Manuale d’uso / di manutenzione del prodotto S2-RPC del fabbricante Bay Technical Associates
Vai alla pagina of 101
OWNER'S M ANUAL __________ ______ DS-R PC DATA SW ITCH/P OWER CONTROL FOR MODELS DS2-RPC DS4-RPC Including the DS71 DS71-MD2 DS74 & DS73 Modules BayTech Manual Publication #U140A124-01 August.
ii Copyright 1998 by Bay Technical Associates, Inc. BayTech, Telplex, LaserShare, Print Master and TRAN-X are registered tradem arks of Bay Technical A ssociates, Inc. IBM, IBM PC, IBM PC/AT, IBM PC/XT are products a nd registered trademarks of International Business Machines Co rporation.
DS-RPC OWNER’S MANUAL ABOUT THIS OWNER’S MANUAL _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ iii ABOUT THIS OWNER’S MANUAL This document provides information required for installing and opera ting your Bay Tech equipment.
DS-RPC OWNER’S MANUAL ABOUT THIS OWNER’S MANUAL _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ iv The information in this document is subject to change without notice.
DS-RPC OWNER’S MANUAL TABLE O F CON TENTS _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ v ABOUT THIS OWNER’S MANUAL iii INTRODUCTION TO THE D.
DS-RPC OWNER’S MANUAL TABLE O F CON TENTS _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ vi DS71-MD2 31 PORT DEVICE NAME 34 PORT SELECT CODE 35 .
DS-RPC OWNER’S MANUAL TABLE O F CON TENTS _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ vii TECHNICAL SUPPORT 69 EQUIPMENT SETUP 70 REPACKAGING.
DS-RPC OWNER’S MANUAL INTRODUCTION TO THE DS-RP C _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 1 INTRODUCTION TO THE DS-RPC BayTech’s DS-RPC provides a single dialup or EIA-232 gatewa y to multiple EIA-232 devices.
DS-RPC OWNER’S MANUAL INTRODUCTION TO THE DS-RP C _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 2 In a typical application, the host port of th.
DS-RPC OWNER’S MANUAL INTRODUCTION TO THE DS-RP C _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 3 PROGRAMMABLE FEATURES OF THE DS MODULES Highlight ed featur es indic ate item s m ost often program med FEATURE DESCRIPTION ACTION PAGE NO.
DS-RPC OWNER’S MANUAL INTRODUCTION TO THE DS-RP C _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 4 PROGRAMMABLE FEATURES OF THE DS MODULES (con’t) FEATURE DESCRIPTION ACTION PAGE NO.
DS-RPC OWNER’S MANUAL INTRODUCTION TO THE DS-RP C _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 5 PROGRAMMABLE FEATURES OF THE DS MODULES (con’t) FEATURE DESCRIPTION ACTION PAGE NO. DS73TP N ETWORK M ODULE Module I P Addr ess I P Addre ss fo r the DS 73TP to acce ss the netw ork.
DS-RPC OWNER’S MANUAL QUICK START _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 6 DS-RPC QUICK START This section, “Quick Start,” describes the basic steps r equired to set up and configure your DS-RPC.
DS-RPC OWNER’S MANUAL QUICK START _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 7 Or this menu if the DS71-MD2 is used: Data Sw itch Series - F .
DS-RPC OWNER’S MANUAL QUICK START _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 8 Accessing R PC Menu Select the RPC module. The following status menu appears: DS-R PC Series (C) 1997 by BayTe ch Rev.
DS-RPC OWNER’S MANUAL QUICK START _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 9 To configure a module, ente r the number associated with t hat followed b y <cr>.
DS-RPC OWNER’S MANUAL INSTA LLATION _______ _________ ______ ________ __________ _______ ___________ ________ ______ _________ _________ 10 INSTALLATION UNPACKING Compare the unit and serial number of the equipment you received to the packing slip located on the outside of the box.
DS-RPC OWNER’S MANUAL INSTA LLATION _______ _________ ______ ________ __________ _______ ___________ ________ ______ _________ _________ 11 PREPARING THE INSTALLATION SI TE The installation area should be clean and fr ee of ex treme temperatures and humidity.
DS-RPC OWNER’S MANUAL INSTA LLATION _______ _________ ______ ________ __________ _______ ___________ ________ ______ _________ _________ 12 CAUTION: For PERMANENT LY CONNECTED EQUIPMENT, a readil y accessible disconnect device shall be incorporated in the fix ed wiring.
DS-RPC OWNER’S MANUAL CABLING _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 13 CABLING RJ-45 CABLES AND ADAPTERS IMPORTANT : The DS-RPC host co.
DS-RPC OWNER’S MANUAL CABLING _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 14 Tables 2 and 3 defi ne the p in lay out for the DS71 or D S71-MD2 an d D S74.
DS-RPC OWNER’S MANUAL CABLING _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 15 DS74 EIA-232 RJ-4 5 Pin/Sign al Definition Pin EIA -232 Signal Description 1 Hand shake Out (DTR) Line Driv er Inactive State = Low: Used as a handshake line to enable/disable the receiving of characters.
DS-RPC OWNER’S MANUAL CABLING _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 16 MODEM CONNECTIONS In addition to the RJ-45 port, the DS71-MD2 Host Communications Module has two RJ-11 ports for connectin g to telephone lines.
DS-RPC OWNER’S MANUAL CABLING _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 17 IMPORTANT: U se crossed RJ-45 cab les whe n us ing mod ular connectors to in terface the D S-Series to ano ther Bay Tech product with modula r co nne ctors , s uch as the RPC Re mo te P ower C ontro l Unit.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 18 DETAILED OPERATION AND CONFIGURATIO.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 19 Load serial port communications software. Configure serial communications parameters for the host terminal to match the DS71 or DS71-MD2 module.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 20 10BASE-T NETWORK Using a straight 10Base-T cable, connect the PORT CONNECTION RJ-45 port labeled ETHERNET on the DS73TP module to an RJ-45 port on the network hub.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 21 OPERATION ACCESSING MAIN Power on the DS-RPC. A similar MENU heading and main menu app ears if using the DS71: Data Sw itch Series - F .
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 22 Device A (2,1)..... ..........1 Device B (2,2) ............ ...2 Device C (2,3)..... .
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 23 SELECTING A DEVICE There are two methods of s electing a device, menu driven selection and ASCII character string method.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 24 Binary Mod e If binary data containing the port select code is sent to a module, the DS-RPC may interpret the data as a command to change ports.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 25 PPP DIAL-UP Using Windows 95 Dial-Up Networking CONNECTION or another dial-up networking program with PPP, dial the modem conne cted to the host module.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 26 CONFIGURATION DS71 OR DS71-MD2 If you are using the Menu Selection Method, CONFIGURATION select C, “Configure,” followed b y <cr> from the DS-RPC Main Menu.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 27 Or this for the DS71-MD2; Copyright ( C) Bay Tec hnica l Associate s 1998 DS71–M D2 – V.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 28 The status of the following features appea rs: Installed Modules: 1, 2, 3, …(etc) Port Sele ct Code is .
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 29 DS71 From the configuration menu, select #2, “Serial Port Configuration”, followed by <cr>.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 30 Type "B" for 115.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 31 IMPORTANT: T his messag e reminds y.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 32 NOTE: DTR is unchang eable when con figuring the serial port. When configuring the Host Modem, Xon/Xoff, RTS, and DTR are hardware settings and, therefore, unch angeable.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 33 Set Word Si ze by selecting #3, “Set Word Size.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 34 If y ou have made necessary changes to the host device, ty pe "Y" for y es, followed by <cr>.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 35 Enter a new port device name u p to 16 characters.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 36 Type "Y" to chang e the port select c ode, followed by <cr>. The hos t mo dule respon ds: Enter Port S elect C ode (Max .
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 37 if you want the a ttention character t o be " %" , type % followed by <cr>.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 38 Type “Y” for yes or “N” for no f ol lowed by <cr> to toggle the existing stat us or ty pe <cr> for no change.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 39 If y ou are enabling Port I D Echo, choose #2 to echo the modu le and por t nu mber, followed by <cr>.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 40 NOTE: This head er may appea r different dependin g on type of module installed . From the s election m enu, sel ect #1, “Head er,” fol lowed b y a carri age r etur n <cr>.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 41 To toggle Pas sword status, select #2, “Enable/Disable,” followed by <cr>.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 42 If enabled, the following header and menu appears: Data Sw itch Series - F .
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 43 NOTE : The auto con ne ct p ort has pr iority ove r the log in setu p menu. If Auto Connect Port is enabled, the header and main menu are automatically disabled.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 44 Toggle Auto Connect P ort feature by selecting #2, “Enab le/D isable,” from the A uto Connect Port menu foll owed by <cr>.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 45 From the configuration menu, select #9, “DCD Logon/Logoff,” followed b y <cr>.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 46 Rings to Configure the number of rin gs (1 - 4) for the Answer modem to answer). For ex ample, if the rings to auto-a nswer are 3, the modem will answer following the third ring.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 47 Modem to Modem Xon/Xoff Flow Control is ....Disa bled Enab le? (Y/N, C R for no change) : Type “Y” for yes followed by <cr> if you want to enable Xon/Xoff.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 48 Escape The Escape Character (0 to 127 decimal Character value) allows charac ters to be interpreted as commands instead of data.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 49 UNIT ID The unit ID (64 chars. max.) appears in the DS series module Main Menu and uniquel y identifies the unit.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 50 Use the menu driven selection or th.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 51 DS74 CONFIGURATION If you are using the Menu Selection Method, select C, “Configure,” followed b y a carria ge return <cr> from the DS-se ries Main Menu.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 52 SERIAL PORT Selections 1-8 are fully programma ble in the CONFIGURATION DS74 module. Select the parameter to change, make the chan ge, then save to non- volatile memory .
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 53 DS73TP The DS73TP peripheral communications CONFIGURATION module supports remote access to TCP/IP Ethernet networks by using the DS71 or DS71-MD2 module and the DS Series Data Switch.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 54 DS73TP Ethernet Module F.0.02 Co pyrigh t (C) 1 997 Bay Techni cal Associ ates Enter user name: Enter the curre nt user name; default use r name is user1 .
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 55 From the configuration menu, select #1, “Module IP Address,” followed b y <cr>.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 56 Enter Dial-Up IP address in dotted decimal form: Enter the Dial-Up IP Address (Example: 200.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 57 If you fail to enter the Subnet Mas.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 58 Primary From the configuration menu, select #5, DNS “Primar y DNS (Domain Name Server),” followed b y <cr>.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 59 Enter Secondary DNS address in dot ted de cim al form: The DS73TP responds indefinitel y with the same request until the Secondar y DNS address is entered i n the corre ct form.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 60 If you fail to enter the Se condar .
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 61 If desired, enter a new p assword (8 chars. max.) followed b y <cr>. The DS73TP resumes the co nfiguration menu.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 62 RPC OPERATION The RPC menu allows the use r to monitor and control the equipm ent attached to each of the RPC four receptacles.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 63 If the status menu fails to appear, ensure the correct cabl es and adapters are bei ng used and they are connected prop erly.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 64 The REBOOT n command will reboot or reset equipment attached to correspondin g receptacle (s).
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 65 RPC > CONFIG 1) . . . Cha nge Password 2) . . . Cha nge Ou tlet Name 3) . . . Ena ble/Disable Con firmation 4) .
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 66 enter the new password correctl y, the DS- RPC returns to the main menu a gain, but y ou will not get an “Error” message.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 67 1) . . . OUTLET 1 2) . . . OUTLET 2 3) . . . OUTLET 3 4) . . . Rou ter 1 Enter Request: To return to the RPC > prompt, press any key at the “Enter Request” prompt.
DS-RPC OWNER’S MANUAL DETAILED OPERATION AND CONFIGURATION _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 68 Circuit B reaker: On 1) Outlet 1 : .
DS-RPC OWNER’S MANUAL TECHNICAL SUPPO RT _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 69 TECHNICAL SUPP ORT BayTech has a staff o f applications engineers on dut y to assist y ou from 7 a.m. to 6 p.
DS-RPC OWNER’S MANUAL TECHNICAL SUPPO RT _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 70 EQUIPMENT SETUP DS-RPC Model ____________ DS-RPC Seri.
DS-RPC OWNER’S MANUAL REPACKAGING, SHIPPING AND RET URNING TO THE F ACT ORY _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 71 REPACKAGING, SHIPPING AND RETURNIN G TO THE FACTORY If your DS-Series unit needs service, up grade, or repai r, return it to BayTech.
DS-RPC OWNER’S MANUAL FCC RADIO FREQUENCY INTE RFACE STATEMENT _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 72 FCC RADIO FRE QUENC Y INTERFACE.
DS-RPC OWNER’S MANUAL FCC RADIO FREQUENCY INTE RFACE STATEMENT _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 73 1. The telephone number of this unit. 2. The ringer equivalenc e number (indicated on the label).
DS-RPC OWNER’S MANUAL APPENDIX A _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 74 APPENDIX A SPECIF ICATIONS Table A.1 Base Unit DS71 Host Module DS71- MD2 Host Module DS74 Peripheral Module DS73TP Network Module I/O Module s 2 or 4 N/A N/A N/A N/A Power Req uiremen ts 115VAC, 60H z 0.
DS-RPC OWNER’S MANUAL APPENDIX A _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 75 APPENDIX A Base Unit DS71 Host Module DS71-MD2 Host Module DS74 Peripheral Module DS73TP Network Module I nterf ace N/A EI A-232, -12V m ark, +12V s pace EIA -232, -12V m ark, +12V s pace V.
DS-RPC OWNER’S MANUAL APPENDIX B _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 76 APPENDIX B MODEM COMMAND SUMMARY U.
DS-RPC OWNER’S MANUAL APPENDIX B _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 77 APPENDIX B MODEM COMMAND SUMMARY (Cont.
DS-RPC OWNER’S MANUAL APPENDIX C _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 78 APPENDIX C WINDOWS 95 DIAL-UP NET WORKING TUTORIAL The fo.
DS-RPC OWNER’S MANUAL APPENDIX C _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 79 APPENDIX C PROPERTIES Highlight the device you have just created. Select “File” from the Windows task bar.
DS-RPC OWNER’S MANUAL APPENDIX C _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 80 APPENDIX C Click the “Save P assword” box in the “C onnect” screen. Enter the telephone number of the unit you are dialing.
DS-RPC OWNER’S MANUAL APPENDIX D _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 81 APPENDIX D - DRAWINGS DS71 MECHANI CAL LAYOUT.
DS-RPC OWNER’S MANUAL APPENDIX D _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 82 DS71-MD2 MECHANI CAL LAYOUT.
DS-RPC OWNER’S MANUAL APPENDIX D _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 83 DS74 MECHANI CAL LAYOUT.
DS-RPC OWNER’S MANUAL APPENDIX D _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 84 DS73 MECHANI CAL LAYOUT.
DS-RPC OWNER’S MANUAL APPENDIX D _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 85 DS71 FACEPLATE LAYOUT.
DS-RPC OWNER’S MANUAL APPENDIX D _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 86 DS71-MD2 FACEPLATE LAYOUT.
DS-RPC OWNER’S MANUAL APPENDIX D _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 87 DS73TP FACEPLATE LAYOUT.
DS-RPC OWNER’S MANUAL APPENDIX D _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 88 DS74 FACEPLATE LAYOUT.
DS-RPC OWNER’S MANUAL APPENDIX E _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 89 APPENDIX E EPROM UP GRADE If you receive an EPROM upg rade, y ou will need a screwdriver and an I C DIP extractor or a pair of curved needle-no se pliers 1.
DS-RPC OWNER’S MANUAL APPENDIX E _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 90 d. Replace the module (ensure the screws are fastened to connect chassis ground) and retur n power t o the uni t.
DS-RPC OWNER’S MANUAL APPENDIX F _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 91 APPENDIX F ASCII CHARACTER DEFINITION ASCII CHARACTER DEFINIT.
DS-RPC OWNER’S MANUAL INDEX _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 92 A Accessing a D evice · 7 Acce ssing Ma in Menu · 2 1 Adapte rs .
DS-RPC OWNER’S MANUAL INDEX _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 93 Interface · 72 Internal M odem · 19 Internal Relays · 12 IP Add.
DS-RPC OWNER’S MANUAL INDEX _______ _________ ______ ________ __________ _________ _________ ________ ______ _________ _________ 94 U Unit ID · 6, 7, 21, 22, 25, 27, 28 , 39, 41, 4 2, 49 Unpacki ng.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Bay Technical Associates S2-RPC è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Bay Technical Associates S2-RPC - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Bay Technical Associates S2-RPC imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Bay Technical Associates S2-RPC ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Bay Technical Associates S2-RPC, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Bay Technical Associates S2-RPC.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Bay Technical Associates S2-RPC. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Bay Technical Associates S2-RPC insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
