Manuale d’uso / di manutenzione del prodotto TV-IP100 del fabbricante TRENDnet
Vai alla pagina of 55
1.
2 T ABLE OF C ONTENTS ABOUT THIS GUIDE ................................ ..................................... 5 INTRODUCTION .......................... .................................... ............... 6 SYSTEM REQUIREMENT ................ ........
4 Play ........................................................... ................................... 62 Scan .................................... ..................................... .................... 62 Combine ...................... ..........
6 1 I NTRODUCTION Thank you for the purch ase of th e Inter net Cam era con necti ng directly to an Ethernet or Fast Eth ernet. It is different from the conven tional P C Came ra, the In te rnet Camer.
8 • Interne t Explore r 5.0 or above (ActiveX & JAVA Mode – Image View for Windo ws OS and JAVA Mode – Image View for ot her OS) • Netsc ape 6.
10 Support V ariety of Plat forms The Internet Camera suppo rts TCP/IP networking, SMTP e-mail, HTTP and other Internet related pr otocols, and can be utilized in a mix ed op eratin g sys tem envi ronm ent su ch as Wind ows , Unix, and Mac. It can be integ rated easily into other www/Intranet applications.
12 4 P HYSICAL D ESCRIPTION This section describes the extern ally visible fea tures of the Internet Came ra. Front Panel Power LED Link LED 13 Power LED The Power LED is positioned on th e right side of the In ternet Camera’s lens while facing the Internet Camera.
14 Rear Panel Network Cable Connector The Internet Camera’s rea r panel features an RJ-45 connector for connections to 10 Base-T Ethernet ca bling o r 100Base-TX Fast Ethernet cablin g (which should be Category 5 twisted-pair cable).
16 To p P a n e l Screw Hole Located on the top panel of the In ternet Camera, the screw hole is used to connect the camera stand onto the Internet Camera by attaching the screw head on the ca mera stand into the screw hole of the Internet Camera.
18 5 U NP ACKING T HE I NTERNET C AMERA Carefully remove all items from th e package. In add ition to this User’s Gui de, be certa in tha t you have : • One Internet Camera • One Utility CD-ROM .
20 6 H ARDW ARE I NST ALLA TIO N This section describes the Hardware installation procedure for the Internet Came ra. 1 Connect an Ethernet cable Connect an Ethernet cable to the netw ork cab le conn ector located on the Internet Camera’s rear panel, and then attach it to the network.
22 7 S ECURITY To en sure t he hi ghest securit y and p revent u nauth orized u sage o f the Internet Camera the Administ rator has the exclusive privilege to access the System Administration for settings and co ntrol requirements to allow users the le vel of entry and authorize the privileges for all users.
24 number is t he def ault IP addr ess of your In terne t Camera . Then, press [E nter ] . Note: The PC’ s IP addre ss must correspond wi th the Internet Came ra’ s IP add ress in the s am e segm ent fo r the t wo devices to communicate.
26 System Administration Click “System Ad minist ration” from the Welcome screen to access the settings required for the Internet Camera. There will be several options in the System menu bar to ch.
28 Camera Name: This field is used to enter a de scriptive n ame for the device. The default setting for the Camera Name is CS-xxxxxx , where xxxxxx is the last si x digit of the MAC A ddress. The maxi mum length is 32 (Printable ASCII). Location: This field is used to enter a desc riptive name for the location use d by the Internet Camera.
30 DNS IP Address: DNS (Domain Na me System) server is a n Internet service that translates domain n ames into IP addresses. Enter at least one DNS IP Addr ess.
32 192.168.0.103 192.168.0.104 192.168.0.105 You can open the second port for each Internet Camera from port 81 to Port 85 as illust rate d below: Internet Camera 1 – IP 192. 168.0.101, second web port 81 Internet Camera 2 – IP 192. 168.0.102, second web port 82 Internet Camera 3 – IP 192.
34 Frame Rate: Select the frame rate desired with default se tting at Auto for optim al frame rate. Brightness C ontrol: Adjust the brightness level with default setting at 64 . Contrast Control: Adjust the contrast level wi th default setting at 64. Saturation Control: Adjust the saturation with default setting at 64.
36 Delete Use r: Select the user you wish to d elete from the pull down menu and click the “del ete” button. 192.168.0.20 Import ant In forma tion Once the ad ministrato r has co nfigured th e Internet Ca mera Users , any user will be asked to enter a lo gin password to access the video im age from the Intern et Camera.
38 Protocol: Two options of NTP or Time a re available for your selection to link with the Time Server. The default setting is NTP. TimeZone: The system ad ministrator must sele ct the time zone for the regi on. Please refer to the appendix for the time zone selec tion table.
40 There are three options to proceed in the Upload screen, including FTP Server , Ti m e Sche du le and Manual Opera tion. FTP Server: There are six basic settings for your FTP server.
42 System Administration – E-mail The E-mail menu contains the comm ands for E-mail account, time schedule and manual operation settings. Click “E-mail” in the system administration menu bar, an.
44 System Administration - Information The Information m enu contains commands for displaying information about th e Internet Camera. Click “Informati on” in the system administration me nu bar an.
46 Once the configuration is co mpleted, click “Home” to return to the Welcome screen and select th e desired Viewing Image either through A ctiveX Mod e or Java Mode as describ ed in the n ext section. Then, position the Internet Camera to th e desired loca tion appropriately for yo ur purpose.
48 V iew Image – Java Mode Click “View Image – Java Mode” from the Welcome screen to access the video im ages from the Internet Explorer or Netscape browser as illustrated below: Camera Name* .
50 9 I NTERNET C AMERA A PPLICA TION The Inte rnet Camera can be appli ed in wi de va riety of applications. W ith the built-in CP U, it can work as a standalone system that provides a web-based solution transmitting high quality video im ages and sounds for monitoring pu rpos es.
52 Internet Camera Application Diagrams Home Applications SOHO Internet Camera SOHO Wireless Internet Camera 53 SOHO Applications SOHO.
54 10 IPV IEW SE A PPLICA TION Inst allation Insert the CD-ROM into the CD-R OM drive to initiate the auto- run pro gram. Once co mpleted, a menu screen wi ll appear as below : 55 To install the IPView SE app lication click the "IPView SE" button to activate the installation procedure for the application program.
56 The Welcome screen will appe ar as below. Click the “Next” butto n. The License Agreement window will appear as belo w. Read the details carefully and click the “Yes” button. 57 In the follow ing window, you may click “Next” to acce pt the recommended destination location or click “Br owse” to select another location.
58 Please wait until one of the following two dialog boxes to app ear. If the system has to resta rt, select “Yes, I want to restart my comput er now” a nd click the “Finish” button to comp lete the installation procedure.
60 11 G ETTING S TA R T E D This section describes the ope ratio n of t he IP View S E app licati on with detailed procedures for using the application. IPV iew SE IPView SE is respon sible for the manage ment of previe w, configuration, and sear ch ing of each cam era.
62 Minimize To minim ize the control panel. Exit To close IPView SE. Play To play back the recorded file. Scan To display for each camera one by one. Combine To combine all disp lay windows in one. About To display the in formation of IPView SE. 63 How to Add a Camera Add Camera To add a new camera, click the Add Camera butt on.
64 You must select the cam era and click th e “Add” button to add a new camera. You can select the “I nput IP” button, an Input IP dialog box will appear as illustrated below. Enter the IP Address of the camera in the specified field and click the “Add” icon to add a new camera.
66 You must select the cam era and click th e “Add” button to add a new camera. If the Login Camera dialog box appears, mak e sure to enter t he correct User Name and Password an d clic k th e “OK” button. Then, the camera will be added into IPView S E in list format.
68 Camera Conf ig Assign IP to Ca mera Connect / Disconnect Erase Extra Information Manual record Schedule record Motion record 69 How to Change Camera Assign IP of New Camera To ch ange c amera, click the “ Assign IP of Camera” button. An Assign IP of Ca mera dialog box will appear as illustrated below.
70 How to Connect / Disconnect the Image Connect the Image Click the “ Connect/Disconnect ” button and the prev iew screen will appear with the video image.
72 Disconnect the Image Click the “ Connect / Disconn ect ” button, the camera will be disco nnected . 73 How to Delete a Camera Erase Camera To delete a camera, you mu st select the camera to delete from the IPView SE control panel. Then, click the “ Erase Camera ” butto n.
74 Extra Information Extra Information The s creen dis plays the cam era’s inform atio n. Came ra’s Ext ra Informat ion 75 How to Adjust the Property Setting System Configure From the control panel, selec t the button and the dial og box will appear as shown below.
76 By File Size - permits recording by file size from 10 MB to 50 MB. 3. Storage List This option is used to define the path to save image files. The software will creat e a ca mera name f older a s the “Storage List” which is allowed to create up to 16 File Path.
78 Motion Setting You can adjust the sensitivity le vel and choose the Invoke Alarm options to work with motion detection function. Beside s the Ala rm Beep, Send E mail c an be ena bled whe n motion dete cte d. The user can define the time interval to Send E-mail.
80 Update Firmware Enter the File Path and click the “Upda te” button, the firm ware will be updated automatically. If you are unsure of the File path, you can click the “Browse” button, th e Browse dialog box will ap pear as illustrated below.
82 A PPENDIX A Frequently Asked Questions Internet Camera Features Q: What is an Internet Camera? A: The Int ernet C amera i s a stan dalo ne sy stem conn ecting directly to an Ethernet or Fast Ethernet network and supported by the transmission based on th e IEEE 802.
84 Q: Can the Internet Camera be installed and work if a firewall exists on the network? A: If a firewall exists on the ne twork, port 80 is open for ordina ry data communic ati on. Howeve r, since the Interne t Camera transmits image data, the default port 8481 is also required.
86 C T rouble Shoo ting Q: I cannot access the Internet Camera from a web browser. A1: The poss ible cau se mig ht b e the IP Addres s for t he In ternet Camera is already b eing used by another device . To correct the possi ble pro ble m, you ne ed to f irst di sconne ct the Int ernet Camera from the network.
88 Q: Why does a serie s of br oad ve rtica l white l ine ap pears through ou t the image? A: A likely issue is that the CM OS se nsor be co mes ove rloa de d when the light sourc e is too br ight su ch as di rect exposure to sunlight or halog en light.
90 D T ime Zo ne T abl e 91.
92 E Xplug Control Inst allation Installation To Web Server 1. Installation : Copy the “xplu g.ocx” file to any WEB Server ta ble. 2. Setting (C onfiguration): From the Web Configuration menu select “System” and under the “Loading ActiveX From” input web server location (http://www.
94 Once executed, a prompt will appe ar requesting the in put of the desired language selection. Make the desired selection and click “OK” to continue. The W elcom e scre en wi ll app ear. C lick the “Next” button to proceed with the installation.
96 F Adjust Internet Camera Focus To adjust the focus of the lens, yo u need to tu rn the lens slowly in either clockwise or anti-clockw ise direction until the desired imag e app ears. DO NOT over turn the len s in eith er of t he directions as it will be out of focus.
98 Hardware Interface LAN C onnec tor: One RJ -45 p ort to co nnec t to 10/100Mbps Ethernet, auto-sensed LED Indica tor: Po wer LED (G reen) Link LED (Yellow) Note : LED three mode setting can be chan ged by software. (Nor mal / Off / Dummy) Power Supply: DC 5V, switching type Power Communication: 2.
100 HGlossary of T erms NUM BERS 10BASE-T 10BASE-T is Ethernet over UTP Category III,IV, or V unshielded twis ted- pai r med ia. 100BASE-TX The two-p air twis ted-m ed ia imp lemen tatio n of 100B ASE-T is called 100BAS E-TX . 802.11b An IEEE standard for wire less local area networks.
102 b ecause the software keeps t rack of IP addresses r ather than requ iring an admi nist rat or to ma nage t he t ask. T his means a new computer can be added to a network w ithout the hassle of manually assigning it a unique IP address.
104 Intran et This is a priv ate networ k, inside an organization or company, that uses the same software you will find on the public In ternet. The only differen ce is th at an In tranet is u sed for inte rnal usage o nly.
106 WAN – (wide area networ k): The comput ers are i n different geographic locations and are con nected by telephone lines or radio waves. NWay Protocol A network protocol that can automatically negotiate the highest possible transm ission speed between two devices.
108 T (TCP /IP) Transmission Control Protocol/Internet Protocol is a widely u sed transport protocol that connects d iverse computers of various transmission methods. It was developed y the Department of Defense to c onnect different computer types and led to the development of the Internet.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il TRENDnet TV-IP100 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del TRENDnet TV-IP100 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso TRENDnet TV-IP100 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul TRENDnet TV-IP100 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il TRENDnet TV-IP100, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del TRENDnet TV-IP100.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il TRENDnet TV-IP100. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo TRENDnet TV-IP100 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
