURATIONS ➤ Configuring input sources ( Input menu) En 90 C ONFIGUR A TIONS Y ou can chan ge the input source settings using the TV screen. 1 Press ON SCREEN. 2 Use the cursor keys to select “Input” and press ENTER. 3 Use the cursor keys ( e / r ) to select an input sour ce to be configured and press the cursor key ( q ).
CONFIGURATIONS ➤ Configuring input sources ( Input menu) En 91 ■ Rename/Icon Selec t Changes the input source name and icon displayed on the front display or TV screen. Input sources HDMI 1–5, V -AUX, A V 1–6, AUDIO 1–2, USB, PHONO* * RX-V777 only (except f or U.
CONFIGURATIONS ➤ Configuring the SCENE function (Scene menu) En 92 ■ V olume Interlock Enables/disables volume controls from iT unes/iPod via AirPlay. Input sources AirPlay Settings ■ DMC Control Selects whether to allow DLNA-compatible Dig ital Media Controller (DMC) to contr ol playbac k.
CONFIGURATIONS ➤ Configuring the SCENE function (Scene menu) En 93 4 Use the cursor keys ( q / w ) to select an item and press ENTER. 5 Use the cursor keys and ENTER to change the setting.
CONFIGURATIONS ➤ Configu ring sound programs/surroun d decoders (Sound Program menu) En 94 ■ Rename/Icon Selec t Changes the scene name and icon displayed on the front display or TV screen. ■ Setup procedure 1 Use the cursor keys ( e / r ) to select an ico n and pres s the cur sor key ( w ).
CONFIGURATIONS ➤ Configu ring sound programs/surroun d decoders (Sound Program menu) En 95 4 Use the cursor keys ( q / w ) to select an item and press ENTER. • T o retur n to the previous screen during menu operations, press RETURN. • T o restore the de f ault settings for the selected sound program, select “Reset”.
CONFIGURATIONS ➤ Configu ring sound programs/surroun d decoders (Sound Program menu) En 96 The following items are available when you select “2ch Stereo” or “7ch Stereo”. • Av ailable items in “7ch Stereo” vary depending on the speak er system being used.
CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 97 Y ou can config ur e the unit’ s vario us function with the menu displayed on the TV screen. 1 Press ON SCREEN. 2 Use the cursor keys to select “Setup” and press ENTER. 3 Use the cursor keys ( e / r ) to se lect a menu.
CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 98 Setu p me nu item s Menu Item Function Pag e Speaker Auto Setup Automatically optimizes the speaker settings (YP A O). 34 Manual Setup P ower Amp Assign Selects a speaker system. 100 Configuration Front Selects the size of the front speakers.
CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 99 Netw ork Network Connection Selects the network connect ion method. 107 IP Address Configur es the network parameters (such as IP address). 107 Network Standb y Selects whether to enabl e/disable the function that turns on the unit fr om other network devices.
CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 100 Speaker (Manual Setup) Configures the speaker settings manually . • Default settings are underlined.
CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 101 Selects whether or not surround back speakers are connected and their sizes. Settings • This setting is not available in the f o.
CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 102 ■ Distance Sets the distance between each speaker and list ening position so that sounds from the speakers reach the listening position at the same time. First, select the unit of distance fr om “Met er” or “F eet”.
CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 103 ■ Te s t To n e Enables/disables the test tone output. T est tone output helps you to adjust the speaker balance or equalizer while confir ming its effect. Settings Sound Configures the audio output settings.
CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 104 Adjusts the delay between video and aud io output manually when “Auto/Manual Select” is set to “Manual”. Y ou can fine-adjust the audio output timing when “Auto/Manual Select” is set to “Auto”.
CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 105 Vi de o Configures the video output settings. ■ Video Mode Enables/disables the video signal pro cessing (resolution and aspect ratio).
CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 106 HDMI Configures the HDMI settings. ■ HDMI Control Enables/disables HDMI Control (p.134). Settings • T o use HDMI control, you need to perform the HDMI Control link setup (p.134) after connecting HDMI Control-compatible devices .
CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 107 ■ Au di o O ut put Selects a device to output audio. • This setting (except f or “HDMI OUT2” [RX-V777 only]) is availab le only when “HDMI Control” is set to “Off”. Enables/disables the audio output from the speakers connected to the unit.
CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 108 ■ Manual network settings 1 Set “DHCP” to “Off” . 2 Use the cursor keys ( q / w ) to select a par ameter type and press ENTER. 3 Use the cursor keys ( e / r ) to move the edit po sition and the cursor keys ( q / w ) to select a value .
CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 109 ■ Network Name Edits the network name (the unit’ s name on the network) displayed on other network devices. ■ Procedure 1 Press ENTER to enter the n ame edit screen. 2 Use the cursor keys and ENTER to rena me and select “ENTER” to confirm the entry .
CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 110 ■ Zone2 Set Configures the Zone2 settings. Sets the Zone2 maximum volume to prevent excessive loudness. Setting range -30.0 dB to + 15.0 dB (5.0 dB incr ements), +16.5 dB • This setting is availab le only when “P ower Amp Assign” (p.
CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 111 ■ T rigger Output Sets the TRIGGER OUT jack to function in sy nc with the power status of each zone or input switching. Specifies the condition for the TRIGGER OUT jack to function.
CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 112 ■ Memor y Guard Prevents accidental changes to the settings. Settings • When “Memory Guard” is se t to “On”, the loc k icon ( o ) is display ed on the menu screen. EC O Configures the power supply settings.
CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 113 ■ ECO Mode Enables/disables the eco (power saving) mode. When the eco mode is enabled , you can r educe the unit’ s power consumption. Settings • The new setting will take eff ect after the unit is resta rted.
CONFIGURATIONS ➤ Viewing information about th e unit (Information menu) En 114 Y ou can view information about the unit using the TV screen. 1 Press ON SCREEN. 2 Use the cursor keys to select “Information” and press ENTER . 3 Use the cursor keys ( e / r ) to se lect an information type.
CONFIGURATIONS ➤ Viewing information about th e unit (Information menu) En 115 ■ Ne twork Displays the network information on the unit. (When using wired o r wireless [Wi-Fi] network connection) (When using Wireless Direct) ■ Syste m Displays the system informatio n on the unit.
CONFIGURATIONS ➤ Configuring the system sett ings (ADVANCED S ETUP menu) En 116 Configure the system settings of the unit while viewing the front display . 1 Set the unit to standby mode. 2 While holding down STRAIGHT on the fr ont panel, press MAIN ZONE z .
CONFIGURATIONS ➤ Configuring the system sett ings (ADVANCED S ETUP menu) En 117 Changing the FM/AM tuning frequenc y setting (TU) (Asia and General models only) Change the FM/AM tuning frequency setting of the unit depending on your c ountry or region.
CONFIGURATIONS ➤ Configuring the system sett ings (ADVANCED S ETUP menu) En 118 Updating the firm war e (UPD A TE) New firmware that provides additional f eatures or product improvements will be released as needed. Updates can be downloaded fr om the Y amaha website.
CONFIGURATIONS ➤ Updating the unit’s firmware via the network En 119 New firmware that provides a dditional features or product improvements will be released as needed. If the unit is connected to the Internet, you can download the firmware via the network and update it.
APPENDIX ➤ Frequentl y asked questions En 120 APPENDIX The new spea ker sy stem does not provide an ideal sound balance ... If you have changed sp eakers or have a new speaker system, use “Auto Setup” to optimize the speaker settings again ( p.34).
APPENDIX ➤ Troubleshooting En 121 Refer to the table below when the unit doe s not function properly . If the problem you are experiencing is not listed below or if the instructions below do not help, tur n off the unit, disconnect the power cable, and contact the nearest authorized Y amaha de aler or service center .
APPENDIX ➤ Troubleshooting En 122 Aud io The unit cannot be controlled using the remote control. The unit is out of the operating range. Use the remote control within th e operat ing range (p.5). The batteries are weak. Replace with new batteries. The unit’ s remote contr ol sensor is exposed to direct sunlight or strong l ighting.
APPENDIX ➤ Troubleshooting En 123 No sound is coming from the subwoofer . The playback sourc e doe s not con tain LFE or l ow-frequen cy signals. T o check if the subwoofer is working prop erly , use “T est T one” in the “Setup” menu (p.103).
APPENDIX ➤ Troubleshooting En 124 Vi de o FM/AM r adio Proble m Cause Remedy No video. Another input sour ce is selected on the unit. Select an appropriate inpu t source with the input select ion keys. Another input sour ce is selected on the TV . Switch the TV input to display the video from t he unit.
APPENDIX ➤ Troubleshooting En 125 USB and netw ork Proble m Cause Remedy The unit does not detect the USB device. The USB device is not connected to the USB jack secur ely . T urn of f t he unit, recon nect your USB device, and turn the unit on aga in.
APPENDIX ➤ Troubleshooting En 126 The application for smartpho ne/tablet “A V CONTROLLER” does not detect the unit. The unit and smartphone/t ablet are not in the same network. Check the network c onnections and your r outer settings, and then co nnect the unit and smartphone/tablet to the same network.
APPENDIX ➤ Error indications on the front display En 127 Error indications on the front displa y Message Cause Remedy Access denied Access to the PC is denied. Configure the sharing se ttings and select the unit as a device to which music co ntents are shared (p.
APPENDIX ➤ Ideal speaker layout En 128 Use this diagram as a guide. Y ou do not need to adjust the speaker layout to the following diagram exactly . Ideal speaker la yout 12 3 45 6 7 99 ER 0.3 m (1 ft ) or more 0.5 to 1 m (1.6 to 3.3 ft ) 1.8 m (5.9 ft) 0.
APPENDIX ➤ Glossary En 129 Aud io i nfor mati on ■ Audio decoding format Dolb y Digital Dolby Digital is a compressed digital audio format developed by Dolby Laboratories, Inc. that supp orts 5.1-channel audio. This technology is used for audio on most DVD disc s.
APPENDIX ➤ Glossary En 130 Sampling frequency/Quantization bit Sampling frequency and quantization bits indicate the quantity of inform ation when an analog audio signal is digitized. These values are noted as in the following example: “48 kHz/24-bit”.
APPENDIX ➤ Supported devices and file formats En 131 Ya m a h a t e c h n o l o g i e s CINEMA DSP (Digital Sound Field Processor) Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is best experienced in a theater that has many speakers designed for acoustic effects.
APPENDIX ➤ Supported devices and file formats En 132 ■ F ile formats ❑ USB • Th e unit supports WA V (PCM for mat only), MP3, WMA, MPEG-4 AAC, FLAC and ALAC (Apple Lossless Audio Codec) files (1- or 2-chan nel audio only).
APPENDIX ➤ Supported devices and file formats En 133 Vi de o s i gn a l f l ow Video signals input from a video device to the unit are output to a TV as shown below . ■ Video c onv ersion table • Y ou can select the resolution and the aspect ratio applied to HDMI-output video processing in “Video Mode” (p .
APPENDIX ➤ Information on HDMI En 134 HDMI C ontrol HDMI Control allows you to operate exter nal devices via HDMI. If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit (such as power and volume) with TV remote control operations.
APPENDIX ➤ Information on HDMI En 135 d Use the curs or ke ys ( e / r ) to select “HDMI”. e Use the curs or ke ys ( q / w ) to select “HD MI Control” and press ENT ER. f Use the cursor k eys to select “On”. g Press ON SCREEN . 3 Enable HDMI Control on the TV and pla y bac k devices (such as HDMI Control-compatible BD/D VD play ers).
APPENDIX ➤ Information on HDMI En 136 HDMI signal c ompatibility Au dio sign als Video signals The unit is compatible with the video signals of the following r esolutions: • When CPPM copy-protected D VD-A udio is play ed back, video/audio signals may not be output, depending on the type of the D VD player .
APPENDIX ➤ Trademarks En 137 Manufactured under license from Dolby Laboratories. Dolby , Pro Logic, Surround EX and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,92 9; 7,392,195; 7,272,567 & other U.
APPENDIX ➤ Specifications En 138 Input jacks • Analog Audio [RX-V7 77] [U.S.A. and Canada models] Audio x 4 (A V 5–6, AUDIO 1–2) [Other models] Audio x 5 (A V 5–6, AUDIO 1–2, PHONO) [RX-V6.
APPENDIX ➤ Specifications En 139 MHL • Video Format (Repeater Mode) -V G A - 480i/60 Hz - 576i/50 Hz - 480p/60 Hz - 576p/50 Hz - 720p/60 Hz, 50 Hz - 1080i/60 Hz, 50 Hz - 1080p/30 Hz, 25 Hz, 24 Hz • A udio Form at - PCM 2-ch to 8-ch (Max. 192 kHz/24-bit) • Current Supply Capacity: 1.
APPENDIX ➤ Specifications En 140 • Inpu t Sensitivity / Input Impedance [RX-V7 77] PHONO (1 kHz, 100 W/8 ) [Except fo r U.S.A. and Canada m odels] .......... ... 3.5 mV/47 k A V 5 etc. (1 kHz, 100 W/8 ) .. ..................... .......
APPENDIX ➤ Specifications En 141 AM section • T uning Range [U.S.A. and Canada models] ............... ... 530 kHz to 1710 kHz [Asia and Gener al models]...... 530/531 kHz to 1710/1611 kHz [Other models]............ ............. ............. ...
APPENDIX ➤ Index En 142 Symbols Exclamation mark (!) 115 , 119 Lock icon ( o ) 112 Numerics 16:9 Normal (Aspect, Setup menu) 105 2.1-channel system 18 2ch Stereo (sound program) 54 3.1-channel system 18 4.1-channel system 17 4K Ultra HD 136 5.1-channel system 17 5ch BI-AMP (Power Amp Assign, Setup menu) 100 6.
APPENDIX ➤ Index En 143 Dolby Pro Logic II (surround d ecoder) 56 Dolby Pro Logic IIx (surround decoder) 56 Dolby Pro Logic IIx Movie (Extended Surround) 104 Dolby Pro Logic IIx Music (Extended Surr.
APPENDIX ➤ Index En 144 MHL-compatible mobile device 29 MON.CHK (ADVANCED SETUP men u) 117 Monaural Mix (Sound Program menu) 96 Monaural reception (FM radio) 58 Monitor check 117 Mono Movie (sound p.
APPENDIX ➤ Index En 145 Sound Program menu 94 SP IMP. (ADVANCED SETUP menu) 116 Speaker (Setup menu) 100 Speaker impedance 15 Speaker Impedance (System, Information menu) 115 Speaker impedance setti.
© 2014 Yamaha Corporation YG105B0/EN.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Yamaha RX-V677 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Yamaha RX-V677 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Yamaha RX-V677 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Yamaha RX-V677 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Yamaha RX-V677, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Yamaha RX-V677.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Yamaha RX-V677. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Yamaha RX-V677 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.