Manuale d’uso / di manutenzione del prodotto VZ-17RTV del fabbricante ViewZ
Vai alla pagina of 52
17/19-INCH VALUE TTF -LCD MONITOR INSTRUCT ION MANUA L Please read this manual thoroughly before use, a nd keep it handy for future re ference..
.
SAFETY INSTRUCTION ………………………………………………………………… .. 2 ~ 3 CAUTIONS ……………………………………………………………… .......................... 4 FCC RF INTERFERENCE STATEMENT …………………………… .
Important Safet y Instruction 1. Read these instru ctions. 2. Keep these Instru ctions. 3. Heed all w arnings. 4. Follow al l instructions. 5. Do not use this appa ratus near w ater . 6. Clean only with dry cloth. 7. Do not block any ventilation open ings.
- The apparatus sha ll not be expo sed to drippi ng or splashing and tha t no objects filled with liquids, such as vases, shall be place d no the apparatus .
CAUTION The power supply cord is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is easily accessible.
NOTE This e quipment has been tested and f ound to comp ly with the limits for a Class A d igital device, pursuant to Part 15 of the FCC Rules. These limits are designed to prov ide reasonable protection against harmful interference in a residential installation.
A. BOTTOM P A NEL CONTR OL 1. DC 12V IN 2. HDMI IN 3. VGA(D-SUB) IN 4. VIDEO1(AV1) IN 5. VIDEO1(AV1) OUT 6. VIDEO2(AV2) IN 7. VIDEO2(AV2) OUT 8 , 9. AUDIO IN(R+L) for AV1, AV2 10 . PC STEREO IN 11 . TRIGGER INPUT 6 …………………………………………………………………… .
B. REMOTE CONT ROLLER (Option) 1. POWER( ) Turn the power ON or O FF. T here will be a few seconds delay before the displa y appears. 2. SOURCE Select pc or video( AV1/AV2/HDMI /PC) sourc es. 3. AUT O Auto geom etry adjustment in PC Sourc e. 4. HOLD Stop the Trigger & Au to switching functions.
C . FRONT KEY CONTR OL 1. SOURCE/ Select input source, and move the previous menu. 2. MENU Activates and exits the On Screen Display . This button can also be used to move previous menu or status. 3, 4. AUTO/ ▼, ▲ These buttons allow user to move the sub-menu of the a ctiv ated function.
OSD MENU DESC RIPTION A : Custo m Menu (Only Video Input) 1) Press the M ENU button and then press the up( ▲ ) or dow n( ▼ ) button to select the Custom. 2) Press the up ( ▲ ) or dow n( ▼ ) button to select th e sub menu. 3) Press the left( ◀ ) or right( ▶ ) bu tton to ad just the picture setting.
A : Custo m Menu (For RGB-PC & HD M I Input) 1) Press the M ENU button and then press the up( ▲ ) or dow n( ▼ ) button to select the Custom. 2) Press the up ( ▲ ) or dow n( ▼ ) button to select th e sub menu. 3) Press the left( ◀ ) or right( ▶ ) bu tton to ad just the picture setting.
B. Picture / Sound Menu (Only Vi deo Input) 1 . Picture Mode 1) Press the M ENU button and then press the up( ▲ ) or down( ▼ ) button to select the Picture / Sound. 2) Press the right( ▶ ) or S OURCE/ button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Picture M ode.
2-1. Color Tone 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Color Tone. 2) Press the righ t( ▶ ) or SOURCE / button. 3) Press the righ t( ▶ ) or SOURCE / button again. 4) Press the up( ▲ ) o r dow n( ▼ ) button to select th e Color Tone option.
2-2 . Color Tone (User) 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e User. 2) Press the M ENU button. 3) Press the up( ▲ ) o r dow n( ▼ ) button to select th e User option. 4) Press the left( ◀ ) or right( ▶ ) bu tton to ad just the Red, G reen or Blue settin g.
3 . Mute 1) Press the up( ▲ ) or dow n( ▼ ) button to select the M ute. 2) Press the righ t( ▶ ) o r SOURCE/ button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e On or Off. 4) Press the M ENU button to save. 14 …………………………………………………………………… .
4 . Volume 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Volume 2) Press the le ft ( ◀ ) or right( ▶ ) bu tton to adjust V olume settin g. 3) Press the M ENU button to save. INSTRUCTION MANUAL …………………………………………………………………… .
5. Size 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Size 2) Press the righ t( ▶ ) or SOURCE / button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Size option. 4) Press the M ENU button to save. 16 …………………………………………………………………… .
6. NR (Noise Reduction) 1) Press the up ( ▲ ) or dow n( ▼ ) button to select the NR . 2) Press the righ t( ▶ ) or SOURCE / button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e On or Off. 4) Press the M ENU button to save. INSTRUCTION MANUAL …………………………………………………………………… .
7. 3D Comb 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e 3D Comb. 2) Press the righ t( ▶ ) or SOURCE / button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e On or Off. 4) Press the M ENU button to save. 18 …………………………………………………………………… .
B. Picture / Soun d Menu (For RGB- PC & HDMI Input) 1 . Size 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Size. 2) Press the righ t( ▶ ) or SOURCE / button. 3) Press the up ( ▲ ) or down( ▼ ) button to selec t the Size opti on.
2 . PC (Only RGB- PC Inpu t ) 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e PC. 2) Press the righ t( ▶ ) or SOURCE / button. 3) Press the up ( ▲ ) or down( ▼ ) button to selec t the PC sub menu . 4) Press the right( ▶ ) or S OURCE/ button.
C. PIP Menu 1) Press the M ENU button and then press the up( ▲ ) or down( ▼ ) button to select the PIP. 1. PIP 1) Press the right( ▶ ) or S OURCE/ button. 2) Press up( ▲ ) or down( ▼ ) button to select the On or Off . 3) Press the M ENU button to save.
2. Input Source 1) Press the up( ▲ ) o r dow n( ▼ ) button to select th e Input Source. 2) Press the right( ▶ ) or S OURCE/ button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Source option.
3. PIP Mode 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e PIP Mode. 2) Press the right( ▶ ) or S OURCE/ button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e PIP Mode option.
4. PIP Size 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Size. 2) Press the right( ▶ ) or S OURCE/ button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Size option. 4) Press the M ENU button to save. 24 …………………………………………………………………… .
5. Position 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Position. 2) Press the right( ▶ ) or S OURCE/ button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Position option. 4) Press the M ENU button to save. ※ RB: Right of Bottom , LB: Left of Botto m, LT: Left of T op & RT: Rig ht of Top.
6. Swap 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Swap. 2) Press the right( ▶ ) or S OURCE/ button to sw ap the main ima ge for the sub one.
7. Sound Select 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Sound Select. 2) Press the right( ▶ ) or S OURCE/ button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Sound Select option. 4) Press the M ENU button to save.
D. Setup Menu 1) Press the M ENU button and then press the up(▲) or down(▼) button to select the Setup . 1. Reset 1) Press the right( ▶ ) or S OURCE/ button 2 ) Press the right( ▶ ) or SOURCE/ button a gain. 3) Press SOURC E/ button to execute the reset.
2. Language 1) Press the up (▲) or dow n(▼) button to select th e Language. 2) Press the righ t( ▶ ) or SOURC E/ button. 3) Press the up (▲) or dow n(▼) button to select la nguage. 4) Press the M ENU button to save. INSTRUCTION MANUAL …………………………………………………………………… .
3. OSD Tone 1) Press the up (▲) or dow n(▼) button to select th e OSD T one . 2) Press the righ t( ▶ ) or SOURC E/ button 3) Press the up (▲) or dow n(▼) button to select th e OSD T one option. 4) Press the M ENU button to save. 30 …………………………………………………………………… .
4. Blue Screen 1) Press the up (▲) or dow n(▼) button to select th e Blue Screen. 2) Press the righ t( ▶ ) or SOURC E/ button. 3) Press the up (▲) or dow n(▼) button to select the On or Off. 4) Press the M ENU button to sav e. INSTRUCTION MANUAL …………………………………………………………………… .
5. Key Lock 1) Press the up (▲) or dow n(▼) button to select th e Key Lock. 2) Press the righ t( ▶ ) or SOURC E/ button 3) Press the up (▲) or dow n(▼) button to select the On or Off 4) Press the M ENU button to save. 32 …………………………………………………………………… .
6. Trigger 1) Press the up(▲ ) or dow n(▼) button to select th e Trigger. 2) Press the righ t( ▶ ) or SOURC E/ button. 6-1. Trigger Enable 1) Press the up(▲ ) or dow n(▼) button to select th e Trigger Enable. 2) Press the righ t( ▶ ) or SOURC E/ button.
6-2. Trigger Input 1) Press the up(▲ ) or dow n(▼) button to select th e Trigger Input . 2) Press the righ t( ▶ ) or SOURC E/ button. 3) Press the up(▲ ) or dow n(▼) button to select th e Trigger Input option. 4) Press the M enu button to sav e.
6-3. Buzzer 1) Press the up(▲ ) or dow n(▼) button to select th e Buzz er. 2) Press the righ t( ▶ ) or SOURC E/ button. 3) Press the up(▲ ) or dow n(▼) button to select the On or Off. 4) Press the M enu button to sav e. INSTRUCTION MANUAL …………………………………………………………………… .
6-4. Trigger Time 1) Press the up(▲ ) or dow n(▼) button to select th e Trigger Time . 2) Press left( ◀ ) or right( ▶ ) button to adjust Trigg er Time settin g. 3) Press the M ENU button to sav e. 36 …………………………………………………………………… .
6-5 Trigger Option 1) Press the up(▲ ) or dow n(▼) button to select th e Trigger Option. 2) Press the righ t( ▶ ) or SOURC E/ button. 3) Press the up(▲ ) or dow n(▼) button to sele ct the Trigger Option settin g. 4) Press the M enu button to sav e.
6-6. Display Type 1) P ress the up(▲ ) or dow n(▼) button to select th e Display Type. 2) Press the righ t( ▶ ) or SOURC E/ button. 3) Press the up(▲ ) or dow n(▼) button to select th e Display Type option. 4) Press the M enu button to sav e.
7. Auto switching 1) Press the up(▲ ) or dow n(▼) button to select th e Auto swi tching. 2) Press the righ t( ▶ ) or SOURC E/ button. 7-1. Auto switching On/Off 1) Press the righ t( ▶ ) or SOURC E/ button. 3) Press t he up(▲ ) or dow n(▼) button to select th e On or Off .
7-2. Auto switching Input enabled 1) Press the up(▲ ) or dow n(▼) button to select th e Inputs enabled . 2) Press the right( ▶ ) or SOURC E/ button. 3) Press the up(▲ ) or dow n(▼) button to select th e Input. 4) Press the righ t( ▶ ) or SOURC E/ button.
7-3. Auto switching Time 1) Press the up(▲ ) or dow n(▼) button to select th e Time . 2) Press the left( ◀ ) or right( ▶ ) button to adjust the Time setting. 3) Press the M ENU button to sav e. INSTRUCTION MANUAL …………………………………………………………………… .
Using the VESA standard wall mount design and the 100 × 100mm hole pattern on the back panel to install the LCD monitor to the wall. Wall-mount Installation(Option) 1.
▶ PIN A SSIGNMENTS Pin 1 RED VIDEO 9 2 GREEN VIDEO 10 SIGNAL CABLE DETECT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(for DDC) 5 GROUND 13 H-SYNC.(or H+V SYNC.) 6 RED GROUND 14 V-SYNC. 7 GREEN GROUND 15 SCL(for DDC) 8 BLUE GROUND ▶ ACCESSORIES 1. Power cord 2.
POWER CONSUMPTION MODE POWER CONSUMPTION 17 ” 19 ” ON < 40W < 45W POWER OFF < 1W LED INDICATOR The power management feature of the monitor is comprised of four stages: ON(GREEN) and POWER OFF(GREEN OFF ).
17 ’’ 1 9’’ LCD-Type 17 ˝ Diagonal AM-T FT(Active- Matrix) 19 ˝ Diagonal AM- TFT(Active -Matrix) Pixel pitch(mm ) : 0.264(H) x 0.2 64(V) Pixel pitch(mm ) : 0.
WEEE S ymbols 46 …………………………………………………………………… . INSTRUCTION MANUAL Correct Disposal of T his Product (Waste Electrical & Electronic Equipment) (Ap.
MEMO.
MEMO.
.
P/N : L39ME01 96 Rev.4.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il ViewZ VZ-17RTV è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del ViewZ VZ-17RTV - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso ViewZ VZ-17RTV imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul ViewZ VZ-17RTV ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il ViewZ VZ-17RTV, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del ViewZ VZ-17RTV.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il ViewZ VZ-17RTV. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo ViewZ VZ-17RTV insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
