
Card slot SD/MMC memory card slot
General Operating temperature range: +5°— +40°C Humidity: 5 — 90% (no condensation) Dimensions (L x D x H): 18,8 x 19,2 x 5,7 cm Weight : approx. 1345 gr
This device is designed for the reception of FM/AM radio stations as well as for the playback of audio and MP3-CDs, MP3 data from USB data carriers and SD/MMC memory cards and also audio signals from external audio devices. In addition you can con- nect the car radio to a bluetooth mobile telephone and, with the microphone unit, you can use the car radio as hands free equipment. This device is intended for use only in private environments. It is not suitable for use in commercial or industrial areas.
This device complies with the basic requirements and other relevent regulations regarding con- formity to the automotive directive 2004/104 /EG and the directive R&TTE 99/5/EG.
Items supplied
- Car radio (incl. face plate) - Installation bracket (Attached) - Bezel frame (Attached) - Fixture plate (incl. securing material) - Remote control - 1 Battery CR2025, 3 V DC - Key for installation bracket - Case for face plate - Microphone unit with adhesive strip - Operating manual
Radio frequency range: Radio: FM (USW) : 87.5 - 108 MHZ AM (MW) : 522 – 1620 KHz Station memory slots: 18 FM (USW)
USB port USB 1.1 and 2.0 compatible data carrier
CE Conformity

Information regarding the handling of batteries The remote control for this device uses a battery. For the handling of batteries please observe the following:
Do not throw batteries into a fire. Do not re- charge the batteries.
Risk of explosion!

The device is fitted with a "Class 1 Laser".
PTY group f TA ("Traffic Announcement"):
Activate traffic radio station/ END-button g AF ("Alternative Frequency"): Alternative
Frequency search 1% Station button 6/next directory j Station button 5/previous directory 1& RDM/4: Random playback in the CD/MP3 operation mode, station button 4 l INT/3: Intro function in the CD/MP3 operation
Traffic safety is the number one priority. Only operate your car radio when the traffic situation allows. Familiarize yourself with the device be- fore driving. Acoustical signals from the police, fire service and other emergency services must be able to be heard inside the vehicle in good time. Therefore moderate the programme's volume during the journey.
mode, station button 3 1( RPT/2: Repeat function in the CD/MP3 operation mode, station button 2 2) Remote control sensor 2! PAU/1: Stop playback in the CD/MP3 operation mode, station button 1 2@ /: Title/Station search backwards/forwards 2# MU: Switch sound off/ACCEPT-button 2$ SCN/REC: Automatic station search/Record to a data carrier at the USB port or the SD/MMC card slot
Front panel (face plate) q BND/ENT: Select band range/confirm selection w POWER/DIM: Switch device on and off/dim display
Behind the face plate 2% OPEN : Eject disc 2^ Holder for the face plate 2& RESET: Reset the car radio 2* Anti theft LED 2( CD compartment's position LED 3) CD compartment
balance and fader settings/turn to set the value/volume t Display y Unlocking the face plate u DISP: Show display information i Card slot for SD/MMC cards o USB port a AUX IN: 3,5 mm stereo input socket for the con-
Connections, rear panel 3! ISO-Block connection B 3@ Automotive flat fuse 10 A 3# ISO-Block connection A 3$ Microphone unit socket 3% Bluetooth antenna 3^ Securing screw (incl. M5 nut and washer) 3& LINE OUT: Audio cinch output L/R for amplifier 3* Antenna connection for a DIN antenna plug
nection of an external audio device s A/PS: Automatic station saving
Traffic safety

Remote control 3( POWER/DIM: Switch device on and off/dim display illumination 4) END-button 4! /: Title/Station search backwards/forwards 4@ ACCEPT-button 4# VOL+/-: Volume increase/decrease 4$ INT/3: Intro function in the CD/MP3 operation mode, number button 3 4% PTY/7: ("Programme Type") Station search by PTY group/number button 7 4^ Number button 6 4& DSP/*: ("Digital Sound Processing") Sound settings/ button * 4* BAND/0: Select band range/number button 0 4( Battery compartment 5) SEL/#: Access settings for volume, bass, treble, balance and fader/ button # 5! TA/9: ("Traffic Announcement"): Activate traffic radio station/ number button 9 5@ AF/8: ("Alternative Frequency"): Alternative frequency search/ number button 8 5# Number button 5 5$ RDM/4: Random playback in the CD/MP3 operation mode/ number button 4 5% RPT/2: Repeat function in the CD/MP3 operation mode/ number button 2 5^ /1: Playback start or stop/ number button 1 5& MODE: Set operation mode/loudness function
If you want to install your car radio yourself follow the installation and connection instructions in this manual.
Microphone unit 5* green LED for connection status 5( TALK button 6) Microphone 6! Microphone unit plug
Make sure that a permanent positive connection is applied to the station memory of connection 6 in the ISO block A.
You can connect an external amplifier to the audio cinch output. For this follow the operating instructions for the external amplifier.
Case for face plate
Key for installation bracket
Installation bracket · Bezel frame I

Configuration of the ISO connections
1 2 3 4
4 12 V (Ignition positive) 5 unconfigured

1 Rear right +
2 Front right +
3 Front left +
1 2 3 4
4 Rear left +
5 Rear right -
6 Front right -
7 Front left -
8 Rear left -
Of course you can also only connect the car radio to two speakers. Then you only use the cable for the front speakers.
Problems because of cable interchanging
In a few vehicle models the standard configura- tion of the connections [4] and [6] in the ISO Block A (see above "Configuration of the ISO Blocks") is interchanged at the factory. If this is the case the station memory can be lost.
To correct this the connections 4 (Ignition positive) and 6 (Permanent positive) in the ISO Block A must be swapped.
Installing the radio into the ISO duct
Before installation remove, without fail, the two transport securing screws on the top of the radio housing (marked with a red sticker)!

For installation please use the car radio's ISO connections. The vehicle specific ISO adapter that you may possibly require can be obtained from a specialist establishment, from a local dealer or from the store's technical department. When using other connection types the warranty becomes void!
1 2 3 4
5 6 7 8
1 2 3 4
5 6 7 8
ISO A
Observe the cable positioning when pushing the radio in; it could become damaged.
The connection for the antenna power is available for a relay controlled antenna. The relay then automatically extends the antenna when the radio is switched on. When switched off the antenna retracts.
This connection can also be used to control an external amplifier. For exact connection informa- tion please consult the amplifier's operating in- structions.
Never attach the antenna power connection with the antenna's motor power cable; this can cause damage to the radio!
Make sure that for the station memory the per- manent positive is applied to the connection 6 in the ISO block A. Otherwise you will not be able to save any radio stations!


Remote control
Putting the face plate on • Place the face plate with the left side in the frame first. Then firmly press the right side until it locks into place.
Inserting the battery Remove the supplied battery from the packing. To insert the battery and/or change the battery proceed as follows:


When the face plate is not inserted into the frame the theft protection LED on the device blinks.
To safeguard the face plate always keep it stored in its case.

Loudness • Hold down the MD/LD button to switch the loudness function on or off.
Operation via the buttons on the device and on the remote control
Display • By pressing the DISP button you can switch the notices in the display around in the following manner:
Most of the functions can be operated by the buttons on the device as well as by the buttons on the remote control. In these instructions the buttons on the device are described. If the buttons on the remote control are meant this will be specifically mentioned.
With radio reception: Programme name, time of day (will automatically be set with RDS reception), PTY settings (these RDS functions are transmitted by the broardcast institu- tions in various extents; see also the chapter "Radio functions") and frequencies.
Approx. 5 seconds after a setting has been made the playback will again be displayed and the setting is saved.
In CD mode: Time of day, PTY settings and frequencies.
Switching On and Off Press briefly the POWER/DIM button to switch the radio on. In the display the notice WELCOME appears. • Briefly touch the POWER/DIM button to dim the dis- play illumination. To switch off hold down the POWER/DIM button longer.
If you do not receive any RDS or PTY information "PS NONE" or "PTY NONE" appears in the dis- play. Each notice only appears for a few seconds.
Setting the operating mode • Press the MD/LD button to switch between radio re- ception (frequency indicator), CD/MP3 operation (CD), card slot (SD/MMC), USB port (USB) and audio input (AUX).
Volume • Turn the multi controller to increase or decrease the volume.
The operating modes CD, SD/MMC and USB can only be accessed when the corresponding medium is inserted.
Always set the volume to a level that will allow you, at any time, to clearly hear acoustical signals from emergency service vehicles!
Basic operation

DSP - Equalizer • Turn the multi controller to select one of the set- tings DSP CLASSIC, DSP ROCK, DSP POP, DSP FLAT or DSP NONE. In the setting DSP NONE no Digital Sound Processing (DSP) is switched on. You can also set the equalizer by pressing the DSP button on the remote control. With this setting DSP is switched off when the radio frequency is shown again. The DSP equalizer setting is shown at the bottom of the display.
Settings for the multi controller Via the multi controller you can, in addition, admi- nister settings for the switch on volume, time of day settings, traffic radio volume, EON function, recor- ding format and the equalizer. • Hold down the multi controller for approx. 2 se- conds and then press it several times to access the following settings:
INVOL - switch on volume • Turn the multi controller in order to set a volume level, which will apply when the car radio is switched on.
ADJ - Time of day Your car radio is equipped with an RDS controlled clock. The clock sets itself automatically when the EON function is switched on and also continues to run when the radio is switched off. If you do not receive any RDS signal you can also set the time of day manually. • Turn the multi controller to the right to set the hours and to the left to set the minutes.
Selecting the band range • Press the BND/ENT button to switch between USW (FM1, FM2, FM3) and medium wave (MW1, MW2).
Automatic station search • Press briefly the search buttons or to start a search forwards/backwards. The search stops at the next station found.
TAVOL - Volume for traffic radio • Turn the multi controller in order to set a volume level, which will apply when the traffic report is switched on.
EON - Function Turn the multi controller in order to switch the EON function on (EON ON) or off (EON OFF). When the EON function is switched on the radio switches to traffic radio or PTY types if the TA or PTY function has been switched on.
REC - Recording format • Turn the multi controller to set the record format for recording on SD/MMC and/or USB data carriers, MP3 (MP3 data) or WMA (Windows Media Audio).

PTY (Programme Type Code Program-
Setting the PTY identification • Hold down the PTY button and then turn the multi controller to set the individual PTY identifications.
Station search by PTY identification • During the display of a PTY identification if you press briefly the PTY button or the buttons / a search immediately starts for stations, which correspond to this PTY identification. If no station is found that corresponds to this PTY identification the notice NOT FND appears briefly and then the search ends with the last set station.
Alternative Frequency (AF) You can search for alternative frequencies of a station so that it will always have optimal reception.

TA ("Traffic Announcement") - TRAFFIC RADIO For this function the EON function must be switched on. • Press the TA button briefly to switch this mode on or off. In the TA mode the device will immediately switch from other stations or operation types to the radio station, which is currently broadcasting traffic infor- mation. With this the volume level entered under TAVOL will be set. The TA function can be stopped during the play- back of traffic information, without switching off the TA mode, by pressing the TA button again.
1 NEWS News 2 AFFAIRS Politics & current events
3 INFO Special word programmes
4 SPORT Sport 5 EDUCATE Study & further education
6 DRAMA Radio play & literature 7 CULTURE Culture, church, social 8 SCIENCE Science 9 VARIED Conversational 10 POP M Pop music 11 ROCK M Rock music 12 EASY M Easy listening music 13 LIGHT M Light classical music 14 CLASSICS Serious classical music 15 OTHER M Special music programmes 16 WEATHER Weather 17 FINANCE Finance 18 CHILDREN Childrens programme 19 SOCIAL Social 20 RELIGION Religion 21 PHONE IN Caller broadcasts 22 TRAVEL Travel 23 LEISURE Leisure 24 JAZZ Jazz music 25 COUNTRY Country music 26 NATION M National music 27 OLDIES Oldies music 28 FOLK M Folk music 29 DOCUMENT Documentaries 30 TEST Display indicator "Alarm Test" 31 ALARM Alarm reports
ASP "Anti shock protection"
The device is equipped with an anti shock function. This function serves to compensate for vibrations, for example on uneven streets, and to provide an uninterupted playback even with device movement. When the device is switched on the memory automatically fills with data:
– with audio CDs for 10 seconds;
– with MP3-CDs for 120 seconds.
Please note that this information is dependent on the region, the broadcasting corporation and the station.
Further information for CD operation
Dampness and high humidity can cause the CD player to malfunction. In this case switch on the vehicle heating to dissipate the dampness before using the device. Do not subject the CD player to any extreemly high or low temperatures.
PTY identification · PTY indicator Contents

Title sampling • Press the INT/3 button. In the display INT will be shown. Appox. 10 seconds from all titles will playback one after the other. A repeat pressing launches the normal playback.
Do not drive with an ejected CD. Immediately remove the CD from the CD slot. If an ejected CD is not removed within approx. 5 seconds the device will draw it back in, however playback of the CD will not start.
Random playback of all titles • Press the RDM/4 button. In the display RDM is shown. A random controlled playback is started. A repeat pressing launches the normal playback.
Title skip • By means of the button or you can select the next and/or the previous title. The title number will be shown in the display.
The basic functions correspond to those of the audio CDs (see previous chapter). However with MP3-CDs you can select the titles and the interpreters directly. These functions and the other MP3 specific functions are definitivly dependent on the MP3-CD. Please bear this in mind when creating these CDs (see the next section). All conventional codings can be played back. TITLE > INTERPRET > ALBUM NAME > RELEASE YEAR > COMMENTARY.
Fast forward/backward • Hold down the buttons or longer to start fast forward or backward.
Stopping a CD • You can stop the playback with the PAU/1 button. To continue playback press the PAU/1 button once more.
Repeating a title • Press the RPT/2 button. In the display RPT ONE is shown and then RPT. The current title is repeated. A repeat pressing launches the normal playback (the entire disc is repeated). RPT ALL appears briefly in the display.
MP3-CDs like data CDs can contain individual titles or directories. Please bear in mind with the creation of an MP3-CD that you do not save titles on the same level as directories but rather only in the directory.

A mixture of titles and directories on the same level can result in problems when playing back.
With the creation of the MP3 file you can also save the so called "ID3 tag" (for input we recom- mend an ID3 tag editor). This is a block of infor- mation that is contained in the MP3 file. This can be, for example, information about the inter- preters, titles, album name, release year and a short commentary. The car radio can read this block of information and show it in the display.
Title search (by numbers)
Playback of the previous/next directory • Press the station button 6 to playback the next directory and/or the station button 5 to playback the previous directory.
The device can also play WMA files. The opera- tion functions exactly the same as for MP3 files.
Search for directories · WMA files

Record function
Please observe the legal regulations valid in your place of residence regarding the duplica- tion of copyrighted works. In case of doubt please consult a specialist in your area.
Your car radio is equipped with a memory card slot for SD and Multimedia cards.
When the USB data carrier is full the recording automatically switches to the card reader, so long as a memory card is inserted (see the fol- lowing chapter).

You can play the data again by switching to the USB or SD/MMC mode with the MD/LD button and then accessing the corresponding title from the data carrier.
Information regarding the recorded data
The recording will be saved to the data carrier with the following notations:
Audio CD recordings: Track01, Track02 ... MP3-CD recordings: Music01, Music02 ... Radio recordings: Tuner01, Tuner02 ...
Audio CD and radio recordings are recorded in stereo and with a bitrate of 128 kbps and/or a sampling frequency of 44 kHz. When copying MP3 files the recording format of the copy source will be adopted.
Connection • Connect the microphone unit to the car radio as described under "Connection/Connection sche- matics". To use the microphone unit you need a mobile tele- phone, which supports Bluetooth data transmissions.

Redial • Hold down the TALK button on the microphone unit or the ACCEPT button on the remote con- trol and/or on the front panel for approx. 2 se- conds. - If no call number was previously selected via the remote control's number buttons REDIAL appears briefly in the display and then the last number dialed from the mobile telephone will be dialed. - If one or more call numbers were already dialed via the remote control's number buttons REDIAL appears in the display. Turn the multi controller or press the VOL-/+ buttons on the remote control to show the last 10 dialed numbers one after the other. Press the ACCEPT button to dial the selected tele- phone number. Select the entry REDIAL and then press the END
button to end redial.
Audio streaming (A2DP) Your car radio uses the A2DP profile (Advanced Audio Distribution Profile) and therefore can play- back your mobile telephone's audio data. • Select an audio file from your mobile telephone and start the playback. The entry A2DP appears in the car radio's display and the audio file will playback via the car radio's speaker.
Rejecting a call • With an incoming call press, for longer than 2 seconds, the TALK button on the microphone unit or press the END button to reject the call.
On the mobile telephone it may possibly be necessary to switch playback via the Bluetooth stereo headset. For this read also, without fail, the operating in- structions for your mobile telephone. With a few mobile telephones the car radio does not automatically switch to the A2DP mode. In this case you switch to the A2DP mode by pressing the MD/LD button several times until the notice A2DP appears in the dis- play.
Operation

Failure with burnt CDs Check the burnt CD in another playback device.
Station memory is not functioning The connection 6 in the ISO block A (Permanent positive) is not connected correctly. • Check the cable connections. For this consult the chapter "Connections".
The device's USB port does not function The USB port is intended for devices that function according to the USB standard. Not all market avai- lable devices conform to this standard. It is possible that a device is connected that does not function according to the USB standard. • Connect a device that functions according to the USB standard.

The card reading device does not read the cards The card is possibly defective, dirty and not properly inserted. • Check the card. Slide it in with the inscribed side facing to the right.
Do not dispose of the device in your normal domestic waste. This product is subject to the European directive 2002/96/EG. Dispose of the device through an approved disposal centre or at your community waste facility. Observe the currently applicable regulations. In case of doubt, please contact your waste disposal centre.
The Bluetooth connection does not function The mobile telephone does not support Bluetooth transmissions. The mobile telephone is not coupled with the car radio. • Reconnect the mobile telephone and the car radio. For this also read, without fail, your mobile tele- phone's instructions.
Disposal of batteries/rechargeable batteries Used batteries/rechargeable batteries may not be dis- posed of in household waste. Every consumer is le- gally obligated to dispose of batteries at a collection site in his community / city district or at a retail store. The purpose of this obligation is to ensure that batte- ries are disposed of in a non-polluting manner. Only dispose of batteries when they are fully discharged.
Dispose of all packaging materials in an environmentally friendly manner.
Moisture penetrating into the device creates the risk of electric shock! Besides which, the device could become irreparably damaged!

Importer
The warranty provisions cover only material or factory defects. The warranty is not valid;
This product is for private use only and is not intended for commercial use. In the event of misuse and im- proper handling, use of force and interference not carried out by our authorized service branch, the warranty will become void. Your statutory warranty claims are not restricted by this warranty.





DES Ltd Tel.: 0870/787-6177 Fax:0870/787-6168 e-mail: support.uk@kompernass.com
In order to guarantee a cost free re- pair procedure please get in touch with the service hotline. Make sure you have your sales slip handy.
Sender, please write clearly:
Description of fault:


Pagine di riferimento in questo manuale: produttore, supporto e download.
I possessori del prodotto e il nostro team di solito rispondono entro 24 ore, e la tua domanda sarà utile anche ad altri.
Invia la prima domanda: risponderanno altri possessori o il nostro team.