Manuale d’uso / di manutenzione del prodotto DVR-16/IP del fabbricante Speco Technologies
Vai alla pagina of 46
16 CHANNEL NETWORK READY DVR DVR-16/IP User ’ s Manual.
1 Precautions z All the safety and operation instructions should be read before the DVR-16/IP is operated. z All the safety and operation instructions should be retained for future reference. z Comply with operating instruction and notice warning information.
2 CONTENT 1. Feat ures .................................................................................................................... .............. 5 2. DVR-16/IP Applicat ion.....................................................................
3 6.5.1.1 Day S tart Ti me/ Day S t op T ime ................................................................. 20 6.5.1.2 Day REC PPS/ Night RE C PPS ............................................................... 20 6.5.1.3 Day REC Quality/ Night REC Quality.
4 6.7.1 RS-485 ID Set Up ............................................................................................... 26 6.7.2 RS-485 Baud Ra te .............................................................................................. 26 6.7.3 Software Information .
5 1. Features z Powerful W avelet compression z Proprietary real time O.S. z Duplex operation: View live and playback video simultaneously z Support NTSC and P AL system z Programmable recording pi ct.
6 3. Quick Inst allation Guide The DVR-16/IP is equipped with a mobile rack, the HDD is hot-swapp able. Y ou can exchange the HDD when the HDD is full. The following figur es illustrate how to install HDD into the removable cartridge. Step1: Pull the active-handle outwards and unlock with the miniature key provided (Figure 1).
7 GOTO 1 M i n u t e 3 0 2 H o u r 2 0 3 D a y 2 1 4 M o n t h 1 1 5 Y e a r 0 2 5 Goto Begin 6 Goto End 7 Exit 4. Front Panel Introduction The DVR-16/IP front panel controls enable you to perform preset and programmable functions. The figures below show the available buttons on the front panels.
8 Sequence_1 Set Up 1 Pages 16 1 1 Page 8 2 Mode 0 12 Page 9 3 Timer 5 13 Page 10 4 Page 1 14 Page 1 1 5 Page 2 15 Page 12 6 Page 3 16 Page 13 7 Page 4 17 Page 14 8 Page 5 18 Page 15 9 Page 6 19 Page 16 10 Page 7 20 Exit MENU Press this button to enter OSD setup menu (the LED will be lit).
9 SET In multi-windows display mode, press this button to enter SET mode. The menu will appear with the cursor over the first window . Use DIRECTION buttons to move the cursor , then press the CHANNEL button to assign the camera directly . The cursor will move to next window automatically .
10 5. DVR-16/IP Menu T ree MAIN MENU 1 Event List 2 OSD / Timer 3 Monitor 4 Camera 5 Record 6 Event 7 Others 8 Save / Load Default 9 CD-RW 10 Engineer 11 E x i t O S D / T i m e r 2 1 Date / T ime 2 D.
11 Day / Night Switch 6-1 1 Day / Night SW Enable No 2 S w i t c h < O F F > Day 3 D e l a y F o r A c t i v e 60 4 Exit Event Response 6 -2 1 I n t e r n a l B u z z e r ON 2 Event Relay Output.
12 Save Installer Setting 8-2 1 Save / Load: No 2 Save / Load: Y es 3 Exit O t h e r s 7 1 R S - 4 8 5 I D S e t u p 2 2 4 2 RS-485 Baud Rate 9600 3 Softw are Information 4 HDD Information 5 Shutdown .
13 MAIN MENU 1 Event List 2 OSD / T imer 3 Monitor 4 Camera 5 Record 6 Event 7 Others 8 Save / Load Default 9 Engineer 10 Engineer 11 E x i t Event List 1 02/10/20 08:12:39 L16 2 02/10/22 12:38:21 A3 .
14 Monitor 1 B r i g h t n e s s 125IIIIIIII 2 Contrast 190IIIIIIII 3 S a t u r a t i o n 188IIIIIIII 4 Hue 133IIIIIIII 5 L i v e R e f r e s h R a t e A u t o 6 Screen Center Point 7 Screen H-Size 8 Ba ckground Color 2 9 Show Color Bar 10 Exit 6.2.4 Date/ T ime Position This item allows you to move current Date/ T i me Display to any position.
15 Camera 1 Configuration T able 1 2 Camera Detect 3 Camera T itle 4 T i t l e P o s i t i o n D e f a u l t 5 Exit 6.3.2 Live Refresch Rate This item allows you to setup the camera refresh rate on the Main monitor; use right/ left buttons to select “Fix” or “Auto”.
16 DSCP S peed Dome 1 R S - 4 8 5 I D S e t u p X X X 2 Zoom 3 Brightness 4 S e t P r e s e t P o i n t X X X 5 Enter S peed Dome Menu 6 Exit 6.4.1.1 Inst all This item allows you to install each channel on 1 Configuration T abl e1. Every channel is “installed” by default; you may uninst all any one of them manually .
17 CHIPER CRT .V9KRP 1 I D S e t u p 1 2 Zoom 3 Focus 4 Brightness 5 S e t P r e s e t P o i n t 1 6 Goto Preset Point 7 Set Group Dw ell 8 Go Preset Group 9 S top Preset Group 10 Exit PELCO S peed Do.
18 Goto Preset Point Press right/ left direction button to select the number of the wa nted preset point; then press Enter to go to the selected preset point. Set Group Dwell Press the right/ left direction button to choose a proper dwell time. Go Preset Group Press Enter to start sequencing.
19 Camera_1 ! ” # $ % & ( ) * + , _ . / 0 1 2 3 4 5 6 7 8 9 : : < > ? @ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z [ ] ^ _ ‘abcdefghijklmn o pqrstuvwxyz{|} ~ Record 1 Day / Nig.
20 Day / Night 1 D a y S t a r t T i m e 0 8 : 0 0 2 D a y S t o p T i m e 1 8 : 0 0 3 Day REC PPS 60 4 D a y R E C Q u a l i t y S u p e r 5 N i g h t R E C P P S 6 0 6 Night REC Qualit y Super 7 Exi.
21 6.5.3 REC Event Only Y ou are allowed to decide the s ituation DVR-16/IP st arts recording. If you select “OFF”, then DVR-16/IP will remain in recording mode all the time.
22 Event 1 Day / Night Switch 2 Event Response 3 Motion De tect 4 Alarm In 5 V i d e o L o s s D e t e c t D i s 6 A l a r m S e t / R e s e t S W E n 7 Release T ime 8 Clear Event List 9 Exit Day/ Night Switch 1 Day / Night SW Enable No 2 S w i t c h < O F F > D a y 3 D e l a y F o r A c t i v e 6 0 4 Exit 6.
23 Event Response 1 I n t e r n a l B u z z e r O N 2 E v e n t R e l a y O u t p u t O N 3 E v e n t L i s t ON 4 E v e n t F u l l S c r e e n O F F 5 C a l l E v e n t D i s p l a y O N 6 Resp onse Duration 10 7 A n y K e y T o S t o p ON 8 Exit 6.
24 Motion Dete ct 1 M o t i o n D e t e c t O F F 2 Configuration T able 2 3 Condition Set Up 4 Exit Camera_1 1 S e l e c t C a m e r a 1 2 Detect Area 3 Sensitivity 4 Exit ◎◎◎◎◎◎◎◎◎.
25 Alarm In 1 A l a r m I n D e t e c t O F F 2 Configuration T able 2 3 Exit Release T ime 1 M o t i o n R E S T i m e 2 2 V i d e o L o s s R E S T i m e 2 3 A l a r m I n R E S T i m e 10 4 Exit Clear Event List 1 Clear Event List: No 2 Clear Event List: Y es 3 Exit Motion Dete ct Threshold: Day Threshold: Night 6.
26 Others 1 R S - 4 8 5 I D S e t u p 2 2 4 2 RS- 485 Protocol 3 Software In formation 4 HDD Information 5 Shutdown 6 Exit Software Information 1 CPU Filename D6SE0100 2 FPGA Filename FPGA0505 3 Date .
27 Save/ Load Default 1 Load Installer Setting 2 Save Inst aller Setting 3 Load Factory Setting 4 Load Factory Password 5 Exit Load Installer Setti ng 1 Save/ Load: No 2 Save/ Load: Y es 3 Exit Engine.
28 Input Fields: 2623 Error Fields: 13 6.10.2 Disable Password This item allows you to enter the OSD menu without ent ering the p assword. Therefore, you can save a lot of time while setting the DVR. This item will be restored to the default setting “No” automatically after you power of f and on the DVR.
29 Format Disk 1 Format Hard Disk 1 2 Format Hard Disk 2 3 Exit Exit 1 Set Up Data: Save 2 Set Up Data: Cancel 3 Exit 6.10.6 Language This item allows you to select your native language. 6.10.7 Format Hard Disk This item allows you to forma t the HDDs.
30 7.2 Download the Sof tware T o process recorded video on your computer , you need to download DVR Windows application software first. Af ter Window AP has been installed, you can now connect the swappable HDD to your computer and proc ess the recorded video.
31 7. Playback Press this button to play the recor ded video, and press it again to pause. 8. Go to Begin Press this button to go to the first image of the recorded video. 9. Fast Rewind Press this button to play the recorded video in reverse direction.
32 8. DVR-16IP Remote Access of V ideo over the Web This section discusses the remote control ability of DVR-16/IP; it is an option al function. Users are able to access live and recoded video from remote site throu gh Internet with Ethernet port connected.
33 4. Direction buttons 4.1 If the “Pan/ T ilt” (che ck box) is enabled (default), these but tons are used to pan/ tilt the connected dome cameras.
34 9.1 Server Y ou can set the server settings in this menu. 9.1.1 General Users can set the general server settings here in this sub-menu (Figure 2). The MAC address will be detected and shown on the test box automatically .
35 9.1.3 System Choose “Save Changes” to save the m odifications you’ve made (Figure 4). 9.2 Netw ork This sub-menu is offered to set network setti ngs.
36 9.2.2 Dynamic DNS Configuration This sub-menu allows you to set the DDNS settings (Figure 6). 9.3 Video This sub-menu allows you to set the video quality and PPS (Picture Per Second) (Figure7). 10. GET ID Press this button to show the DVR-16/IP ID on the screen.
37 1 1. Password Each password cont ains 4 characters. If you want to enter DV R-16/IP menu or enter playback mode, you have to enter correct passw ord. Y ou need to key the password in the field then press “send” butt on before you enter DVR-16/IP menu or playback mode.
38 External I/O Port (37pin DSUB) Pin No. Definition Direction Pin No. Definition Direction 1 GND Power 20 Reserved Input 2 GND Power 21 Reset Alarm Input 3 GND Power 22 Day / Night output Output 4 GN.
39 RS-485 (RJ1 1) The default RS-485 port connector is RJ1 1 6P6C connector . RJ1 1 Cable 6P6C pin definition: Pin No. Definition Direction 1 - - 2 - Re served 3 GND Ground 4 DA (D +) I/O 5 DB (D − ) I/O 6 - - 10.
40 Appendix 1: Hard Disk Error Message Some messages will be shown on the scr een when the H.D.D. cannot operate. Message: HDD Detect T ime Out Symptom : The system checks H.D.D. but gets no response over 30 seconds Possible reason : H.D.D. power on failure Countermeasure : 1).
41 Appendix 2: Supported HDD The supported HDDs are listed as below: Brand Cap acit y Rot ation Speed Part Number Maxtor 40GB 5400 RPM 4D040k2 Maxtor 80GB 5400 RPM 4D080H4 Maxtor 80GB 7200 RPM D740X-6.
42 Appendix 3: RS-485 Command Set The texts of Dat a 0, 1 is in ASCII code format ( Normal Command ) Command OP_code Data 0,1 Note Channel select “01” ~ ”0G” Channel 1~16 Right “MR” Screen.
43 Appendix 4: Super MMX & Super MPX System Setup 1. MMX (Multiplexer-Matrix) Purpose: by using the call monitor output of the DVR-16/IP/multiplexer array to mimic (or emulate) a small matrix system, each one of the camera can be selected to be displayed on the system monitor .
44 MPX NO MPX ID Camera ID Remark 1 E0H, 224 01H – 10H, 1~16 Channel 1~16 of MPX #1 2 E1H, 225 1 1H – 20H, 17~32 3 E2H, 226 21H – 30H, 33~48 4 E3H, 227 31H – 40H, 49~64 5 E4H, 228 41H – 50H,.
45 Notice : (1) All Multiplexers shown in the diagram can be DVR-16/IPs. (2) Choose “Super MPX” from “System Monito r Setting” in keyboard’ s “System Setting” (3) All the device must be connected to the same RS485 bus, the RS485 ID for each device must be set up as indicated in the above table.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Speco Technologies DVR-16/IP è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Speco Technologies DVR-16/IP - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Speco Technologies DVR-16/IP imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Speco Technologies DVR-16/IP ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Speco Technologies DVR-16/IP, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Speco Technologies DVR-16/IP.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Speco Technologies DVR-16/IP. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Speco Technologies DVR-16/IP insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
