Manuale d’uso / di manutenzione del prodotto 1018D-73MTF del fabbricante SUPER MICRO Computer
Vai alla pagina of 124
S UPER S ER VER 1018D-73MTF S UPER ® USER’S MANUAL 1.0.
The information in this User ’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates.
iii Preface Preface About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the SuperServer 1018D-73MTF . Installation and maintenance should be performed by experienced technicians only .
S UPER S ERVER 1018D-73MTF User's Manual iv Chapter 5: Advanced Motherboard Setup Chapter 5 provides detailed information on the X10SL7-F motherboard, including the locations and functions of connections, headers and jumpers. Refer to this chapter when adding or removing processors or main memory and when recon fi guring the motherboard.
v Preface Notes.
vi T able of Contents Chapter 1 Introduction 1-1 Overview ......................................................................................................... 1-1 1-2 Motherboard Features ..........................................................
vii T able of Contents 3-2 Control Panel Buttons ..................................................................................... 3-1 Reset ..........................................................................................................
viii S UPER S ERVER 1018D-73MTF User's Manual 5-5 Installing Memory ............................................................................................ 5-7 Memory Population Guidelines ....................................................
Chapter 1 Introduction 1-1 Overview The SuperServer 1018D-73MTF is a high-end server comprised of two main subsystems: the SC1 13MTQ-330CB 1U server chassis and the X10SL7-F single processor motherboard. Please refer to our web site for information on operating systems that have been certi fi ed for use with the system (www .
1-2 S UPER S ERVER 1018D-73MTF User's Manual 1-2 Motherboard Features At the heart of the SuperServer 1018D-73MTF lies the X10SL7-F , a single proces- sor motherboard based on Intel's C222 chipset. Below are the main features of the X10SL7-F (see Figure 1-1 for a block diagram of the chipset).
1-3 Chapter 1: Introduction 1-3 Server Chassis Features The SC1 13MTQ-330CB is a short depth (20") 1U chassis that features eight 2.5" hard drive bays and a high-ef fi ciency power supply . The following is a general outline of the main features of the SC1 13MTQ-330CB chassis.
1-4 S UPER S ERVER 1018D-73MTF User's Manual Figure 1-1. Intel C222 Chipset: System Block Diagram Note: This is a general block diagram. Please see Chapter 5 for details. Intel DDR3 (CHA) (H3) PCIe3.0_x8 VRM 12.5 SVID LPC I/O NCT6776D PCIe x16 SLOT RJ45 RJ45 DDR3 (CHB) DIMM1 DIMM2(Far) DIMM1 DIMM2(Far) 4 UDIMM MISC VRs 1600/1333MHz 8.
1-5 Chapter 1: Introduction 1-4 Contacting Supermicro Headquarters Address: Super Micro Computer , Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. T el: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.
1-6 S UPER S ERVER 1018D-73MTF User's Manual Notes.
Chapter 2: Server Installation 2-1 Chapter 2 Server Installation 2-1 Overview This chapter provides a quick setup checklist to get your SuperServer 1018D-73MTF up and running. Following these steps in the order given should enable you to have the system operational within a minimum amount of time.
2-2 S UPER S ERVER 1018D-73MTF Manual • This product is not suitable for use with visual display work place devices acccording to §2 of the the German Ordinance for Work with V isual Display Units.
Chapter 2: Server Installation 2-3 Rack Mounting Considerations Ambient Operating T emperature If installed in a closed or multi-unit rack assembly , the ambient operating tempera- ture of the rack environment may be greater than the ambient temperature of the room.
2-4 S UPER S ERVER 1018D-73MTF Manual 2-4 Installing the System into a Rack This section provides information on installing the SuperServer 1018D-73MTF into a rack. If the 1018D-73MTF has already been mounted into a rack, you can skip ahead to Sections 2-5 and 2-6.
Chapter 2: Server Installation 2-5 Figure 2-2. Installing Chassis Rails Inner Rails The SC1 13MTQ chassis includes a set of inner rails in two sections: inner rails and inner rail extensions. The inner rails are pre-attached and do not interfere with normal use of the chassis if you decide not to use a server rack.
2-6 S UPER S ERVER 1018D-73MTF Manual Outer Rails Installing the Outer Rails to the Rack (Figures 2-3 and 2-4) 1. Attach the short bracket to the outside of the long bracket. Y ou must align the pins with the slides. Also, both bracket ends must face the same direction.
Chapter 2: Server Installation 2-7 SCALE 0.380 Figure 2-4. Installing the Outer Rails to the Rack 2 3 3.
2-8 S UPER S ERVER 1018D-73MTF Manual Figure 2-5. Installing the Server into a Rack Installing the Chassis into a Rack (Figure 2-5) 1. Con fi rm that chassis includes the inner rails and rail extensions . Also, con fi rm that the outer rails are installed on the rack.
Chapter 2: Server Installation 2-9 Installing the Server into a T elco Rack T o install the SuperServer 1018D-73MTF into a T elco type rack, use two L-shaped brackets on either side of the chassis (four total). First, determine how far follow the server will extend out the front of the rack.
2-10 S UPER S ERVER 1018D-73MTF Manual Notes.
Chapter 3: System Interface 3-1 Chapter 3 System Interface 3-1 Overview There are several LEDs on the control panel to keep you constantly informed of the overall status of the system as well as the three buttons described below .
3-2 S UPER S ERVER 1018D-73MTF Manual NIC1 Indicates network activity on LAN1 when fl ashing. NIC2 Indicates network activity on LAN2 when fl ashing. HDD Indicates SA T A and/or peripheral drive activity when fl ashing. Power Indicates power is being supplied to the system's power supply units.
Chapter 3: System Interface 3-3 Overheat/Fan Fail/UID LED When this L ED fl as hes i t indi c ates a fa n fai lure. W he n co ntin uou sly on (not fl ashing ) it i ndi c ate s an ove rh eat co nd it.
3-4 S UPER S ERVER 1018D-73MTF Manual Notes.
4-1 Chapter 4: W arning Statements for AC Systems Chapter 4 Standardized W arning Statements for AC Systems 4-1 About Standardized W arning Statements The following statements are industry standard warnings, provided to warn the user of situations which have the potential for bodily injury .
4-2 S UPER S ERVER 1018D-73MTF User's Manual W arnung WICHTIGE SICHERHEITSHINWEISE Dieses W arnsymbol bedeutet Gefahr . Sie be fi nden sich in einer Situation, die zu V erletzungen führen kann.
4-3 W arning Statements for AC Systems 안전을 위한 주의사항 경고! 이 경고 기호는 위험이 있음을 알려 줍니다. 작업자의 신체에 부상을 야기 할 수 있는 상태에 있게 됩니다.
4-4 S UPER S ERVER 1018D-73MTF User's Manual Installation Instructions W arning! Read the installation instructions before connecting the system to the power source. W arnung V or dem Anschließen des Systems an die Stromquelle die Installationsanweisungen lesen.
4-5 Chapter 4: W arning Statements for AC Systems Circuit Breaker W arning! This product relies on the building's installation for short-circuit (overcurrent) protection.
4-6 S UPER S ERVER 1018D-73MTF User's Manual Power Disconnection W arning 電源切断の警告 システムコン ポ ー ネン トの 取 り 付 け また は 取り 外し の た め に .
4-7 Chapter 4: W arning Statements for AC Systems ¡Advertencia! El sistema debe ser disconnected de todas las fuentes de energía y del cable eléctrico quitado de los módulos de fuente de alimentación antes de tener acceso el interior del chasis para instalar o para quitar componentes de sistema.
4-8 S UPER S ERVER 1018D-73MTF User's Manual Equipment Installation 機器の設置 ト レー ニ ン グを受 け認定さ れた人だけが こ の 装 置の 設 置、 交換、 ま たは.
4-9 Chapter 4: W arning Statements for AC Systems ア ク セ ス 制限区域 この ユ ニッ トは 、 ア ク セ ス 制限区域に 設置 さ れ る こ と を想定 し て い ま す 。.
4-10 S UPER S ERVER 1018D-73MTF User's Manual Battery Handling W arning! There is the danger of explosion if the battery is replaced incorrectly .
4-1 1 Chapter 4: W arning Statements for AC Systems W arnung Bei Einsetzen einer falschen Batterie besteht Explosionsgefahr . Ersetzen Sie die Batterie nur durch den gleichen oder vom Hersteller empfohlenen Batterietyp. Entsorgen Sie die benutzten Batterien nach den Anweisungen des Herstellers.
4-12 S UPER S ERVER 1018D-73MTF User's Manual W arnung Dieses Gerät kann mehr als eine Stromzufuhr haben. Um sicherzustellen, dass der Einheit kein trom zugeführt wird, müssen alle V erbindungen entfernt werden. ¡Advertencia! Puede que esta unidad tenga más de una conexión para fuentes de alimentación.
4-13 Chapter 4: W arning Statements for AC Systems Backplane V oltage バ ッ ク プ レー ン の電圧 シ ス テ ムの稼働 中は危 険な電圧 ま た は電 力が、 バッ ク プレ .
4-14 S UPER S ERVER 1018D-73MTF User's Manual Comply with Local and National Electrical Codes W arning! Installation of the equipment must comply with local and national electrical codes.
4-15 Chapter 4: W arning Statements for AC Systems Product Disposal W arning! Ultimate disposal of this product should be handled according to all national laws and regulations. יצראה למשחה יקוח םואית ! הרהזא תנקתה םייצראהו םיימוקמה למשחה יקוחל תמאות תוי הל תבייח דויצה .
4-16 S UPER S ERVER 1018D-73MTF User's Manual W aarschuwing De uiteindelijke verwijdering van dit product dient te geschieden in overeenstemming met alle nationale wetten en reglementen. ¡Advertencia! Al deshacerse por completo de este producto debe seguir todas las leyes y reglamentos nacionales.
4-17 Chapter 4: W arning Statements for AC Systems W arnung Die Lüfter drehen sich u. U. noch, wenn die Lüfterbaugruppe aus dem Chassis genommen wird. Halten Sie Finger , Schraubendreher und andere Gegenstände von den Öffnungen des Lüftergehäuses entfernt.
4-18 S UPER S ERVER 1018D-73MTF User's Manual W arning! When installing the product, use the provided or designated connection cables, power cables and AC adaptors.
4-19 Chapter 4: W arning Statements for AC Systems Attention Lors de l'installation du produit, utilisez les bables de connection fournis ou désigné. L'utilisation d'autres cables et adaptateurs peut provoquer un dysfonctionnement ou un incendie.
4-20 S UPER S ERVER 1018D-73MTF User's Manual Notes.
Chapter 5: Advanced Motherboard Setup 5-1 Chapter 5 Advanced Motherboard Setup Th is ch apter c overs t he ste ps re qui red to i nst all p ro ce ss or s and h eat sin ks to th e X10SL7-F mot her b oar d, c onn ec t the d ata a nd po wer c ab les a nd ins ta ll add - on c ard s.
5-2 S UPER S ERVER 1018D-73MTF User's Manual 5-2 Processor and Heatsink Installation W arning: When handling the processor package, avoid placing direct pressure on the label area of the fan. Notes: • Always connect the power cord last and always remove it before adding, re- moving or changing any hardware components.
Chapter 5: Advanced Motherboard Setup 5-3 5. Align the CPU key , which is a semi- circle cutout, against the socket key , which is the notch below the gold color dot on the side of the socket. 6. Align pin 1 of the CPU against pin 1 of the CPU socket.
5-4 S UPER S ERVER 1018D-73MTF User's Manual 1. Remove power from the system and unplug the AC power cord from the power supply . 2. Do not apply any thermal grease to the heatsink or the CPU die; the required amount has already been applied.
Chapter 5: Advanced Motherboard Setup 5-5 5-3 Connecting Cables Now that the processors are installed, the next step is to connect the cables to the motherboard. These include the data (ribbon) cables for the peripherals and control panel and the power cables.
5-6 S UPER S ERVER 1018D-73MTF User's Manual Figure 5-2. Front Control Panel Header Pins (JF1) 5-4 I/O Ports The I/O ports are color coded in conformance with the PC 99 speci fi cation. See Figure 5-3 below for the colors and locations of the various I/O ports.
Chapter 5: Advanced Motherboard Setup 5-7 5-5 Installing Memory Note: Check the Supermicro web site for recommended memory modules. CAUTI O N E x e r c i s e e xt r e m e ca r e w h e n i n s ta l l i n g o r r e m o v i n g D I MM m o d u l es to pr event any po ss ibl e dam age.
5-8 S UPER S ERVER 1018D-73MTF User's Manual Memory Population Guidelines Please follow the table below when populating the X 10S L 7 - F . DDR3 Unbuffered ECC (UDIMM) Memory DIMM Slots per Chann.
Chapter 5: Advanced Motherboard Setup 5-9 5-6 Adding PCI Cards PCI Expansion Slots One riser card is used to support a PCI expansion (add-on) card in the system. The SC1 13MTQ chassis can accommodate one standard size (full height full length) PCI expansion card.
5-10 S UPER S ERVER 1018D-73MTF User's Manual Figure 5-5. SUPER X10SL7-F Layout 5-7 Motherboard Details IPMI CODE SAS CODE BIOS LICENSE BAR CODE MAC CODE FA N2 FA N3 FA N1 FA N4 FA NA JBR1 JPL2 J.
Chapter 5: Advanced Motherboard Setup 5-1 1 Connector Description COM1/COM2 COM1 (Port)/COM2 (Header) Fan1 - Fan4, FanA System/CPU Fan Headers JF1 Front Panel Control Header JL1 Chassis Intrusion Head.
5-12 S UPER S ERVER 1018D-73MTF User's Manual 5-8 Connector De fi nitions Processor Power Pin De fi nitions (JPW2/JPW3) Pins De fi nition 1 through 4 Ground 5 through 8 +12V A TX Power 24-pin Connector Pin De fi nitions (JPW1) Pin# De fi nition Pin # De fi nition 13 +3.
Chapter 5: Advanced Motherboard Setup 5-13 NIC1/NIC2 (LAN1/LAN2) The NIC (Network Interface Controller) LED connection for LAN port 1 is located on pins 1 1 and 12 of JF1, and the LED connection for LAN Port 2 is on pins 9 and 10. Attach NIC LED cables to NIC1 LED and NIC2 LED to display network activities for LAN 1 and LAN2.
5-14 S UPER S ERVER 1018D-73MTF User's Manual Power Button The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both pins will power on/off the system. This button can also be con fi g- ured to function as a suspend button (see BIOS Setup).
Chapter 5: Advanced Motherboard Setup 5-15 Fan Header Pin De fi nitions Pin# De fi nition 1 Ground (Black) 2 2.5A/+12V (Red) 3 T achometer 4 PWM_Control Fan Headers The X10SL7-F has fi ve fan headers (Fan1 - Fan4 and FanA). These are all 4-pin fan headers, however pins 1-3 are backward compatible with traditional 3-pin fans.
5-16 S UPER S ERVER 1018D-73MTF User's Manual DOM PWR Connector The Disk-On-Module (DOM) power con- nector (JSD1) provides 5V power to a solid state DOM storage device con- nected to one of the SA T A ports. See the table on the right for pin de fi nitions.
Chapter 5: Advanced Motherboard Setup 5-17 Ethernet Ports T wo Gigabit Ethernet ports (LAN1/2) are located on the I/O backplane on the motherboard to provide internet con- nections. In addition, a dedicated IPMI LAN port is included located above the USB ports on the backplane to provide KVM support for IPMI 2.
5-18 S UPER S ERVER 1018D-73MTF User's Manual Internal Buzzer (SP1) The Internal Buzzer (SPKR1) can be used to provide audible indications for various beep codes. See the table on the right for pin de fi nitions. Internal Buzzer Pin De fi nition Pin# De fi nitions Pin 1 Pos.
Chapter 5: Advanced Motherboard Setup 5-19 5-9 Jumper Settings Explanation of Jumpers T o modify the operation of the mother- board, jumpers can be used to choose between optional settings. Jumpers cre- ate shorts between two pins to change the function of the connector .
5-20 S UPER S ERVER 1018D-73MTF User's Manual LAN Port Enable/Disable Use J PL 1 / JPL 2 to e nab le o r dis ab le L A N Por ts 1 an d 2 on t he mot he rb oa rd. Se e th e ta ble o n th e ri ght f or ju mpe r set t ing s. Th e defa ult s et tin g is en abl ed.
Chapter 5: Advanced Motherboard Setup 5-21 Manufacturer Mode Select Close this jumper (JPME2) to bypass SPI fl ash security and force the system to use the Manufacturer mode which will allow the user to fl ash the system fi rmware from a host server to modify system settings.
5-22 S UPER S ERVER 1018D-73MTF User's Manual 5-10 Onboard Indicators LAN1/LAN2 LEDs The Ethernet ports (located beside the VGA port) have two LEDs. On each Giga- bit LAN port, the yellow LED indicates activity when blinking while the other LED may be green, amber or off to indicate the speed of the connection.
Chapter 5: Advanced Motherboard Setup 5-23 5-1 1 SAS/SA T A Ports SAS/SA T A Port Pin De fi nitions Pin # De fi nition 1 Ground 2 TXP 3 TXN 4 Ground 5 RXN 6 RXP 7 Ground SAS Heartbeat LED Status (LE.
5-24 S UPER S ERVER 1018D-73MTF User's Manual Figure 5-6. Driver Installation Display Screen 5-12 Installing Software The Supermicro ftp site contains drivers and utilities for your system at ftp://ftp. supermicro.com . Some of these must be installed, such as the chipset driver .
Chapter 5: Advanced Motherboard Setup 5-25 SuperDoctor III The SuperDoctor® III program is a web-based management tool that supports remote management capability . It includes Remote and Local Management tools. The local management is called SD III Client.
5-26 S UPER S ERVER 1018D-73MTF User's Manual 5-13 Onboard Battery Please handle used batteries carefully . Do not damage the battery in any way; a damaged battery may release hazardous materials into the environment. Do not discard a used battery in the garbage or a public land fi ll.
Chapter 6: Advanced Chassis Setup 6-1 Chapter 6 Advanced Chassis Setup This chapter covers the steps required to install components and perform main- tenance on the SC1 13MTQ-330CB chassis. For component installation, follow the steps in the order given to eliminate the most common problems encountered.
6-2 S UPER S ERVER 1018D-73MTF User's Manual Figure 6-1. Chassis: Front and Rear Views 6-2 Control Panel The control panel (located on the front of the chassis) must be connected to the JF1 connector on the motherboard to provide you with system status indications.
Chapter 6: Advanced Chassis Setup 6-3 Adding a System Fan 1. T urn off the power to the system and unplug the power cord. 2. Remove the chassis cover then remove the dummy fan from the fan tray .
6-4 S UPER S ERVER 1018D-73MTF User's Manual 6-4 Drive Bay Installation/Removal Accessing the Drive Bays Hard Drives: Because of their hotswap capability , you do not need to access the inside of the chassis or power down the system to install or replace hard drives.
Chapter 6: Advanced Chassis Setup 6-5 2. Align the drive in the carrier so that the screw holes of both line up. Note that there are holes in the carrier marked “SA T A” to aid in correct installation. 3. Secure the drive to the carrier with four screws as illustrated below .
6-6 S UPER S ERVER 1018D-73MTF User's Manual Figure 6-4. Removing a Hard Drive 1 1 1 2 DVD Drive Installation The SC1 13MTQ chassis may have a DVD-ROM installed (optional). Installing or Replacing a DVD-ROM Drive (Figure 6-5) 1. Power down the system and if necessary , remove the server from the rack and the front bezel from the chassis.
Chapter 6: Advanced Chassis Setup 6-7 Figure 6-5. Installing a DVD-ROM Drive.
6-8 S UPER S ERVER 1018D-73MTF User's Manual 6-5 Power Supply The SuperServer 1018D-73MTF has a single 330 watt power supply , which is auto- switching capable. This enables it to automatically sense and operate with a 100V to 240V input voltage.
Chapter 6: Advanced Chassis Setup 6-9 Figure 6-6. Removing/Replacing the Power Supply.
6-10 S UPER S ERVER 1018D-73MTF User's Manual Notes.
Chapter 7: BIOS 7-1 Chapter 7 BIOS 7-1 Introduction This chapter describes the AMI BIOS Setup Utility for the X10SL7-F . The ROM BIOS is stored in a Flash EEPROM and can be easily updated. This chapter describes the basic navigation of the AMI BIOS Setup Utility setup screens.
7-2 S UPER S ERVER 1018D-73MTF User's Manual How to Start the Setup Utility Normally , the only visible Power-On Self-T est (POST) routine is the memory test. As the memory is being tested, press the <Delete> key to enter the main menu of the AMI BIOS Setup Utility .
Chapter 7: BIOS 7-3 The following Main menu items will display: System Time/System Date Use this option to change the system date and time. Highlight System Date or System Time using the arrow keys. Enter new values through the keyboard. Press the <T ab> key or the arrow keys to move between fi elds.
7-4 S UPER S ERVER 1018D-73MTF User's Manual 7-3 Advanced Setup Con fi gurations Use the arrow keys to select Boot Setup and press <Enter> to access the submenu items: W arning : T ake Caution when changing the Advanced settings.
Chapter 7: BIOS 7-5 W ait For 'F1' If Error This feature fo rc es t he syste m to wai t unti l the ' F 1' ke y is p re ss ed if a n er ro r oc - cu rs . The o pti ons a re D isa bl ed an d Enabled . Interrupt 19 Capture Interrupt 19 is the software interrupt that handles the boot disk function.
7-6 S UPER S ERVER 1018D-73MTF User's Manual CPU Con fi guration The following CPU information will be displayed: • T ype of CPU • CPU Signature • Microcode Patch • Max (Maximum) CPU.
Chapter 7: BIOS 7-7 Hyper-threading Select Enabled to support Intel Hyper-threading T echnology to enhance CPU per- formance. The options are Enabled and Disabled. Active Processor Cores This feature determines how many CPU cores will be activated for each CPU.
7-8 S UPER S ERVER 1018D-73MTF User's Manual CPU AES Select Enable to enable Intel CPU Advanced Encryption Standard (AES) Instruc- tions for CPU to enhance data integrity .
Chapter 7: BIOS 7-9 1-Core Ratio Limit (A vailable when "T urbo Mode" is set to Enabled) This increases (multiplies) 1 clock speed in the CPU core in relation to the bus speed when one CPU core is active. Press "+" or "-" on your keyboard to change the value.
7-10 S UPER S ERVER 1018D-73MTF User's Manual CPU C3 Report (A vailable when "CPU C-States" is set to Enabled) Select Enabled to allow the BIOS to report the CPU C3 State (ACPI C2) to the operating system. During the CPU C3 State, the CPU clock generator is turned off.
Chapter 7: BIOS 7-1 1 Package C-State limit Select Auto for the AMI BIOS to automatically set the limit on the C-State package register . The options are C0/C1, C2, C3, C6, C7 and Auto . Chipset Con fi guration W arning! Setting the wrong values in the following sections may cause the system to malfunction.
7-12 S UPER S ERVER 1018D-73MTF User's Manual Primary PCIE (PCI-Express Device) This feature allows the user to specify which graphics card to be used as the primary graphics card. The options are PCIE1, PCIE2, PCIE3, PCIE4, PCIE5 , PCIE6, PCIE7 and Auto.
Chapter 7: BIOS 7-13 Memory Con fi guration This item displays the information on the memory modules installed on the motherboard. • Memory RC V ersion • Memory Frequency • T otal Memory .
7-14 S UPER S ERVER 1018D-73MTF User's Manual Memory Scrambler This feature enables or disables memory scrambler support for memory error correction. The settings are Enabled and Disabled. PCH-IO Con fi guration This item displays the information for PCH-IO Chip.
Chapter 7: BIOS 7-15 EHCI Hand-Off This item is for Operating Systems that do not support Enhanced Host Controller Interface (EHCI) hand-off. When this item is enabled, EHCI ownership change will be claimed by the EHCI driver . The settings are Enabled and Disabled .
7-16 S UPER S ERVER 1018D-73MTF User's Manual Port 0 ~ Port 1 SA T A Device T ype This feature con fi gures the selected SA T A port to support either a solid state drive or hard disk drive.
Chapter 7: BIOS 7-17 PCIe/PCI/PnP Con fi guration This feature allows the user to set the PCI/PnP con fi gurations for the following items: Above 4G Decoding Se lec t Ena bl ed fo r 6 4 - bi t devi c es to b e dec o de d above t he 4 GB a ddr es s spac e If 6 4bit P CI dec odin g is sup po r ted by the sy stem.
7-18 S UPER S ERVER 1018D-73MTF User's Manual Onboard LAN1/LAN2 Option ROM Se lec t iSC SI to us e th e iSC SI Opt io n ROM to b oot the c omp uter u sin g an iSC SI devi ce in sta lled i n a L AN p or t spe ci fi ed.
Chapter 7: BIOS 7-19 Intel Server Platform Services Con fi guration The following status information for this motherboard are displayed: • ME (Management Engine) BIOS Interface V ersion • SPS.
7-20 S UPER S ERVER 1018D-73MTF User's Manual Pending Operation Use this item to schedule a TPM-related operation to be performed by a security device for TPM support. The options are None , Enable T ake Ownership, Disable T ake Ownership, and TPM Clear .
Chapter 7: BIOS 7-21 Serial Port Console Redirection COM1/COM2 Use this feature to enable console redirection for COM1 and COM2 ports. The op- tions are Enabled and Disabled.
7-22 S UPER S ERVER 1018D-73MTF User's Manual Flow Control This feature allows the user to set the fl ow control for Console Redirection to prevent data loss caused by buffer over fl ow . Send a "Stop" signal to stop send- ing data when the receiving buffer is full.
Chapter 7: BIOS 7-23 Console Redirection Settings (for EMS) This feature allows the user to specify how the host computer will exchange data with the client computer , which is the remote computer used by the user .
7-24 S UPER S ERVER 1018D-73MTF User's Manual H/W (Hardware) Monitor PC Health Status Fan Speed Control Mode This feature allows the user to decide how the system controls the speeds of the onboard fans. The CPU temperature and the fan speed are correlative.
Chapter 7: BIOS 7-25 7-4 Event Logs Change SMBIOS Event Log Settings Enabling/Disabling Options SMBIOS Event Log Change this item to enable or disable all features of the SMBIOS Event Logging during system boot. The options are Enabled and Disabled.
7-26 S UPER S ERVER 1018D-73MTF User's Manual MECI The Multiple Event Count Increment (MECI) counter counts the number of oc- curences a duplicate event must happen before the MECI counter is incremented. This is a numeric value. The default value is 1 .
Chapter 7: BIOS 7-27 7-5 IPMI The following IPMI information will be displayed: • IPMI Firmware Revision • IPMI Status System Event Log This feature is used to change the System Event Log (SEL) con fi guration. SEL Components - Change this item to enable or disable all features of System Event Logging.
7-28 S UPER S ERVER 1018D-73MTF User's Manual BMC Network Con fi guration LAN Channel 1 : This feature allows the user to con fi gure the settings for LAN1 Port. Update IPMI LAN Con fi guration This feature allows the BIOS to implement any IP/MAC address changes at the next system boot.
Chapter 7: BIOS 7-29 7-6 Boot Settings Use t his fe ature t o co n fi gure Boot Settings: Set Boot Priority This option prioritizes the order of bootable devices that the system to boot from. Press [ENTER] on each entry from top to bottom to select devices.
7-30 S UPER S ERVER 1018D-73MTF User's Manual Delete Boot Option Use this feature to remove a pre-de fi ned boot device from which the system will boot during startup.
Chapter 7: BIOS 7-31 7-7 Security Settings T h i s m e n u a l l o w s t h e u s e r t o c o n fi gure the following security settings for the syst em. • If the Administrator password is de fi ned ONL Y - this controls access to the BIOS setup ONL Y .
7-32 S UPER S ERVER 1018D-73MTF User's Manual 7-8 Save & Exit Select the Exit tab from the BIOS Setup Utility screen to enter the Exit BIOS Setup screen. Discard Changes and Exit Select this option to quit the BIOS Setup without making any permanent changes to the system con fi guration, and reboot the computer .
Chapter 7: BIOS 7-33 Restore Optimized Defaults T o set this feature, select Restore Defaults from the Exit menu and press <Enter>. These are factory settings designed for maximum system stability , but not for maximum performance.
7-34 S UPER S ERVER 1018D-73MTF User's Manual Notes.
Appendix A: POST Error Beep Codes A-1 Appendix A POST Error Beep Codes During the POST (Power-On Self-T est) routines, which are performed each time the system is powered on, errors may occur . Non-fatal errors are those which, in most cases, allow the system to continue with bootup.
A-2 S UPER S ERVER 1018D-73MTF User's Manual Notes.
B-1 Appendix B: System Speci fi cations Appendix B System Speci fi cations Processors Single Intel ® Xeon ® E3-1200 v3 or a 4th Generation Core i3/ i5/ i7 processor in an LGA1 150 socket No te: Ple ase r efe r to our w eb si te fo r a com pl ete li sti ng of su ppo r ted p roc es so rs.
B-2 S UPER S ERVER 1018D-73MTF User's Manual Chassis SC1 13MTQ Form Factor: 1U rackmount Dimensions: (WxHxD) 17.2 x 1.7 x 19.85 in. (437 x 43 x 504 mm) Weight Gross Weight: 30 lbs. (13.6 kg.) System Cooling Four 4-cm counter-rotating PWM fans System Input Requirements AC Input V oltage: 100-240V AC auto-range Rated Input Current: 6.
B-3 Appendix B: System Speci fi cations Disclaimer (continued from front) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear.
B-4 S UPER S ERVER 1018D-73MTF User's Manual Notes.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il SUPER MICRO Computer 1018D-73MTF è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del SUPER MICRO Computer 1018D-73MTF - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso SUPER MICRO Computer 1018D-73MTF imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul SUPER MICRO Computer 1018D-73MTF ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il SUPER MICRO Computer 1018D-73MTF, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del SUPER MICRO Computer 1018D-73MTF.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il SUPER MICRO Computer 1018D-73MTF. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo SUPER MICRO Computer 1018D-73MTF insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
