Manuale d’uso / di manutenzione del prodotto SIBTF10XX-1XX-MS del fabbricante Transition Networks
Vai alla pagina of 15
User ’ s Guide SIBTF10xx-1xx-MR & SIBTF10xx-1xx-MS Substation-Rated Industrial Ethernet Switch • 10/100Base-TX to 100Base-FX • Single or Redundant Wide Input Power Supply The SIBTF10xx-1xx-M.
2 SIBTF10xx-1xx-Mx 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Available SIBTF10xx-140-MR and MS models* *MR = Redundant power-supply terminal blocks, MS = Single power-supply terminal block. Note: The cable distances listed are maximum distances typically.
4 SIBTF10xx-1xx-Mx 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Installation F eatures • The SIBTF10xx-140-MR industrial switch includes four (4) RJ-45, twisted-pair copper ports and one (1) 100 Mb fiber optic port.
6 SIBTF10xx-1xx-Mx 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Figure 3: SIBTF10xx-110-MR Front Panel Installation -- continued F eatures -- continued • The SIBTF10xx-110-MS industrial switch includes one (1) RJ-45, twisted-pair copper port and one (1) 100 Mb fiber optic port.
8 SIBTF10xx-1xx-Mx 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Installation -- continued DIP switc h settings 1. Port 1 copper Auto-Negotiation: UP (Enabled) - Advertises switch speed and mode capabilities to the network: • 100Mb/s full-duplex • 100Mb/s half-duplex, • 10Mb/s full-duplex • 10Mb/s half-duplex.
10 SIBTF10xx-1xx-Mx 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Installation -- continued Note: DO NOT use bare (exposed) or un-lugged power-source wires to connect to the industrial switch.
Installation -- continued Internal rela y connections The internal relay can activate an external fault indicator. The fault indicator connects to the relay contacts on the front panel. An example would be a fault circuit connected to a warning light located in a control room.
14 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Installation -- continued Installing fiber cable To install a fiber cable, view Figure 10, and then do the following: 1. Locate or build 100Base-FX fiber cable with male, two-stranded TX to RX connectors installed at both ends.
16 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Oper ation -- continued C opper/fiber status LEDs -- continued Copper LEDs The function of the copper port LEDs (1, 2, 3, and 4) are as follows: 100MB ON The copper port has established a link at 100 MB/s.
18 SIBTF10xx-1xx-Mx 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Oper ation -- continued Product features -- continued Auto-Negotiation The Auto-Negotiation feature allows the SIBTF10xx-1xx industrial switch to configure itself to achieve the best possible mode of operation over a link automatically.
techsupport@transition.com -- Click the “Transition Now” link for a live Web chat. 21 C able Specifications -- continued SIBTF1013-1xx-Mx 1300 nm multimode Fiber Optic Transmitter Power: min: -19.0 dBm max: -14.0 dBm Fiber Optic Receiver Sensitivity: min: -30.
22 SIBTF10xx-1xx-Mx 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 T echnical Specifications For use with Transition Networks Model SIBTF10xx-1xx-Mx or equivalent. Standards: IEEE 802.3™ 2000, IEEE 802.3x™ Data Rate: 10 Mb/s, 100 Mb/s (copper) , 100 Mb/s (fiber) Dimensions: Models 130- & 140-Mx (W x H x D) 4.
24 SIBTF10xx-1xx-Mx 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Standard Description Compliance Level Remarks IEEE1613, Power Substation Testing -- Continued IEEE1613, Clause 7.
26 SIBTF10xx-1xx-Mx 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Contact Us Technical support Technical support is available 24 hours a day. US and Canada: 1-800-260-1312 International: 00-1-952-941-7600 Transition now Chat live via the Web with Transition Networks Technical Support.
Trademark Notice All trademarks and registered trademarks are the property of their respective owners. Copyright Restrictions © 2005 Transition Networks. All rights reserved. No part of this work may be reproduced or used in any form or means (graphic, electronic, mechanical) without written permission from Transition Networks.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Transition Networks SIBTF10XX-1XX-MS è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Transition Networks SIBTF10XX-1XX-MS - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Transition Networks SIBTF10XX-1XX-MS imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Transition Networks SIBTF10XX-1XX-MS ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Transition Networks SIBTF10XX-1XX-MS, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Transition Networks SIBTF10XX-1XX-MS.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Transition Networks SIBTF10XX-1XX-MS. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Transition Networks SIBTF10XX-1XX-MS insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
