Manuale d’uso / di manutenzione del prodotto TS128M~8GJF2A del fabbricante Transcend
Vai alla pagina of 25
128MB~8GB JetFlash™ User’s Manual P/N: TS128M~8GJF2A ( Version 1.1 ).
Table of Contents Introduction Package Cont ent s .................................................................................................... 1 Featur es ........................................................................................
Introduction Thank you very much for purchasing Transcend’s JetFlash™ . This small device is designed to expedite exchanging huge amounts of data between any desktop or notebook computer with a USB port.
System Requirement s Desktop or notebook computer with USB port One of following operating systems: • Windows ® 98SE • Windows ® Me • Windows ® 2000 • Windows ® XP • Mac™ OS 9.0 or later • Linux™ Kernel 2.4.2 or later Driver Installation Driver Inst allation for Windows 98SE 1.
2. Select Install or update driver . Click Start to continue. 3. After Install or update driver is completed, click OK . 4. Plug JetFlash into an available USB port. A new Removable Disk drive with a newly assigned drive letter appears in the My Computer window.
Driver Inst allation for Windows Me, 2000, and XP No driver is required. These Windows operat ing systems have built-i n drivers to support JetFlash . Simply plug JetFlash into an available USB port, and Windows will install the files needed to use your device.
2. Select Uninstall driver . Click Start to continue. 3. After Uninstall driver has been completed, click OK . To Safely Unplug JetFlash T o Remove JetFlash in W indows 98SE Unplug JetFlash from your system directly when data is not being transferred.
3. Follow the o n-screen instructions to complete the procedure. 4. The Safe To Remove Hardware message window appears. JetFlash is now ready to be unplugged. T o Remove JetFlash in Mac OS Drag and drop the Disk icon corresponding to JetFlash into the trashcan.
System Requirement s for the Boot-Up Function • • • A desktop or notebook computer that supports USB-ZIP or USB-HDD as the First Boot Device in BIOS Windows 98SE or Me on the C: drive Any anti-virus program present must be turned off Boot-Up Function is not supported for Mac or Linux Operating Systems.
Format Introduction JetFlash Product Number, Drive Letter and Capacity Information of Partitioned Disk 1 Disk-Volume bar. Use it to make two partitions and adjust the capacity sizes. The minimum size is 2MB. Information of Partitioned Disk 2 Progress bar T ype of Format Quick: Erase and check blocks at the same time.
Configuration Slide the Disk-Volume bar to adjust the disk size of your JetFlash . You can make one disk or two disks by adjusting the volume sizes. The options will change automatically and enable your choice. Make an USB-ZIP startup disk: When the size of Disk 1 is set to be larger than 2MB.
Option 1: Make an USB-ZIP st artup disk a. Select Type of format (Quick, Full or Configure device only) and Make USB-ZIP startup disk option. Click Start to continue. b. After the completion of the format, you need to re-insert JetFlash to enable the settings.
Option 2: Make an USB-HDD st art up disk (Only for W indows 98SE) a. Select Type of format (Quick, Full or Configure device only) and Make USB- HDD startup disk option. Click Start to continue. b. After the compl etion of the format, you need to re-insert JetFlash to enable the settings.
Create T wo Partitions Slide the Disk-Volume bar to adjust the size of Disk1 to fit your needs. The size of Disk2 will be changed automatically according to the size of Disk1 , as adjusted by the user. JetFlash can be setup to a USB-ZIP or USB-HDD boot-up mode as indicated below.
b. After the completion of the format, you need to re-insert JetFlash to enable the settings. Restart your computer and press the Delete key (or whatever key combination is correct for your computer) during boot-up to enter Setup (CMOS Setup Utility) to reconfigure BIOS .
b. After the completion of the format, you need to re-insert JetFlash to enable the settings. Restart your computer and press the Delete key (or whatever key combination is correct for your computer) during boot-up to enter Setup (CMOS Setup Utility) to reconfigure BIOS .
Security Function The Security Function is not supported by Mac or Linux Operating Systems. Security Function for Windows 98SE, Me, 2000, and XP Create Single Partition 1. You must run the mFormat Utility program on the JetFlash to enable this feature.
3. Set default password window will appear and require you to enter the password. Enter the Password and the Password hint you want, and click OK . 4. Return to the Format Utility window. Click Start to continue. 5. Make sure you have performed a backup of the files on your JetFlash .
2. 3. 4. Set default password window will appear and require you to enter the password. Enter the Password and the Password hint you want, and click OK . Return to the Format Utility window. Click Start to continue. After the completion of the format, you need to re-insert JetFlash to enable the settings.
Use of JetFlash with Security Function Enabled 1. Insert JetFlash and run the mFormat Utility program. Click the Login button . 2. Enter the co rrect password to access data on the secured disk. 3. When you finish, you need to safely remove JetFlash to protect data (procedure described as below).
Change the Password 1. Insert JetFlash , run the mFormat Utility program and click Login , the Login window appears. 2. Click Change >> to continue. 3. Key in the New pas swo rd , Re-Enter new password and a Hint . 4. Click OK to complete the change of password.
PC-Lock Function Once the PC-Lock function is enabled, you can use the JetFlash as a key to lock your computer, protecting it from being used by unauthorized persons. The PC-Lock function is not supported on Mac and Linux Operating Systems. To use the PC-Lock function, you must login into the Windows OS with Administrator rights.
5. Then click o n the Enable button to enable the PC-Lock function. 21.
Specifications Size: 75mm x 25mm x 11mm (Mini Size) 88mm x 33mm x 15mm (Normal Size) Weight: 15 g (Mini Size) 24 g (Normal Size) Data Retention: Up to 10 years Erase Cycles: ＞ 100,000 times Speed: Read 10.0 MB/sec (Max.) Write 8.
JetFlash Limited Warranty “Above and beyond” is the standard we set ourselves for customer service at Transcend. We consistently position ourselves to be significantly above the industry norm. It’s all part of our commitment to Customer Satisfaction.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Transcend TS128M~8GJF2A è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Transcend TS128M~8GJF2A - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Transcend TS128M~8GJF2A imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Transcend TS128M~8GJF2A ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Transcend TS128M~8GJF2A, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Transcend TS128M~8GJF2A.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Transcend TS128M~8GJF2A. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Transcend TS128M~8GJF2A insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
