Manuale d’uso / di manutenzione del prodotto Adora TSL WP del fabbricante V-Zug
Vai alla pagina of 64
Tumble dryer Adora TSL WP Operating instructions V-ZUG Ltd.
2 Thank you for choosing to buy one of our products. Your appliance is made to high standards and i s easy to use. Neverth eless, please take th e time to read these operating instructions in or der to familiarize yourself with the appliance and get the best use out of it.
3 Contents 1 Safety precautions 5 1.1 Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.2 Before using for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 6 Care and mainte nance 42 6.1 Cleaning intervals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 6.2 Error message A9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 6.3 Build-up of fluff .
5 1 Safety precautions In accordance with the requirements of IEC 60335-1: • This appliance is not intended for use by persons (including chi ldren) with reduced physical, sensory or mental capabili.
1 Safety precautions 6 1.2 Before using for the first time • The appliance must be installed and co nnected to the el ectricity supply in accordance with the s eparate installa tion instructions. The necessary work should be carried out by a qualified fitter or electrician.
1 Safety precautions 7 Do not use the appliance to dry the following •U n w a s h e d w a s h i n g . • Textiles that have been cleaned, treated or soaked with flammabl e chemicals, detergents o r solvents (benzine , alcohol, stain r emover, oil, paint, wax, etc).
1 Safety precautions 8 1.5 Note on use • Do not use the appliance if vi sibly damaged or if the inlet pipes a re damaged. Con tact Customer S ervices. • If the appliance is not op erating properly, disconne ct it from the electr icity supply immediate ly.
1 Safety precautions 9 1.6 Maintenance • Disconnect the appliance from the ma ins before carrying out maintenance work. • The door filter must be cleaned each time after a dryi ng programme. • Do not spray the outside or the inside of the appli a nce with water.
10 2 Your appliance 2.1 Appliance description The appliance operate s with a closed air circuit. With the help of the heat pump, the moisture is e xtracted from the air which is then heated up again. Recovering heat in this way sharpl y reduces energy consumption.
2 Your appliance 11 2.2 Construction 1 Operating and display elem ents (pivoting operating p anel) 2 Appliance door 3 Door filter 4 Cover 5 Cassette in base 6 Air grille 7 Identification plate/ serial.
2 Your appliance 12 2.3 Operating and display elements Automatic programmes Additional programme Additional functions Extra dry Normal dry Iron dry Damp Woollens WetClean Favourites Fabric type Timed drying Ultra care Easy care Delayed start End of programme MIN.
2 Your appliance 13 Display (pla in text display ) Various information appear s in the display during the programme selection and the programme seq uence: • Programme name with duration • Moisture.
2 Your appliance 14 2.4 Using for the first time When the appliance i s connected to the power suppl y for the first time , it is possible to select a function test. The pu rpose of the function test is to check the installation and it la sts about 3 minut es.
2 Your appliance 15 The function test can be interrupted in 2 ways: Continue the function test «continue»: Function test «abort»: End of function test: 1. Open th e appliance door. – I n the display app ears: – After closing the appliance door the display appears: Or 2.
2 Your appliance 16 2.5 Select language for the display After using for the first time the language must be selected once . It can be changed at any time under U SER SETTINGS . ➤ Press the button repeat edly until t he desired language appears in the display, e.
17 3 Programme overview 3.1 Programme sequence for automatic programmes The drying programme has 3 phases: Drying The washing is tum ble dried unti l it reaches the set l evel of dryness. Th e drying programme is monitored by a moisture sensor. As so on as the required level of dryness is reached, the «Cooling down/airi ng» phase starts.
3 Program me overvie w 18 3.2 Automatic programmes To select the right drying progra mme, follow the fabric care symbols on garment labels, e.g. . Programme Symbol Use Extra dry For thick, multi-layered fabrics and mixed l oads. Not suitable for knit ted or woven arti cles such as T-shirts and underwear as they could shrink.
3 Programme overview 19 The stated values f or the programme dura tion and energy apply for the maximum stated capacity with a wa sh spun at approx. 1000 rpm (corre- sponds to a residual moisture of approx. 60 %). A higher spinning speed and a smaller load reduce them by about 20–30 %.
3 Program me overvie w 20 3.3 Fabric type Use Airing For refreshing or airing little-worn garments. Silk For drying silk fabrics. Follow th e fa br ic ca r e l a b e l s a s s i l k t en d s t o c r e a s e e as i ly . L ow temperatur e for gentle drying.
3 Programme overview 21 Capacity Residual moisture Programme duration Energy 2.5 kg – 0h10 0.02 kWh 1.5 kg 0 % to 2 % 0h45 1.10 kWh 1 kg – 0h04 0.10 kWh 1 kg – 0h20 0.03 kWh 7 in total 0 % to 2 % 0h45 1.05 kWh 3 kg 0 % to 2 % 1h25 1.35 kWh 4 kg –1 % to 2 % 1h20 1.
3 Program me overvie w 22 3.4 Additional functions Function/symbol Use Max. load Ultra care Very gentle progr amme with a lower drying temper ature. Particularly suitable for fine textiles. 2.5 kg Easy care Gentle drying for mixed fabrics (e. g. shirts, pullovers , T-shirts).
3 Programme overview 23 3.5 Favourites Defining your favou rites Simplifies sele cting frequently used programmes. You can compile your own favourites. Favourites are easy to start. • A maximum of 3 favourites can be saved. The appliance door has to be open to define , change or delete a favourite.
3 Program me overvie w 24 Starting your favourite Changing your favourite ➤ Close the appliance do or. ➤ Press the button repeat edly until t he desired favourite appears i n the display, e.g.: – The programme starts automatica lly after 20 seconds.
3 Programme overview 25 Deleting a favourit e ➤ Open the applianc e door. ➤ Press the button repeatedly until the favourite to be del eted appears in the display, e.g.: ➤ Hold the button depressed for about 3s e c o n d s . Delete favourite: «YES»: ➤ Press the button.
26 4 User settings Providing no programme is running and no error message is displaye d, the user settings can be changed with the appliance door open or closed. The procedure is generally th e same for all settings. Changing user settin gs Exiting user settings ➤ Press the button repeat edly until the display goes out.
4 User settings 27 The following diagram giv es an overview of the possible user settings. ➤ Hold button depressed for 5 seconds • Text in Deutsch • Texte en français • Testo in italiano • .
4 User settings 28 4.1 Language The language in the display is se lected after using for the first time under S ELECT LANGUAGE FOR DISPLAY and can be chan ged at any time, as described in this section. Changing the language ➤ Hold the button depressed for 5 seconds.
4 User settings 29 4.2 Level of dryness The appliance is designe d to provide the most energy-efficien t drying. The moisture sensor continually monitors the level of dr yness of the washing. If the washing is not being dried sufficiently – or being overdried – the level of dryness can be reset.
4 User settings 30 4.3 Childproof lock The childproof lock is to prevent sma ll children accide ntally starting or stopping a programme. When the childproof lock is on, a programme can only be started by pressing two buttons simultaneously. Switching the childproof loc k on/off ➤ Hold the button depressed for 5 seconds.
4 User settings 31 4.4 Brightness This function can be used to change the displ ay contrast between the text and the background. Changing t he brightness in the display Levels of brightness ➤ Hold the button depressed for 5s e c o n d s . ➤ Press the button repeatedly until the actual brightness l evel appears in the display, e.
4 User settings 32 4.5 Restoring factory settings The factory settings can be restored . Any favourites that hav e been saved will be deleted. ➤ Hold the button depressed for 5 seconds. ➤ Press the repe atedly until in the display appears: ➤ Press the button.
33 5D r y i n g Preparin g the applian ce ➤ Plug the appliance in at the mains or turn the wall switch on. Loading the appliance ➤ Open the applianc e door (press the middle o f the lock side of the door at the ed ge). ➤ Loosely load wet washing items one by one.
5 Drying 34 5.1 Programme selection «Tip and go» An automatic programme can be selected with the press of a single button. All the necessary s ettings for the progra mme are made automaticall y. Additional functions can be selected or deselected by pressing the corre- sponding button.
5 Drying 35 Selecting an automatic progr amme ➤ Close the app liance door. – The indicator ligh ts for the prog ramme selection buttons and the additional programme flash. ➤ Press the required prog ramme selection button. – The indicator light for the program me selected illuminates.
5 Drying 36 Selecting timed drying ➤ Close the appliance do or. – The indicator lights for the pr ogramme selection buttons and the additional p rogramme flashes. ➤ Press the button. ➤ Press repeated ly to select desired d u ration, i.e. 10, 20, 30, 40, 50, 60 or 90 minutes.
5 Drying 37 Selectin g delayed sta rt ➤ Hold button pressed immediat ely after the programme selection, or keep pressing it until the desired delayed start duration sh ows in the display (max. 24 hours). – The display goes dark. – After the desired delayed start pe riod is up, the progra mme selected starts automatically.
5 Drying 38 5.3 Interrupting a programme A running programme can be interrupted at any time to add/remove an i tem of washing before time. ➤ Open the appliance do or. – The indicator light for the pr ogramme selected illumi nates. – The programme name and duration remaining or delayed start period flash in the display.
5 Drying 39 5.5 Programme selection with childproof lock activated ➤ Close the app liance door. ➤ Press the desired pr ogramme selection button. ➤ Hold the programme selection butto n depressed and at the same time press the button. – The indicator ligh ts for the additi onal functions flash.
5 Drying 40 Programme abort thro ugh door opening ➤ Open the appliance do or. – The running programme is interrupted. ➤ Hold the activated programme select ion button – the indicator light is illuminated – depressed and a t t he same time press the button.
5 Drying 41 5.6 End of programme «Crease guard» starts if the appliance is not unloa ded straightaway. When it has finished, the i ndicator lights and disp lay go out. Unloading t he washing ➤ Open the applianc e door. – The indicator lights and the dis play go out.
42 6 Care and maintenance 6.1 Cleaning intervals Pos. Part Cleaning intervals Cleaning 1 Door filter each time af ter a drying programme remove an y fluff whenever there is a heavier build-up of depos.
6 Care and maintenance 43 6.2 Error message A9 Check and, if neces sary, clean the following parts i n the appliance: • Door filter • Base cassette • Mesh filter in ba se • Filter mat in base mesh filter 6.
6 Care and maintenance 44 ➤ Open the appliance do or. ➤ Lift the door filter 1 out. ➤ Remove any fluff. ➤ Hold door mesh filter up to the light to detect deposits.
6 Care and maintenance 45 ➤ Open the applianc e door. ➤ Open the cover 1 by pressing the release catch 2 . ➤ Remove the cassette in base 3 . ➤ Remove fluff fro m the base mesh filter in the base cassette. ➤ Replace the cassette in base and close the cover.
6 Care and maintenance 46 6.7 Cleaning the filter mat ➤ Open the appliance do or. ➤ Open the cover 1 by pr essing the release catch 2 . ➤ Remove the cassette in base 3 . ➤ Remove the mesh f ilter in base 4 from the cassette in base. ➤ Remove the filter ma t 5 from the mesh filter in base .
6 Care and maintenance 47 ➤ Open the applianc e door and the cleaning cover. ➤ Remove the cassette in base. ➤ Clean the filter mat carefully using a vacuum cleaner with the crev ice tool attachment. ➤ Replace the cassette in base and close the cleaning cover.
48 7 Trouble-shooting This section lists problems w hich you ca n resolve simply yourself by following the instructions given. If any other error messages app ear or if you are unable to resolve the problem, call Customer Servic es.
7 Trouble-shooting 49 … appears … appears Possible cause Solution • The moisture sensor is dirty or wet. ➤ Clean the moisture sensor and then wipe dry.
7 Trouble-shooting 50 … a p p e a r s … a p p e a r s … a p p e a r s Possible cause Solution • Various situations can lead to an «F» error message. ➤ Cancel the err or message by pressing the button. ➤ Switch mains supply off for a pprox.
7 Trouble-shooting 51 … appears … it is not possible to select a new programme aft er closing the appliance door … the appliance will not start Possible cause Solution • The following parts in the appliance have no t been inserted properly: – Cassette in base – Mesh filter in ba se –F i l t e r m a t ➤ Insert parts correctly.
7 Trouble-shooting 52 … the wa shing is not dry en ough … the programme takes signif icantly longe r than indicated i n the display Possible cause Solution • The load contains different types of fabric. ➤ Select a longer p rogramme. ➤ Select the prog ramme.
7 Trouble-shooting 53 … the washing is charged with st atic electri city … the durati on remaining indicator remains frozen for a longer period Possible cause Solution • Wash items that are ma de of man-made fibres. Static charge is a normal characteristi c of man-made fibres and nothing to do with the appliance.
54 8D r y i n g t i p s 8.1 Fabric care symbols To select the right drying programme , follow the fabri c care symbols on garment labels. General tips • For the wash you are recommended not to us e fabric cond it ioners or other fabric care solutions, otherwise comp ly with the manufacturer’s instruc- tions.
8 Drying tips 55 • Woollen and silk fabrics often ca rry the «Do not tumb le dry» label. ➤ For woollen and silk fabrics, follow the fabric care symbols on garment labels. ➤ Press the button and select the relevant progr amme. • For easy-care fabrics (e .
56 9 Spare parts Please give model number and exact de scription when ordering parts. Door filter Mesh filter in ba se Filter mat in base mesh filter (2 items) Cassette in base for mesh filter in base.
57 10 Technical data Dimensions Ambient conditions Electrical conne ction ➤ See identif ication plate Height: 85 cm Width: 60 cm Depth: 60 cm Weight: 65 kg Dry load capacity: 6 kg Permissible room t.
10 Technical data 58 10.1 Notes for testing institutes ➤ The correct determination of the declaration data is given with wash item after an intake phase o f 5 complete dr ying programmes (Auto matic program me: Normal dr ying ). ➤ Wash the base mesh filter in the base cassette after every drying programme.
59 11 Disposal Packaging • All packaging materi als (cardboard, plastic film (PE) and polystyre ne (EPS)) are marked and should , if possi ble, be collected for recycling and disposed of in an environmentally friendly wa y. Disconnection • Disconnect the appliance from the mains.
60 12 Index A Additional functions . . . . . . . . . 12, 22 Additional programme. . . . . . . . . . 12 Airing. . . . . . . . . . . . . . . . . . . . 17, 20 Ambient conditions . . . . . . . . . . . . 57 Appliance Construction . . . . . . . . . . . . . .
61 12 Index F Fabric care symbols . . . . . . . . . . . 54 Fabric conditioners . . . . . . . . . . . . 54 Fabric types . . . . . . . . . . . . . . . . . . 20 Factory settings . . . . . . . . . . . . . . . 32 Favourites . . . . . . . . . . . . . . . . 18, 23 Changing .
62 12 Index T Technical data . . . . . . . . . . . . . . . . 57 Testing institutes Notes . . . . . . . . . . . . . . . . . . . . . 58 Timed drying . . . . . . . . . . . . . . . . . 18 Selecting . . . . . . . . . . . . . . . . . . . 36 Tips . . . . . .
63 13 Repair service Whether you contact us abo ut a malfunction or an orde r, please alwa ys state the serial number (FN) and the model type of your appli ance. Enter these details below and also on the s ervice sticker which comes with the ap pliance.
Quick instructions Please firs t read the sa fety preca utions in th e operatin g instructi ons! ➤ Open the appliance do or ➤ Check the door filter ➤ Load the washing ➤ Close the appliance do .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il V-Zug Adora TSL WP è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del V-Zug Adora TSL WP - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso V-Zug Adora TSL WP imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul V-Zug Adora TSL WP ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il V-Zug Adora TSL WP, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del V-Zug Adora TSL WP.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il V-Zug Adora TSL WP. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo V-Zug Adora TSL WP insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
