Manuale d’uso / di manutenzione del prodotto DS74 del fabbricante Bay Technical Associates
Vai alla pagina of 15
DS Series Manual DATA SWITCH DS74 Serial Input - Output Module BayTech Manual Publication Revision May 2008.
DS74 Serial I/O Module 2 Copyright 2007 by Bay Technical Associates, Inc. BayTech, is a registered trademarks of Bay Technical Associates, Inc. Windows 2000®, Windows XP® are products and reg istered trademark of Microsoft Corporation. Tera Term is a product and registered trademark of Vector, I nc.
DS74 Serial I/O Module 3 Cabling ............................................................................................................................................................ 4 RJ-45 Cables and Adapters .................................
DS74 Serial I/O Module 4 Cabling RJ-45 Cables and Adapters DS74 EIA-232 RJ-45 Signal Pin EIA 232 Signal Signal Direction Description 1 DTR Out Handshake, Line Driver Inactive State = Low: -12V when port is selected unless programmed differently. Used as a handshake line to enable/disable the receiving of characters.
DS74 Serial I/O Module 5 Adapters RJ08X007 Figures 1 and 2 provide vi sual representation of an RJ-45 receptacle and plug. Serial Setup • Connect the EIA-232 port to a Baytech device via the RJ08X007 rolled flat ribbon cable. • Baytech makes custom cables for som e devices.
DS74 Serial I/O Module 6 Unit Configuration Menu The configuration menu allows the user to choo se wh ich unit they would like to access. Enter the number that corresponds with the Host Module followed by a <c r>. Now the module can be configured as shown.
DS74 Serial I/O Module 7 Status Displays the current configuration of each I/O port. Serial Port Configuration Since the DS74 I/O modules use different serial port configurations. Handshaking, Baud Rate, Word Size, Stop Bits, and Parity can all be configured through the HOS T module using the menus.
DS74 Serial I/O Module 8 Type a number to select the handshaking option and press <cr>. 1. Software Handshaking: This style uses actual d ata bytes as control characters. The lines necessary are TX, Rx, and ground since the control characters are sent over the tran smission line like regular data.
DS74 Serial I/O Module 9 Word Size The word size is the measurement of the actual data bits in a tran sm ission. Which setting you choose depends on what information you are transferring. For ex ample, standard ASCII has values from 0 to 127 (7 bits).
DS74 Serial I/O Module 10 Select 5 ), to get the Parity, Default is None the Host m odule responds: Type a number to select the Parity option and press <cr>. RTS/DTR Line Driver Inactivity State RTS (Request to Send)/ DTR (Data Terminal Ready) is normally used in conj unction with an external modem.
DS74 Serial I/O Module 11 NOTE: Once you make a change to the Port Device Name, you have to back out of the menu and will be asked to Accept changes. If you type ‘y’ for yes, the changes take effect immediately for the serial port. Type ‘Y’ for YES or ‘N’ for NO and press <cr>.
DS74 Serial I/O Module 12 Type ‘Y’ for YES or ‘N’ for NO and press <cr>. Verify DS74 is functioning: A rollover cables (pin out 1-8, 2-7, 3-6, 4-5, 5-4, 6-3, 7-2, 8-1) and a 9-pin adapter (9FRJ45PC-1) and Ethernet or Modem cable. 1. Set up the Host module with modem or Ethernet cables for normal operations.
DS74 Serial I/O Module 13 BayT ech Product W arranty Bay Technical Associates (BayTech) warrants that its products will be free from defects in m aterials and workmanship under normal use for a period of two years fr om date of purchase (or from date of shipm ent from BayTech if proof of purchase is not provided).
DS74 Serial I/O Module 14 Technical Support BayTech offers Tech Support for the lifetime of the produc t. A staff of Applications Engineers is on duty to assist with installation, set up or ope ration issues. Support is available from 8:00 a.m. to 5 p.
DS74 Serial I/O Module 15 Return Authorization Process: 1. Contact BayTech to get a Return Authorization (RA) Number. IMPORTANT: BayTech will not accept any returns without an RA number. 2. Package the unit carefully in its original packagin g or similar packaging.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Bay Technical Associates DS74 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Bay Technical Associates DS74 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Bay Technical Associates DS74 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Bay Technical Associates DS74 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Bay Technical Associates DS74, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Bay Technical Associates DS74.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Bay Technical Associates DS74. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Bay Technical Associates DS74 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
