Manuale d’uso / di manutenzione del prodotto SISPM1040-182D del fabbricante Transition Networks
Vai alla pagina of 157
8 10/100TX + 2 10/100/1000T/Mini-GBIC Combo with 8 PoE Injector Industrial Switch User Manual SISPM1040-182D Vers ion 1. 01 October, 2009.
Transition Networks SISPM1040-182D Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 Revision History Document Release Date Revision Initials 1.
Transition Networks SISPM1040-182D Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 The contents of this manual are based on the table below listing firmware version, kernel version, and hardware version.
Transition Networks SISPM1040-182D Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 FCC Warning This Equipment has been tested and found to comply with the limits for a Class-A digital device, pursuant to Part 15 of the FCC rules.
Transition Networks SISPM1040-182D Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 Content Chapter 1 Introduction......................................... 1 1.1 Hardware Features .......................... ............ 1 1.2 Software Features .
Transition Networks SISPM1040-182D-LR Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 5.3 Login in the Console Interface................... 30 5.4 CLI Management ....................................... 32 5.5 Commands Level ......
Transition Networks SISPM1040-182D-LR Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 6.22 IGMP Conf iguration ................................ 100 6.23 X-R ing..................................................... 102 6.24 LLD P C onfiguration .
Transition Networks SISPM1040-182D-LR Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 TFTP Commands Set .......................................... 145 SystemLog, SMTP and Event Commands Set .... 145 SNTP Commands Set .............
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 International: 00-1-952-941- 7600 Chapter 1 Introduction The 8 10/100TX + 2 10/100/1000T/Mini-GBIC Combo w/8 PoE Injectors Managed Industrial Switch is a cost-effectiv e solution and meets the high reliability requirements demanded by industrial applications.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 International: 00-1-952-941- 7600 2 MAC Address 8K MAC address table Flash ROM 4Mby tes DRAM 32Mbytes Connector 10/100TX: 8 x RJ-45 10/100/1000T/ Mini-GBIC Combo: 2 x RJ-45 + 2 x 100/1000 SFP sockets RS-232 connector: RJ-45 type Netw ork Cable 10Base-T: 2-pair UTP/STP Cat.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 International: 00-1-952-941- 7600 3 Positive (V CC+): RJ-4 5 pin 1,2. Negative (VCC-): RJ-45 pin 3,6.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 International: 00-1-952-941- 7600 4 Stability Testing IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibratio.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 International: 00-1-952-941- 7600 5 1.2 Software Features Mana gement SNMP v1 v2c, v 3/ Web/T elnet/ CLI SNMP MIB RFC 1215 Tra.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 International: 00-1-952-941- 7600 6 Port Mirror Supports 3 mirroring types: “RX, TX and Both packet”.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 International: 00-1-952-941- 7600 7 4. Authorization fail 5. PD disconnect trap-PoE port event DHCP Provides DHCP Client/ DHCP.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 International: 00-1-952-941- 7600 8 1.3 Package Contents Please refer to the package content list below to verify them against the checklist.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 International: 00-1-952-941- 7600 Chapter 2 Hardware Description This chapter will describe the Industrial switch ’s hardware spec, port, cabling information, and wiring installation.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 International: 00-1-952-941- 7600 10 2.3 Bottom View The bottom panel of th e 8 10/100TX w/ X-Ring Managed Industrial Switch has one terminal block connector for two (2) DC power inputs and one fault alarm.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 International: 00-1-952-941- 7600 2.4 LED Indicators The diagnostic LEDs that provide real-time status information are located on the front panel of the industrial switch. The following table provides the description of the LED status and their meanings.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 12 On The SFP port is linking Blinks The port is transmit ting or r eceiv ing packet s from the TX device. Link/Active (P9, P10 SFP) Green Off No device attached On A network device is detected.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 Chapter 3 Hardware Installation This chapter de scribes how to physicall y install the 8 10 /100TX w/ X-Ring Managed Industrial Switch. 3.1 Installation Steps 1.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 14 3.2 DIN-Rail Mounting The DIN-Rail is factory installed. If the DIN-Rail is not screwed on the industrial switch, please see the following pictures.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 1. First, insert the top of DIN-Rail into the track. 2. Th en, lightly push th e DIN-Rail into the track. 3. Verify the DIN-Rail is tightened. 4.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 3.3 Wall Mount Plate Mounting Follow the steps below to mount the industrial switch with wall mount plate. 1. Remo ve the DIN-Rail from the industrial sw itch; loose the screws to remov e the DIN- Rail.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 3.4 Wiring the Power Inputs Please follow the steps below to insert the power wire. 1. Insert AC or DC power wires into the contacts 1 and 2 for power 1, or 5 and 6 for power 2.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 3.5 Wiring the Fault Alarm Contac t The fault alarm contacts are in the middle of the terminal block connector as the picture below shows.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 3.6 Cabling Use four twisted-pair, Category 5e or above cabling for RJ-45 port connection. The cable between the switch and the link partner (s witch, hub, workstation, etc.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 20 To co nnect th e trans ceiv er a nd LC c abl e, ple ase f ollo w the s teps show n bel ow: First, insert the transceiver into the SFP module.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 21 LC connector to the transceiver.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 22 To remove the LC connector from the transceiver, please follow the steps shown below: First, press the upper side of the LC connector to release from the transceiver and pull it out.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 Chapter 4 Network Application This chapter illustrates so me example applications.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 24 The illustration below shows an example power over Ethernet appli cation.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 4.1 X-Ring Application The industrial switch supports the X-Ring pro tocol that can help the ne twork recover from connection failure within 20ms or less, and make the network system more reliable.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 4.2 Coupling Ring Application A network may have more than one X-Ring group. The coupling ring function can connect each X-Ring for redundant backup.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 4.3 Dual Homing Application The Dual Homing function prevents lo st connection betw een an X-Ring group and an upper level/core switch. Assign two ports to be the Dual Homing ports in the X-Ring group.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 4.4 Dual Ring Application Dual ring is an advanced function that su pports ba ckup connection to ensure redundant transmission. If the connection fails, the system will re cover from fwithin 20 milliseconds.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 Chapter 5 Console Management 5.1 Connecting to the Console Port The supplied cable has an RS-232 connector on one end and an RJ-45 connector on the other end.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 30 5.3 Login in the Console Interface When the connection between the Switch and the PC is.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 31 Console login interface.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 5.4 CLI Management The switch supports console managemen t—CLI commands. After you log in to the system, you will see a command prompt. To enter CLI manage ment interface, type “ enab le ”.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 33 Global Configuration Ente r the conf igu re command while in privileged EXEC mode.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 Chapter 6 Web-Based Management This section introduces the configuration and functions of the Web-Based management. 6.1 About Web-based Management There is an embedded HTML web server residi ng in flash memory in the switch.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 35 6.3 System Login 1. Launch the Internet Explorer on the PC 2. Key in “http:// “+” the IP a ddress of the switch”, and then Press “ Enter ”.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 36 6.4 System Informa tion Users can assign the system name, description, location and con tact personnel to identify the switch. The version table below is a read-only field to show the basic inform ation of the swit ch.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.5 IP Configuration The switch is a network device which needs to be assigned an IP address for being identified on the network. Users have to decide a means of assigning IP address to the switch.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 38 IP configuration interface.
Transition Networks SISPM1040-182D Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 6.6 DHCP Server DHCP is the abbreviation of Dynamic Host Conf igurati on Protocol that is a protocol for assigning dynamic IP addresses to devices on a network.
Transition Networks SISPM1040-182D Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 6.6.1 System configuration DHCP Server: Enable or Disa ble the DHCP Server function . Enable—the switch will be the DHCP server on your local network.
Transition Networks SISPM1040-182D Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 6.6.2 Client Entries When the DHC P server function is enabled, the system will collect the DHC P client information including the assigned IP addr ess, the MAC addre ss of the client device, the IP assigning type, status and lease time.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.6.3 Port and IP Bindings Assign the dynamic IP address bound with the port to the connected client. The user is allowed to fill each port column with one particular IP address.
Transition Networks SISPM1040-182D Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 6.7 TFTP TFTP allows the user to update the switch firmware via the Trivial File Transfer Protocol (TFTP) server. Before updating, make sure the TFTP server is ready and the firmware image is located on the TFTP server.
Transition Networks SISPM1040-182D Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 6.7.2 Restore Configuration You can restore a previous backup configura tion from the TFTP server to recover the settings. Before doing so, you must locate the image file on the TFTP server.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.7.3 Backup Configuration You can back up the cu rrent configuration from flash ROM to th e TFTP server for the purpose of recovering the configuration later .
Transition Networks SISPM1040-182D Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 6.8 System Event Log This page allows the user to decide whether to send the system event log, and select the mode which the system event log will be sen t to client only, server only, o r both client and server.
Transition Networks SISPM1040-182D-LR Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 47 Sys log Conf igur ation int erfac e.
Transition Networks SISPM1040-182D Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 6.8.2 Sy stem Event Log—SMTP Configuration Simple Mail Transfer Protocol (SMTP) is the st andard for email transmissions across the network.
Transition Networks SISPM1040-182D-LR Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 49 SMTP Co nfigur ation int erfac e.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.8.3 Sy stem Event Log—Event Configuration Having ticked the Syslo g / SMTP checkboxes, the event log/email alert will be sent to the system log server and the SMTP server respectively .
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 51 Event Config urati on int erfac e.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.9 Fault Relay Alarm The Fault Relay Alarm function provides Power Failure and Port Link Down/Broken detection.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.10 SNTP Configuration SNTP (Simple Network Time Prot ocol) is a simplified version of NTP which is an I nternet protocol used to synchronize the clocks of computers to some time reference.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 54 EST - Eastern Standard CDT - Central Daylig ht -5 hours 7 am CST - Central .
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 55 CCT - China Coast, USSR Zone 7 +8 hours 8 pm JST - Japan Standard, USSR Zon.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 56 SNTP Configuration interface.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.11 IP Security IP security allows the user to assign 10 specific IP addresses that have permission to manage the switch through the http and telnet services.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 58 IP Security interface.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.12 User Authentication Change web management login user name and password for the management security issue.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.13 Port Statistics The following chart provides the current statistic information which displays the real-time packet transfer status for each port.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 61 Port Statistics interface.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.14 Port Control In Port control you can configure the settings of each port to con trol the connection parameters, and the status of each port is listed beneath.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 63 Port Control interface.
Transition Networks SISPM1040-182D Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 6.15 Port Trunk Port trunking is the combination of several ports or networ k cables to expand the connection speed beyond the limits o f any one single port or network cable.
Transition Networks SISPM1040-182D-LR Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 65 ports to be aggregated in a trunk group. Click Ad d and the ports focused in the right side will be shifted to the left side. To remove unwanted ports, select the ports and click Re m ov e .
Transition Networks SISPM1040-182D Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 6.15.2 Aggregator Information z LACP disabled Having set up the aggregator setting with LACP disabled, you will see the local static trunk group information on the tab of Aggregator Information .
Transition Networks SISPM1040-182D-LR Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 67 Port Member: This is a read-only column field that displays the members of this static trunk group.
Transition Networks SISPM1040-182D Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 z LACP ena bled Having set up the aggregator setting with LACP enabled, you will see the trunking group information between two switches on the tab of Aggregator Information .
Transition Networks SISPM1040-182D-LR Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 69 Aggreg ation Informat ion of Switch 1 5. Click on the tab of Aggregator Information to check the trunked group information as the illustration shown above after the two switches configured.
Transition Networks SISPM1040-182D Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 Swi tch 2 co nfig urati on Switch 2 configuratio n interface 1. Se t Syst em Pr io rity of t he trunk group. The default is 1. 2. Se lect a trunk group ID by pull down the drop-down menu bar.
Transition Networks SISPM1040-182D-LR Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 71 5. Click on the tab of Aggregator Information to check the trunked group information as the illustration shown above after the two switches configured.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.15.3 State Activity Having set up the LACP a ggregator on the tab of Aggregator Setting, you can configure the state activity for the members of the LACP trunk group.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 73 State Activity of Switch 2.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.16 Port Mirroring Port mirroring is a method for mon itoring traffic in switched networks.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.17 Rate Limiting Y ou can set up every port’s bandwidth rate and frame limitation type. Ingress Limit Frame type: select the frame type that wants to filter .
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 76 ¾ Ing ress: Enter the port effective ingress rate (The default value is “0”). ¾ Egress: Enter the port effective egress rate (The default value is “0”).
Transition Networks SISPM1040-182D Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 6.18 VLAN configuration A Virtual LAN (VLAN) is a logical network grouping that limits the broadcast domain, which allows you to isolate network traffic.
Transition Networks SISPM1040-182D Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 6.18.1 Port-based VLAN A port-based VLAN basically consists of its members—ports, which means the VLAN is created by grouping the selected ports.
Transition Networks SISPM1040-182D-LR Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 79 VLAN—Port Based Add interface Enter the group name and VLAN ID. Add the se lected port number into the right field to group these members to be a VLAN group, or remove any of them listed in the right field from the VLAN.
Transition Networks SISPM1040-182D-LR Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 80 VLAN —Port B ased E dit/Del ete int erfac e Use Del et e to dele te the VLAN. Use Ed i t to modify group name, VLAN ID, or a dd/remove the members of the existing VLAN group.
Transition Networks SISPM1040-182D Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 6.18.2 802.1Q VLAN Virtual Local Area Network (VLAN) can be implemented on the switch to logically create different broa dcast domains. When the 80 2.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 802.1Q Configuration Pull down the selection item and focus on 802.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 83 aware devices (switches). A T runk Port, connected to the trunk lin k, has an understanding of tagged frame, which is used for the communication among VLANs across switches.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 84 802.1Q VLAN interface Group Configuration Edit the existing VL AN Group. Select the VLA N group i n the t able lis t. Click Edi t .
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 85 Gro up Confi gurat ion i nterfa ce You can modify the VLAN group name and VLAN ID.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 86 Click App ly ..
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.19 Rapid Spanning Tree The Rapid Spanning Tree Protocol (RSTP) is an evolution of the Spanning Tree Protocol and provides for faster spanning tree convergence after a topology change.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 88 RSTP Syst em Config uration interf ace.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.19.2 Port Configuration This web page pro vides th e port configurati on interface for RSTP. You can assign higher or lower priority to each port.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 90 RSTP Port Configuration interface.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.20 SNMP Configuration Simple Network Management Protocol (SNM P) is the protocol developed to manage nodes (servers, workstations, routers, switches and hubs etc.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 92 SNMP System Configuration interface.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.20.2 Trap Configuration A trap manager is a management station that receives the trap messages generated by the switch. If no trap manager is d e fined, no traps wi ll be issued.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.20.3 SNMPV3 Configuration Configure the SNMP V3 function. Context Table Configure SNMP v3 context table. Assign the context name of context table.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 95 SNMP V3 configuration interface Access Table Configure SNMP v3 access table. Context Prefix: set up the cont ext name. Group Name: set u p the gr oup.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 96 Notify V iew Name: set up the notify view. Click Ad d to add context name. Click Rem o v e to remove unwanted context name. MIBv iew Ta ble Configure MIB view table.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.21 QoS Configuration Quality of Service (Qo S) is the ability to provide different priority to different applicatio ns, users or data flows, or to guarantee a certain level of performa nce to a data flow.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 98 QoS Configuration interface 6.21.2 Port-based Priority Configure the priority level for each port.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 99 the queuing policy for each port. Port x: Each port has 4 priority levels—High, Middle, Low, and Lowest—to be chosen. Click Ap p l y to have the configuration take effect.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.22 IGMP Configuration The Internet Group Management Protocol (IGM P) is an internal protocol of t he Internet Protocol (IP) suite. IP manages multicast traffic by using switches, routers, and hosts that support IGMP.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 101 IGMP Conf igura tion int erface.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.23 X-Ring X-Ring provides a faster redundant recovery than Spanni ng Tree topology. The action is similar to STP or RSTP, but the algorithms between them are not the same.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 103 the 2 nd Ring Port to be the working port. Enable Couple Ring: To enable the couple ring function, tick the checkbox beside the Enable Couple Ring string label.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 104 [NOTE] 1. When the X-Ring function enabled, the user must disable the RSTP. The X-Ring function and RSTP function ca nnot exist on a switch at the same time.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.24 LLDP Configuration Link Layer Discovery Protocol (LLDP) is defined in the IEEE 802.1AB, it is an emerging standard which provides a solution for the co nfigurati on issues caused by expanding LANs.
Transition Networks SISPM1040-182D Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 6.25 Security—802.1X/Radius Conf iguration 802.
Transition Networks SISPM1040-182D-LR Technical Support: 1- 800-260-1312 International: 0 0-1-952-941-7600 107 802.1x System Configuration interfa ce.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.25.2 Port Configuration You can configure the 802.1x authentication state for each port. The state provides Disa ble, Ac cept, Rejec t, and A uthoriz e.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 109 6.25.3 Misc Configuration Quiet Period: Set the period which the por t doesn’t try to acquire a supplicant. TX Period: Set the period the port waits for retransmit next EAPOL PDU during an authentication session.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.26 MAC Address Table Use the MAC address table to ensure the port security.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 111 Static MAC Addresses in terface.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.26.2 MAC Filtering By filtering MAC address, the switch can easi ly filter the pre-configured MAC address and reduce the un-safety. You can add and delete filtering MAC address.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.26.3 All MAC Addresses You can view all o f the MAC addresses learned by the selected port. Select the port number. The selected port of static & dynamic MAC address information will be displayed in here.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.26.4 MAC Address Table— Multicast Filtering Multicasts are similar to broadcasts, they are sent to all end stations on a LAN or VLAN.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.27 Power over Ethernet This segment shows the Power over Ethernet function. PoE Status Maximum Po wer Available: Dis plays the maximum power supply in Watt.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 116 a certain period (for details, see the IEEE 802.3af specification). Capacitive Detection: If t he port and c apac itiv e det ectio n are e nabl ed, t he capacitances state reads in the voltage result from the constant current.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.28 Factory Default Reset switch to default configuration.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.29 Save Configuration Save all configurations th at you have made in the system. To ensure the all configuration will be saved. Click Sav e F la s h to save the all confi guration to the flash memory.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 6.30 System Reboot Reboot the switch in software reset.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 Troubles shooting Verify that is using the right power cord/adapter (DC 24-48V), please don’t use the power adapter with DC output higher than 48V, or it may damage this device.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 Appendix A—RJ-45 Pin Assignment RJ-45 Pin Assignments The UTP/STP ports will automatically sense fo r Fast Ethernet (10Base-T/100Base-TX connections), or Gigabit Ethernet (10Base-T/100Base-TX/1000Base-T connections).
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 122 10/100Base-TX Cable Schematic The following two figures show th e 10/100Base -TX cable schematic.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 123 Straight through cables sche matic Cross over cables sche matic.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 124 RJ-45 Pin Assignment of PoE With 100BASE-TX/10BASE-T cable, pins 1 and 2 are used for transmitting da ta, and pins 3 and 6 for receiving data; pins 4, 5, 7 and 8 are used for power supplying.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 125 Pin out of PoE Endspan Hub/Swit ch Pin Signal / Name 1 TX+/VCC+ 2 TX-/VCC+ 3 TX+/VCC- 4 5 6 TX-/VCC- 7 8 Note ‘+’ and ‘-‘ signs represent the polarity of the wires that make up each wire pair.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 Appendix B—Command Sets Commands Set List User EXEC E Privileged EXEC P Global configurati o.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 127 ip dhcp G Enable DHCP client function of switch switch(config)# ip dhcp show ip P Show.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 128 ipbinding 192.168.1.1 show dhcpserver configuration P Show configuration of DHCP serve.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 129 duplex [full | half] I Use the duplex configuration command to specify the duplex mode of operation for Fast Ethernet.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 130 bandw idth t ype broadcast-multicast I Set interface ingress limit frame type to “ac.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 131 form of this command to disable the port.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 132 list separate by a comm a(ex .2, 3, 6) [Workport]: The amount of work ports, this valu e co uld n ot be less than zero or be lar ge than the amo unt of member ports.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 133 [portbase| 802.1q | gvrp] mode. or switch(vlan)# vlanmode 802.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 134 can’t be applied. trunk-link tag 3-20 vlan 8021q port [PortNumber] hybrid-l ink untag [UntaggedVID] tag [TaggedVID List] V Assign a hybrid link for VLAN by port, if the port belon g to a t runk group, this command can’t be applied.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 135 configuration command to change the interval between messages the spanning tree receives from the root switch.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 136 and learning states last before the port begins forwarding. stp-path-cost [1~200000000] I Use the spanning-tree cost interface configuration command to set the path cost fo r Spanning Tree Protocol (STP) calculations.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 137 interface. switch(c onfig-if)# stp- admin-edge True stp-admin-non-stp [True|F alse] I Admin NonSTP of STP priority on this interface.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 138 IGMP Commands Set Commands Level Description Example igmp enable G Enable IGMP snoopin.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 139 show mac-address-table stati c P Show static MAC address ta ble switch# show mac-address-table static show mac-address-table filter P Show filter MAC address ta ble.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 140 community [Community-string] trap-versi on [v1|v2 c] information and community string trap-version v1 (remove) Switch(config)# no snmp-server host 192.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 141 [OID] sho w snmp P Show SNMP configuration switch# show snmp no snmp community- strings [Community] G Remove the specified community.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 142 Port Mirroring Commands Set Commands Level Description Example monitor [RX| TX|Both] I.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 143 [port ID] system server port global configuration command to change the radius server port serverport 1812 8021x system accountport [port ID] G Use the 802.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 144 configuration command to set the supp licant timeout. 8021x misc servertimeout [sec.] G Use the 802.1x misc server timeout global configuration command to set the server timeout.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 145 TFTP Commands Set Commands Level Description Defaults Example backup flash :ba ckup _cfg G Save configuration to TFTP and need to specify the IP of TFTP server and the file name of image.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 146 [IP addr ess] server IP 192.168.1.5 smtp authentication G Enable SMTP authentication s.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 147 no event authenticati on- failure G Disable Authentication failure event typ switch(co.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 148 sntp daylight-offset [Minute] G Set offset of daylight saving time, if SNTP function is inactive, this command can’t be applied.
Transition Networks SISPM1040-1 82D-LR Technical Support: 1-800-260-1 312 In ternati onal: 00-1-952- 941-7600 149 [1st Ring Port] [2nd Ring Port] Ring Port ring couplingport [Coupling Port] G Configur.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Transition Networks SISPM1040-182D è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Transition Networks SISPM1040-182D - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Transition Networks SISPM1040-182D imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Transition Networks SISPM1040-182D ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Transition Networks SISPM1040-182D, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Transition Networks SISPM1040-182D.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Transition Networks SISPM1040-182D. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Transition Networks SISPM1040-182D insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.