Manuale d’uso / di manutenzione del prodotto SF-750 Series del fabbricante Samsung
Vai alla pagina of 98
.
This manual is provided for information purposes only . All information included herein is subject to change without notice. Samsung Electronics is not responsible for an y changes, direct or indirect, arising from or related to use of this manual. © 2004 Samsung Electronics Co.
ii C ONTENTS Chapter 1: G ETTING S TARTED Setting Up Your Machine .................................... 1.2 Unpacking .................................................................... 1.2 Selecting a Location ........................................
iii Receiving a Fax .................................................. 2.6 About the Receiving Modes ............................................. 2.6 Loading Paper for Receiving Faxes ................................... 2.6 Receiving Automatically in Fax Mode .
iv Chapter 4: A DDITIONAL F EATURES Using Secure Receiving Mode ......................................... 4.2 Printing Reports ............................................................ 4.3 Using Advanced Fax Settings ...............................
v Important Precautions and Safety Information When using this machine, these basic safet y precautions should always be followed to reduce risk of fire, electric shock, and injury to people: 1. Read and understand all instructions. 2. Use common sense whenever oper ating electrical appliances.
vi Laser Safety Statement The printer is certified in the U.S . to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 825.
vii Ozone Safety During normal operation, this machine produces oz one. The ozone produced does not present a hazard to the oper ator . However , it is advisable that the machine be oper ated in a well ventilated area. If you need additional information about oz one, please request your nearest Samsung dealer .
viii Canadian Radio Interference Regulations This digital apparatus does not ex ceed the Class B limits for r adio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled “Digital Appar atus” , ICES-003 of the Industry and Science Canada.
ix You should also know that: • Y our machine is not designed to be connected to a digital PBX system. • If y ou intend to use a computer modem or fax modem on the same phone line as y our machine, you may experience tr ansmission and reception problems with all the equipment.
x Replacing the Fitted Plug (for UK Only) I MPORTANT The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has a 13 amp fuse. When you change or examine the fuse, you must re-fit the correct 13 amp fuse. Y ou then need to replace the fuse cov er .
xi.
xii Differences Between British and American English W ARNING • Do not disassemble the machine as it ma y give you an electric shock. • If you print large amounts of copies, the surface of the output tr ay may become hot. Be careful not to touch the surface, especially for children.
1 G ETTING S TARTED Thank you for purchasing this facsimile. This chapter gives you step-by-step instructions for setting up your machine. This chapter includes: • Setting Up Your Machine Unpacking .
G ETTING S TARTED 1 .2 Setting Up Your Machine Unpacking Remo ve the machine and all accessories from the packing carton. Mak e sure that the machine has been pack ed with the following items. If there is a missing item, contact the retailer where y ou bought the machine: N OTES : • Components may differ from one country to another .
G ETTING S TARTED 1 .3 1 Remo ve the packing tape from the front, back and sides of the machine. Selecting a Location Select a level, stable place with adequate space for air circulation. Allow extra space for opening co vers and tra ys. The area should be well-ventilated and aw ay from direct sunlight or sources of heat, cold and humidity .
G ETTING S TARTED 1 .4 Understanding the Component Location These are the main components of y our machine: Front View Rear View Control Panel (See page 1.
G ETTING S TARTED 1 .5 1 Control Panel Functions 1 Use to store frequently -dialed fax number and dial them with a touch of a button. Allows you to shift the one-touch buttons to the numbers 21 through 40. 2 C O P Y Adjusts the brightness of the documents for the current copy job.
G ETTING S TARTED 1 .6 Attaching the Document Output Support Insert the two tabs on the supplied document output support into the holes on both sides of the paper output tr ay .
G ETTING S TARTED 1 .7 1 Installing the Toner Cartridge 1 Open the front cover . 2 Remo ve the starter toner cartridge from its bag. Gently roll the cartridge 5 or 6 times to distribute the toner ev enly inside the cartridge. Thoroughly rolling the cartridge will assure the maximum copies per cartridge.
G ETTING S TARTED 1 .8 Loading Paper Y ou can load approximately 250 sheets. T o load a stack of Letter-sized paper: 1 Pull open the paper tr ay and remove it from the machine. 2 Push down on the pressure plate until it locks into place. 3 F an the edges of the paper stack to separ ate the pages.
G ETTING S TARTED 1 .9 1 Changing the Paper Size in the Paper Tray T o load longer sizes of paper , such as Legal-sized paper , you need to adjust the paper guides to extend the paper tr ay . 1 After pressing and unlatching the guide lock, slide the paper length guide out completely to extend the paper tr ay to its full length.
G ETTING S TARTED 1 .10 Connecting the Telephone Line 1 Plug the telephone line cord into the LINE jack and the other end into the wall jack. 2 T o connect a telephone and/or answering machine to y our machine, plug the cord of your extension phone or answering machine into the EXT jack.
G ETTING S TARTED 1 .11 1 N OTES : • Use the T AM lead and the telephone line cord supplied with y our machine. • In the United Kingdom, if a three-wire type (SHUNT -wire, found on older equipment.
G ETTING S TARTED 1 .12 Setting Up the Machine System Changing the Display Language T o change the language that displays on the display of the control panel, follow these steps: 1 Press Menu until “Machine Setup” appears on the top line of the display .
G ETTING S TARTED 1 .13 1 Entering Characters Using the Number Keypad As you perform v arious tasks, you may need to enter names and numbers. For example, when y ou set up your machine, you enter y our name or your company’ s name and telephone number .
G ETTING S TARTED 1 .14 Setting the Date and Time The current date and time are shown on the displa y when your machine is on and ready to work. All of your faxes will hav e the date and time printed on them. N OTE : If power to the machine is cut off , y ou need to reset the correct time and date once the power is restored.
G ETTING S TARTED 1 .15 1 Setting the Paper Type and Size After loading paper in the paper tr ay (T ray 1), you need to set the paper type and size using the control panel buttons. 1 Press Menu . The display shows “P aper Setting” on the top line and the first menu item, “Paper T ype, ” on the bottom line.
G ETTING S TARTED 1 .16 Setting Sounds Y ou can control the following sounds: • Ringer: adjusts the ringer volume. • Key Sound : With this option set to “On, ” a key tone sounds each time a key is pressed. • Alarm Sound: turns the alarm sound on or off .
G ETTING S TARTED 1 .17 1 Using the Save Modes Toner Save Mode T oner Save mode allows your machine to use less toner on each page. Activating this mode extends the life of the toner cartridge longer than normal, but it reduces the print quality . T o turn the toner save mode on or off , press Toner Save .
G ETTING S TARTED 1 .18 Power Save Mode Power Save mode allows y our machine to reduce power consumption when it is not in actual use. Y ou can turn this mode on b y selecting the length of time for which the machine waits after a job is printed before it switches to a reduced power state.
G ETTING S TARTED 1 .19 1 Available Fax Setup Options Y ou can use the following setup options for configuring the fax system: Option Description Ring T o Answer Y ou can specify the number of times the machine rings, 1 to 7, before answering an incoming call.
G ETTING S TARTED 1 .20 M EMO.
2 B ASIC F UNCTIONS This chapter gives you basic information about using your machine as a fax machine and a copier . This chapter includes: • Sending a Fax Preparing a Document Loading a Document A.
B ASIC F UNCTIONS 2 .2 Sending a Fax Preparing a Document Using the ADF (Automatic Document F eeder), you can load up to 50 documents for one job. When you use the ADF : • Do not load documents smaller than 142 x 148 mm or larger than 216 x 356 mm.
B ASIC F UNCTIONS 2 .3 2 3 Adjust the document guides to the document siz e. 4 Adjust the document resolution,. See the following section. Adjusting the Document Resolution The default document settings produce good results when setting t ypical text based documents.
B ASIC F UNCTIONS 2 .4 Sending a Fax Automatically 1 Load the document(s) face down into the ADF . For details about loading a document, see page 2.2. 2 Adjust the document resolution to suit y our fax needs. See page 2.3. If you need to change the darkness, see page 1.
B ASIC F UNCTIONS 2 .5 2 Confirming a Transmission When the last page of your document has been sent successfully , the machine beeps and returns to Standby Mode. When something goes wrong while sending y our fax, an error message appears on the display .
B ASIC F UNCTIONS 2 .6 Receiving a Fax About the Receiving Modes • In Fax mode, the machine answers an incoming fax call and immediately goes into the fax reception mode.
B ASIC F UNCTIONS 2 .7 2 Receiving Automatically in Fax Mode Y our machine is preset to F ax mode at the factory . If you have changed the receiving mode, take the following steps to receiv e faxes automatically: 1 Press Receive Mode . 2 Press and hold Receive Mode until “F ax” displays on the bottom line.
B ASIC F UNCTIONS 2 .8 N OTES : • When you have set y our machine to Ans/F ax mode and your answering machine is switched off or no answering machine is connected to the EXT jack, your machine automatically goes into F ax mode after a predefined number of rings.
B ASIC F UNCTIONS 2 .9 2 T o set up the DRPD mode: 1 Press Menu until “F ax Setup” appears on the top line of the displa y . 2 Press the scroll button ( ➛ or ❿ ) until you see “DRPD Mode” on the bottom line and press Enter . 3 When “Set” displays on the bottom line, press Enter .
B ASIC F UNCTIONS 2 .10 Making a Copy Loading Paper for Copying The instructions for loading print materials into the paper tr ay are the same whether you are faxing or copying.
B ASIC F UNCTIONS 2 .11 2 3 Open the rear cover to use the rear output slot. 4 After copying, close the rear cov er . Setting the Paper Type and Size for the Manual Feeder After loading paper in the manual feeder , y ou need to set the correct paper type and size using the control panel buttons.
B ASIC F UNCTIONS 2 .12 Setting Copy Options The buttons on the control panel let y ou make all the basic copy options; darkness, document type, copy size and number of copies. Set the following options for the current cop y job before pressing Start Copy/Fax to make copies.
B ASIC F UNCTIONS 2 .13 2 Reduced/Enlarged Copying Using the Reduce/Enlarge button, y ou can reduce or enlarge the size of a copied image from 50 % to 200 %. T o select from the predefined copy sizes: 1 Press Reduce/Enlarge . The default setting appears on the bottom line of the displa y .
B ASIC F UNCTIONS 2 .14 Setting the Time Out Option Y ou can set the time the machine w aits before it restores the default copy settings, if you do not start copying after changing them on the control panel. 1 Press Menu on the control panel until “Copy Setup” appears on the top line of the display .
B ASIC F UNCTIONS 2 .15 2 Automatic Dialing One-touch Dialing The 20 one-touch buttons on the control panel lets y ou store frequently- used fax numbers and enables you to dial a number automatically with a touch of a button. Using the Shift button, you can store up to 40 fax numbers on the one- touch buttons.
B ASIC F UNCTIONS 2 .16 Speed Dialing Y ou can store up to 150 frequently dialed numbers in one, two or three-digit speed dial locations (0-149). Storing a Number for Speed Dialing 1 Press Phone Book . 2 Press Phone Book or the scroll button ( ➛ or ❿ ) to display “Store&Edit” on the bottom line of the displa y .
B ASIC F UNCTIONS 2 .17 2 Group Dialing If you frequently send the same document to sev er al destinations, you can create a group of these destinations and set them under a one or two-digit group dial location. This enables y ou to use a group dial number setting to send the same document to all the destinations within the group .
B ASIC F UNCTIONS 2 .18 Editing Group Dial Numbers Y ou can delete a specific speed dial number from a selected group or add a new number to the selected group . 1 Press Phone Book . 2 Press Phone Book or the scroll button ( ➛ or ❿ ) to display “Store&Edit” on the bottom line of the displa y .
B ASIC F UNCTIONS 2 .19 2 Searching for a Number in the Memory There are two w ays to search for a number in memory . Y ou can either scan from A to Z sequentially , or you can search using the first letter of the name associated with the number . Searching Sequentially through the Memory 1 Press Phone Book .
B ASIC F UNCTIONS 2 .20 M EMO.
3 A DVANCED F AX F UNCTIONS This chapter includes: • Sending Broadcasting Faxes • Sending a Delayed Fax • Sending a Priority Fax • Polling a Remote Machine • Adding Documents to a Scheduled .
A DVANCED F AX 3 .2 Sending Broadcasting Faxes Using the Broadcasting button on the control panel, y ou can use the broadcasting fax feature, which allows y ou to send a document to multiple locations. Documents are automatically stored in memory and sent to a remote station.
A DVANCED F AX 3 .3 3 Sending a Delayed Fax Y ou can set y our machine to send a fax at a later time when you will not be present. 1 Load the document(s) face down into the ADF . For details about loading a document, see page 2.2. 2 Adjust the document resolution to suit y our fax needs.
A DVANCED F AX 3 .4 Sending a Priority Fax Using the Priorit y F ax feature, a high priorit y document can be sent ahead of reserved oper ations. The document is scanned into memory and transmitted when the current oper ation is finished. In addition, the priority transmission interrupts a broadcast oper ation between stations (i.
A DVANCED F AX 3 .5 3 Polling a Remote Machine Polling is used when one fax machine requests another to send a document. This is useful when the person with the original document to be sent is not in the office. The person who wants to receiv e the document calls the machine holding it and requests that the document be sent.
A DVANCED F AX 3 .6 Adding Documents to a Scheduled Fax Y ou can add documents to the dela yed tr ansmission previously reserv ed in your machine’ s memory . 1 Load the document(s) face down into the ADF . For details about loading a document, see page 2.
4 A DDITIONAL F EATURES This chapter includes: • Using Secure Receiving Mode • Printing Reports • Using Advanced Fax Settings.
A DDITIONAL F EATURES 4 .2 Using Secure Receiving Mode Y ou may need to prevent your received fax es from being accessed by unauthorized people. Y ou can turn on Secure Receiving mode to restrict the printing out all of received faxes when the machine is unattended.
A DDITIONAL F EATURES 4 .3 4 Printing Reports Y our machine can print reports containing useful information. The following reports are av ailable: Phonebook List This list shows all of the numbers currently stored in the machine’ s memory as speed dial and group dial numbers.
A DDITIONAL F EATURES 4 .4 Printing a Report 1 Press Menu until “R eports” appears on the top line of the display . The first av ailable menu item, “Phone Book” displays on the bottom line. 2 Press the scroll button ( ➛ or ❿ ) to displa y the report or list you want to print on the bottom line.
A DDITIONAL F EATURES 4 .5 4 Advanced Fax Setting Options Option Description Send Forw ard Y ou can set the machine to always forward all of the outgoing faxes to a specified destination, in addition to the fax numbers you entered. Select Off to turn this feature off .
A DDITIONAL F EATURES 4 .6 Stamp RCV Name This option allows the machine to automatically print the page number and the date and time of the reception at the bottom of each page of a received document. Select Off to turn this feature off . Select On to turn this feature on.
5 M AINTENANCE This chapter provides information for maintaining your machine and the toner cartridge. This chapter includes: • Clearing the Memory • Adjusting Shading • Cleaning Your Machine .
M AINTENANCE 5 .2 Clearing the Memory Y ou can selectively clear information stored in your machine’ s memory . 1 Press Menu on the control panel until “Maintenance ” appears on the top line of the display . 2 Press the scroll button ( ➛ or ❿ ) until y ou see “Clear Memory” on the bottom line and press Enter .
M AINTENANCE 5 .3 5 Adjusting Shading When the scan unit becomes dirty , it can alter the shading value. If y our copy has black lines or is blurred, adjust the shading setting. 1 Load a sheet of white paper into the ADF . 2 Press Menu on the control panel until “Maintenance ” appears on the top line of the display .
M AINTENANCE 5 .4 3 With a dry lint-free cloth, wipe a way an y dust and spilled toner from the toner cartridge area and the toner cartridge ca vity . C AUTION : T o prevent damage to the toner cartridge, do not expose it to light for more than a few minutes.
M AINTENANCE 5 .5 5 Maintaining the Toner Cartridge Toner Cartridge Storage T o get the most from the toner cartridge, keep the following guidelines in mind: • Do not remove the toner cartridge from its package until it ’s ready to use. • Do not refill the toner cartridge.
M AINTENANCE 5 .6 Replacing the Toner Cartridge When the toner eventually runs out, only blank pages print when a print job is sent or when a fax is receiv ed. At this stage, the toner cartridge needs to be replaced. The display on the control panel shows the w arning message, “[T oner Empty]” and the machine stops printing.
M AINTENANCE 5 .7 5 Ignoring the Toner Empty Message When the toner cartridge is empty , the machine shows a “[T oner Empty]” message and stops printing. Y ou can set the machine to ignore the message when it displays and to continue printing the pages.
M AINTENANCE 5 .8 Replacing the ADF Rubber Pad Y ou can purchase an ADF rubber assembly from a Samsung dealer or the retailer where you bought y our machine. 1 Open the control panel by gripping its top and pulling on it. 2 Squeeze the tab at the bottom of the ADF rubber assembly and then pull it out.
6 T ROUBLESHOOTING This chapter gives helpful information for what to do if you encounter an error . This chapter includes: • Clearing Document Jams • Clearing Paper Jams • Clearing LCD Error Me.
T ROUBLESHOOTING 6 .2 Clearing Document Jams When a document jams while it passes through the ADF (A utomatic Document F eeder), “[Document Jam]” appears on the display . 1 Remo ve the remaining documents from the ADF . 2 Pull the jammed document gently out of the ADF .
T ROUBLESHOOTING 6 .3 6 Clearing Paper Jams When a paper jam occurs, “P aper Jam” appears on the displa y . R efer to the table below to locate and clear the paper jam. T o avoid tearing the paper , pull the jammed paper out gently and slowly . Follow the steps on the following sections to clear the jam.
T ROUBLESHOOTING 6 .4 In Tray 2 1 Open and close the front co ver . The jammed paper automatically exits the machine. If the paper does not exit, continue to step 2. 2 Pull T ray 2 open. 3 Remo ve the jammed paper by gently pulling it str aight out. 4 Insert the paper tra y into the machine until it snaps into place.
T ROUBLESHOOTING 6 .5 6 4 Remo ve the jammed paper by gently pulling it str aight out. 5 Close the rear cover . 6 Open and close the front cov er to resume printing. In the Fuser Area or Around the Toner Cartridge N OTE : The fuser area is hot. T ake care when remo ving paper from the machine.
T ROUBLESHOOTING 6 .6 In the Manual Feeder “ ” appears on the display when y ou try to print using the manual feeder and the machine does not detect paper , due to no paper or improper paper loading. The error message may also occur when the paper is not properly fed into the machine through the manual feeder .
T ROUBLESHOOTING 6 .7 6 Clearing LCD Error Messages Messages appear on the display of the control panel to indicate the machine’ s status or errors. R efer to the following table to understand the messages and correct the problem, if necessary . Messages and their meanings are listed in alphabetical order .
T ROUBLESHOOTING 6 .8 Load Document Y ou have attempted to set up a copy or fax oper ation with no document loaded. Load a document and try again. Low Heat Error There is a problem in the fuser unit. Unplug the power cord and plug it back in. If the problem persists, please contact a service representative.
T ROUBLESHOOTING 6 .9 6 [Retry R edial?] The machine is waiting for a specified time interv al to redial a previously busy station. Y ou can press Enter to immediately redial, or Stop/Clear to cancel the redial operation. [Stop Pressed] The Stop/Clear button is pressed during a copy or fax operation.
T ROUBLESHOOTING 6 .10 Solving Problems The following chart lists some conditions that ma y occur and the recommended solutions. F ollow the suggested solutions until the problem is corrected. If the problem persists, please call for service. Paper Feeding Problems Condition Suggested solutions Paper is jammed during printing.
T ROUBLESHOOTING 6 .11 6 Copying Problems Faxing Problems Condition Suggested solutions Copies are too light or too dark. Use the Darkness button to dark en or lighten the background of the copies.
T ROUBLESHOOTING 6 .12 The document does not feed into the machine. • Make sure that the document is not wrinkled and y ou are putting it in correctly . Check that the document is the right size, not too thick or thin. • Make sure that the control panel is firmly closed.
A A PPENDIX This chapter includes: • Installing an Optional Tray • Specifications.
A .2 Installing an Optional Tray Y ou can increase the paper handling capacit y of y our machine by installing an optional T ray 2. This tra y holds 250 sheets of paper . 1 T urn the machine off and unplug all cords from the machine. 2 Remo ve the packing material from the tr ay and remo ve the tape fixing the interface cable to the tr ay .
A .3 A 5 Plug the interface cable of the tr ay into the optional tr ay connector on the back of the machine. 6 Load paper in the optional paper tr ay . The instructions for loading paper in this tra y is the same as you would when loading the standard paper tra y .
A .4 Specifications General Specifications Item Description Automatic document feeder (ADF) Up to 50 sheets (weight: 75 g/m 2 , 20 lb) ADF Document size Width: 142 to 216 mm (5.
A .5 A Copier Specifications Facsimile Specifications Item Description Scan method Color CIS Scan length Maximum: 15.7 inches (400 mm) Scan width Maximum 8.
A .6 Paper Specifications Overview Y our machine accepts a variety of print materials, such as cut -sheet paper , including up to 100 % recycled fiber content paper , labels and transparencies. Properties, such as weight, composition, grain and moisture content, are important factors affecting the machine’ s performance and the output quality .
A .7 A Guidelines for Using Paper For best results, use con ventional 75 g/m 2 (20 lb) paper . Ensure that the paper is of good quality , and free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, v oids, and curled or bent edges.
A .8 Paper Storage Environment Paper stor age environmental conditions directly affect the feed oper ation. Ideally , the machine and paper stor age environment should be at or near room temper ature, and not too dry or humid. R emember that paper is hygroscopic; it absorbs and loses moisture r apidly .
I NDEX A adding documents 3.6 ADF (Automatic Document Feeder), load 2.2 automatic dialing group 2.17 one-touch 2.15 speed 2.16 automatic redialing 2.5 B broadcasting faxes 3.2 C canceling fax 2.4 scheduled faxes 3.6 characters, enter 1.13 Cleaning Scan unit 5.
copying 6.11 error messages 6.7 faxing 6.11 paper feeding 6.10 R rear output slot 2.11 receiving a fax in Ans/Fax mode 2.7 in DRPD mode 2.8 in Fax mode 2.7 in Secure Receiving mode 4.2 in Tel mode 2.7 in the memory 2.9 redial, last number 3.2 reduced/enlarged copy 2.
2 Contact SAMSUNG WORLD WIDE If you have any comme nts o r questions re garding Samsung products, contact the SAMS UN G custom er care center . Country Cust omer C are Cent er Web Si t e CANADA 1-800-SAMSUNG (7267864) www .samsung.com/ ca MEXICO 01-800-S AMSUNG (7267864) ww w .
3 HUNGAR Y 06 40 985 985 www .sam sung.com/hu IT ALIA 199 153 153 www .sa msung.com/it LUXEMBUR G 02 261 0 3 710 www.sam sung.lu NETH ERLAN DS 0900 20 200 88 (€ 0,10/min) www .sam sung.com/nl NORW A Y 231 627 22 www .sam sung.com/ no POLAND 0 801 80 1 881 www.
Home Visit us at: www.samsungprinter.com P/N.JC68-01269 A Re v . 2 .00.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Samsung SF-750 Series è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Samsung SF-750 Series - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Samsung SF-750 Series imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Samsung SF-750 Series ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Samsung SF-750 Series, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Samsung SF-750 Series.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Samsung SF-750 Series. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Samsung SF-750 Series insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
