Manuale d’uso / di manutenzione del prodotto RS2 del fabbricante Yale
Vai alla pagina of 18
13 P ART NUMBERS FOR P ACKAGED LUBRICANTS USED IN THE RS2 LEVER HOISTS (REFER TO P AGE 6 FOR LUBRICA TION INSTRUCTIONS) LUBRICANT TYPE OF P ART NUMBERS AND USAGE LUBRICANT P ACKAGED QUANTITIES OF LUBRICANTS 3 T ON LOWER SHEA VE BEARING GREASE-GRAPHITE 40626 (1 LB.
i 1 1 12 Load Limiter (Optional) W ARNING USING “COMMERCIAL” OR OTHER MANUF ACTURER’S P ARTS TO REP AIR THE RS2 LEVER HOIST MA Y CAUSE LOAD LOSS. TO A VOID INJURY : USE ONL Y Y ALE SUPPLIED REPLACEMENT P ARTS. P ARTS MA Y LOOK ALIKE BUT Y ALE P ARTS ARE MADE OF SPECIFIC MA TERIALS OR PROCESSED TO ACHIEVE SPECIFIC PROPERTIES.
ii SAFETY PRECAUTIONS Each Y ale RS2 Manually Lever Operated Hoist is built in accordance with the specifications contained herein and at the time of manufacture complies with our interpretation of applicable sections of *ASME B30.21, *ANSI/ASME HST - 3M and the Occupational Safety and Health Act-1970.
iii 1 CHOOSE THE RIGHT HOIST FOR THE JOB... Choose a Y ale Lever Hoist with a capacity f or the job. Know the capacities of your hoists and the weight of your loads.
SPECIFICA TIONS The Y ale RS2 Lever Hoist is a highly versatile manually lever operated chain hoist that can be used to efficiently pull, lift, drag or stretch. S tandard features of the hoist include: • Alloy steel liftwheel to reduce chain wear . • Hoistaloy ® load chain for long and dependable service.
2 Regardless of how the hoist is used, make sure that the upper hook is firmly attached to a support or anchor that has sufficient strength to hold several times the rated load of the hoist.
3 4. Pull on hook side and loose end side of load chain to make sure chain feeds freely into and out of the hoist. 5. Grasp unit by frame or upper hook and pull on end ring or lower hook to pull the chain through hoist to the length required to attach lower hook to load.
4 load the unit, then check to be sure that the attachments to the hooks and load are firmly seated. Continue movement only after you are assured the load is free of all obstructions. The hoist has been designed for hand powered operation only . Do not use an extension on the lever .
5 Inspection of hoists is divided into two general classifications designated as “frequent” and “periodic”. Frequent Inspections These inspections are by the operator or other designated personnel. Frequent inspections are to be performed daily or prior to each use and they are to include the following: A.
6 Also check chain for stretch using a vernier caliper as shown above. Select an unused, unstretched section of chain (usually at the loose end) and measure and record the length over 1 1 chain links (pitches). Measure and record the same length on a worn section of chain.
When lubricating parts adjacent to the brake, DO NOT use an excessive amount of lubricant which could seep onto the brake surfaces. EXTERIOR FINISH The exterior surface of the RS2 Lever Hoist has a durable, scratch resistant baked powder coating. Normally , the exterior surfaces can be cleaned by wiping with a cloth.
8 J. Assemble pawls (673-19) to pawl shaft s (673-22) and secure with snap rings (673-32). Place pawl springs (673-21) on pawl shaft s and insert these assemblies into frame (673-2). K. Slide friction hub (673-12) onto pinion (673-9) and place one friction disc (673-13) on top of friction hub.
screw . If screw has been removed and replaced, always use new spots for locking. On the 3 ton unit, hang it in the vertical position. Making sure there are no twists in the chain, feed the end of chain thru the hook block (673-71) and around lower sheave (637-70).
KEY NO. P ART NAME P ART NUMBER NO. REQ’D. 3/4 TON 1 1/2 TON 3 TON 673-1 1 Liftwheel Bearing 88645 88442 673-2 1 Frame (includes 673-3 and (4) 673-4) 73304Y 73331Y 673-3 1 Pinion Bearing, frame end .
i 1 1 12 Load Limiter (Optional) W ARNING USING “COMMERCIAL” OR OTHER MANUF ACTURER’S P ARTS TO REP AIR THE RS2 LEVER HOIST MA Y CAUSE LOAD LOSS. TO A VOID INJURY : USE ONL Y Y ALE SUPPLIED REPLACEMENT P ARTS. P ARTS MA Y LOOK ALIKE BUT Y ALE P ARTS ARE MADE OF SPECIFIC MA TERIALS OR PROCESSED TO ACHIEVE SPECIFIC PROPERTIES.
i 1 1 12 Load Limiter (Optional) W ARNING USING “COMMERCIAL” OR OTHER MANUF ACTURER’S P ARTS TO REP AIR THE RS2 LEVER HOIST MA Y CAUSE LOAD LOSS. TO A VOID INJURY : USE ONL Y Y ALE SUPPLIED REPLACEMENT P ARTS. P ARTS MA Y LOOK ALIKE BUT Y ALE P ARTS ARE MADE OF SPECIFIC MA TERIALS OR PROCESSED TO ACHIEVE SPECIFIC PROPERTIES.
13 P ART NUMBERS FOR P ACKAGED LUBRICANTS USED IN THE RS2 LEVER HOISTS (REFER TO P AGE 6 FOR LUBRICA TION INSTRUCTIONS) LUBRICANT TYPE OF P ART NUMBERS AND USAGE LUBRICANT P ACKAGED QUANTITIES OF LUBRICANTS 3 T ON LOWER SHEA VE BEARING GREASE-GRAPHITE 40626 (1 LB.
13 P ART NUMBERS FOR P ACKAGED LUBRICANTS USED IN THE RS2 LEVER HOISTS (REFER TO P AGE 6 FOR LUBRICA TION INSTRUCTIONS) LUBRICANT TYPE OF P ART NUMBERS AND USAGE LUBRICANT P ACKAGED QUANTITIES OF LUBRICANTS 3 T ON LOWER SHEA VE BEARING GREASE-GRAPHITE 40626 (1 LB.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Yale RS2 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Yale RS2 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Yale RS2 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Yale RS2 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Yale RS2, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Yale RS2.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Yale RS2. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Yale RS2 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
