Manuale d’uso / di manutenzione del prodotto IW12 del fabbricante Stanley Black & Decker
Vai alla pagina of 22
USER MANUAL Safety , Operation and Maintenance IW12 HYDRAULIC IMP ACT WRENCH © 2014 Stanley Black & Decker , Inc. New Britain, CT 06053 U.S.A. 66023 7/2014 V er .
2 ► IW12 User Manual DECLARATION OF CONF ORMI TY ÜBEREINSTIMM UNGS - ERKLARUNG DECLARATION DE CONFOR MITE CEE DECLARACION DE CONFO RMIDAD DICHIARAZIONE DI CONFORM ITA Hydraulic Tools _______ ______.
IW12 User Manual ◄ 3 DECLARA TION OF CONFORMITY .......................................................................................................................... 2 SAFETY SYMBOLS .............................................................
4 ► IW12 User Manual Always observe safety symbols. They are included for your safety and for the protection of the tool. LOCAL SAFETY REGULA TIONS Enter any local safety regulations here. Keep these instructions in an area accessible to the operator and mainte- nance personnel.
IW12 User Manual ◄ 5 T ool operators and maintenance personnel must always comply with the safety precautions given in this manual and on the stickers and tags attached to the tool and hose. These safety precautions are given for your safe- ty . Review them carefully before operating the tool and before performing general maintenance or repairs.
6 ► IW12 User Manual The safety tag (P/N 15875) at right is attached to the tool when shipped from the factory . Read and understand the safety instructions listed on this tag before removal. We suggest you retain this tag and attach it to the tool when not in use.
IW12 User Manual ◄ 7 The rated working pressure of the hydraulic hose must be equal to or higher than the relief valve setting on the hy- draulic system. There are three types of hydraulic hose that meet this requirement and are authorized for use with Stanley Hydraulic T ools.
8 ► IW12 User Manual Oil Flow Hose Lengths Inside Diameter USE ( Press/Return) Min. Working Pressure GPM LPM FEET METERS INCH MM PSI BAR Certied Non-Conductive Hose - Fiber Braid - for Utility Bu.
IW12 User Manual ◄ 9 Flow Range Nominal Operating Pressure (at the power supply outlet) System relief valve setting (at the power supply outlet) Maximum back pressure (at tool end of the return hose) Measured at a max. uid viscosity of: (at min. operating temperature) T emperature: Sufcient heat rejection capacity to limit max.
10 ► IW12 User Manual WRENCH T ORQUE INFORMA TION F ACT ORS THA T AFFECT TORQUE An impact wrench is a rotary hammer that impacts the head of a bolt or nut. It does not apply a slow steady torque as a standard torque wrench. Therefore, sever- al factors affect the result of torque when using impact wrenches: 1.
IW12 User Manual ◄ 1 1 POST OPERA TION UNDERW A TER MODELS ONL Y The wrench impact mechanism must be cleaned and greased with waterproof grease after every day of use. The main housing valve and motor are sealed and do not require maintenance unless they are malfunctioning.
12 ► IW12 User Manual • Make sure all couplers are wiped clean before con- nection. • The hydraulic circuit control valve must be in the “OFF” position when coupling or uncoupling hydrau- lic tools. Failure to do so may result in damage to the quick couplers and cause overheating of the hy- draulic system.
IW12 User Manual ◄ 13 If symptoms of poor performance develop, the following chart can be used as a guide to correct the problem. When diagnosing faults in operation of the wrench, always check that the hydraulic power source is supplying the correct hydraulic ow and pressure to the tool as listed in the following table.
14 ► IW12 User Manual Drive Size ................................................................................... 3/4-inch Square Drive, 5/8-inch Hex Quick Change Weight ............................................................................
IW12 User Manual ◄ 15 IW12 STD IMP ACT MECHANISM ILLUSTRA TION Adapter Part Number 06790, used to adapt 3/4-inch Square Drive to 5/8-inch Hex Quick Change. Adapter P/N 01857, used to adapt 3/4-inch Square Drive to 3/4-inch 3-Jaw Jacobs Chuck. CLEAN, APPL Y 242 LOCTITE®, AND TORQUE (8) CAPSCREWS T O 28–30 FT LB / 37.
16 ► IW12 User Manual ITEM NO. P ART NO. QTY DESCRIPTION 1 07999 1 MAIN HOUSING ASSY – INCL ITEM 3 ALSO INCL BALL STOP 19454 AND STEEL BALL 51 185 NOT PICTURED 3 08014 2 DU BUSHING – GARLOCK 14D.
IW12 User Manual ◄ 17 HEA VY DUTY IMP ACT MECHANISM ILLUSTRA TION CLEAN, APPL Y 242 LOCTITE®, AND TORQUE (8) CAPSCREWS TO 28–30 FT LB / 37.9– 40.
18 ► IW12 User Manual ITEM NO. P ART NO. QTY DESCRIPTION 41 02685 4 CAPSCREW , 5/16-18 × 7/8 HEX SOCKET HD 42 08067 1 HAMMER 43 20257 1 HAMMER FRAME 44 08069 2 HAMMER PIN 45 22728 1 ANVIL – 3/4 IN. SQUARE DRIVE ST ANDARD 20263 1 ANVIL – 3/4 IN.
IW12 User Manual ◄ 19 ST ANDARD IMP ACT & HEA VY DUTY IMP ACT MECHANISMS IN DET AIL ST ANDARD MECHANISM HEA VY DUTY MECHANISM When ordering Impact Mechanism parts, rst determine which mechanism you have by visually inspecting the following two parts indicated by the arrows ( A : Hammer Case, B : Anvil).
20 ► IW12 User Manual For underwater hydraulic tools the applications are broken down into four quadrants depending on type of tool and method of operation. The types of tools are percussive and rotational, each with different characteristics allowing for dif- ferent depth operation.
IW12 User Manual ◄ 21 NOTES.
Stanley Hydraulic T ools 3810 SE Naef Road Milwaukie, Oregon 97267-5698 USA (503) 659-5660 / Fax (503) 652-1780 www .stanleyhydraulics.com.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Stanley Black & Decker IW12 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Stanley Black & Decker IW12 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Stanley Black & Decker IW12 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Stanley Black & Decker IW12 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Stanley Black & Decker IW12, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Stanley Black & Decker IW12.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Stanley Black & Decker IW12. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Stanley Black & Decker IW12 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
