


STD24B STD12B 6B BASIC/ENHANCED KEYSET USER GUIDE
SAMSUNG D I G I TAL COMMUNICATION SYSTEM
NOVEMBER 1995



Publication Information
Samsung Electronics reserve the right without prior notice to revise information in this publication for any re a s o n .
Samsung Electronics also reserve the right without prior notice to make changes in design or components of equipment as engineering and manufacturing may warrant.
All rights reserved. No part of this manual may be re p ro d u c e d in any form or by any means - graphic, electronic or mechanical, including re c o rding, taping, photocopying or information retrieval system - without express written permission of the publisher of this material.
N o v / 9 5









DCS telephones are called "keysets". They contain buttons or "ke y s " that are used to access or activate the many features of your off i c e phone system. The keys with paper designation strips are p rogrammable keys. This means they can be programmed for a specific function on your keyset and that same button can be something diff e rent on another keyset. See the system manager to get your most frequently used features assigned to your pro g r a m m a b l e keys. When changes are made, be sure that your programmable keys a re relabeled pro p e r l y.
Lines from the telephone company are "C.O. lines". Calls on these lines a re re f e r red to as "outside calls". Your system can have individual C.O. line keys or lines may be assigned to groups. When they are in a g roup, you access a line by dialing an access code or pressing a ro u t e button. For example: dial 9 or press the L O C A L key to get a local outside line. If Least Cost Routing is used, pressing the L C R key will automatically select a pre p rogrammed C.O. line according to what digits are dialed. Each line in the system is numbered, beginning with 701, then 702, 703, etc.
D i rect Station Selection (DSS) keys are programmed to ring specific stations. You can press a DSS key instead of dialing the extension n u m b e r. A DSS key will light red when that station is busy (Busy Lamp Indication).

The keys on your phone have light emitting diodes (LEDs). Some of these are tri-coloured LEDs that light green, red or amber (green and red together). Some of the keys can only light re d .
I n t e rcom calls, also called internal calls, always appear on your C A L L buttons. They will always light green. You can have up to eight C A L L buttons, but two are re c o m m e n d e d .
Outside calls appear on individual line keys if they are assigned. When an individual line is not assigned to its own key, it will appear on a CALL button. Your outside calls will light green on your keyset and red on other keysets.
You never lose sight of your calls while they are on hold. They stay right where you put them and are identified with a green flashing l i g h t .
P ressing the ANS/RLS key will answer or release a call on the speaker phone. Switching from the handset to the speakerphone is easy. Pre s s the SPK key and hang up the handset.

DCS keysets use the UP & DOWN keys to adjust the ringer volume while the keyset is ringing, the speaker volume while the speakerphone is in use and the handset volume while you are listening. These three levels will be stored in memory until changed. If b a c k a g round music is turned on at your keyset, the volume keys will also control the level of music. The volume of pages heard through the speaker of keyset can be adjusted during a page announcement by using the volume keys. There are 16 levels for each volume setting. The volume of off-hook ring is controlled by a user- p rogrammable setting.
The system provides several tones to assist you. Some of these tones a re already familiar to you.




Insert the end of a paper clip into the notch of the clear cover. Push the cover sideways. Lift the cover and remove the designation strip. Label the designation strip. Replace the strip and cover.
SOFTKEYS Used to activate feature via the display. 40
S C R O L LK E Y Used to scroll through displays.

16 PROGRAMMABLE KEYS WITH TRI-COLORED LIGHTS Used for CALL buttons, intercom calls and many other system features. VOLUME CONTROL KEYS Used to set independent levels for handset, speaker, background music, ring and page volumes.
MEMORY(SPEED DIAL) KEY
DO NOT DISTURB KEY SPEAKER KEY Used to switch call to speakerphone.
8 PROGRAMMABLE KEYS WITH RED LIGHTS Used to call stations directly, for One- Touch dialling and many other system features.
M I C R O P H O N E For handsfree operation.

Insert the end of a paper clip into the notch of the clear cover. Push the cover sideways. Lift the cover and remove the designation strip. Label the designation strip. Replace the strip and cover.
S C R O L LK E Y Used to scroll through displays.

8 PROGRAMMABLE KEYS WITH TRI-COLORED LIGHTS Used for CALL buttons, intercom calls and many other system features. VOLUME CONTROL KEYS Used to set independent levels for handset, speaker, background music, ring and page volumes.
MEMORY(SPEED DIAL) KEY
DO NOT DISTURB KEY
SPEAKER KEY Used to switch call to speakerphone. 4 PROGRAMMABLE KEYS WITH RED LIGHTS Used to call stations directly, for One- Touch dialling and many other system features.
M I C R O P H O N E For handsfree operation.

Insert the end of a paper clip into the notch of the clear cover. Push the cover sideways. Lift the cover and remove the designation strip. Label the designation strip. Replace the strip and cover.
16 PROGRAMMABLE KEYS WITH TRI-COLORED LIGHTS Used for CALLbuttons, intercom calls and many other system features. VOLUME CONTROL KEYS Used to set independent levels for handset, speaker, background music, ring and page volumes.

MEMORY(SPEED DIAL) KEY
DO NOT DISTURB KEY SPEAKER KEY Used to switch call to speakerphone.
8 PROGRAMMABLE KEYS WITH RED LIGHTS Used to call stations directly, for One- Touch dialling and many other system features.
TRANSFER KEY
M I C R O P H O N E For handsfree operation.
ANSWER/RELEASE KEY

Insert the end of a paper clip into the notch of the clear cover. Push the cover sideways. Lift the cover and remove the designation strip. Label the designation strip. Replace the strip and cover.
8 PROGRAMMABLE KEYS WITH TRI-COLORED LIGHTS Used for CALL buttons, intercom calls and many other system features. VOLUME CONTROL KEYS Used to set independent levels for handset, speaker, background music, ring and page volumes.

MEMORY(SPEED DIAL) KEY
DO NOT DISTURB KEY SPEAKER KEY Used to switch call to speakerphone. TRUNK FLASH KEY 4 PROGRAMMABLE KEYS WITH RED LIGHTS Used to call stations directly, for One- Touch dialling and many other system features.
TRANSFER KEY
M I C R O P H O N E F o r handsfree operation.
ANSWER/RELEASE KEY

Insert the end of a paper clip into the notch of the clear cover. Push the cover sideways. Lift the cover and remove the designation strip. Label the designation strip. Replace the strip and cover.


6 PROGRAMMABLE KEYS WITH RED-COLORED LIGHTS Used for CALL
buttons, intercom calls and many other system features.
VOLUME CONTROL KEYS Used to set independent levels for handset, speaker, background music, ring and page volumes. TRANSFER KEY
ON-HOOK KEY for the Basic Keyset SPEAKER KEY for the Enhanced Keyset HOLD KEY
MICOROPHONE for handfree operation. (Available only in the Enhanced Keyset) PULLOUT DIRECTORY TRAY



RED LED INDICATOR

make a call and there is no key available for that line.
For more information on authorization and account codes, see your system administrator.
lift the handset or press SPK b e f o re dialing.

p ress the flashing button to answer.
Outside lines can ring over the paging system or to a loud ringer. To answer calls ringing in night service to this device, dial 67 or press the UA k e y. This device can operate in the Day or Night mode.
lift the handset or press SPK b e f o re dialing.
P ress the NEW button to disconnect your existing call, wait for dial tone and then make a new call on the same line.
may be programmed to recall dial tone.
While on an outside call, press the FLASH key to send a flash to the telephone company. This is re q u i red for some custom calling feature s or CENTREX use.

If you receive a busy signal when you are selecting an outside line, this means that the line or group of lines is busy.
N O T E S :1. A callback will be canceled if not answered within 30
seconds. If you have set a call back, you CBK key will l i g h t . 2. If the Hot Keypad feature has been turned off, you must first lift the handset or press SPK b e f o re dialing.

N O T E S :1. If you have a DSS key assigned to an extension or station
g roup, you may press this key instead of dialing the n u m b e r. 2. If the Hot Keypad feature has been turned off, you must first lift the handset or press SPK b e f o re you begin dialing.
See Ring Pre f e rence under Customizing Your Keyset.

When you call another station and receive a busy signal:
N O T E S :1. A callback will be canceled if not answered within 30
seconds. If you have set a callback, your CBK key will light. 2. If the Hot Keypad feature has been turned off, you must first lift the handset or press SPK b e f o re dialing.
When you call another station and receive a busy signal but you do not want to wait for a callback:

N O T E S :1. If you receive No More Calls tone, that station has no
available key to accept your call. Hang up or leave a m e s s a g e . 2. If the Hot Keypad feature has been turned off, you must first lift the handset or press SPK b e f o re you begin dialing.
lift the handset or press SPK b e f o re you begin dialing.

CALL button will automatically put your first call on hold and connect you to the new call. See Automatic Hold u n d e r Customizing Your Keyset.
To place an outside call on hold at your phone so that other users cannot get it:
N O T E : I n t e rcom calls will always be placed on exclusive hold.

If you leave a call on hold longer than the hold timer, it will recall your station. The button that the call appears on will have a slow flashing amber light.
When you are talking on an outside line and it is necessary to consult with another extension:
outside and inside party and internal extension.
When a line is on hold and it appears on your keyset, press the line button with the red flashing light.
When a line is on hold and it does not appear on your keyset, dial 12 plus the line number or the extension number of the station that placed the call on hold.

lift the handset or press the SPK key before you begin dialing.
Transfer is used to send any call to another extension in one of two ways. You can do a screened transfer by informing the other extension who is calling or you can do a blind transfer without notification.
O R P ress a DSS key or station group key. Your call is automatically put on transfer hold. • Hang up when you hear ringing (this is an unscreened or blind t r a n s f e r ) .
O R • Wait for the called party to answer and advise him/her of the call and hang up. If the transfer is refused, you will be reconnected to the outside line when the called station hangs up or you can press TRSF to return to the outside party. If you wish to send the call to another extension without waiting for the fitst station to hang up, simply p ress another DSS button.
O R P ress the CALL button or C.O. line key to return to the outside party and begin the transfer press again.
When you are the transferring a call to a keyset set for Voice Announce or Auto Answer, the transferred call will always ring.
N O T E S :1. After the inside party answer, you may alternate back and
forth between the parties by pressing the TRSF k e y. 2. If you receive No More Calls tone, that station has no key available to receive another call. Press TRSF to return to the other party.

When your are transferring a call to another station and you receive a busy signal, you may camp the call on to this station. Simply hang up when you hear the busy signal. The called party will be alerted that a call is waiting for them.
available to receive another call. Press TRSF to return to the outside caller.
If an outside call has been camped on to your phone or another station has camped-on to you:
O R Finish the first call and hang up; the waiting call will ring. • Lift handset or press A N S / R L S key to answer.
N O T E : I n t e rcom calls will not go on Automatic Hold.
You may conference up to five parties (you and four others) in any combination of outside lines and internal stations in any ord e r.

you are not able to reach the desired person, hang up. Simply press the CONF key again to return to your pre v i o u s c o n v e r s a t i o n .
To drop a party from your conference call:
internal station. If there are no internal stations and you wish to leave outside lines connected together in a trunk to tru n k c o n f e rence, press the CONF key plus the CALL button that the call appears on or follow the instructions to drop a party and use your extension number. When they hang up, the lines will release automatically. Press CONF to rejoin a trunk to tru n k c o n f e re n c e .
You may forward your calls to another station, group of stations or an external telephone number. Program a destination for the type of f o r w a rding you want as detailed below. If you have FWD ALL, FWD B U S Y, and FWD NO ANSWER keys, press one to turn that forward f e a t u re on. A steady red light reminds you what forward condition is a c t i v a t e d .
You can clear all call forwards set at your station by lifting the handset and dialing 6 0 0.

To forward all your calls under any condition to another station:
N O T E S :1. If the Hot Keypad feature has been turned off, you must
first lift the handset or press SPK b e f o re you begin dialing. 2. The station that receives a Forwarded call can transfer the call back to the forwarding station. This is useful when you a re expecting an important call but you do not wish to be distributed by other calls. 3. When a station user places his/her keyset in Forward All mode and he/she does not have a FWD ALL k e y, the TRSF key will light to indicate Forward All has been set and calls to this station have been transferred elsewhere .
To forward calls to another station when you are on the phone:
lift the handset or press SPK b e f o re you begin dialing.
To forward calls to another station when you do not answer:
lift the handset or press SPK b e f o re you begin dialing.

If you have both a Forward on Busy destination and a Forward No Answer destination programmed, you may set both of these at the same:
lift the handset or press SPK b e f o re you begin dialing.
When you want all calls to your extension forwarded to the extension w h e re you are now:
If you want a specific extension's calls forwarded to your phone (Remote Call Forward ) :
lift the handset or press SPK b e f o re you begin dialing.
To forward outside calls to a number outside of your business, you must have a FWD EXTERNAL button on your keyset.

i n s t ru c t i o n s . 2. If the Hot Keypad feature has been turned off, you must first lift the handset or press SPK b e f o re you begin dialing.
To pick up (answer) a call ringing at another station, lift the handset and dial 65 plus the extension number of the ringing phone.
lift the handset or press SPK b e f o re you begin dialing
To pick up (answer) a call ringing in any pickup group, lift the handset and dial 66 plus the desired group number 01-20 or press the flashing GROUP PICKUP key if available.
N O T E S :1. A group pickup key can have an extender for a specific
pickup gro u p . 2. If the Hot Keypad feature has been turned off, you must first lift the handset or press SPK b e f o re dialing the access c o d e . 3. Station and group pickup features cannot be used to answer recalls to a station, only new ringing calls and operator re c a l l s .

You can dial a pre p rogrammed telephone number stored in the system-wide speed dial list of numbers 500ñ999 or from your personal list of numbers 00 – 49:
lift the handset or press SPK b e f o re you begin dialing.
lift the handset or press SPK b e f o re you begin dialing.

For the purposes of programming speed dial numbers, the last 6 p rogrammable keys of the right hand row are known as A, B, C, D, E and F and are defined below.
You may assign any speed dial number to an already existing one touch speed dial button for quick and easy dialing of frequently used numbers.
To call this telephone number, just press the One-touch speed dial button.
lift the handset or press SPK b e f o re you begin dialing.

To redial the last telephone number you dialed, press the LNR key or dial 1 9.
N O T E S :1. If the Hot Keypad feature has been turned off, you must
first lift the handset or press SPK b e f o re you begin dialing. 2. Redial does not apply to intercom calls.
To save the number you just dialed for later use, press the SNR k e y b e f o re hanging up. To redial this saved number at any time, press the SNR key or dial 1 7. The same line will be selected for you.
N O T E S :1. If the Hot Keypad feature has been turned off, you must
first lift the handset or press SPK b e f o re you begin dialing. 2. The saved telephone number is stored in memory until you save another. 3. Redial does not apply to intercom calls.
You may manually dial additional digits following a speed dial number or chain as many speed dial numbers together as re q u i re d : • After the first speed dial number is dialed, press SPD again and dial another speed number OR manually dial additional digits following a speed dial number.
When you are making an outside call and you receive a busy signal, the system can automatically redial the number for you. It will automatically redial at a pre - p rogrammed interval for up to 15 a t t e m p t s . • When you hear a busy signal, press the R E T RY b u t t o n .

N O T E S :1. If you make another call, auto-redial is canceled.
When making an outside call on a dial pulse line, press #. All digits dialed after the # with be sent as tones.
Voice Dialler gives you the ability to re c o rd a voice pattern into a digital format and store it to an addressable location. When the Vo i c e Dialler feature is activated, it will identify, retrieve and process the associated stored data. This latest technology has been applied to the a rea of personal speed dialing. It allows the calling party to speak a name into the handset and have the system place a call. This feature can be used by all types of stations.
N O T E : The Voice Dialler feature re q u i res the optional VDIAL card .
Please see your service and installation company for details.
To use Voice Dialler:

N O T E : Say the name as one word (e.g., Saint Cho, pro n o u n c e d
SaintCho). Avoid like names such as Ted, Red and Fred.

To make an announcement through the keyset speakers:
p ress PAGE and dial a zone number.
To make an announcement through the external paging speakers:
p ress PAGE and dial a zone number.

To page all designated keysets and external speakers at the same time:
in pro g re s s .
When you have a call for someone who is not at his/her desk, you can park the call and page the requested party:
To retrieve a parked call:

N O T E S :1. If the parked call is not received within a pre - p ro g r a m m e d
period of time, it will recall your keyset and have a slow flashing amber light. You cannot park and page interc o m c a l l s . 2. If the Hot Keypad feature has been turned off, you must first lift the handset or press SPK b e f o re you begin dialing.
When you are calling another station or station group and no one answers or you receive a busy signal, you can leave a message i n d i c a t i o n :
N O T E S :1. A station can have up to five message indications.
To cancel a message indication that you left at another station. Dial 4 2 plus the extension number of the station at which you left a message.
To cancel all message indications left at your keyset, dial 42 plus your extension. Your MSG light will go out.
lift the handset or press SPK b e f o re you begin dialing.

N O T E S :1. Display keyset users can view message indications and
return them in any ord e r. See Viewing Message Indications u n d e r Display Feature s. 2. If the Hot Keypad feature has been turned off, you must first lift the handset or press SPK b e f o re you begin dialing. 3. If a message has been left at your keyset by a keyset in Auto Answer, you must manually cancel the message after it has been re t u r n e d .
lift the handset or press SPK b e f o re you begin dialing.
You can have multiple programmed message keys and each one can have a diff e rent message code:

Use this feature when you want to block calls to your keyset.
N O T E S :1. If you place your keyset in DND mode and you do not
have a DND k e y, your A N S / R L S key will flash to indicate DND status. 2. If the Hot Keypad feature has been turned off, you must first lift the handset or press SPK b e f o re you begin dialing.
This feature re q u i res a DND k e y. If you are on a call and you do not wish to be interrupted while on that call, you can press the DND k e y and place your station in DND. When you hang up at the end of the call, DND will be automatically canceled and your keyset will be able to receive new calls.
You can mute the handset transmitter or the microphone during any c o n s e r v a t i o n :

When a music source is supplied, you may listen to music through the speaker in your keyset:
You can set the level for background music by using the VOL keys while listening to the music. This does not affect the speaker phone level.
This feature works like an alarm clock. Use it to remind yourself of an appointment later in the day (TO D AY ONLY) or as a daily re m i n d e r every day (DAILY). You can set up to three alarms. Each one can be either a TO D AY ONLY or a DAILY alarm.
When the alarm rings, you will hear three short rings repeated thre e times. Lift the handset to answer the alarm. If you do not, the alarm will alert you two more times at five minute intervals.
To set alarms:
To cancel individual alarms:

Reminder Messages under Display Feature s.
When you are programmed to receive calls from a door phone:
You may call the door phone and listen to what may be happening outside or in another ro o m .
lift the handset or press SPK b e f o re you begin dialing.
If programmed, an executive and a secretary can have a hot line between them. When the executive station is in the DND mode, all of its calls will ring the secretary station.

When engaged on a call and using the handset, you may want other people to hear the distant party's voice over the speaker:
it may be advisable to turn the group listening feature off b e f o re hanging up. This will eliminate a momentary squeal.
When equipped with optional equipment, your SAMSUNG DCS system will allow calls to be charged to a specific account:
p ress the ACCT key twice and redial the correct code. Only the last account code dialed will be printed.
You can allow/disallow incoming/outgoing calls from your keyset using this option. There are three possible levels, Unlocked, Locked all and Locked out. Unlocked means you can use your keyset without restriction, while Locked all level is to prevent other people from making or receiving calls from your keyset while you are away. The Locked out

f o l l o w s :
U n l o c k as normal Locked out the HOLD key will flash with 30 IPM. Locked all the HOLD key will be steady on
Keysets may receive a voice announcement while on another call. The calling station must have an O H VA k e y. When you are in DND, you cannot receive OHVA calls. The OHVA feature will work with i n t e rcom and transferred calls. To make an off-hook voice announcement:
N O T E S :1. When you are voice announcing to a station close to you,
use the handset to avoid an echo effect. 2. You cannot off-hook voice announce to single line t e l e p h o n e s . 3. Upon initiating OHVA, your original receiving voice channel is blocked and you will receive an announcement t h rough it, while your transmitting is still effective to the original party.

Your keyset can be programmed with an OHVA Block (OHBLK) key. P ressing this key will prevent anyone from making and OHVA to you until you press the button again and cancel the blocking.
Your keyset can be programmed with an OHVA Reject (REJECT) key. P ressing this key while receiving an OHVA call will disconnect the voice announcing party abd return you to your original call.
If your keyset is assigned to a station ring group, you can remove your keyset from the group and then put it back in. While you are out of the g roup, you can receive calls to your extension number but not calls to the group number. If you have an I N / O U T k e y :
If you do not have an I N / O U T k e y :

lift the handset or press SPK b e f o re you begin dialing.
The I N / O U T key can include an extender to indicate the specific gro u p that this key will affect. This means that if you are in multiple gro u p s , you can decide for which groups you will receive calls.

Each keyset user can select any one of eight ring fre q u e n c i e s :
F rom the factory, your station passcode is 1234. You can change your station passcode whenever you desire.
You can receive internal calls in one of three modes (see A n s w e r i n g I n t e rcom Calls under I n t e rcom Calls for descriptions) :

While on a outside call, pressing a line key, route key or a flashing CALL button will automatically put your call on hold and connect you to the next call. This feature can be turned on or off at your keyset.
Keyset users can switch between headset mode and handset mode. When using headset mode, press the A N S / R L S key to answer and release calls.
N O T E S :1. When you are in headset mode, your speaker phone is
d i s a b l e d . 2. When you place your keyset in headset mode, the A N S / R L S key will light steady to indicate that your station is in headset mode.
On the DCS, your keyset's keypad can be made "live" or "hot" so that it is not necessary to lift the handset or press SPK b e f o re you begin dialing. Calls can be made and features activated by simply dialing the C.O. line number, trunk group access code, intercom number or f e a t u re access code. To activate this feature .

You can hear a short beep (confirmation tone) each time you press a button on the dial pad. This tone can be turned on or off .
This feature allows keyset users to hear the remaining portion of an ongoing internal page after you return your keyset to idle. To enable this feature :
This feature automatically answers ringing calls when you lift the handset or press the A N S / R L S k e y. This method will always answer calls in the order they arrived at your keyset. When you turn ring p re f e rence off, you must press the flashing button to answer a call, allowing you to answer calls in the order you choose.

The three keys below the display are substitutes for dedicated feature keys and access codes. Pressing one of these keys has the same effect as p ressing a programmable key. Thease keys are called soft keys as their functions are not fixed. They change to present you with the best options for that call condition. The use of soft keys allows the p rogrammable keys to be used for more DSS and speed dial keys.
The SCROLL key is used to display options available to the user at a particular time or during a specific pro c e d u re. Press this key once while in the ilde state to view the three main categories available.
A N S W E R: Guides you through the options to answer calls. O T H E R: Guides you through features other than making or
answering calls. C A L L: Guides you through the options to make a call.
Select one of the main categories: CALL, OTHER or ANS (ANSWER). P ress the SCROLL key to display additional options available under each of the three main categories. The symbol °Ê displayed as the last character on the lower line of the display indicated that there are additional options. P ress the SCROLL key to display these additional options.
User instructions will be displayed in lower case letters. Options assigned to soft keys are in upper case letters.

An 11 character directory name can be assigned to each extension n u m b e r. Display keysets can view the name of the called or calling station before answering.
Each outside line can have an 11 character directory name. Incoming calls can be easily identified and answered with diff e rent gre e t i n g s .
Outside and internal calls ringing to a station group will display [CALL FOR XXX] where XXX is the station group number. This allows you to answer calls directed to you diff e rently than calls directed to your gro u p .
Each station or speed dial number can have an associated dire c t o r y name. A station or speed dial number can be selected by scro l l i n g alphabetically through a directory name list. This on-line "phone book" allows the user to look up and dial any station or speed dial number in seconds.
To dial by dire c t o r y :
During everyday call handling, your keyset display pro v i d e s information that is helpful and in some cases invaluable. Displays like

[CALL FROM 203], [TRSF TO 202], [701 RINGING], [TRANSFER FM 203], [708 busy], [Camp on to 204], [Recall from 204 ], [Call for 501], [message frm 204] and [FWD ALL to 204] keep you informed of what is happening and where you are. In some conditions you are p rompted to take an action and in other cases you receive dire c t o r y i n f o r m a t i o n .
Display keysets begin showing digits as they are dialled. They will stay in the display until the call duration timer comes on automatically or the TIMER button is pressed. If the call duration timer is not used, the number dialled is displayed until the call is released, transferred or put on hold.
The system can be set to automatically time outside calls. A few seconds after you dial a telephone number, the timer will appear in the d i s p l a y. It appears immediately for incoming calls. The call timer continues for the duration of the call. The call timer continues for the duration of the call. Call duration times are displayed in minutes and seconds. If a call lasts longer than 99 minutes, the timer re s t a r t s .
You can press the TIMER key to manually begin timing a call. Press it again to stop timing. If you press it while automatic timer is on, the call duration time is re s t a r t e d .
Display keyset users may have the timer automatically start when they answer incoming calls or after a short delay on an outgoing call.

Display phone users may use this feature as a simple stopwatch.
Display keyset users may have the call charge automatically displayed as soon as the central office sends the metering pulse.
You can view all your message indications before you return them:
When you use the alarm/appointment reminder feature, you can c reate a 16 character reminder message. When the alarm rings, your message will appear instead of [ALARM REMINDER]. To program reminder messages:

C O U N T 1 2 3 4 5
DIAL 1 s p a c e ? , ! 1
DIAL 3 D E F # 3
DIAL 4 G H I $ 4
DIAL 5 J K L % 5
DIAL 6 M N O ^ 6
DIAL 7 P R S & 7
DIAL 8 T U V 8 8
DIAL 9 W X Y ( 9
DIAL 8 : = [ ] 8
The # key can be used for the following special characters: #, space, &, !, :, ?, ., %, $, -, /, [, ], @ , ^, , ), _, +, {, }, ;, |," and ~. N O T E : When the character you want appears on the same dial pad
key as the previous character, press UP to move the cursor one space to the right.
To cancel an individual alarm and reminder message:

Each personal speed dial number can have a ten character name assigned to it. This name is used to select the speed dial bin when you a re dialling by dire c t o r y. To program speed dial names:
You can assign an 11 character name to your keyset. This allow other display keyset users to call you using the directory dial feature. To p rogram a station name
You can view your key assignments and add extenders to some of your programmable keys for easy one touch operation of fre q u e n t l y used features.

K E Y E X T E N D E R
B O S S Boss and Secretary (1 - 4)
D P D i rect Pickup (extension or station group number)
D S Any extension or station group number
F W R D Call Forward (0 - 5) GPIK Group Pick-up (01 - 20)
I G In/Out of Group (501 - 529)
M M P G Meet Me Page (0 - 9, 8)
PA G E Page (0 - 9, 8)
S P D Speed Dial (00 - 49, 500 - 999)
F S M G P rogrammable Message (01 - 20)
D I R SYS (0), PERS (1) or STN (2)
S P UCD supervise ( UCD group number)
e x t e n d e r.
You can decide if you want to see the CLIP name or CLIP number in the display. Regardless of which one is selected, you can press the NND key to view the other pieces of CLIP information. To select the type of CLIP information you wish to view first:

In the event that you have a call waiting or a camped-on call at your keyset, you can press the NEXT key to display the CLIP information associated with the call in queue at your keyset. Either the CLIP name or number will show in the display depending on your Name/Number selection.
To view CLIP information for calls that have been camped-on to your keyset, press the NEXT k e y. If your keyset does not have a NEXT k e y, p ress the CLIP key and then the NEXT soft key.
At any time during an incoming call that provides CLIP information, you may press the S AVE key to save the CLIP number. If your keyset does not have a S AVE k e y, press the CLIP k e y, the SCROLL key and then the S AVE soft key.
To redial a number that has been saved, press the S AVE key or dial 19.
handset or press SPK b e f o re you begin dialing.
At any time during an incoming call that provides CLIP information, you may save the CLIP number as a speed dial number in your personal speed dial list.
To store a CLIP number in a personal speed dial bin:

If you are informed that an incoming call is on hold or has been parked for you, you may view the CLIP information before you retrieve the call. This will influence how you choose to handle the call.
F rom an idle keyset:
If you are on a call:

N O T E S :1. If you are on an intercom call or you have Automatic Hold
turned off, you must finish the existing call or place it on hold before inquiring. 2. If you are inquire about an outgoing call, you will receive a [call no longer available] display.
This feature always you to review CLIP information for calls sent to your keyset. This list can contain 10-50 calls in a first-in, first-out basis. The list includes calls that you answered and calls that rang your keyset but that you did not answer. When reviewing this list, you can pass one button to dial the person back. To access the CLIP information stored in your REVIEW list:
system administrator to determine the number of bins assigned to your keyset.

When you are making an outside call using LCR and dial an incorre c t digit, you can press the CLEAR soft key to reenter the telephone n u m b e r. You do not need to redial 9 to reaccess LCR.

The add-on module (AOM) is used when you need more p rogrammable keys. The extra programmable keys are used exactly as a re the ones on your keyset. Make them DSS/BLF keys, C.O. line keys, One Touch Speed Dial buttons or any combination of these and other f e a t u re keys. A maximum of two AOMs can be added to any keyset.







The DCS telephone system has the following preset (default) feature access codes. These codes can be used if a key is not available for the feature you want to use. Standard telephone users must always dial these codes.
0 Call attendant or system operator 55 + 1 Page internal zone 1 10 + xxx Retrieve parked calls 55 + 2 Page internal zone 2 1 1 Put calls on and take calls off hold 55 + 3 Page internal zone 3 12 +xxx Retrieve calls on hold at another station 55 + 4 Page internal zone 4 1 3 Door lock release 55 + 5 Page external zone 1 16 + xxx Make speed dial calls 55 + 6 Page external zone 2 1 7 Save number and redial it 55 + 7 Page external zone 3 1 8 Recall dial tone for new call 55 + 8 Page external zone 4 1 9 Last number redial 55 + 9 Page all external zones 2 x x Extension numbers 55 + 8 All Page 3 x x Extension numbers 5 6 Meet Me Answer 4 0 0 Cancel Do not Disturb 5 7 Alarm sensor clear 4 0 1 Set Do Not Disturb 5 8 DISA alarm clear 4 1 Set Message No Ring 5 9 Walking class of service 42 + xxx Cancel message 6 0 0 Cancel all call forwarding 4 3 Set/return messages 601 + xxx Set Forward All Calls 4 4 Busy station/line callback 602 + xxx Set Forward Busy 4 5 Busy station camp-on 603 + xxx Set Forward No Ans 4 6 Set up a conference 604 + xxx Set Fwd Busy/No Ans 4 7 Enter account code 605 + xxx Set Fwd Follow me 4 8 Set programmed station message 6 5 Directed call pickup 4 9 Send flash to outside line 6 6 Group call pickup 5 0 0 Station hunt group 6 7 Universal Answer t o 6 8 1 Voice Dialler 5 2 9 Station hunt group 6 8 2 Voice Dialler Record 5 3 + g r p + 0 Out of group 7 x x Individual line numbers 5 3 + g r p + 1 In group 8 x Trunk groups 5 4 + z o n e Meet Me Page 9 Trunk group 9 (Local) 55 + 0 Page all internal zones
CODE:GA68-60002A ED : 03 JANUARY 1996 Printed in Korea
I possessori del prodotto e il nostro team di solito rispondono entro 24 ore, e la tua domanda sarà utile anche ad altri.
Invia la prima domanda: risponderanno altri possessori o il nostro team.