Manuale d’uso / di manutenzione del prodotto SCC-3000 del fabbricante Samsung
Vai alla pagina of 39
Thank you for buying a Samsung SYSTEM CONTROLLER. This manual will guide you through using the SYSTEM CONTROLLER. Please read this manual carefully before using the SYSTEM CONTROLLER.
《 2 》 Contents ● Important Safety Instructions 3 ● Major Functions and Features (1) Overview 5 (2) Features 5 ● Product Components 5 ● System Overview 6 ● Names and Functions of Each Par.
《 3 》 Important Safety Instructions ■ All work related to the installation of this appliance must be performed by qualified service personnel or system installers. - If the product is connected or installed improperly, electric shock, fire, severe injury, and/or damage can result.
《 4 》 Important Safety Instructions ■ If the controller body gets dirty, turn the power off and wipe the surface with a soft cloth. - Do not use chemical agents such as alcohol or benzene. ■ For detailed information on upgrading the firmware, please direct your inquiries to the installation vendor.
《 5 》 Major Functions and Features (1) Overview This product is designed for use only with the Speed Dome camera, CCTV receiver, and Samsung Digital Video Recorder.
《 6 》 System Overview ※ Please refer to page 39 for the detailed connection map of the JUNCTION Box, Controllers and external devices. (1) General Connection : Controller Connection Cable : RS-485/422 : Video Cable DVR Dome Camera + DVR: 255 max.
《 7 》 Names and Functions of Each Part (1) Camera Setup Section ① RESET : Resets camera power. ② PRESET : Moves camera to the preset location (see p.16). ③ LIGHT : Toggles the lights around the camera on and off. ④ AUX : Toggles the camera’s external case AUX on and off.
《 8 》 Names and Functions of Each Part (2) Number Pad ※ 'F' in the table below refers to the Function button. ① 0 ~ 9 : Used for entering camera ID, channel number, monitor number, DVR ID, etc. (see p.23). ② F + 0 : Activates the system setup menu (see p.
《 9 》 Names and Functions of Each Part (4) Universal Controller ① ZOOM W/T : Performs camera zoom action (wide and telephoto). ② FOCUS -/+ : Used for manual focus adjustment. ③ || : Used for moving the menu cursor up (when menu is active), pausing DVR playback, or playing stills.
《 10 》 Names and Functions of Each Part ※ Some DVR controller buttons may not be supported or may be used differently than as described in this manual, depending on the DVR model. Please refer to the table below for the buttons supported by major DVR model manufacturers.
《 11 》 Names and Functions of Each Part (6) Camera Controller ① Joystick: Used for moving the camera up, down, left, and right, and for zoom control (see p.13). 1) Tilt up (Up button): Moves the camera up. 2) Tilt down (Down button): Moves the camera down.
《 12 》 Before Operation (1) Power-On ① Power on the connected external devices before turning the controller on. ② Press the power button at the back of the controller to power on the controller.
《 13 》 Before Operation (4) Joystick/Camera Control Button ■ The joystick can be used to control the camera ’ s left and right (pan) and up and down (tilt) movements.
《 14 》 Before Operation (5) Camera Movement Speed Control ■ Use the joystick or press the Slow/Fast button at the bottom of the camera control button section to adjust the camera movement speed. ▤ You must press the ESC button after adjusting the camera movement speed in order to be able to use other controller buttons.
《 15 》 ● The menu may be different depending on the PTZ camera model. ● Press the ESC button to move to an upper setup mode. INFORMA TION PTZ Mode (1) PTZ Setup Mode ■ This menu is for setting up the PTZ camera function. It is impossible to operate Speed Dome and DVR by sub-controllers when the master controller is set to on.
《 16 》 PTZ Mode (2) PRESET ■ This menu is for setting the camera to move to preset locations. (2-1) PRESET Setup ① At the [PTZ SETUP 1 ▶ ] menu, press the 1 button (see p.15). ② Use the joystick or camera control button (SCC-3000 model) to move the camera to the desired location (move up, down, left, and right, and control zoom).
《 17 》 PTZ Mode (3) SWING ■ This menu is for setting the camera to alternate between two assigned locations horizontally (pan) or vertically (tilt). Setting the SWING SETUP menu by controllers is only possible in the SPD series. In case of products by other manufacturers, the setting has to be done by the OSD menu of the camera.
《 18 》 PTZ Mode (4) GROUP ■ This menu is for setting repeated sequential surveillance of assigned locations with assigned speed and intervals. Setting the GROUP SETUP menu by controllers is only available for an SPD series. In case of products by other manufacturers, the setting has to be done by the OSD menu of the camera.
《 19 》 PTZ Mode (5) TOUR ■ This menu is for setting one or more Groups for Tour so that continuous Group operations can be carried out. The TOUR SETUP menu is only available for an SPD series. (5-1) TOUR Setup ① At the [PTZ SETUP 1 ▶ ] menu, press the 4 button (see p.
《 20 》 PTZ Mode GROUP 1 T OUR GROUP 3.
《 21 》 PTZ Mode (6) MODEL ■ This menu is for setting the PTZ camera ID and camera type. ① At the [PTZ SETUP 1 ▶ ] menu, press the ▶▶ button (see p.
《 22 》 PTZ Mode (7) TRACE ■ This menu is for inputting camera movements, through joystick or camera control buttons, into the memory for a certain period of time, to allow repeating of stored movements when performing the Trace (PATTERN) function.
《 23 》 PTZ Mode (8) AF (Auto-Focus) ■ This menu is for adjusting camera focus manually or automatically after camera operation. If AF is set to OFF in the camera setup menu, set the AF of the controller to ON and then automatic adjustment is performed after camera operation.
《 24 》 PTZ Mode (9) OSD ■ This is used for displaying the camera menu on the monitor. ① At the initial screen, press the OSD button. ② Use the controller buttons to set up the camera menu.
《 25 》 DVR Mode DVR MODEL Setup ■ This menu is for setting the DVR ID and model for operation by a controller. Sub-controllers cannot be used if the master controller is in Setup mode. ① At the initial screen, press the FUNCTION button and press the 0 button to activate the [SETUP SYSTEM] menu.
《 26 》 Controller Mode (1) Controller Setup Mode ■ Sub-controllers cannot be operated if the master controller is in setup mode. ① At the initial screen, press the FUNCTION button and press the 0 button to activate the [SETUP SYSTEM] menu. ② Press the 3 button to activate the [Controller SETUP 1 ▶ ] menu.
《 27 》 Controller Mode (2) Controller ID Setup ■ This menu is for setting controller ID. ① At the [Controller SETUP 1 ▶ ] menu, press the 1 button (see p.26). ② Press a number on the number pad to enter a controller ID. ③ Press the ENTER button to set the controller ID.
《 28 》 Controller Mode (4) DATA COPY ■ This menu is for copying master controller menu data to a sub-controller. The controller ID value is not copied. ① At the [Controller SETUP 1 ▶ ] menu, press the 3 button (see p.26). ② Press a number on the number pad to enter the ID number for the sub- controller where the data will be copied.
《 29 》 Controller Mode (5) RESPONSE ■ If the camera RESPONSE is set to two-way reception (RESPONSE ON), the controller RESPONSE menu must be set to ON. If the camera RESPONSE is set to one-way reception (RESPONSE OFF), the controller RESPONSE menu must be set to OFF.
《 30 》 Controller Mode ▤ For information on camera RESPONSE settings (DIP switch settings), refer to the camera manual. (5-1) SPD-1600 DIP Setup ON OFF DIP-SW 1 Not used DIP-SW 2 Reserved DIP-SW.
《 31 》 Controller Mode (6) PASSWORD ■ This menu is for setting the password to enter when changing controller setup values upon power-on. (6-1) PASSWORD Setup ① At the [Controller SETUP 1 ▶ ] menu, press the ▶▶ button (see p.26). ② Press the 2 button to activate the Password Setup screen.
《 32 》 Controller Mode (6-2) Applying Password – Setup Mode ① At the Password Setup screen, press the 2 button. ② Press the 1 button to ask for a password every time the setup mode is selected. Press the 2 button to skip asking for a password.
《 33 》 Controller Mode (7) PRIORITY ■ This menu is for setting the connected sub-controller to use a PTZ camera or DVR within the specified restrictions. This menu is available for master controller (ID: 1) only. ① At the [Controller SETUP 1 ▶ ] menu, press the ▶▶ button twice (see p.
《 34 》 Controller Mode (8) DEFAULT ■ This menu is for resetting the changed controller setup values to the default values. ① At the [Controller SETUP 1 ▶ ] menu, press the ▶▶ button twice (see p.26). ② Press the 2 button to open the Default Setup screen.
《 35 》 REFERENCE (1) Swing, Group Movement Speed ▤ For Swing setup, the speed setup value can be 240 ˚ /second for pan, and 180 ˚ /second for tilt. Setup value Degrees / second Setup value Degrees / second Setup value Degrees / second Setup value Degrees / second 1 0.
《 36 》 REFERENCE X X X X X X X X X X X X X X X X X X X X X X X X X X X X X RX+ RX- X X RX+ RX- X X RX+ RX- GRD TX+ TX- RX+ RX- TX+ TX- RX+ RX- TX+ TX- RX+ RX- TX+ TX- RX+ RX- TX+ TX- RX+ RX- TX+ T.
《 37 》 REFERENCE (3) RS-485/422 Pin Layout (D_SUB_FEMALE) Terminal Name 1 +12V 2 RX+ (RS-485+) PORT1 3 RX- (RS-485-) PORT1 4 TX- PORT1 5 TX+ PORT1 6 - 7 RX+ (RS-485 +) PORT2 8 RX- (RS-485 -) PORT2.
《 38 》 REFERENCE (5) Controller Specifications MODEL SCC-3000 Power (Consumption) 12VDC(Max 700mA) Control DVR & Speed Dome (SPD-2500, 1600, 2200) PTZ Control SPD-2500, 1600, 2200 all function.
P/No.:6806-0586-01A SALES NETWORK SAMSUNG TECHWIN CO., LTD. 145-3, Sangdaewon 1-Dong, Jungwon-Gu, Sungnam, Kyungki-Do, Korea 462-703 TEL: +82-31-740-8137~8141 FAX: +82-31-740-8145 SAMSUNG OPTO-ELECTRONICS AMERICA, INC. ELECTORONIC IMAGING DIV. 40 Seaview Drive, Secaucus NJ 07094, U.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Samsung SCC-3000 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Samsung SCC-3000 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Samsung SCC-3000 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Samsung SCC-3000 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Samsung SCC-3000, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Samsung SCC-3000.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Samsung SCC-3000. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Samsung SCC-3000 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
